Measurements of cosmogenic particles at various locations and altitudes are becoming increasingly important in view of worldwide interests in rare signals for search of new physics. In this work, we report measurement of muon zenith angle distributions and integrated flux using a portable setup of four one-meter long liquid scintillator bars. Each scintillator bar is read out from both sides via photomultiplier tubes followed by an 8-channel Digitizer. We exploit energy deposition and excellent timing of scintillators to construct two dimensional tracks and hence angles of charged particles. We use liquid scintillators since they have an added advantage of pulse shape discrimination (PSD) which can be used for detecting muon induced particles. The energy deposition, time window of event and PSD cuts are used to reduce the random as well as correlated backgrounds. In addition, we propose three track quality parameters which are applied to obtain a clean muon spectrum. The zenith angle measurement is performed upto $60^\circ$. With our improved analysis, we demonstrate that a setup of 3 bars can also be used for quicker and precise measurements. The vertical muon flux measured is $66.70 \pm 0.36 \pm 1.50$ $/m^2/sr/s$ with $n=2.10 \pm 0.05 \pm 0.25 $ in $\cos^n θ$ at the location of Mumbai, India ($19^{\circ}$N, $72.9^{\circ}$E) at Sea level with a muon momentum above $255$ MeV/$c$. The muon flux has dependence on various factors, the most prominents are latitudes, altitudes and momentum cut of muon so that portable setup like this can be a boon for such measurements at various locations.
We report measurement of reactor based electron anti-neutrinos from a prototype array of plastic scintillator bars ( mini-ISMRAN ) located inside Dhruva research reactor hall, BARC. The detector setup took data for 128 days for reactor on (RON) and 51 days for reactor off (ROFF) condition. A detailed analysis procedure is developed to select the anti-neutrino candidate events based on the energy deposition, number of bars hit as well as topological event selection criteria in position and time. Each of these selection criteria are compared with Monte Carlo based simulations and further an embe…
In this study, the conceptual design and physics simulations of a near-field Water-based Liquid Scintillator (WbLS) detector placed 100 meters from the Akkuyu Nuclear Power Plant (ANPP), currently under construction and aiming at being Turkey's first nuclear power plant, is presented. The ANPP is an excellent opportunity for neutrino studies and the development of an R&D program for neutrino detectors in Turkey. The Reactor Neutrino Experiments of Turkey (RNET) program includes a compact and portable detector with a 2.5-ton volume of WbLS and a ~30% photo-coverage, and the program is planned t…
We report results of fast neutron response in plastic scintillator (PS) bars from deuterium-deuterium (D-D) and deuterium-tritium (D-T) reactions using Purnima Neutron Generator Facility, BARC, Mumbai. These measurements are useful in context of Indian Scintillator Matrix for Reactor Anti-Neutrino (ISMRAN) detection, an array of 10x10 PS bars, used to measure reactor anti-neutrinos through inverse beta decay (IBD) signal. ISMRAN detector, an above-ground experiment close to the reactor core (~13m), deals with an active fast neutron background inside the reactor hall. A good understanding of fa…
We have studied the possibility of using Geiger mode multi-pixel photodiodes to read out long scintillator bars with a single wavelength-shifting fiber embedded along the bar. This detector configuration can be used in large volume detectors in future long baseline neutrino oscillation experiments. Prototype bars of 0.7 cm thickness and different widths have been produced and tested using two types of multi-pixel photodiodes: MRS APD (CPTA, Moscow) and MPPC (Hamamatsu). A minimum light yield of 7.2 p.e./MeV was obtained for a 4 cm wide bar.
This study presents a new concept of segmented antineutrino detector based on hexagonal plastic scintillator bars for detecting antineutrinos from a nuclear reactor core. The choice of hexagonal scintillator bars is original and provides compactness. The proposed detector detects antineutrinos via inverse beta decay (IBD) with the prompt-delayed double coincidence. Owing to its segmented structure, the background, which satisfies the delayed coincidence condition can be eliminated by applying proper event selection cuts. In this manner, the main focus is to determine proper selection criteria …
We present a detailed study on detector response to different radioactive sources and the measurements of non-reactor environmental backgrounds with the Indian Scintillator Matrix for Reactor Anti-Neutrinos (ISMRAN) detector setup consisting of 9$\times$10 Plastic Scintillator Bars (PSBs) array at BARC, Mumbai. These measurements are useful in the context of the ISMRAN detector setup, which will be used to detect the reactor anti-neutrinos (${\bar{\ensuremathν}}_{e}$) and measure its energy spectra, through the inverse beta decay (IBD) process. A GEANT4 based Monte Carlo (MC) simulation is use…
We report on the position, timing, and energy resolution of a range of plastic scintillator bars and reflector treatments using dual-ended silicon photomultiplier readout. These measurements are motivated by the upcoming construction of an optically segmented single-volume neutron scatter camera, in which neutron elastic scattering off of hydrogen is used to kinematically reconstruct the source direction and energy of an incoming neutron. For this application, interaction position resolutions of about 10 mm and timing resolutions of about 1 ns are necessary to achieve the desired efficiency fo…
We have developed a compact Compton gamma-ray imager with a large field of view and a low channel-count that is capable of quickly localizing gamma-ray sources in the few hundred keV - several MeV range. The two detector planes (scatter and absorber) employ bars of NaI(Tl) read out by photomultiplier tubes (PMTs) located at each end. The long-range imaging performance has been tested from 392 keV to 1274 keV. An angular resolution measure of 2.72 +/- 0.06 degrees and an efficiency of (1.79 +/- 0.04) x 10^(-3) at 662 keV is obtained. A Cs-137 (662 keV) source equivalent to a 10 mCi source 40 m …
The results obtained in laboratory tests, using scintillator bars read by silicon photomultipliers are reported. The present approach is the first step for designing a precision tracking system to be placed inside a free magnetized volume for the charge identification of low energy crossing particles. The devised system is demonstrated able to provide a spatial resolution better than 2 mm.
We present in this work the calibration procedure and a performance study of long scintillator bars used for the time-of-flight (TOF) measurement in the HADES experiment. The digital front-end electronics installed at the TOF detector required to develop novel calibration methods. The exceptional performance of the spectrometer for particle identification and pointing accuracy allows one to determine in great detail the response of scintillators to minimum ionizing particles. A substantial position sensitivity of the calibration parameters has been found, in particular for the signal time walk…
This article describes the design, assembly and characterization of a portable cosmic ray detector, developed by the INSULAB group and suitable for teaching activities aimed at high school students. It consists of a compact aluminum suitcase containing three plastic scintillator modules coupled to photomultipliers, readout by a custom compact electronics chain and powered by a power bank. The modules operate in coincidence and the system records the arrival time of each particle and the time over threshold of the signal of each scintillator module. The data are acquired and processed by a Rasp…
Design and performance of a large-area scintillator-based chamber for the MID subsystem of ALICE 3
Instituto de Física, Universidad Nacional Autónoma de México（墨西哥国立自治大学物理研究所）；Instituto Tecnológico de Culiacán, Tecnológico Nacional de México（库利亚坎理工学院，墨西哥科技学院）；Chicago State University（芝加哥州立大学）；Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México（墨西哥国立自治大学核科学研究所）；Centro de Investigación y Estudios Avanzados（高级研究与创新中心）；Universidad Autónoma de Sinaloa（锡那罗亚自治大学）；Czech Technical University in Prague（布拉格捷克理工大学）；Facultad de Ciencias Físico Matemáticas, Benemérita Universidad Autónoma de Puebla（普埃布拉自治大学物理数学科学学院）
Plastic scintillator detectors have been extensively used in particle physics experiments for decades. A large-scale detector is typically arranged as an array of staggered long bars which provide a fast trigger signal and/or particle identification via time-of-flight measurements. Scintillation light is collected by photosensors coupled to both ends of every bar. In this article, we present our study on a direct replacement of commonly used vacuum photomultiplier tubes (PMTs) by arrays of large-area silicon photomultipliers (SiPMs). An SiPM array which is directly coupled to the scintillator …
We have re-purposed portable plastic scintillator muon detectors, designed by the CosmicWatch project, for the measurement of electrons emitted by the decay of radioactive sources. For the latter purpose we have first calibrated the detectors using the local atmospheric muon flux, performing angular distribution and attenuation measurements. In addition, we have simulated the detector using Geant4 in a detailed fashion for a cross-check and better understanding of the device. Then, we have developed a method to evaluate the activity of $β$-sources and to discriminate different $β$-sources by l…
We report the measurement of the non-reactor environmental backgrounds and the detector response with the Indian Scintillator Matrix for Reactor Anti-Neutrinos (ISMRAN), which is $\sim$1 ton detector setup by volume, consisting of 10$\times$9 (10 rows and 9 columns) Plastic Scintillator Bars (PSBs) array at BARC, Mumbai, India. ISMRAN is an above-ground anti-neutrino ($\mathrm{\overlineν_{e}}$) experiment at very short baseline located at Dhruva research reactor facility. It is enclosed by a shielding made of 10 cm thick lead and 10 cm thick borated polyethylene to minimize the backgrounds and…
Polyurethane Scintillators for High-Energy Physics Detectors: Optimization, Scale-up, and Radiation Response
Universidad Autónoma de Sinaloa（西那罗亚自治大学）；Czech Technical University（捷克理工大学）；Institute of Physics of the Czech Academy of Sciences（捷克科学院物理研究所）；Centro de Investigación y Estudios Avanzados（高级研究与创新中心）；European Organization for Nuclear Research (CERN)（欧洲核子研究组织（CERN））
Precise measurement of neutrino-nucleus interactions with an accelerator neutrino beam is highly important for current and future neutrino oscillation experiments. To measure muon-neutrino charged-current interactions with nuclear-emulsion-based hybrid detector, muon track matching among the detectors are essential. We describe the design and performance of a newly developed scintillation tracker for the muon track matching in the neutrino-nucleus interaction measurement with nuclear emulsion detectors. The muon tracks are reconstructed using the scintillation tracker and another detector call…
In this paper we present a complete and detailed computational model of the response of the hybrid Muon Telescope (MuTe), designed to perform muography volcanic studies. This instrument combines two particle detection techniques: first, a muon hodoscope based on two panels of plastic scintillator bars; and a Water Cherenkov detector located behind the rear scintillator panel acting both as a coincidence and a discriminating detector. The simulation model includes: materials, geometries, dimensions, and the photo-sensitiveness of the detectors. The simulation results, in agreement with the meas…
Muon radiography, also known as muography, is a non-destructive geophysical technique for the study of the internal structure of large objects such as volcanoes. This is possible by constructing an image based on the differential absorption of the directional flux of high-energy atmospheric muons produced during the interaction of cosmic rays with the atmosphere. So this no other source of radiation is required for this technique. Many muon telescopes are being built with crossed scintillator bars and so, the resolution of each panel is essentially given by the total surface of the bar crossin…
The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter in charge of the electron background rejection downstream of the cooling channel at the international Muon Ionization Cooling Experiment. It consists of 2832 plastic scintillator bars segmented in 48 planes in an X-Y arrangement and uses particle range as its main variable to tag muons and discriminate electrons. An array of analyses were conducted to characterize the hardware of the EMR and determine whether the detector performs to specifications. The clear fibres coming from the bars were shown to transmit the desired amo…
In this article, the results from a series of muon flux measurements conducted at the Kimballton Underground Research Facility (KURF), Virginia, United States, are presented. The detector employed for these investigations, is made of plastic scintillator bars readout by wavelength shifting fibers and multianode photomultiplier tubes. Data was taken at several locations inside KURF, spanning rock overburden values from ~ 200 to 1450 m.w.e. From the extracted muon rates an empirical formula was devised, that estimates the muon flux inside the mine as a function of the overburden. The results are…
The Backward Angle Neutron Detector (BAND) of CLAS12 detects neutrons emitted at backward angles of $155^\circ$ to $175^\circ$, with momenta between $200$ and $600$ MeV/c. It is positioned 3 meters upstream of the target, consists of $18$ rows and $5$ layers of $7.2$ cm by $7.2$ cm scintillator bars, and read out on both ends by PMTs to measure time and energy deposition in the scintillator layers. Between the target and BAND there is a 2 cm thick lead wall followed by a 2 cm veto layer to suppress gammas and reject charged particles. This paper discusses the component-selection tests and the …
In the current paper, we analyzed the variation of cosmic radiation flux with elevation, time of the year and ambient temperature with the help of a portable cosmic muon detector, the construction of which was completed by a team from Southern Arkansas University (SAU) at Lawrence Berkeley National Laboratory (LBNL). Cosmic muons and gamma rays traverse two synchronized scintillators connected to two photomultiplier tubes (PMT) via light guides, and generate electronic pulses which we counted using a Data Acquisition Board (DAQ). Because muons are the product of collisions between high-energy …
The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter installed in the beam line of the Muon Ionization Cooling Experiment (MICE). The experiment will demonstrate ionization cooling, an essential technology needed for the realization of a Neutrino Factory and/or a Muon Collider. The EMR is designed to measure the properties of low energy beams composed of muons, electrons and pions, and perform the identification particle-by-particle. The detector consists of 48 orthogonal layers of 59 triangular scintillator bars. The readout is implemented using FPGA custom made electronics a…
