A ubiquitous arrangement in nature is a free-flowing fluid coupled to a porous medium, for example a river or lake lying above a porous bed. Depending on the environmental conditions, thermal convection can occur and may be confined to the clear fluid region, forming shallow convection cells, or it can penetrate into the porous medium, forming deep cells. Here, we combine three complementary approaches -- linear stability analysis, fully nonlinear numerical simulations, and a coarse-grained model -- to determine the circumstances that lead to each configuration. The coarse-grained model yields an explicit formula for the transition between deep and shallow convection in the physically relevant limit of small Darcy number. Near the onset of convection, all three of the approaches agree, validating the predictive capability of the explicit formula. The numerical simulations extend these results into the strongly nonlinear regime, revealing novel hybrid configurations in which the flow exhibits a dynamic shift from shallow to deep convection. This hybrid shallow-to-deep convection begins with small, random initial data, progresses through a metastable shallow state, and arrives at the preferred steady-state of deep convection. We construct a phase diagram that incorporates information from all three approaches and depicts the regions in parameter space that give rise to each convective state.
In the above paper the authors treat the natural convection boundary layer flow in a Darcy-Brinkman-Forchheimer porous medium. In the energy equation the radiation effect has been taken into account. A two-parameter perturbation method is used for the solution of the equations. The first order results are presented in tables and figures. This is an interesting work but there are some weak points which are presented below:
In a range of physical systems, the first instability in Rayleigh-Bernard convection between nearly thermally insulating horizontal plates is large scale. This holds for thermal convection of fluids saturating porous media. Large-scale thermal convection in a horizontal layer is governed by remarkably similar equations both in the presence of a porous matrix and without it, with only one additional term for the latter case, which, however, vanishes under certain conditions (e.g., two-dimensional flows or infinite Prandtl number). We provide a rigorous derivation of long-wavelength equations fo…
We present a numerical study of convection in a horizontal layer comprising a fluid-saturated porous bed overlain by an unconfined fluid layer. Convection is driven by a vertical, destabilising temperature difference applied across the whole system, as in the canonical Rayleigh-Bénard problem. Numerical simulations are carried out using a single-domain formulation of the two-layer problem based on the Darcy-Brinkman equations. We explore the dynamics and heat flux through the system in the limit of large Rayleigh number, but small Darcy number, such that the flow exhibits vigorous convection i…
The problem of steady mixed convection boundary-layer flow on a cooled vertical permeable circular cylinder embedded in a fluid-saturated porous medium is studied. Here, we evaluate the flow and heat transfer characteristics numerically for various values of the governing parameters and demonstrate the existence of dual solutions beyond a critical point.
Convection heat transfer in porous media is a universal phenomenon in nature, and it is also frequently encountered in scientific and engineering fields. An in-depth understanding of the fundamental mechanism of convection heat transfer in porous media requires efficient and powerful numerical tools. In this paper, a cascaded lattice Boltzmann (CLB) method for convection heat transfer in porous media at the representative elementary volume (REV) scale is presented. In the CLB method, the flow field is solved by an isothermal CLB model with the D2Q9 lattice based on the generalized non-Darcy mo…
We report a numerical study of Rayleigh--Bénard convection through random porous media using pore-scale modelling, focusing on the Lagrangian dynamics of fluid particles and heat transfer for varied porosities $ϕ$. Due to the interaction between the porous medium and the coherent flow structures, the flow is found to be highly heterogeneous, consisting of convection channels with strong flow strength and stagnant regions with low velocities. The modifications of flow field due to porous structure have a significant influence on the dynamics of fluid particles. Evaluation of the particle displa…
We perform a numerical study of the heat transfer and flow structure of Rayleigh-Bénard (RB) convection in (in most cases regular) porous media, which are comprised of circular, solid obstacles located on a square lattice. This study is focused on the role of porosity $ϕ$ in the flow properties during the transition process from the traditional RB convection with $ϕ=1$ (so no obstacles included) to Darcy-type porous-media convection with $ϕ$ approaching 0. Simulations are carried out in a cell with unity aspect ratio, for the Rayleigh number $Ra$ from $10^5$ to $10^{10}$ and varying porosities…
The paper presents a theoretical study using the Karman-Pohlhausen method for describing the transient heat exchange between the boundary-layer free convection and a vertical flat plate embedded in a porous medium. The unsteady behavior is developed after the generation of an impulsive heat flux step at the right-hand side of the plate. Two cases are considered according to whether the plate has a finite thickness or no thickness. The time and space evolution of the interface temperature is evidenced.
In the above paper the author treats the boundary layer flow along a vertical flat plate, immersed in a Darcy Brinkman Forchheimer porous medium. The porosity and the permeability of the porous medium are variable across the boundary layer. In addition a magnetic field with constant strength is applied normal to the plate. The fluid temperature at the plate is constant and different from that of the ambient fluid. This temperature difference creates a buoyancy force and the flow is characterized as mixed convection. The partial differential equations of the boundary layer flow are transformed …
In this paper, a double multiple-relaxation-time lattice Boltzmann model is developed for simulating transient solid-liquid phase change problems in porous media at the representative elementary volume scale. The model uses two different multiple-relaxation-time lattice Boltzmann equations, one for the flow field and the other for the temperature field with nonlinear latent heat source term. The model is based on the generalized non-Darcy formulation, and the solid-liquid phase change interface is traced through the liquid fraction which is determined by the enthalpy method. The model is valid…
We perform linear and nonlinear stability analysis for thermal convection in a fluid overlying a saturated porous medium. We use a coupled system, with the Navier-Stokes equations and Darcy's equation governing the free-flow and the porous regions respectively. Incorporating a dynamic pressure term in the Lions interface condition (which specifies the normal force balance across the fluid-medium interface) permits an energy bound on the typically uncooperative nonlinear advection term, enabling new nonlinear stability results. Within certain regimes, the nonlinear stability thresholds agree cl…
This investigation deals with the analysis of stagnation point heat transfer and corresponding flow features of hydromagnetic viscous incompressible fluid over a vertical shrinking sheet. The considered sheet is assumed to be permeable and subject to addition of stagnation point to control the generated vorticity in the boundary layer. The sheet is placed on the right side of the fluid saturated porous medium which is having permeability of specified form. Nonlinear convection waves in the flow field are realized due to the envisaged nonlinear relation between density and temperature. The equa…
Natural convection in porous media is a fundamental process for the long-term storage of CO2 in deep saline aquifers. Typically, details of mass transfer in porous media are inferred from the numerical solution of the volume-averaged Darcy-Oberbeck-Boussinesq (DOB) equations, even though these equations do not account for the microscopic properties of a porous medium. According to the DOB equations, natural convection in a porous medium is uniquely determined by the Rayleigh number. However, in contrast with experiments, DOB simulations yield a linear scaling of the Sherwood number with the Ra…
We study the fractionation of two components between a well-mixed gas and a saturated convecting porous layer. Motivated by geological carbon dioxide (CO$_2$) storage we assume that convection is driven only by the dissolved concentration of the first component, while the second acts as a tracer with increased diffusivity. Direct numerical simulations for convection at high Rayleigh numbers reveal that the partitioning of the components, in general, does not follow a Rayleigh fractionation trend, as commonly assumed. Initially, increases in tracer diffusivity also increase its flux, because th…
New insight into the contribution of the microscale vortex evolution towards convection heat transfer in porous media is presented in this paper. The objective is to determine how the microscale vortices influence convection heat transfer in turbulent flow inside porous media. The microscale temperature distribution is analyzed using flow visualization in 2D using streamlines and in 3D using Q structures. The pertinent observations are supplemented with the comparison of surface skin friction and heat transfer using: (1) surface skin friction lines and (2) joint PDF of pressure and skin fricti…
We investigate theoretically the nonlinear state of ideal straight rolls in the Rayleigh-Bénard system of a fluid layer heated from below with a porous medium using a Galerkin method. Applying the Oberbeck-Boussinesq approximation, binary mixtures with positive separation ratio are studied and compared to one-component fluids. Our results for the structural properties of roll convection resemble qualitatively the situation in the Rayleigh--Bénard system without porous medium except for the fact that the streamlines of binary mixtures are deformed in the so-called Soret regime. The deformation …
We numerically examine solutal convection in porous media, driven by the dissolution of carbon dioxide (CO2) into water---an effective mechanism for CO2 storage in saline aquifers. Dissolution is associated with slow diffusion of free-phase CO2 into the underlying aqueous phase followed by density-driven convective mixing of CO2 throughout the water-saturated layer. We study the fluid dynamics of CO2 convection in the single aqueous-phase region. A comparison is made between two different boundary conditions in the top of the formation: (i) a constant, maximum aqueous-phase concentration of CO…
Gravity-driven convection of fluid at parameters near its thermodynamic critical point inside a porous layer heated from below (Rayleigh-Darcy convection) is studied. The fluid having the temperature slightly above the critical one is one-component. The hydrodynamic model describing a high compressible fluid phase at variable physical properties inside a solid matrix at a uniform porosity is analyzed. A near-critical fluid is assumed to be the van der Waals gas. In the limit of small variations in the density and thermodynamic coefficients where the Oberbeck-Boussinesq approximation is applica…
Fully developed forced convective flow in a channel filled with porous material bounded by two impermeable walls subject to constant heat flux is considered. We consider Brinkman-Forchhimer equation to govern the flow inside the porous medium which accounts for the presence of inertial term. We assume that the porous medium is anisotropic in nature and permeability is varying along all the directions, correspondingly, permeability will be a matrix which appear as a positive semi-definite matrix in the momentum equation. The anisotropic nature of the porous medium is characterized by anisotropi…
In this paper, global sensitivity analysis (GSA) and uncertainty quantification (UQ) have been applied to the problem of natural convection (NC) in a porous square cavity. This problem is widely used to provide physical insights into the processes of fluid flow and heat transfer in porous media. It introduces however several parameters whose values are usually uncertain. We herein explore the effect of the imperfect knowledge of the system parameters and their variability on the model quantities of interest (QoIs) characterizing the NC mechanisms. To this end, we use GSA in conjunction with th…
Direct numerical simulations (DNS) indicate that at large values of the Rayleigh number ($Ra$) convection in porous media self-organizes into narrowly-spaced columnar flows, with more complex spatiotemporal features being confined to boundary layers near the top and bottom walls. In this investigation of high-$Ra$ porous media convection in a minimal flow unit, two reduced modeling strategies are proposed that exploit these specific flow characteristics. Both approaches utilize the idea of decomposition since the flow exhibits different dynamics in different regions of the domain: small-scale …
Double-diffusive convection in porous media is a common phenomenon in nature, and has received considerable attention in a wide variety of engineering applications. In this paper, a multiple-relaxation-time (MRT) lattice Boltzmann (LB) model is developed for simulating double-diffusive convection in porous media at the representative elementary volume scale. The MRT-LB model is constructed in the framework of the triple-distribution-function approach: the velocity field, the temperature and concentration fields are solved separately by three different MRT-LB equations. The present model has tw…
A bidisperse porous medium is one with two porosity scales. There are the usual pores known as macro pores but also cracks or fissures in the skeleton which give rise to micro pores. In this article we develop and analyse a model for thermal convection where a layer of viscous incompressible fluid overlies a layer of bidisperse porous medium. Care has to be taken with the boundary conditions at the interface of the fluid and the porous material and this aspect is investigated. The situation is one in a layer which is heated from below and under appropriate conditions bimodal neutral curves are…
Recent planetary data and geophysical modelling suggest that hydrothermal activity is ongoing under the ice crust of Enceladus, one of Saturn's moons. According to these models, hydrothermal flow in the porous, rocky core of the satellite is driven by tidal deformation that induces dissipation and volumetric internal heating. Despite the effort in the modelling of Enceladus' interior, systematic understanding---and even basic scaling laws---of internally-heated porous convection and hydrothermal activity are still lacking. In this article, using an idealised model of an internally-heated porou…
The study investigates the problem of magnetohydrodynamic (MHD) free convection over a non-isothermal axisymmetric body under the action of transverse magnetic field. The body is embedded in a porous medium saturated with electrically conducting non-Newtonian power law fluid. In order to obtain similarity solution, it is assumed that the viscosity of the fluid decays exponentially with temperature. The qualitative results are illustrated for a vertical flat plate, horizontal cylinder and sphere.
We investigate the effect of dispersion on convection in porous media by performing direct numerical simulations (DNS) in a two-dimensional Rayleigh-Darcy domain. Scaling analysis of the governing equations shows that the dynamics of this system are not only controlled by the classical Rayleigh-Darcy number based on molecular diffusion, $Ra_m$, and the domain aspect ratio, but also controlled by two other dimensionless parameters: the dispersive Rayleigh number $Ra_d = H/α_t$ and the dispersivity ratio $r = α_l/α_t$, where $H$ is the domain height, $α_t$ and $α_l$ are the transverse and longit…
Deep saline aquifers used for CO$_2$ sequestration are commonly made of sedimentary formations consisting of several layers of distinguishable permeability. In this work, the effect of a non-monotonic, vertically varying permeability profile on the onset of convective instability is studied theoretically using linear stability analyses. The onset time depends on the interaction between the permeability profile and the location of the concentration perturbation peak beyond which the concentration of CO$_2$ decays. A thin low-permeability layer can either accelerate or delay the onset time of th…
Motivated by geological carbon dioxide (CO$_2$) storage, many recent studies have investigated the fluid dynamics of solutal convection in porous media. Here we study the convective dissolution of CO$_2$ in a closed system, where the pressure in the gas declines as convection proceeds. This introduces a negative feedback that reduces the convective dissolution rate even before the brine becomes saturated. We analyse the case of an ideal gas with a solubility given by Henry's law, in the limits of very low and very high Rayleigh numbers. The equilibrium state in this system is determined by the…
In this paper, a multiple-relaxation-time (MRT) lattice Boltzmann (LB) model is proposed for convection heat transfer in porous media under local thermal non-equilibrium (LTNE) condition. The model is constructed within the framework of the three-distribution-function approach: two temperature-based MRT-LB equations are proposed for the temperature fields of fluid and solid phases in addition to the MRT-LB equation of a density distribution function for the velocity field described by the generalized non-Darcy model. The thermal non-equilibrium effects are incorporated into the model by adding…
We study the mixing in the presence of convective flow in a porous medium. Convection is characterized by the formation of vortices and stagnation points, where the fluid interface is stretched and compressed enhancing mixing. We analyze the behavior of the mixing dynamics in different scenarios using an interface deformation model. We show that the scalar dissipation rate, which is related to the dissolution fluxes, is controlled by interfacial processes, specifically the equilibrium between interface compression and diffusion, which depends on the flow field configuration. We consider differ…
In this paper we propose a continuous data assimilation (downscaling) algorithm for the Bénard convection in porous media using only coarse mesh measurements of the temperature. In this algorithm, we incorporate the observables as a feedback (nudging) term in the evolution equation of the temperature. We show that under an appropriate choice of the nudging parameter and the size of the mesh, and under the assumption that the observed data is error free, the solution of the proposed algorithm converges at an exponential rate, asymptotically in time, to the unique exact unknown reference solutio…
Perfectly incompressible materials do not exist in nature but are a useful approximation of several media which can be deformed in non-isothermal processes but undergo very small volume variation. In this paper the linear analysis of the Darcy-Bénard problem is performed in the class of extended-quasi-thermal-incompressible fluids, introducing a factor $β$ which describes the compressibility of the fluid and plays an essential role in the instability results. In particular, in the Oberbeck-Boussinesq approximation, a more realistic constitutive equation for the fluid density is employed in ord…
A numerical solution is presented for the natural convection from inclined wall plumes which arise from a line thermal source imbedded at the leading edge of an adiabatic plate with arbitrary tilt angle and embedded in a fluid-saturated porous medium. An appropriate transformation of the governing boundary-layer equations is proposed and a very efficient novel numerical solution is proposed to obtain rigorous numerical solutions of the transformed nonsimilar equations over a wide range of tilt angle from the vertical to the horizontal.
We present the first experiments of dissolution-driven convection of carbon dioxide (CO$_2$) in a confined brine-saturated porous medium at high pressures. We designed a novel Hele-Shaw cell that allows for both visual and quantitative analyses, and address the effects of free-phase CO$_2$ and brine composition on convective dissolution. The visual examination of the gas volume combined with the measurement of pressure, which both evolve with dissolution, enable us to yield insights into the dynamics of convection in conditions that more closely reflect the geologic conditions. We find and ana…
We test the ability of a general low-dimensional model for turbulence to predict geometry-dependent dynamics of large-scale coherent structures, such as convection rolls. The model consists of stochastic ordinary differential equations, which are derived as a function of boundary geometry from the Navier-Stokes equations (Brown and Ahlers 2008). We test the model using Rayleigh-Bénard convection experiments in a cubic container. The model predicts a new mode in which the alignment of a convection roll switches between diagonals. We observe this mode with a measured switching rate within 30% of…
We discuss two aspects of turbulent Rayleigh-Bénard convection (RBC) on the basis of high-resolution direct numerical simulations in a unique setting; a closed cylindrical cell of aspect ratio of one. First, we present a comprehensive comparison of statistical quantities such as energy dissipation rates and boundary layer thickness scales. Data are used from three simulation run series at Prandtl numbers $Pr$ that cover two orders of magnitude. In contrast to most previous studies in RBC the focus of the present work is on convective turbulence at very low Prandtl numbers including $Pr=0.021$ …
In this work we examine the dispersion of conservative tracers (bromide and fluorescein) in an experimentally-constructed three-dimensional dual-porosity porous medium. The medium is highly heterogeneous ($σ_Y^2=5.7$), and consists of spherical, low-hydraulic-conductivity inclusions embedded in a high-hydraulic-conductivity matrix. The bi-modal medium was saturated with tracers, and then flushed with tracer-free fluid while the effluent breakthrough curves were measured. The focus for this work is to examine a hierarchy of four models (in the absence of adjustable parameters) with decreasing c…
Geological storage of CO$_2$ in deep saline aquifers is a promising measure to mitigate global warming by reducing the concentration of this greenhouse gas in the atmosphere. When CO$_2$ is injected in the geological formation, it dissolves partially in the interstitial brine, thus rendering it denser than the CO$_2$-devoid brine below, which creates a convective instability. The resulting convection accelerates the rate of CO$_2$ perennial trapping by dissolution in the brine. The instability and resulting convection have been intensively discussed by numerical and theoretical approaches at t…
Motivated by the mushy zones of sea ice, volcanoes, and icy moons of the outer solar system, we perform a theoretical and numerical study of boundary-layer convection along a vertical heated wall in a bounded ideal mushy region. The mush is comprised of a porous and reactive binary alloy with a mixture of saline liquid in a solid matrix, and is studied in the near-eutectic approximation. Here we demonstrate the existence of four regions and study their behavior asymptotically. Starting from the bottom of the wall, the four regions are (i) an isotropic corner region; (ii) a buoyancy dominated v…
Porous materials are used in many fields, including energy industry, agriculture, medical industry, etc. The generation of digital porous media facilitates the fabrication of real porous media and the analysis of their properties. The past random digital porous media generation methods are unable to generate a porous medium with a specific permeability. A new method is proposed in the present study, which can generate the random packed isotropic porous media with specific porosity and permeability. Firstly, the process of generating the random packed isotropic porous media is detailed. Secondl…
Convolutional neural networks (CNN) are utilized to encode the relation between initial configurations of obstacles and three fundamental quantities in porous media: porosity ($φ$), permeability $k$, and tortuosity ($T$). The two-dimensional systems with obstacles are considered. The fluid flow through a porous medium is simulated with the lattice Boltzmann method. It is demonstrated that the CNNs are able to predict the porosity, permeability, and tortuosity with good accuracy. With the usage of the CNN models, the relation between $T$ and $φ$ has been reproduced and compared with the empiric…
