Data is a fundamental building block for LiDAR perception systems. Unfortunately, real-world data collection and annotation is extremely costly & laborious. Recently, real data based LiDAR simulators have shown tremendous potential to complement real data, due to their scalability and high-fidelity compared to graphics engine based methods. Before simulation can be deployed in the real-world, two shortcomings need to be addressed. First, existing methods usually generate data which are more noisy and complete than the real point clouds, due to 3D reconstruction error and pure geometry-based raycasting method. Second, prior works on simulation for object detection focus solely on rigid objects, like cars, but VRUs, like pedestrians, are important road participants. To tackle the first challenge, we propose FPA raycasting and surrogate model raydrop. FPA enables the simulation of both point cloud coordinates and sensor features, while taking into account reconstruction noise. The ray-wise surrogate raydrop model mimics the physical properties of LiDAR's laser receiver to determine whether a simulated point would be recorded by a real LiDAR. With minimal training data, the surrogate model can generalize to different geographies and scenes, closing the domain gap between raycasted and real point clouds. To tackle the simulation of deformable VRU simulation, we employ SMPL dataset to provide a pedestrian simulation baseline and compare the domain gap between CAD and reconstructed objects. Applying our pipeline to perform novel sensor synthesis, results show that object detection models trained by simulation data can achieve similar result as the real data trained model.
The current LiDAR SLAM (Simultaneous Localization and Mapping) system suffers greatly from low accuracy and limited robustness when faced with complicated circumstances. From our experiments, we find that current LiDAR SLAM systems have limited performance when the noise level in the obtained point clouds is large. Therefore, in this work, we propose a general framework to tackle the problem of denoising and loop closure for LiDAR SLAM in complex environments with many noises and outliers caused by reflective materials. Current approaches for point clouds denoising are mainly designed for smal…
Southern University of Science and Technology（南方科技大学）；Jimei University（集美大学）
Lidar point cloud distortion from moving object is an important problem in autonomous driving, and recently becomes even more demanding with the emerging of newer lidars, which feature back-and-forth scanning patterns. Accurately estimating moving object velocity would not only provide a tracking capability but also correct the point cloud distortion with more accurate description of the moving object. Since lidar measures the time-of-flight distance but with a sparse angular resolution, the measurement is precise in the radial measurement but lacks angularly. Camera on the other hand provides…
IRSEEM, ESIGELEC（IRSEEM，ESIGELEC）；CEREMA；University of Rouen（鲁昂大学）
In this paper, we investigate the impact of different kind of car trajectories on LiDAR scans. In fact, LiDAR scanning speeds are considerably slower than car speeds introducing distortions. We propose a method to overcome this issue as well as new metrics based on CAN bus data. Our results suggest that the vehicle trajectory should be taken into account when building 3D large-scale maps from a LiDAR mounted on a moving vehicle.
University of Oxford（牛津大学）；The Hong Kong Polytechnic University（香港理工大学）；Imperial College London（帝国理工学院）
In this paper, we present a novel end-to-end learning-based LiDAR relocalization framework, termed PointLoc, which infers 6-DoF poses directly using only a single point cloud as input, without requiring a pre-built map. Compared to RGB image-based relocalization, LiDAR frames can provide rich and robust geometric information about a scene. However, LiDAR point clouds are unordered and unstructured making it difficult to apply traditional deep learning regression models for this task. We address this issue by proposing a novel PointNet-style architecture with self-attention to efficiently estim…
An accurate and computationally efficient SLAM algorithm is vital for modern autonomous vehicles. To make a lightweight the algorithm, most SLAM systems rely on feature detection from images for vision SLAM or point cloud for laser-based methods. Feature detection through a 3D point cloud becomes a computationally challenging task. In this paper, we propose a feature detection method by projecting a 3D point cloud to form an image and apply the vision-based feature detection technique. The proposed method gives repeatable and stable features in a variety of environments. Based on such features…
Leddar PixSet is a new publicly available dataset (dataset.leddartech.com) for autonomous driving research and development. One key novelty of this dataset is the presence of full-waveform data from the Leddar Pixell sensor, a solid-state flash LiDAR. Full-waveform data has been shown to improve the performance of perception algorithms in airborne applications but is yet to be demonstrated for terrestrial applications such as autonomous driving. The PixSet dataset contains approximately 29k frames from 97 sequences recorded in high-density urban areas, using a set of various sensors (cameras, …
Current neural networks-based object detection approaches processing LiDAR point clouds are generally trained from one kind of LiDAR sensors. However, their performances decrease when they are tested with data coming from a different LiDAR sensor than the one used for training, i.e., with a different point cloud resolution. In this paper, R-AGNO-RPN, a region proposal network built on fusion of 3D point clouds and RGB images is proposed for 3D object detection regardless of point cloud resolution. As our approach is designed to be also applied on low point cloud resolutions, the proposed metho…
ANSYS France（ANSYS法国公司）；ENSTA Paris, Institut Polytechnique de Paris（巴黎高等先进技术学院，巴黎理工学院）
LiDAR sensors provide rich 3D information about their surrounding{s} and are becoming increasingly important for autonomous vehicles tasks such as {localization}, semantic segmentation, object detection, and tracking. {Simulation} accelerates the testing, validation, and deployment of autonomous vehicles while {also} reducing cost and eliminating the risks of testing in real-world scenarios. We address the problem of high-fidelity LiDAR simulation and present a pipeline that leverages real-world point clouds acquired by mobile mapping systems. Point-based geometry representations, more specifi…
Hong Kong Polytechnic University（香港理工大学）；Nanjing University of Science and Technology（南京理工大学）
LiDAR-based SLAM algorithms are extensively studied to providing robust and accurate positioning for autonomous driving vehicles (ADV) in the past decades. Satisfactory performance can be obtained using high-grade 3D LiDAR with 64 channels, which can provide dense point clouds. Unfortunately, the high price significantly prevents its extensive commercialization in ADV. The cost-effective 3D LiDAR with 16 channels is a promising replacement. However, only limited and sparse point clouds can be provided by the 16 channels LiDAR, which cannot guarantee sufficient positioning accuracy for ADV in c…
Increasing the density of the 3D LiDAR point cloud is appealing for many applications in robotics. However, high-density LiDAR sensors are usually costly and still limited to a level of coverage per scan (e.g., 128 channels). Meanwhile, denser point cloud scans and maps mean larger volumes to store and longer times to transmit. Existing works focus on either improving point cloud density or compressing its size. This paper aims to design a novel 3D point cloud representation that can continuously increase point cloud density while reducing its storage and transmitting size. The pipeline of the…
We introduce a simple yet effective fusion method of LiDAR and RGB data to segment LiDAR point clouds. Utilizing the dense native range representation of a LiDAR sensor and the setup calibration, we establish point correspondences between the two input modalities. Subsequently, we are able to warp and fuse the features from one domain into the other. Therefore, we can jointly exploit information from both data sources within one single network. To show the merit of our method, we extend SqueezeSeg, a point cloud segmentation network, with an RGB feature branch and fuse it into the original str…
University of California Los Angeles（加州大学洛杉矶分校）；NASA Jet Propulsion Laboratory, California Institute of Technology（加州理工学院 NASA 喷气推进实验室）
Field robotics in perceptually-challenging environments require fast and accurate state estimation, but modern LiDAR sensors quickly overwhelm current odometry algorithms. To this end, this paper presents a lightweight frontend LiDAR odometry solution with consistent and accurate localization for computationally-limited robotic platforms. Our Direct LiDAR Odometry (DLO) method includes several key algorithmic innovations which prioritize computational efficiency and enables the use of dense, minimally-preprocessed point clouds to provide accurate pose estimates in real-time. This is achieved t…
ShanghaiTech University（上海科技大学）；University of Chinese Academy of Sciences（中国科学院大学）；Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences（中国科学院上海微系统与信息技术研究所）
Large-scale colored point clouds have many advantages in navigation or scene display. Relying on cameras and LiDARs, which are now widely used in reconstruction tasks, it is possible to obtain such colored point clouds. However, the information from these two kinds of sensors is not well fused in many existing frameworks, resulting in poor colorization results, thus resulting in inaccurate camera poses and damaged point colorization results. We propose a novel framework called Camera Pose Augmentation (CP+) to improve the camera poses and align them directly with the LiDAR-based point cloud. I…
University of Rochester（罗切斯特大学）；PerceptIn, Inc.（感知智能公司）
Compressing massive LiDAR point clouds in real-time is critical to autonomous machines such as drones and self-driving cars. While most of the recent prior work has focused on compressing individual point cloud frames, this paper proposes a novel system that effectively compresses a sequence of point clouds. The idea to exploit both the spatial and temporal redundancies in a sequence of point cloud frames. We first identify a key frame in a point cloud sequence and spatially encode the key frame by iterative plane fitting. We then exploit the fact that consecutive point clouds have large overl…
Micro-aerial vehicles (MAVs) are becoming ubiquitous across multiple industries and application domains. Lightweight MAVs with only an onboard flight controller and a minimal sensor suite (e.g., IMU, vision, and vertical ranging sensors) have potential as mobile and easily deployable sensing platforms. When deployed from a ground robot, a key parameter is a relative localization between the ground robot and the MAV. This paper proposes a novel method for tracking MAVs in lidar point clouds. In lidar point clouds, we consider the speed and distance of the MAV to actively adapt the lidar's frame…
China University of Mining and Technology（中国矿业大学）；Shanghai Jiao Tong University（上海交通大学）
In the existing methods, LiDAR odometry shows superior performance, but visual odometry is still widely used for its price advantage. Conventionally, the task of visual odometry mainly rely on the input of continuous images. However, it is very complicated for the odometry network to learn the epipolar geometry information provided by the images. In this paper, the concept of pseudo-LiDAR is introduced into the odometry to solve this problem. The pseudo-LiDAR point cloud back-projects the depth map generated by the image into the 3D point cloud, which changes the way of image representation. C…
Nanjing University of Science and Technology（南京理工大学）；University of Macau（澳门大学）；MIT（麻省理工学院）
In this paper, a global descriptor for a LiDAR point cloud, called LiDAR Iris, is proposed for fast and accurate loop-closure detection. A binary signature image can be obtained for each point cloud after several LoG-Gabor filtering and thresholding operations on the LiDAR-Iris image representation. Given two point clouds, their similarities can be calculated as the Hamming distance of two corresponding binary signature images extracted from the two point clouds, respectively. Our LiDAR-Iris method can achieve a pose-invariant loop-closure detection at a descriptor level with the Fourier trans…
Ground surface detection in point cloud is widely used as a key module in autonomous driving systems. Different from previous approaches which are mostly developed for lidars with high beam resolution, e.g. Velodyne HDL-64, this paper proposes ground detection techniques applicable to much sparser point cloud captured by lidars with low beam resolution, e.g. Velodyne VLP-16. The approach is based on the RANSAC scheme of plane fitting. Inlier verification for plane hypotheses is enhanced by exploiting the point-wise tangent, which is a local feature available to compute regardless of the densit…
Image-to-Point Cloud Registration Made Easy with Rectified Flow-based LiDAR Upsampling
Department of Computer Science and Engineering, Toyohashi University of Technology（丰桥技术科学大学计算机科学与工程系）；National Institute of Advanced Industrial Science and Technology（国立先进工业科学技术研究所）
The light detection and ranging (LiDAR) technology allows to sense surrounding objects with fine-grained resolution in a large areas. Their data (aka point clouds), generated continuously at very high rates, can provide information to support automated functionality in cyberphysical systems. Clustering of point clouds is a key problem to extract this type of information. Methods for solving the problem in a continuous fashion can facilitate improved processing in e.g. fog architectures, allowing continuous, streaming processing of data close to the sources. We propose Lisco, a single-pass cont…
In this paper, we introduce a deep encoder-decoder network, named SalsaNet, for efficient semantic segmentation of 3D LiDAR point clouds. SalsaNet segments the road, i.e. drivable free-space, and vehicles in the scene by employing the Bird-Eye-View (BEV) image projection of the point cloud. To overcome the lack of annotated point cloud data, in particular for the road segments, we introduce an auto-labeling process which transfers automatically generated labels from the camera to LiDAR. We also explore the role of imagelike projection of LiDAR data in semantic segmentation by comparing BEV wit…
Skolkovo Institute of Science and Technology（斯科尔科沃科学技术研究院）
In this study, we propose a novel visual localization approach to accurately estimate six degrees of freedom (6-DoF) poses of the robot within the 3D LiDAR map based on visual data from an RGB camera. The 3D map is obtained utilizing an advanced LiDAR-based simultaneous localization and mapping (SLAM) algorithm capable of collecting a precise sparse map. The features extracted from the camera images are compared with the points of the 3D map, and then the geometric optimization problem is being solved to achieve precise visual localization. Our approach allows employing a scout robot equipped …
In this preliminary work we attempt to apply submanifold sparse convolution to the task of 3D person detection. In particular, we present Person-MinkUNet, a single-stage 3D person detection network based on Minkowski Engine with U-Net architecture. The network achieves a 76.4% average precision (AP) on the JRDB 3D detection benchmark.
Light Detection And Ranging (LiDAR) has been widely used in autonomous vehicles for perception and localization. However, the cost of a high-resolution LiDAR is still prohibitively expensive, while its low-resolution counterpart is much more affordable. Therefore, using low-resolution LiDAR for autonomous driving is an economically viable solution, but the point cloud sparsity makes it extremely challenging. In this paper, we propose a two-stage neural network framework that enables 3D object detection using a low-resolution LiDAR. Taking input from a low-resolution LiDAR point cloud and a mon…
HeLiMOS: A Dataset for Moving Object Segmentation in 3D Point Clouds From Heterogeneous LiDAR Sensors
School of Electrical Engineering, KAIST (Korea Advanced Institute of Science and Technology)（韩国科学技术院电气工程学院）；Center for Robotics, University of Bonn（波恩大学机器人中心）；Lamarr Institute for Machine Learning and Artificial Intelligence（拉马尔机器学习与人工智能研究所）
Australian Centre for Field Robotics（澳大利亚野外机器人中心）；University of Sydney（悉尼大学）
The fusion of sensor data from heterogeneous sensors is crucial for robust perception in various robotics applications that involve moving platforms, for instance, autonomous vehicle navigation. In particular, combining camera and lidar sensors enables the projection of precise range information of the surrounding environment onto visual images. It also makes it possible to label each lidar point with visual segmentation/classification results for 3D mapping, which facilitates a higher level understanding of the scene. The task is however considered non-trivial due to intrinsic and extrinsic s…
LiDARs are usually more accurate than cameras in distance measuring. Hence, there is strong interest to apply LiDARs in autonomous driving. Different existing approaches process the rich 3D point clouds for object detection, tracking and recognition. These methods generally require two initial steps: (1) filter points on the ground plane and (2) cluster non-ground points into objects. This paper proposes a field-tested fast 3D point cloud segmentation method for these two steps. Our specially designed algorithms allow instantly process raw LiDAR data packets, which significantly reduce the pro…
SN-LiDAR: Semantic Neural Fields for Novel Space-time View LiDAR Synthesis
Shanghai Jiao Tong University（上海交通大学）；Ruijin Hospital, Shanghai Jiao Tong University School of Medicine（上海交通大学医学院附属瑞金医院）；Renji Hospital, Shanghai Jiao Tong University School of Medicine（上海交通大学医学院附属仁济医院）
Daimler AG（戴姆勒股份公司）；Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院）
Lidar sensors are frequently used in environment perception for autonomous vehicles and mobile robotics to complement camera, radar, and ultrasonic sensors. Adverse weather conditions are significantly impacting the performance of lidar-based scene understanding by causing undesired measurement points that in turn effect missing detections and false positives. In heavy rain or dense fog, water drops could be misinterpreted as objects in front of the vehicle which brings a mobile robot to a full stop. In this paper, we present the first CNN-based approach to understand and filter out such adver…
The use of infrastructure sensor technology for traffic detection has already been proven several times. However, extrinsic sensor calibration is still a challenge for the operator. While previous approaches are unable to calibrate the sensors without the use of reference objects in the sensor field of view (FOV), we present an algorithm that is completely detached from external assistance and runs fully automatically. Our method focuses on the high-precision fusion of LiDAR point clouds and is evaluated in simulation as well as on real measurements. We set the LiDARs in a continuous pendulum …
MTA SZTAKI, Hungarian Academy of Sciences, Institute for Computer Science and Control（匈牙利科学院计算机科学与控制研究所）
In this paper we deal with the problem of odometry and localization for Lidar-equipped vehicles driving in urban environments, where a premade target map exists to localize against. In our problem formulation, to correct the accumulated drift of the Lidar-only odometry we apply a place recognition method to detect geometrically similar locations between the online 3D point cloud and the a priori offline map. In the proposed system, we integrate a state-of-the-art Lidar-only odometry algorithm with a recently proposed 3D point segment matching method by complementing their advantages. Also, we …
Image-based fiducial markers are useful in problems such as object tracking in cluttered or textureless environments, camera (and multi-sensor) calibration tasks, and vision-based simultaneous localization and mapping (SLAM). The state-of-the-art fiducial marker detection algorithms rely on the consistency of the ambient lighting. This paper introduces LiDARTag, a novel fiducial tag design and detection algorithm suitable for light detection and ranging (LiDAR) point clouds. The proposed method runs in real-time and can process data at 100 Hz, which is faster than the currently available LiDAR…
National Taiwan University（国立台湾大学）；Mobile Drive Technology（移动驱动科技公司）
The large amount of data collected by LiDAR sensors brings the issue of LiDAR point cloud compression (PCC). Previous works on LiDAR PCC have used range image representations and followed the predictive coding paradigm to create a basic prototype of a coding framework. However, their prediction methods give an inaccurate result due to the negligence of invalid pixels in range images and the omission of future frames in the time step. Moreover, their handcrafted design of residual coding methods could not fully exploit spatial redundancy. To remedy this, we propose a coding framework BIRD-PCC. …
This paper presents a loop closure method to correct the long-term drift in LiDAR odometry and mapping (LOAM). Our proposed method computes the 2D histogram of keyframes, a local map patch, and uses the normalized cross-correlation of the 2D histograms as the similarity metric between the current keyframe and those in the map. We show that this method is fast, invariant to rotation, and produces reliable and accurate loop detection. The proposed method is implemented with careful engineering and integrated into the LOAM algorithm, forming a complete and practical system ready to use. To benefi…
Exploiting past 3D LiDAR scans to predict future point clouds is a promising method for autonomous mobile systems to realize foresighted state estimation, collision avoidance, and planning. In this paper, we address the problem of predicting future 3D LiDAR point clouds given a sequence of past LiDAR scans. Estimating the future scene on the sensor level does not require any preceding steps as in localization or tracking systems and can be trained self-supervised. We propose an end-to-end approach that exploits a 2D range image representation of each 3D LiDAR scan and concatenates a sequence o…
Dense-depth map guided deep Lidar-Visual Odometry with Sparse Point Clouds and Images
College of Physics and Optical Engineering, Shenzhen University（深圳大学物理与光学工程学院）；Research Institute of Tsinghua University in Shenzhen（清华大学深圳研究院）；YunJiZhiHui Engineering Co., Ltd.（云智慧工程有限公司）；Quantum Science Center of the Guangdong-Hong Kong-Macao Greater Bay Area（粤港澳大湾区量子科学中心）；State Key Laboratory of Radio Frequency Heterogeneous Integration, Shenzhen University（深圳大学射频异构集成重点实验室）；Institute of Intelligent Optical Measurement and Detection, Shenzhen University（深圳大学智能光学测量与探测研究所）
UC San Diego（加州大学圣地亚哥分校）；Waymo（Waymo公司）；Google（谷歌公司）
Semantic segmentation of LiDAR point clouds is an important task in autonomous driving. However, training deep models via conventional supervised methods requires large datasets which are costly to label. It is critical to have label-efficient segmentation approaches to scale up the model to new operational domains or to improve performance on rare cases. While most prior works focus on indoor scenes, we are one of the first to propose a label-efficient semantic segmentation pipeline for outdoor scenes with LiDAR point clouds. Our method co-designs an efficient labeling process with semi/weakl…
We propose a novel filter for segmenting the regions of interest from LiDAR 3D point cloud for multirotor aerial vehicles. It is specially targeted for real-time applications and works on sparse LiDAR point clouds without preliminary mapping. We use this filter as a crucial component of fast obstacle avoidance system for agriculture drone operating at low altitude. As the first step, each point cloud is transformed into a depth image and then identify places near to the vehicle (local maxima) by locating areas with high pixel densities. Afterwards, we merge the original depth image with identi…
