We propose a metric called the bistatic radar detection coverage probability to evaluate the detection performance of a bistatic radar under discrete clutter conditions. Such conditions are commonly encountered in indoor and outdoor environments where passive radars receivers are deployed with opportunistic illuminators. Backscatter and multipath from the radar environment give rise to ghost targets and point clutter responses in the radar signatures resulting in deterioration in the detection performance. In our work, we model the clutter points as a Poisson point process to account for the diversity in their number and spatial distribution. Using stochastic geometry formulations we provide an analytical framework to estimate the probability that the signal to clutter and noise ratio from a target at any particular position in the bistatic radar plane is above a predefined threshold. Using the metric, we derive key radar system perspectives regarding the radar performance under noise and clutter limited conditions; the range at which the bistatic radar framework can be approximated to a monostatic framework; and the optimal radar transmitted power and bandwidth. Our theoretical results are experimentally validated with Monte Carlo simulations.
Tracking with bistatic radar measurements is challenging due to the fact that the measurements are nonlinear functions of the Cartesian state. The converted measurement Kalman filter (CMKF) converts the raw measurement into Cartesian coordinates prior to tracking, which avoids the pitfalls of the extended Kalman filter (EKF). The challenges of CMKF are debiasing the converted measurement and approximating the converted measurement error covariance. Due to no closed form of biases, this letter utilizes the second order Taylor series expansion of the conventional measurement conversion to find t…
Recent advances in digital beam forming for phased arrays in combination with digital signal processing should enable the development of multibeam radar in a bistatic configuration. In the bistatic setting, the pulse travelling outward from the transmitter should be followed or "chased" by the receiver. During transmission, depending on the location of the transmitter, receiver, and pulse, the number of digital beams and their location at the transmitter vary. In this paper, we analyse the geometrically depending number of digital beams and the beam switching rate of the receiver needed for pu…
Cramer-Rao Bound Analysis of Bistatic ISAC Under Partial Symbol Knowledge and Clutter
School of Electrical Engineering and Computer Science (EECS), KTH Royal Institute of Technology（皇家理工学院电气工程学院和计算机科学学院）；Ericsson Research, Stockholm, Sweden（爱立信研究）
Wideband Antenna Deconvolution for Bistatic Millimeter Wave Radar Reflectivity Measurements
Thuringian Center of Innovation in Mobility（图林根创新 mobility 中心）；Institute of Information Technology, Technische Universität Ilmenau（伊尔梅瑙工业大学信息技术研究所）；RF and Microwave Research Group, Technische Universität Ilmenau（伊尔梅瑙工业大学射频与微波研究组）
In this letter, a novel nested PARAFAC algorithm was proposed to improve the 8D parameters estimation performance for the bistatic EMVS-MIMO radar. Firstly, the outer part PARAFAC algorithm was carried out to estimate the receive spatial response matrix and its first way factor matrix. For the estimated first way factor matrix, a theory is given to rearrange its data into an new matrix, which is the mode-1 unfolding matrix of a three-way tensor. Then, the inner part PARAFAC algorithm was used to estimate the transmit steering vector matrix, the transmit spatial response matrix and the receive …
In this paper, the underdetermined 2D-DOD and 2D-DOA estimation for bistatic coprime EMVS-MIMO radar is considered. Firstly, a 5-D tensor model was constructed by using the multi-dimensional space-time characteristics of the received data. Then, an 8-D tensor has been obtained by using the auto-correlation calculation. To obtain the difference coarrays of transmit and receive EMVS, the de-coupling process between the spatial response of EMVS and the steering vector is inevitable. Thus, a new 6-D tensor can be constructed via the tensor permutation and the generalized tensorization of the canon…
Recently joint radar communication (JRC) systems have gained considerable interest for several applications such as vehicular communications, indoor localization and activity recognition, covert military communications, and satellite-based remote sensing. In these frameworks, bistatic/passive radar deployments with directional beams explore the angular search space and identify mobile users/radar targets. Subsequently, directional communication links are established with these mobile users. Consequently, JRC parameters such as the time trade-off between the radar exploration and communication …
We propose an analytical framework based on stochastic geometry (SG) formulations to estimate a radar's detection performance under generalized discrete clutter conditions. We model the spatial distribution of discrete clutter scatterers as a homogeneous Poisson point process and the radar cross-section of each extended scatterer as a random variable of the Weibull distribution. Using this framework, we derive a metric called the radar detection coverage probability as a function of radar parameters such as transmitted power, system noise temperature and radar bandwidth; and clutter parameters…
In space-time adaptive processing (STAP) of the airborne radar system, it is very important to realize sparse restoration of the clutter covariance matrix with a small number of samples. In this paper, a clutter suppression method for airborne forward-looking array radar based on joint statistics and structural priority is proposed, which can estimate the clutter covariance matrix in the case of small samples. Assuming that the clutter covariance matrix obeys the inverse Wishart prior distribution, the maximum posterior estimate is obtained by using the low-rank symmetry of the matrix itself. …
Radar detection and communication can be operated simultaneously in joint radar-communication (JRC) system. In this paper, we propose a bistatic JRC system which is applicable in multi-path environments. Basing on a novel joint waveform, a joint detection process is designed for both target detection and channel estimation. Meanwhile, a low-cost channel equalization method that utilizes the channel state information acquired from the detection process is proposed. The numerical results show that the symbol error rate (SER) of the proposed system is similar to that of the binary frequency shift…
We propose two concepts for the significant improvement of surface current mapping with bistatic oceanographic High-Frequency Radars. These ameliorations pertain to the azimuthal processing of radar data with linear or quasi-linear antenna arrays. The first idea is to take advantage of the remote transmitter to perform an automatic correction of the complex gains of the receiving antennas based on the analysis of the signal received in the direct path. This direct signal can be found at the zero-Doppler and minimal range cell in the Range-Doppler representation. We term this adjustment as "sel…
In this paper, we address the problem of classifying clutter returns in order to partition them into statistically homogeneous subsets. The classification procedure relies on a model for the observables including latent variables that is solved by the expectation-maximization algorithm. The derivations are carried out by accounting for three different cases for the structure of the clutter covariance matrix. A preliminary performance analysis highlights that the proposed technique is a viable means to cluster clutter returns over the range.
The problem of radar detection in compound Gaussian clutter when a radar signature is not completely known has not been considered yet and is addressed in this paper. We proposed a robust technique to detect, based on the generalized likelihood ratio test, a point-like target embedded in compound Gaussian clutter. Employing an array of antennas, we assume that the actual steering vector departs from the nominal one, but lies in a known interval. The detection is then secured by employing a semi-definite programming. It is confirmed via simulation that the proposed detector experiences a neglig…
This work studies the problem of radar detection of correlated gamma-fluctuating targets in the presence of clutter described by compound models with correlated speckle. If the correlation is not accounted for in a radar model, the required signal-to-interference ratio for a given probability of detection will be incorrect, resulting in over-estimated performance. Although more generally applicable, the is focus on airborne maritime radar systems. Hence K-distributed sea clutter is used as the main example. Detection via square-law non-coherent pulse integration is formulated in a way that acc…
We investigate the constant-modulus (CM) waveform design for dual-function radar communication systems in the presence of clutter.To minimize the interference power and enhance the target acquisition performance, we use the signal-to-interference-plus-noise-ratio as the design metric.In addition, to ensure the quality of the service for each communication user, we enforce a constraint on the synthesis error of every communication signals.An iterative algorithm, which is based on cyclic optimization, Dinkinbach's transform, and alternating direction of method of multipliers, is proposed to tack…
Multifunction radars (MFR) are met with complex capability requirements, involving various kinds of targets and saturating scenarios. In order to achieve these goals, radar systems use Active Electronically Scanned Array (AESA) to switch between their functions. This complexity makes it difficult to assess their performance both taking into account their functional requirements and the induces cost. In this paper, we first introduce Figures of Merit for phased array radar operation and performance. We compute these metrics on a set of test scenarios of varying complexity, involving different k…
Narrowband and broadband indoor radar images significantly deteriorate in the presence of target dependent and independent static and dynamic clutter arising from walls. A stacked and sparse denoising autoencoder (StackedSDAE) is proposed for mitigating wall clutter in indoor radar images. The algorithm relies on the availability of clean images and corresponding noisy images during training and requires no additional information regarding the wall characteristics. The algorithm is evaluated on simulated Doppler-time spectrograms and high range resolution profiles generated for diverse radar f…
Millimeter wave radars are popularly used in last-mile radar-based defense systems. Detection of low-altitude airborne target using these radars at low-grazing angles is an important problem in the field of electronic warfare, which becomes challenging due to the significant effects of clutters in the terrain. This paper provides both experimental and analytical investigation of micro unmanned aerial vehicle (UAV) detection in a rocky terrain using a low grazing angle, surface-sited 24 GHz dual polarized frequency modulated continuous wave (FMCW) radar. The radar backscatter signal from the UA…
In this paper, we exploit the spiked covariance structure of the clutter plus noise covariance matrix for radar signal processing. Using state-of-the-art techniques high dimensional statistics, we propose a nonlinear shrinkage-based rotation invariant spiked covariance matrix estimator. We state the convergence of the estimated spiked eigenvalues. We use a dataset generated from the high-fidelity, site-specific physics-based radar simulation software RFView to compare the proposed algorithm against the existing Rank Constrained Maximum Likelihood (RCML)-Expected Likelihood (EL) covariance esti…
This paper addresses the problem that designing the transmit waveform and receive beamformer aims to maximize the receive radar SINR for secure dual-functional radar-communication (DFRC) systems, where the undesired multi-user interference (MUI) is transformed to useful power. In this system, the DFRC base station (BS) serves communication users (CUs) and detects the target simultaneously, where the radar target is regarded to be malicious since it might eavesdrop the transmitted information from BS to CUs. Inspired by the constructive interference (CI) approach, the phases of received signals…
In this paper, we propose a new solution for the detection problem of a coherent target in heterogeneous environments. Specifically, we first assume that clutter returns from different range bins share the same covariance structure but different power levels. This model meets the experimental evidence related to non-Gaussian and non-homogeneous scenarios. Then, unlike existing solutions that are based upon estimate and plug methods, we propose an approximation of the generalized likelihood ratio test where the maximizers of the likelihoods are obtained through an alternating estimation procedu…
This paper investigates regularized estimation of Kronecker-structured covariance matrices (CM) for polarization radar in sea clutter scenarios where the data are assumed to follow the complex, elliptically symmetric (CES) distributions with a Kronecker-structured CM. To obtain a well-conditioned estimate of the CM, we add penalty terms of Kullback-Leibler divergence to the negative log-likelihood function of the associated complex angular Gaussian (CAG) distribution. This is shown to be equivalent to regularizing Tyler's fixed-point equations by shrinkage. A sufficient condition that the solu…
In this paper, we address the problem of classifying data within the radar reference window in terms of statistical properties. Specifically, we partition these data into statistically homogeneous subsets by identifying possible clutter power variations with respect to the cells under test (accounting for possible range-spread targets) and/or clutter edges. To this end, we consider different situations of practical interest and formulate the classification problem as multiple hypothesis tests comprising several models for the operating scenario. Then, we solve the hypothesis testing problems b…
In millimeter-wave (mmWave) dual-function radar-communication (DFRC) systems, hybrid beamforming (HBF) is recognized as a promising technique utilizing a limited number of radio frequency chains. In this work, in the presence of extended target and clutters, a HBF design based on the subarray connection architecture is proposed for a multiple-input multiple-output (MIMO) DFRC system. In this HBF, the double-phase-shifter (DPS) structure is embedded to further increase the design flexibility. We derive the communication spectral efficiency (SE) and radar signal-to-interference-plus-noise-ratio …
This paper deals with the use of Reconfigurable Intelligent Surfaces (RISs) for radar surveillance in Non-Line Of Sight (N-LOS) scenarios. First of all, the geometry of the scene and the new system concept is described with emphasis on the required operative modes and the role played by the RIS. Then, the specific radar equation (including the RIS effect) is developed to manage the coverage requirements in the challenging region where the LOS is not present. Both noise and clutter interference cases (pulse length-limited and beamwidth-limited surface clutter as well as volume clutter) are cons…
In this paper, we present a tutorial overview of state-of-the-art radio frequency (RF) clutter modeling and simulation (M&S) techniques. Traditional statistical approximation based methods will be reviewed followed by more accurate physics-based stochastic transfer function clutter models that facilitate site-specific simulations anywhere on earth. The various factors that go into the computation of these transfer functions will be presented, followed by several examples across multiple RF applications. Finally, we introduce a radar challenge dataset generated using these tools that can enable…
We present a framework for simulating realistic inverse synthetic aperture radar images of automotive targets at millimeter wave frequencies. The model incorporates radar scattering phenomenology of commonly found vehicles along with range-Doppler based clutter and receiver noise. These images provide insights into the physical dimensions of the target, the number of wheels and the trajectory undertaken by the target. The model is experimentally validated with measurement data gathered from an automotive radar. The images from the simulation database are subsequently classified using both trad…
Unmanned aerial vehicles (UAVs) are widely used due to their low cost and versatility, but they also pose security and privacy threats. Therefore, reliable detection for low-altitude UAVs is an important issue. The strong ground clutter makes the radar echoes from small UAVs submerged in noise, resulting in low radar detection reliability. A low-altitude UAV detection method based on deep contrastive learning is proposed to address the above problems: Concretely, a low-altitude UAV radar echo model under low-altitude clutter interference is first established. Based on the echo components and t…
The spherically invariant random process (SIRP) clutter model is commonly used in scenarios where the radar clutter cannot be correctly modeled as a Gaussian process. In this short communication, we devise a novel Maximum-Likelihood (ML)-based iterative estimator for direction-of-departure and direction-of-arrival estimation in the Multiple-input multiple-output (MIMO) radar context in the presence of SIRP clutter. The proposed estimator employs a stepwise numerical concentration approach w.r.t. the objective function related to the marginal likelihood of the observation data. Our estimator le…
