arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2210.08592physics.opticsphysics.ins-det
收藏

用于全光光声成像的快速询问波长调谐

Fast interrogation wavelength tuning for all-optical photoacoustic imaging

Jérémy Saucourt, Antonin Moreau, Julien Lumeau, Hervé Rigneault, Thomas Chaigne

AI总结:

针对光声成像中窄带激光器调谐缓慢限制采集速度的问题,提出使用宽带源和快速可调声光滤波器在微秒级调整询问波长,并验证了该方法在不均匀Fabry-Pérot传感器上的有效性。

摘要:

光声成像中的超声波光学检测在高声频下提供了大带宽和高灵敏度。因此,与传统压电检测相比,使用Fabry-Pérot腔传感器可以实现更高的空间分辨率。然而,在沉积传感聚合物层期间的制造约束要求对询问光束波长进行精确控制,以提供最佳灵敏度。这通常通过采用缓慢可调的窄带激光器作为询问源来实现,因此限制了采集速度。我们建议改用宽带源和快速可调声光滤波器,在几微秒内调整每个像素的询问波长。我们通过使用高度不均匀的Fabry-Pérot传感器进行光声成像,验证了该方法的有效性。

英文摘要:

Optical detection of ultrasound for photoacoustic imaging provides large bandwidth and high sensitivity at high acoustic frequencies. Higher spatial resolutions can therefore be achieved using Fabry-Pérot cavity sensors, as compared to conventional piezoelectric detection. However, fabrication constraints during deposition of the sensing polymer layer require a precise control of the interrogation beam wavelength to provide optimal sensitivity. This is commonly achieved by employing slowly tunable narrowband lasers as interrogation sources, hence limiting the acquisition speed. We propose instead to use a broadband source and a fast tunable acousto-optic filter to adjust the interrogation wavelength at each pixel within a few microseconds. We demonstrate the validity of this approach by performing photoacoustic imaging with a highly inhomogeneous Fabry-Pérot sensor.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑