In this paper, a novel knowledge-based genetic algorithm for path planning of a mobile robot in unstructured complex environments is proposed, where five problem-specific operators are developed for efficient robot path planning. The proposed genetic algorithm incorporates the domain knowledge of robot path planning into its specialized operators, some of which also combine a local search technique. A unique and simple representation of the robot path is proposed and a simple but effective path evaluation method is developed, where the collisions can be accurately detected and the quality of a robot path is well reflected. The proposed algorithm is capable of finding a near-optimal robot path in both static and dynamic complex environments. The effectiveness and efficiency of the proposed algorithm are demonstrated by simulation studies. The irreplaceable role of the specialized genetic operators in the proposed genetic algorithm for solving the robot path planning problem is demonstrated through a comparison study.
Faculty of Biomedical Sciences, USI（瑞士意大利语区大学生物医学学院）；Faculty of Informatics, USI（瑞士意大利语区大学信息学院）
Educational robots allow experimenting with a variety of principles from mechanics, electronics, and informatics. Here we propose ClipBot, a low-cost, do-it-yourself, robot whose skeleton is made of two paper clips. An Arduino nano microcontroller actuates two servo motors that move the paper clips. However, such mechanical configuration confers physical impairments to movement. This creates the need for and allows experimenting with artificial intelligence methods to overcome hardware limitations. We report our experience in the usage of this robot during the study week 'fascinating informati…
Reliable real-time planning for robots is essential in today's rapidly expanding automated ecosystem. In such environments, traditional methods that plan by relaxing constraints become unreliable or slow-down for kinematically constrained robots. This paper describes the algorithm Dynamic Motion Planning Networks (Dynamic MPNet), an extension to Motion Planning Networks, for non-holonomic robots that address the challenge of real-time motion planning using a neural planning approach. We propose modifications to the training and planning networks that make it possible for real-time planning whi…
This paper presents a Genetic Programming (GP) approach to solving multi-robot path planning (MRPP) problems in single-lane workspaces, specifically those easily mapped to graph representations. GP's versatility enables this approach to produce programs optimizing for multiple attributes rather than a single attribute such as path length or completeness. When optimizing for the number of time steps needed to solve individual MRPP problems, the GP constructed programs outperformed complete MRPP algorithms, i.e. Push-Swap-Wait (PSW), by $54.1\%$. The GP constructed programs also consistently out…
In this paper we describe SYNERGY, which is a highly parallelizable, linear planning system that is based on the genetic programming paradigm. Rather than reasoning about the world it is planning for, SYNERGY uses artificial selection, recombination and fitness measure to generate linear plans that solve conjunctive goals. We ran SYNERGY on several domains (e.g., the briefcase problem and a few variants of the robot navigation problem), and the experimental results show that our planner is capable of handling problem instances that are one to two orders of magnitude larger than the ones solved…
This work was inspired by author experiences with a telescope scheduling. Author long time goal is to develop and further extend software for an autonomous observatory. The software shall provide users with all the facilities they need to take scientific images of the night sky, cooperate with other autonomous observatories, and possibly more. This works shows how genetic algorithm can be used for scheduling of a single observatory, as well as network of observatories.
University of Shanghai for Science and Technology（上海理工大学）；Virginia Polytechnic Institute and State University（弗吉尼亚理工学院暨州立大学）
Autonomous multi-robot optical inspection systems are increasingly applied for obtaining inline measurements in process monitoring and quality control. Numerous methods for path planning and robotic coordination have been developed for static and dynamic environments and applied to different fields. However, these approaches may not work for the autonomous multi-robot optical inspection system due to fast computation requirements of inline optimization, unique characteristics on robotic end-effector orientations, and complex large-scale free-form product surfaces. This paper proposes a novel t…
Robot planning in partially observable domains is difficult, because a robot needs to estimate the current state and plan actions at the same time. When the domain includes many objects, reasoning about the objects and their relationships makes robot planning even more difficult. In this paper, we develop an algorithm called scene analysis for robot planning (SARP) that enables robots to reason with visual contextual information toward achieving long-term goals under uncertainty. SARP constructs scene graphs, a factored representation of objects and their relations, using images captured from …
University of Paderborn（帕德博恩大学）；Leuphana University of Lüneburg（吕讷堡莱法纳大学）
This paper presents a collection of path planning algorithms for real-time movement of multiple robots across a Robotic Mobile Fulfillment System (RMFS). Robots are assigned to move storage units to pickers at working stations instead of requiring pickers to go to the storage area. Path planning algorithms aim to find paths for the robots to fulfill the requests without collisions or deadlocks. The state-of-the-art path planning algorithms, including WHCA*, FAR, BCP, OD&ID and CBS, were adapted to suit path planning in RMFS and integrated within a simulation tool to guide the robots from their…
This paper presents JEDAI, an AI system designed for outreach and educational efforts aimed at non-AI experts. JEDAI features a novel synthesis of research ideas from integrated task and motion planning and explainable AI. JEDAI helps users create high-level, intuitive plans while ensuring that they will be executable by the robot. It also provides users customized explanations about errors and helps improve their understanding of AI planning as well as the limits and capabilities of the underlying robot system.
Autonomous robots operating in large knowledgeintensive domains require planning in the discrete (task) space and the continuous (motion) space. In knowledge-intensive domains, on the one hand, robots have to reason at the highestlevel, for example the regions to navigate to or objects to be picked up and their properties; on the other hand, the feasibility of the respective navigation tasks have to be checked at the controller execution level. Moreover, employing multiple robots offer enhanced performance capabilities over a single robot performing the same task. To this end, we present an in…
With the development of robotics and artificial intelligence field unceasingly thorough, path planning as an important field of robot calculation has been widespread concern. This paper analyzes the current development of robot and path planning algorithm and focuses on the advantages and disadvantages of the traditional intelligent path planning as well as the path planning. The problem of mobile robot path planning is studied by using ant colony algorithm, and it also provides some solving methods.
University of California San Diego（加州大学圣地亚哥分校）；Purdue University（普渡大学）
Fast and efficient sampling-based motion planning (SMP) is an integral component of many robotic systems, such as autonomous cars. A popular technique to improve the efficiency of these planners is to restrict search space in the planning domain. Existing algorithms define parametric functions to bound the search space, but these do not extend to non-holonomic robotic systems. Recent learning-based methods use a combination of convolutional and fully connected networks to encode the planning space. However, these methods are restricted to fixed map sizes, which are often not realistic in the r…
Path planning for multiple robots is well studied in the AI and robotics communities. For a given discretized environment, robots need to find collision-free paths to a set of specified goal locations. Robots can be fully anonymous, non-anonymous, or organized in groups. Although powerful solvers for this abstract problem exist, they make simplifying assumptions by ignoring kinematic constraints, making it difficult to use the resulting plans on actual robots. In this paper, we present a solution which takes kinematic constraints, such as maximum velocities, into account, while guaranteeing a …
Fraunhofer Institute for Integrated Circuits IIS（弗劳恩霍夫集成电路研究所 IIS）；Friedrich-Alexander-University Erlangen-Nuremberg (FAU)（弗里德里希-亚历山大-埃尔兰根-纽伦堡大学（FAU））
This paper presents a novel motion and trajectory planning algorithm for nonholonomic mobile robots that uses recent advances in deep reinforcement learning. Starting from a random initial state, i.e., position, velocity and orientation, the robot reaches an arbitrary target state while taking both kinematic and dynamic constraints into account. Our deep reinforcement learning agent not only processes a continuous state space it also executes continuous actions, i.e., the acceleration of wheels and the adaptation of the steering angle. We evaluate our motion and trajectory planning on a mobile…
Navigating the Clutter: Waypoint-Based Bi-Level Planning for Multi-Robot Systems
UC Santa Barbara（加州大学圣芭芭拉分校）；Massachusetts Institute of Technology（麻省理工学院）；Harvard University（哈佛大学）；MIT-IBM Watson AI Lab（MIT-IBM沃森人工智能实验室）；Cisco Research（思科研究）
Federal Institute of Amazonas（亚马逊联邦学院）；Federal University of Amazonas（亚马逊联邦大学）；University of Oxford（牛津大学）
We describe and evaluate a novel optimization-based off-line path planning algorithm for mobile robots based on the Counterexample-Guided Inductive Optimization (CEGIO) technique. CEGIO iteratively employs counterexamples generated from Boolean Satisfiability (SAT) and Satisfiability Modulo Theories (SMT) solvers, in order to guide the optimization process and to ensure global optimization. This paper marks the first application of CEGIO for planning mobile robot path. In particular, CEGIO has been successfully applied to obtain optimal two-dimensional paths for autonomous mobile robots using …
Experience-based Refinement of Task Planning Knowledge in Autonomous Robots
School of Computing and Engineering, University of Huddersfield（哈德斯菲尔德大学计算与工程学院）；School of Human and Health Sciences, University of Huddersfield（哈德斯菲尔德大学人类与健康科学学院）
University of Southern California（南加利福尼亚大学）；Robert Bosch GmbH（罗伯特·博世股份有限公司）
Planning smooth and energy-efficient motions for wheeled mobile robots is a central task for applications ranging from autonomous driving to service and intralogistic robotics. Over the past decades, a wide variety of motion planners, steer functions and path-improvement techniques have been proposed for such non-holonomic systems. With the objective of comparing this large assortment of state-of-the-art motion-planning techniques, we introduce a novel open-source motion-planning benchmark for wheeled mobile robots, whose scenarios resemble real-world applications (such as navigating warehouse…
An important capability of autonomous multi-robot systems is to prevent collision among the individual robots. One approach to this problem is to plan conflict-free trajectories and let each of the robots follow its pre-planned trajectory. A widely used practical method for multi-robot trajectory planning is prioritized planning, which has been shown to be effective in practice, but is in general incomplete. Formal analysis of instances that are provably solvable by prioritized planning is still missing. Moreover, prioritized planning is a centralized algorithm, which may be in many situations…
Precise coordinated planning over a forward time window enables safe and highly efficient motion when many robots must work together in tight spaces, but this would normally require centralised control of all devices which is difficult to scale. We demonstrate GBP Planning, a new purely distributed technique based on Gaussian Belief Propagation for multi-robot planning problems, formulated by a generic factor graph defining dynamics and collision constraints over a forward time window. In simulations, we show that our method allows high performance collaborative planning where robots are able …
Peoples’ Friendship University of Russia (RUDN University)（俄罗斯人民友谊大学（RUDN大学））；Federal Research Center “Computer Science and Control” of Russian Academy of Sciences（俄罗斯科学院“计算机科学与控制”联邦研究中心）；National Research University Higher School of Economics（高等经济学院国家研究大学）
We study the problem of planning collision-free paths for a group of homogeneous robots. We propose a novel approach for turning the paths that were planned egocentrically by the robots, e.g. without taking other robots' moves into account, into collision-free trajectories and evaluate it empirically. Suggested algorithm is much faster (up to one order of magnitude) than state-of-the-art but this comes at the price of notable drop-down of the solution cost.
In this paper, we look into the minimum obstacle displacement (MOD) planning problem from a mobile robot motion planning perspective. This problem finds an optimal path to goal by displacing movable obstacles when no path exists due to collision with obstacles. However this problem is computationally expensive and grows exponentially in the size of number of movable obstacles. This work looks into approximate solutions that are computationally less intensive and differ from the optimal solution by a factor of the optimal cost.
Motion planning is a difficult problem in robot control. The complexity of the problem is directly related to the dimension of the robot's configuration space. While in many theoretical calculations and practical applications the configuration space is modeled as a continuous space, we present a discrete robot model based on the fundamental hardware specifications of a robot. Using lattice path methods, we provide estimates for the complexity of motion planning by counting the number of possible trajectories in a discrete robot configuration space.
There is increasing demand for automated systems that can fabricate 3D structures. Robotic spatial extrusion has become an attractive alternative to traditional layer-based 3D printing due to a manipulator's flexibility to print large, directionally-dependent structures. However, existing extrusion planning algorithms require a substantial amount of human input, do not scale to large instances, and lack theoretical guarantees. In this work, we present a rigorous formalization of robotic spatial extrusion planning and provide several efficient and probabilistically complete planning algorithms.…
In this study, we propose task planning framework for multiple robots that builds on a behavior tree (BT). BTs communicate with a data distribution service (DDS) to send and receive data. Since the standard BT derived from one root node with a single tick is unsuitable for multiple robots, a novel type of BT action and improved nodes are proposed to control multiple robots through a DDS asynchronously. To plan tasks for robots efficiently, a single task planning unit is implemented with the proposed task types. The task planning unit assigns tasks to each robot simultaneously through a single …
In this paper, we deal with the problem of full-body path planning for walking robots. The state of walking robots is defined in multi-dimensional space. Path planning requires defining the path of the feet and the robot's body. Moreover, the planner should check multiple constraints like static stability, self-collisions, collisions with the terrain, and the legs' workspace. As a result, checking the feasibility of the potential path is time-consuming and influences the performance of a planning method. In this paper, we verify the feasibility of sampling-based planners in the path planning t…
The Chinese University of Hong Kong（香港中文大学）；University of Cambridge（剑桥大学）
Path planning for mobile robots in large dynamic environments is a challenging problem, as the robots are required to efficiently reach their given goals while simultaneously avoiding potential conflicts with other robots or dynamic objects. In the presence of dynamic obstacles, traditional solutions usually employ re-planning strategies, which re-call a planning algorithm to search for an alternative path whenever the robot encounters a conflict. However, such re-planning strategies often cause unnecessary detours. To address this issue, we propose a learning-based technique that exploits env…
Harbin Institute of Technology (Shenzhen)（哈尔滨工业大学（深圳））；The Chinese University of Hong Kong（香港中文大学）；The University of British Columbia（不列颠哥伦比亚大学）
There are many challenges for robot navigation in densely populated dynamic environments. This paper presents a survey of the path planning methods for robot navigation in dense environments. Particularly, the path planning in the navigation framework of mobile robots is composed of global path planning and local path planning, with regard to the planning scope and the executability. Within this framework, the recent progress of the path planning methods is presented in the paper, while examining their strengths and weaknesses. Notably, the recently developed Velocity Obstacle method and its v…
Motion planning for multi-jointed robots is challenging. Due to the inherent complexity of the problem, most existing works decompose motion planning as easier subproblems. However, because of the inconsistent performance metrics, only sub-optimal solution can be found by decomposition based approaches. This paper presents an optimal control based approach to address the path planning and trajectory planning subproblems simultaneously. Unlike similar works which either ignore robot dynamics or require long computation time, an efficient numerical method for trajectory optimization is presented…
Robot motion planning involves computing a sequence of valid robot configurations that take the robot from its initial state to a goal state. Solving a motion planning problem optimally using analytical methods is proven to be PSPACE-Hard. Sampling-based approaches have tried to approximate the optimal solution efficiently. Generally, sampling-based planners use uniform samplers to cover the entire state space. In this paper, we propose a deep-learning-based framework that identifies robot configurations in the environment that are important to solve the given motion planning problem. These st…
We investigate different approaches to integrating object recognition and planning in a tabletop manipulation domain with the set of objects used in the 2012 RoboCup@Work competition. Results of our preliminary experiments show that, with some approaches, close integration of perception and planning improves the quality of plans, as well as the computation times of feasible plans.
Many real-world robotic operations that involve high-dimensional humanoid robots require fast-reaction to plan disturbances and probabilistic guarantees over collision risks, whereas most probabilistic motion planning approaches developed for car-like robots can not be directly applied to high-dimensional robots. In this paper, we present probabilistic Chekov (p-Chekov), a fast-reactive motion planning system that can provide safety guarantees for high-dimensional robots suffering from process noises and observation noises. Leveraging recent advances in machine learning as well as our previous…
Mody Institute of Technology and Science（莫迪理工学院）；PEC University of Technology（旁遮普工程学院大学）
The paper presents the electronic design and motion planning of a robot based on decision making regarding its straight motion and precise turn using Artificial Neural Network (ANN). The ANN helps in learning of robot so that it performs motion autonomously. The weights calculated are implemented in microcontroller. The performance has been tested to be excellent.
Clemson University（克莱姆森大学）；Air Force Research Laboratory（美国空军研究实验室）
Symbolic motion planning for robots is the process of specifying and planning robot tasks in a discrete space, then carrying them out in a continuous space in a manner that preserves the discrete-level task specifications. Despite progress in symbolic motion planning, many challenges remain, including addressing scalability for multi-robot systems and improving solutions by incorporating human intelligence. In this paper, distributed symbolic motion planning for multi-robot systems is developed to address scalability. More specifically, compositional reasoning approaches are developed to decom…
Robots are widely used in industry due to their efficiency and high accuracy in performance. One of the most intriguing issues in manufacturing stage of production line is to minimize significantly high percentage of energy consumed by these robot manipulators. The energy optimal control of robotic manipulators is a complex problem, as it requires a deep understanding of the robot's kinematics and dynamic behaviors. This paper propose a novel method of energy efficient path planning of an industrial robot arm in a workspace with multiple obstacles using differential evolution (DE) algorithm. T…
Motion planning is a key element of robotics since it empowers a robot to navigate autonomously. Particle Swarm Optimization is a simple, yet a very powerful optimization technique which has been effectively used in many complex multi-dimensional optimization problems. This paper proposes a path planning algorithm based on particle swarm optimization for computing a shortest collision-free path for a mobile robot in environments populated with static convex obstacles. The proposed algorithm finds the optimal path by performing random sampling on grid lines generated between the robot start and…
This thesis studies the interference-free workspace (IFW) of arbitrary cable-driven robots (CDRs) for both cables and obstacles using the ray-based method. Continuing from this, the point-to-point path planning and verification technique to ensure that the resulting motion is within the workspace is also studied.
Task and motion planning (TAMP) algorithms have been developed to help robots plan behaviors in discrete and continuous spaces. Robots face complex real-world scenarios, where it is hardly possible to model all objects or their physical properties for robot planning (e.g., in kitchens or shopping centers). In this paper, we define a new object-centric TAMP problem, where the TAMP robot does not know object properties (e.g., size and weight of blocks). We then introduce Task-Motion Object-Centric planning ({\bf TMOC}), a grounded TAMP algorithm that learns to ground objects and their physical p…
We present a centralized algorithmic framework for solving multi-robot path planning problems in general, two-dimensional, continuous environments while minimizing globally the task completion time. The framework obtains high levels of effectiveness through the composition of an optimal discretization of the continuous environment and the subsequent fast, near-optimal resolution of the resulting discrete planning problem. This principled approach achieves orders of magnitudes better performance with respect to both speed and the supported robot density. For a wide variety of environments, our …
We study the computational complexity of optimally solving multi-robot path planning problems on planar graphs. For four common time- and distance-based objectives, we show that the associated path optimization problems for multiple robots are all NP-complete, even when the underlying graph is planar. Establishing the computational intractability of optimal multi-robot path planning problems on planar graphs has important practical implications. In particular, our result suggests the preferred approach toward solving such problems, when the number of robots is large, is to augment the planar e…
