A 20 Gbps PAM4 Data Transmitter ASIC for Particle Physics Experiments
L. Zhang, E. M. Cruda, C-P. Chao, S-W. Chen, B. Deng, R. Francisco, D. Gong, D. Guo, S. Hou, G. Huang, X. Huang, S. Kulis, C-Y. Li, C. Liu, E. R. Liu, T. Liu, P… 展开作者
L. Zhang, E. M. Cruda, C-P. Chao, S-W. Chen, B. Deng, R. Francisco, D. Gong, D. Guo, S. Hou, G. Huang, X. Huang, S. Kulis, C-Y. Li, C. Liu, E. R. Liu, T. Liu, P. Moreira, J. Prinzie, H. Sun, Q. Sun, X. Sun, G. Wong, D. Yang, J. Ye, W. Zhang
We present the design and test results of a novel data transmitter ASIC operating up to 20.48 Gbps with 4-level Pulse-Amplitude-Modulation (PAM4) for particle physics experiments. This ASIC, named GBS20, is fabricated in a 65 nm CMOS technology. Two serializers share a 5.12 GHz Phase Locked Loop (PLL) clock. The outputs from the serializers are combined into a PAM4 signal that directly drives a Vertical-Cavity-Surface-Emitting-Laser (VCSEL). The input data channels, each at 1.28 Gbps, are scrambled with an internal 27-1 Pseudo-Random Binary Sequence (PRBS), which also serves as a frame aligner. GBS20 is tested to work at 10.24 and 20.48 Gbps with a VCSEL-based Transmitter-Optical-Subassembly (TOSA). The power consumption of GBS20 is below 238 mW and reduced to 164 mW in the low-power mode.
A 40 Gbps Optical Transceiver for Particle Physics Experiments
我们提出了一个四通道光收发模块(QTRx)的设计和测试结果可能为未来的粒子物理实验。QTRx的发射器均为10 Gbps,基于四通道VCSEL二极管阵列驱动器(QLDD)和1 x 4 VCSEL阵列。QTRx的接收器每通道数据速率为2.56 Gbps或10 Gbps,基于四通道跨阻抗和限幅放大器(QTIA)和1 x 4 GaAs或InGaAs光电二极管阵列。QTRx尺寸为20 mm x 10 mm x 5 mm,可耦合到MT光纤连接器。测试结果表明,QTRx达到了设计目标,在10 Gbps和2.56 Gbps的接收器通道与片上电荷泵的功耗分别为124 mW和120 mW的发射器通道。QTIA的灵敏度在2.56 Gbps时为-17 dBm,在10 Gbps时为-8 dBm。正在设计进一步改进的金手指接口和更紧凑的光学镜头。
The Design and Testing of the Address in Real Time Data Driver Card for the Micromegas Detector of the ATLAS New Small Wheel Upgrade
实时数据驱动卡地址(ADDC)设计用于传输ATLAS New Small Wheel(NSW)升级的Micromegas探测器中的触发数据。ART信号由名为VMM芯片的前端ASIC生成,以指示第一个高于阈值事件的地址。一个定制的ASIC(ART ASIC)被设计用于接收来自VMM芯片的ART信号并进行命中选择处理。来自ART ASIC的处理数据将通过GBTx串行器、VTTx光发射器模块和光纤链路传输出新南威尔士州检测器。ART信号对于ATLAS实验触发器的选择至关重要,因此ADDC的功能和稳定性非常重要。为了确保ADDC的广泛测试,开发了基于FMC的测试平台和专用固件/软件。该测试平台与商用Xilinx VC 707 FPGA开发套件配合使用,即使没有NSW的其他电子设备,也可以测试ADDC的所有功能和长期稳定性。本文将介绍ADDC和FMC测试平台的设计、测试过程和结果。