Space systems miniaturization has been increasingly popular for the past decades, with over 1600 CubeSats and 300 sub-CubeSat sized spacecraft estimated to have been launched since 1998. This trend towards decreasing size enables the execution of unprecedented missions in terms of quantity, cost and development time, allowing for massively distributed satellite networks, and rapid prototyping of space equipment. Pocket-sized spacecraft can be designed in-house in less than a year and can reach weights of less than 10g, reducing the considerable effort typically associated with orbital flight. However, while Systems Engineering methodologies have been proposed for missions down to CubeSat size, there is still a gap regarding design approaches for picosatellites and smaller spacecraft, which can exploit their potential for iterative and accelerated development. In this paper, we propose a Systems Engineering methodology that abstains from the classic waterfall-like approach in favor of agile practices, focusing on available capabilities, delivery of features and design "sprints". Our method, originating from the software engineering disciplines, allows quick adaptation to imposed constraints, changes to requirements and unexpected events (e.g. chip shortages or delays), by making the design flexible to well-defined modifications. Two femtosatellite missions, currently under development and due to be launched in 2023, are used as case studies for our approach, showing how miniature spacecraft can be designed, developed and qualified from scratch in 6 months or less. We claim that the proposed method can simultaneously increase confidence in the design and decrease turnaround time for extremely small satellites, allowing unprecedented missions to take shape without the overhead traditionally associated with sending cutting-edge hardware to space.
Model Evaluation of a Transformable CubeSat for Nonholonomic Attitude Reorientation Using a Drop Tower
Faculty of System Informatics, Kobe University(神户大学系统信息学系);Department of Mechanical Engineering, Aoyama Gakuin University(山梨大学机械工程系);Department of Applied Mechanics and Aerospace Engineering, Waseda University(早稻田大学应用力学与航空工程系)
Demonstrating high-precision photometry with a CubeSat: ASTERIA observations of 55 Cancri e
ASTERIA(Arcsecond Space Telescope Enhancing Research In Astrophysics)是一个6 U CubeSat空间望远镜(10 cm x 20 cm x 30 cm,10 kg)。ASTERIA的主要飞行任务目标是演示减少光度观测系统噪声的两项关键技术:高精度指向控制和高稳定性热控制。ASTERIA在其主要飞行任务期间展示了0.5角秒RMS指向稳定性和$\pm$ 10毫开尔文的相机有效载荷热控制,与ASTERIA大小和质量级别的其他航天器相比,在指向和热性能方面有了显著改进。ASTERIA于2017年8月发射,2017年11月从国际空间站(ISS)部署。在主要任务(2017年11月-2018年2月)和随后的第一次延长任务(2018年3月-2018年5月)期间,ASTERIA进行了机会主义科学观测,其中包括收集55 Cancri的光度数据,这是一个附近的系外行星系统,有一颗超级地球过境行星。55 Cancri数据使用自定义流水线减少,以校正CMOS检测器列相关增益变化。一个马尔可夫链蒙特卡罗(MCMC)方法被用来同时使用一个简单的基线模型和适合过境模型的光度下降趋势。ASTERIA对已知的凌日系外行星55 Cancri e($\sim2$ ~ \Rearth)进行了边缘探测,测量了$374\pm170$ ppm的凌日深度。这是C…
The multi-physics analysis, design and testing of CUSP, a CubeSat mission for space weather and solar flares x-ray polarimetry
INAF-IAPS(意大利国家天体物理研究所-空间物理学与高能天体物理学研究所);Department of Industrial, Electronic and Mechanical Engineering, ”Roma Tre” University(罗马第三大学工业、电子和机械工程系);Department of Enterprise Engineering ”Mario Lucenti”, University of Rome ”Tor Vergata”(罗马托尔维加塔大学企业工程系马里奥·卢肯蒂);DEDA Connect s.r.l.(DEDA Connect有限公司);DEIM, University of ”La Tuscia”(拉图西亚大学DEIM系);ASI(意大利航天局);INAF-OAS Bologna(意大利国家天体物理研究所-博洛尼亚天文台);INAF-OAR(意大利国家天体物理研究所-罗马天文台);IMT s.r.l.(IMT有限公司);Alma Mater Studiorum University of Bologna - Department of Industrial Engineering and Interdepartmental Center for Industrial Aerospace Research(博洛尼亚大学工业工程系及跨部门工业航空航天研究中心);INAF-Headquarters(意大利国家天体物理研究所总部);INAF-OACT(意大利国家天体物理研究所-卡塔尼亚天文台);INFN-Bologna(意大利国家核物理研究所-博洛尼亚分部)
The CUSP CubeSat mission for space weather multi-physics analysis, design, and testing
INAF-IAPS(意大利国家天体物理研究所-空间物理学与等离子体动力学研究所);INAF-OAS Bologna(意大利国家天体物理研究所-博洛尼亚天文台);INAF-OAR(意大利国家天体物理研究所-阿斯特罗菲西卡观测站);INAF-OACT(意大利国家天体物理研究所-卡塔尼亚天文台);INAF-Headquarters(意大利国家天体物理研究所总部);Department of Industrial, Electronic and Mechanical Engineering, Roma Tre University(罗马第三大学工业、电子与机械工程系);Department of Physics and Geology, University of Perugia(佩鲁贾大学物理与地质学系);INFN Sezione di Perugia(意大利国家核物理研究所佩鲁贾分部);IMT s.r.l.(IMT有限公司);Interdepartmental Centre for Industrial Aerospace Research - Alma Mater Studiorum Università di Bologna(博洛尼亚大学跨部门航空航天工业研究中心);Department of Industrial Engineering - Alma Mater Studiorum Università di Bologna(博洛尼亚大学工业工程系);DEDA Connect s.r.l.(DEDA Connect有限公司);DEIM, University of Tuscia(图斯卡大学数字与环境工程与设计系);DIBAF, University of Tuscia(图斯卡大学农业、食品、林业与环境科学系);ASI(意大利国家航天局);INFN Sezione di Bologna(意大利国家核物理研究所博洛尼亚分部)
In orbit background for hard X-ray CubeSat polarimeters: case study of the CUSP mission in low-earth orbit
INAF-IAPS(意大利国家天体物理研究所-空间天文物理研究所);Roma Tre University(罗马三大学);University of Rome Tor Vergata(罗马托尔维加塔大学);DEDA Connect s.r.l.(DEDA Connect有限公司);University of Tuscia(图斯卡大学);ASI(意大利航天局);INAF-OAS Bologna(意大利国家天体物理研究所-博洛尼亚天文台);INAF-OAR(意大利国家天体物理研究所-阿布鲁齐天文台);IMT s.r.l.(IMT有限公司);Alma Mater Studiorum University of Bologna(博洛尼亚大学);Interdepartmental Centre for Industrial Aerospace Research - Alma Mater Studiorum University of Bologna(博洛尼亚大学跨部门工业航空航天研究中心);INAF-Headquarters(意大利国家天体物理研究所总部);INAF-OACT(意大利国家天体物理研究所-卡塔尼亚天文台);INFN Bologna Section(意大利国家核物理研究所博洛尼亚分部)
CubeSats通常用于从空间进行低成本测光。然而,空间光谱学仍然是更大平台的专属领域。恒星物理学和系外行星研究等关键天体物理学问题需要在数周或数月内从太空进行不间断的光谱监测。不幸的是,这些大型平台无法负担对单个源的这种监测。通过CUBESPEC,我们计划为天文学界提供一种低成本的CubeSat解决方案,用于近紫外/光学/近红外光谱,从而实现此类观测。CUBESPEC是一款通用的光谱仪,可以通过最小的硬件更改进行配置,以提供具有非常大光谱覆盖范围(200- 1000 nm)的低分辨率(R=100)以及在选定波长范围内的高分辨率(R= 30,000)。它是围绕一个离轴卡塞格伦望远镜和一个狭缝摄谱仪与可配置的色散元件。CUBESPEC将使用一个紧凑的姿态确定和控制系统,用于整个航天器的粗略指向,并辅以一个精细制导系统,该系统使用快速转向镜将光源集中在光谱仪狭缝上,并消除卫星抖动。极其紧凑的光学设计使我们能够将该仪器容纳在体积仅为10 x20 x30 cm $^{3}$的6 U CubeSat中,同时保留约1000 μ m的最大入射光瞳。9x19 cm $^{2}$。在本文中,我们概述了CUBESPEC项目,讨论了其最相关的科学案例,并介绍了仪器的设计。