Pd nanoalloys show great potential as hysteresis-free, reliable hydrogen sensors. Here, a multi-scale modeling approach is employed to determine optimal conditions for optical hydrogen sensing using the Pd-Au-H system. Changes in hydrogen pressure translate to changes in hydrogen content and eventually the optical spectrum. At the single particle level, the shift of the plasmon peak position with hydrogen concentration (i.e., the "optical" sensitivity) is approximately constant at 180 nm/c_H for nanodisk diameters >~ 100 nm. For smaller particles, the optical sensitivity is negative and increases with decreasing diameter, due to the emergence of a second peak originating from coupling between a localized surface plasmon and interband transitions. In addition to tracking peak position, the onset of extinction as well as extinction at fixed wavelengths is considered. We carefully compare the simulation results with experimental data and assess the potential sources for discrepancies. Invariably, the results suggest that there is an upper bound for the optical sensitivity that cannot be overcome by engineering composition and/or geometry. While the alloy composition has a limited impact on optical sensitivity, it can strongly affect H uptake and consequently the "thermodynamic" sensitivity and the detection limit. Here, it is shown how the latter can be improved by compositional engineering and even substantially enhanced via the formation of an ordered phase that can be synthesized at higher hydrogen partial pressures.
Mode- and Space- Resolved Thermal Transport of Alloy Nanostructures
纳米结构的半导体合金由于声子的散射而获得超低的热导率,具有宽范围的平均自由程(MFP)。在这些材料中,长MFP声子分散在纳米尺度的边界,而短MFP高频声子被合金化引入的无序点缺陷所阻碍。虽然这一趋势已被简化的分析和数值方法所证实,但从头算空间分辨方法仍然难以捉摸。为了填补这一空白,我们计算的导热系数降低多孔合金通过求解模式分辨玻尔兹曼输运方程的声子使用有限体积法。我们分析了不同的合金,长度尺度,浓度和温度,在整个配置空间的热导率获得了非常大的减少。例如,对于孔隙率为25%的Al $_{0.8}$ In $_{0.2}$ As,发现约97%的减少。此外,我们采用这些模拟来验证我们最近引入的“弹道修正模型”(BBM),这是一种使用块体合金的特征MFP和材料的长度尺度来估计有效热导率的方法。然后,该模型被用来提供设计合金基纳米结构的指导原则。值得注意的是,它阐明了多孔合金,如Si $_{x}$ Ge $_{1-x}$如何获得比多孔Si或Ge更大的热导率降低,同时也解释了为什么我们不应该期望在合金中有类似的行为,如Al $_{x}$ In $_{1-x}$ As。通过考虑不同尺度下散射的协同作用,我们为超低热导率材料的设计提供了一条途径。
An Environment-dependent Semi-Empirical Tight Binding Model Suitable for Electron Transport in Bulk Metals, Metal Alloys, Metallic Interfaces and Metallic Nanostructures I - Model and Validation
An Environment-dependent Semi-Empirical Tight Binding Model Suitable for Electron Transport in Bulk Metals, Metal Alloys, Metallic Interfaces and Metallic Nanostructures II - Effect of Confinement and Homogeneous Strain on Cu Conductance
Tunability of martensitic behavior through coherent nanoprecipitates and other nanostructures
分子动力学模拟结果表明,共格析出相对Ni $_{63}$ Al $_{37}$合金的马氏体相变有显著影响。由非马氏体Ni $_{50}$ Al $_{50}$组成的沉淀物改变了支配相变的自由能景观,并导致热滞后的显著降低,而相变应变的代价非常小,并且改变了相变温度。重要的是,本文表明,自由能景观工程是可能的纳米结构可能通过标准的冶金加工路线。探讨了纳米沉淀体系中原子级成核和转化机制,并与外延纳米层压材料和纳米线进行了比较。模拟揭示了三种不同的制度的转变机制和马氏体纳米结构的非马氏体相的体积分数的函数。自由能景观工程是普遍适用的,并可能有助于设计新的记忆合金与新的性能,如在室温下操作的轻质合金。
Interplay of Strain Relaxation and Chemically Induced Diffusion Barriers: Nanostructure Formation in 2D Alloys
我们研究了在亚单层异质外延过程中,由本体不混溶的吸附物组成的交替条纹纳米结构的形成。我们评估了文献中考虑的两种机制的影响:(i)交替排列的吸附物物种的应变弛豫,及(ii)由于化学诱导的扩散障碍的动力学偏析。一个模型三元系统的两个吸附物与相反的失配相对于基板,和对称的结合研究的非晶格以及晶格动力学蒙特卡罗模拟。我们发现,机制(i)或(ii)都不能单独解释已知的实验观察。相反,需要两者的结合。我们提出了一个非晶格模型,它允许定性再现的条纹图案以及岛的衍生物与最近的实验观察CoAg/Ru(0001)[R。Q. Hwang,Phys. Rev. Lett. 76,4757(1996)]。的条纹宽度和岛的分歧程度上的错配和两种吸附质类型之间的相互作用强度的定量依赖关系。试图捕捉一个简化的格子气模型的基本特征表明,一个详细的非本地效应的纳入是必要的。
Hydrogen uptake and hydride formation in Al$_x$CoCrFeNi high-entropy alloys: First-principles, universal-potential, and experimental study
Ruhr-Universität Bochum(波鸿鲁尔大学);Max-Planck-Institut for Sustainable Materials(马克斯·普朗克可持续材料研究所);University of Stuttgart(斯图加特大学);Deutsches Elektronen-Synchrotron DESY(德国电子同步辐射中心);Goethe University Frankfurt(法兰克福歌德大学);Federal Institute for Materials Research and Testing (BAM)(联邦材料研究与测试研究所)
Insights into hydrogen-induced vacancy stability and creep in chemically complex alloys
Ames National Laboratory, US Department of Energy, Iowa State University(艾姆斯国家实验室,美国能源部,爱荷华州立大学);Los Alamos National Laboratory(洛斯阿拉莫斯国家实验室);Department of Materials Science & Engineering, Iowa State University(爱荷华州立大学材料科学与工程系)
Machine learning via artificial neural networks coupled with density functional theory and experiments for thermodynamic optimization of high-entropy alloys for hydrogen storage at room temperature
WPI, International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University(九州大学);Department of Automotive Science, Graduate School of Integrated Frontier Sciences, Kyushu University(九州大学);Institute for Materials Science, University of Stuttgart(斯图加特大学)
Understanding early stages of low-temperature hydrogen-driven direct co-reduction of Fe-Ni mixed oxide thin films at the near atomic scale
Chair for Materials Discovery and Interfaces, Institute for Materials, Ruhr-Universität Bochum(鲁尔大学材料研究所材料发现与界面讲席);Max Planck Institute for Sustainable Materials(马克斯·普朗克可持续材料研究所);Center for Interface Dominated High Performance Materials (ZGH), Ruhr-Universität Bochum(鲁尔大学界面主导高性能材料中心)
Effect of Niobium Doping on the Crystal Structure and Hydrogen Sorption Properties of TiFe: Combined Synchrotron X-ray Diffraction and Extended X-ray Absorption Fine Structure Study
University of Stavanger(斯塔万格大学);Institute for Energy Technology(能源技术研究所)
Low temperature synthesis of heterostructures of transition metal dichalcogenide alloys (WxMo1-xS2) and graphene with superior catalytic performance for hydrogen evolution
通过湿化学路线,然后在低温(300 $^\circ$ C)下热处理,获得通过交替石墨烯和过渡金属二硫属化物(TMD)合金形成的垂直异质结构的大面积($\sim$ cm $^2$)膜。特别地,我们合成了堆叠的石墨烯和用作析氢催化剂的W $_x$ Mo $_{1-x}$ S $_2$合金相。当异质结构合金在300 $^o$ ℃退火时,我们观察到38.7 mV dec $^{-1}$和96 mV起始电位(在10 mA cm $^{-2}$的电流密度下)的塔菲尔斜率。这些结果表明,由石墨烯和W $_{0.4}$ Mo $_{0.6}$ S $_2$合金形成的异质结构比WS $_2$和MoS $_2$有效至少两倍,并且优于任何其他报道的TMD系统。这种策略提供了一种廉价且低温的合成替代方案,能够在析氢反应(HER)中取代Pt。此外,合金的催化活性随时间稳定,即催化活性即使在1000次循环后也不经历显著变化。使用密度泛函理论计算,我们发现,这种增强的析氢在W $_x$ Mo $_{1-x}$ S $_2$合金中主要是由于较低的能量势垒产生的d-轨道的过渡金属和H $_2$的s-轨道的有利的重叠,与最低的能量势垒发生W $_{0.4}$ Mo $_{0.6}$ S $_2$合金。因此,除了先前报道的产生点缺陷、空位和边缘的策略之外,现在还可以通过金属合金化进一步改善“惰性”TMD基面的性能。在相…