In this paper, we analytically design a simple configuration of a broadband THz and polarization-insensitive absorber. The mentioned absorber consists of two layers of graphene disks, and the transmission line model is considered for the whole of the proposed absorber's structure to design it accurately. Therefore, the input admittance of the designed absorber is obtained by the transmission line model. Also, the real part of the input admittance is approximately tuned to be matched to the free space admittance. In contrast, the imaginary part of it is closely adjusted to zero around the central frequency of the THz absorber. Using only just two layers of Periodic Arrays of Graphene Disks (PAGDs) with one kind of dielectric as the material of substrates, it causes that the absorption of the structure can be achieved higher than 90 % by the Finite Element Method (FEM). Normalized bandwidth has reached up to 75.4% in 5 THz as the central frequency of the device. As the next step, we use the CST studio software to validate our designed absorber, and it will show that the numerical results will have the best matching with the analytical method.
Additive manufactured THz optics have been introduced as an efficient alternative to their commercial counterparts. Among various additive manufacturing methods, stereolithography provides superior spatial resolution and surface finish. However, examples of stereolithographically fabricated components for THz applications are still scarce. In this paper, we report on the fabrication process and performance of a stereolithographically fabricated broadband absorber for the THz spectral range. Simple THz transmission experiments were carried out for the absorber and bulk reference samples. The ex…
The implementation of terahertz (THz) wafer-level metadevices is critical to advance the science for applications including (I) integrated focal plane array which can image for biology and (II) integrated narrowband absorbers for high spectral resolution THz spectroscopy. Substantial progress has been made in the development of THz metamaterials; however, a wafer-level low-stress THz metadevices platform remains a challenge. This paper experimentally demonstrates a substrate-free THz metadevices platform adopting engineered Si-rich and low-stress silicon nitride (SiNx) thin films, achieving an…
Metamaterial-based absorbers have been extensively investigated in the terahertz (THz) range with ever increasing performances. In this paper, we propose an all-dielectric THz absorber based on doped silicon. The unit cell consists of a silicon cross resonator with an internal cross-shaped air cavity. Numerical results suggest that the proposed absorber can operate from THz to mid-infrared, having an average power absorption of >95% between 0.6 and 10 THz. Experimental results using THz time-domain spectroscopy show a good agreement with simulations. The underlying mechanisms for broadband abs…
In this paper, we analytically design a simple configuration of a broadband THz and polarization-insensitive absorber. The mentioned absorber consists of two layers of graphene disks, and the transmission line model is considered for the whole of the proposed absorber's structure to design it accurately. Therefore, the input admittance of the designed absorber is obtained by the transmission line model. Also, the real part of the input admittance is approximately tuned to be matched to the free space admittance. In contrast, the imaginary part of it is closely adjusted to zero around the centr…
We demonstrate saturable absorber behavior of n-type semiconductors GaAs, GaP and Ge in THz frequency range at room temperature using nonlinear THz spectroscopy. The saturation mechanism is based on a decrease in electron conductivity of semiconductors at high electron momentum states, due to conduction band nonparabolicity and scattering into satellite valleys in strong THz fields. Saturable absorber parameters, such as linear and non-saturable transmission, and saturation fluence, are extracted by fits to a classic saturable absorber model. Further, we observe THz pulse shortening, and an in…
Terahertz (THz) metamaterials have been developed for THz sensing, detection, imaging, and many other functions due to their unusual absorbers. However, the unusual absorption spectra change with different incident angles. Thus, we designed and fabricated a focal plane array with metal-insulator-metal (MIM) structure metamaterial absorbers for further research. The absorption spectrum with incident angles from 20 to 60 was measured using THz time-domain spectroscopy (THz-TDS), and the experimental results reveal that the absorption spectrum changes with incident angle variations. A basic analy…
We demonstrated an ultra-broadband, polarization-insensitive and wide-angle metamaterial absorber for terahertz (THz) frequencies using arrays of truncated pyramid unit structure made of metal-dielectric multilayer composite. In our design each sub-layer behaving as an effective waveguide is gradually modified in their lateral width to realize a wideband response by effectively stitching together the resonance bands of different waveguide modes. Experimentally, our five layer sample with a total thickness 21um is capable of producing a large absorptivity above 80% from 0.7 to 2.3 THz up to the…
We show that a perfect absorber/thermal emitter exhibiting an absorption peak of 99.9% can be achieved in metallic nanostructures that can be easily fabricated. The very high absorption is maintained for large angles with a minimal shift in the center frequency and can be tuned throughout the visible and near-infrared regime by scaling the nanostructure dimensions. The stability of the spectral features at high temperatures is tested by simulations using a range of material parameters.
High absorption in a wide frequency band has attracted considerable interest since their potential applications in frequency spectrum imaging systems and anti-radar cloaking. In this paper, a polarization-independent, ultra-broadband and omnidirectional terahertz absorber is proposed, fabricated and evaluated. It is experimentally demonstrated that an over 95% absorption can be obtained in the frequency range of 0.75~2.41 THz. Attributing to the multi-frequency destructive interference between the layers and the impedance-matching condition of the grating, five successive absorption peaks at 0…
A nearly omni-directional THz absorber for both transverse electric (TE) and transverse magnetic (TM) polarizations is proposed. Through the excitation of magnetic polariton in a metal-dielectric layer, the incident light is perfectly absorbed in a thin thickness which is about 25 times smaller than the resonance wavelength. By simply stacking several such structural layers with different geometrical dimensions, the bandwidth of this strong absorption can be effectively enhanced due to the hybridization of magnetic polaritons in different layers.
In this paper, a plasmonic absorber consisting of a metal-dielectric-metal stack with a top layer of Sierpinski nanocarpet is theoretically investigated. Such compact absorber depicts broadband angle-independent behavior over a wide optical wavelength range ($400-700$ nm) and a broad range of angles of light incidence ($0-80^{\circ}$). Including several feature sizes, such fractal-like structure shows widely strong extinction ($85-99$%) response for either transverse electric or magnetic polarization states under normal incidence. Underlying mechanisms of absorbance due to excited surface plas…
Frequency Band of 0.5 THz to 1.1 THz (WR1.5 and WR1) is one of the promising bands when it comes to 6G. In this paper, we propose a novel metamaterial absorber suitable to be used at lower WR1 frequencies in TE mode. Alternatively, the design can be used as a strong absorber at lower Terahertz frequencies. In addition, when used in TM mode the absorber works as a perfect absorber at higher WR1 band.
Intersubband (ISB) transitions in semiconductor multi-quantum well (MQW) structures are promising candidates for the development of saturable absorbers at terahertz (THz) frequencies. Here, we exploit amplitude and phase-resolved two-dimensional (2D) THz spectroscopy on the sub-cycle time scale to observe directly the saturation dynamics and coherent control of ISB transitions in a metal-insulator MQW structure. Clear signatures of incoherent pump-probe and coherent four-wave mixing signals are recorded as a function of the peak electric field of the single-cycle THz pulses. All nonlinear sign…
In this paper, we have proposed ultra-broadband terahertz absorber with three layers of periodic graphene disks arrays (PGDAs). A gold layer was utilized as backside reflector and TOPAS as dielectric spacers. Circuit model of PGDAs and the developed Transmission Line Model (TLM) for the absorber is utilized to design the structure using impedance matching concept. The validity of the results of the device was confirmed by Finite Element Method (FEM). The structure absorbs both TE and TM polarizations. Furthermore, the obtained normalized absorption bandwidth is 148% with a bandwidth of 2.64 TH…
Metamaterial perfect absorbers from microwaves to optical part of the electromagnetic spectrum has been intensely studied for its ability to absorb electromagnetic radiation. Perfect absorption of light by metamaterials have opened up new opportunities for application oriented functionalities such as efficient sensors and emitters. We present an absorber based sensing scheme at the terahertz frequencies and discuss optimized designs to achieve high frequency and amplitude sensitivities. The major advantage of a perfect metamaterial absorber as a sensor is the sensitive shift in the absorber re…
We present an asymmetric bifacial graphene metasurface to realize tunable and broadband coherent perfect absorption (CPA) at terahertz (THz) frequencies. The proposed design is composed of two dissimilar graphene square patch metasurfaces stacked over an ultrathin dielectric substrate. Nonlinear CPA performance without resorting to optical nonlinearities and amplification are demonstrated based on wave interference phenomena taking place along and inside this subwavelength structure. Broadband asymmetric reflection from opposite directions is obtained in the case of single wave illumination. T…
This article presents a novel approach for designing dual-band absorbers based on graphene and metallic metasurfaces for terahertz and mid-infrared regimes, respectively. The absorbers are composed of a two-dimensional (2D) array of square patches deposited on a dielectric film terminated by a metal plate. Using an analytical circuit model, we obtain closed-form relations for different parameters of the structure to achieve the dual-band absorber. Two absorption bands with obtained absorptivity of 98% at 0.55 and 1.54 THz for the graphene-based structure and 7 and 25 THz for the metallic-based…
Increasing attention on microwave ultra-broadband metamaterial absorbers has been paid due to their promising applications. While most microwave ultra-broadband metamaterial absorbers developed so far are based on metallic resonant structures, dispersive dielectric water-based metamaterial opens a simpler and more versatile route for the construction of polarization- and angle- insensitive ultra-broadband absorption. Here, we review the recent progresses of water-based metamaterial absorber by providing an illustration of the mechanisms to realize ultra-broadband, tunable and multi-functional …
The nonlinear interaction between Near-Infrared (NIR) and Terahertz pulses is principally investigated as a means for the detection of radiation in the hardly accessible THz spectral region. Most studies have targeted second-order nonlinear processes, given their higher efficiencies, and only a limited number have addressed third-order nonlinear interactions, mainly investigating four-wave mixing in air for broadband THz detection. We have studied the nonlinear interaction between THz and NIR pulses in solid-state media (specifically diamond), and we show how the former can be frequency-shifte…
Frequency band of 30 to 300 GHz, which is termed as mm wave band offers 100 times bandwidth as compared to sub 6 GHz band. In this study, we propose a novel design which acts as a near unity absorber at 258 GHz or 0.258 THz in Y polarization and 292 GHz or 0.292 THz in X polarization. The study also includes effect of change in parameters on resonance frequency in both X and Y polarization which allows us to use same design with modified parameters to get near unity absorptivity in frequency of 205 to 345 GHz. Further, we also discuss on higher frequency mode which particularly appears in Y po…
We present quasi-analytical solutions (QANS) of hybrid platform (HP) comprising metallic grating (MG) and stacked-dielectric layers for terahertz (THz) radiation. The QANS are validated by finite difference time domain simulation. It is found that the Wood anomalies induce the high-order spoof surface plasmon resonances in the HP. The QANS are applied to optimize new perfect absorber for THz sensing of large-area thin film with ultrahigh figure of merit reaching fifth order of magnitude for the film thickness 0.0001p (p: MG period). The first-order Wood's anomaly of the insulator layer and the…
We provide an analysis of the electromagnetic modes of three-dimensional metamaterial resonators in the THz frequency range. The fundamental resonance of the structures is fully described by an analytical circuit model, which not only reproduces the resonant frequencies but also the coupling of the metamaterial with an incident THz radiation. We also evidence the contribution of the propagation effects, and show how they can be reduced by design. In the optimized design the electric field energy is lumped into ultra-subwavelength ($λ$/100) capacitors, where we insert semiconductor absorber bas…
Here we make use of vanadium dioxide (VO2) to design a bifunctional metasurface working at the same targeted frequency. With the increase of temperature, the functionality of the designed metasurface can switch from a multi-channel retroreflector to a perfect absorber, caused by the phase transition of VO2 from insulator to conductor. Different from traditional bifunctional metasurfaces designed by simple composition of two functionalities, our proposed bifunctional metasurface is based on the interaction between two functionalities. The device shows good potential for the combination of wavef…
This article presents two dual-band absorbers based on graphene one dimensional (1D) / two dimensional (2D) patterned arrays in the THz frequencies. In comparison to the previous work, the structure of the proposed device is very simple. Most dual-band absorbers are based on mixing resonances of resonators with different sizes inside the structure. In this paper, the proposed absorber is based on the arrays of one element. Dual capacitive-inductive nature of the graphene patterned array and the impedance matching condition are used to achieve two resonance bands with perfect absorption by adju…
We propose a thin, compact, broadband, polarization and angle insensitive metamaterial absorber based on a tungsten reflector, silicon spacer and a top pattern composed of a double square-like ring resonator utilizing nickel(Ni). In such a structure, a high absorption (above 80 %) bandwidth ~ 4.8 μm from 3.52 up to 8.32 μm corresponding to the relative bandwidth ~81% can be achieved with deeply subwavelength unit cell dimensions. Here the physical origin of the broadband absorption is associated with low Q-factor dipole modes of the top pattern inner and outer sides functioning as rectangular …
The invisibility cloak has been a long-standing dream for many researchers over the decades. The introduction of transformational optics has revitalized this field by providing a general method to design material distributions to hide the subject from detection. By transforming space and light propagation, a three-dimensional (3D) object is perceived as having a reduced number of dimensions, in the form of points, lines, and thin sheets, making it "undetectable" judging from the scattered field. Although a variety of cloaking devices have been reported at microwave and optical frequencies, the…
Monitoring and controlling the state of polarization of electromagnetic waves is of significant interest for various basic and practical applications such as linear position sensing and medical imaging. Here, we propose the first conformal digital metamaterial absorber to detect the polarization state of THz incident waves. The proposed polarimeter is capable of characterizing four independent polarization states of (TE, TM, $\pm {45^\circ}$ linear, and RCP/LCP) by observing the reflectivity of the structure with respect to the x- and y-direction. Besides, the proposed structure displays a str…
We designed and demonstrated a multi-spectral programmable perfect absorber that exploits two different phase-change materials. This programmability is possible by resonantly coupling two phase change materials, a Ge2Sb2Te5 layer to vanadium dioxide nanoparticles (VO2 NPs). The perfect absorption is attributed to the coalescence of gap plasmon modes excited between the NPs and waveguide cavity-like modes excited between the film and the NPs. The absorptance peak (>90%) can be tuned to four different infrared (IR) wavelengths from 1906 to 2960 nm by heating the structure to different temperatur…
We demonstrate thin, flexible, metamaterial films with a strong, narrowband, polarization- and angle-insensitive absorption designed for wavelengths near one millimeter. These structures, fabricated by photolithography on a commercially available, copper-backed polyimide substrate, are nearly indistinguishable to the unaided human eye but can be easily observed by imaging at the resonance frequency of the film. We demonstrate that these patterns can be used to mark or barcode objects for secure identification with a terahertz imaging system.
We demonstrate an efficient double-layer light absorber by exciting plasmonic phase resonances. We show that the addition of grooves can cause mode splitting of the plasmonic waveguide cavity modes and all the new resonant modes exhibit large absorptivity greater than 90%. Some of the generated absorption peaks have wide-angle characteristics. Furthermore, we find that the proposed structure is fairly insensitive to the alignment error between different layers. The proposed plasmonic nano-structure designs may have exciting potential applications in thin film solar cells, thermal emitters, nov…
We report on a waveguide engineering technique that enables the generation of a bandwidth up to 1 THz and record ultra-short pulse length of 2.5 ps in injection seeded terahertz quantum cascade lasers. The reported technique is able to control and fully suppress higher order lateral modes in broadband terahertz quantum cascade lasers by introducing side-absorbers to metal-metal waveguides. The side-absorbers consist of a top metalization set-back with respect to the laser ridge and an additional lossy metal layer. In continuous wave operation the side-absorbers lead to octave spanning laser em…
Metasurfaces are engineered thin surfaces comprising two dimensional (2D) arrays of sub-wavelength spaced and sub-wavelength sized resonators. Metasurfaces can locally manipulate the amplitude, phase and polarization of light with high spatial resolution. In this study, we report numerical and experimental results of a vortex-beam-generating metasurface fabricated specifically for infrared (IR) and terahertz (THz) wavelengths. The designed metasurface consisted of a 2D array of dielectric cross-shaped resonators with spatially varying length, thereby providing desired spatially varying phase s…
The loss of surface plasmon polaritons has long been considered as a fatal shortcoming in information transport. Here we propose a plasmonic absorber utilizing this "shortcoming" to absorb the stray light in photonic integrated circuits (PICs). Based on adiabatic mode evolution, its performance is insensitive to incident wavelength with bandwidth larger than 300nm, and robust against surrounding environment and temperature. Besides, the use of metal enables it to be very compact and beneficial to thermal dissipation. With this 40um-long absorber, the absorption efficiency can be over 99.8% at …
The experimental investigation of a broadband far-infrared meta-material absorber is described. The observed absorptance is $>\,0.95$ from ${\rm 1-20\,THz}$ (${\rm 300-15\,μm}$) over a temperature range spanning ${\rm 5-300\,K}$. The meta-material, realized from an array of tapers ${\rm \approx 100\,μm}$ in length, is largely insensitive to the detailed geometry of these elements and is cryogenically compatible with silicon-based micro-machined technologies. The electromagnetic response is in general agreement with a physically motivated transmission line model.
A metamaterial absorber converts solar radiation into heat for applications in thermoelectric generators and solar thermophotovoltaics. A metamaterial absorber typically consists of metallic parts separated by an insulator layer which does not allow the total heat extraction via direct heat conduction. Here, we propose wide-angle and broadband metamaterial absorber comprising an insulator layer, metal grating, and metal back plane (IMM) that allows the total heat extraction via direct heat conduction. We have formulated the quasi-analytical solution (QANS) of the IMM-absorber by applying the c…
Absorption of terahertz waves by a metasurface comprising a biperiodic array of pixellated meta-atoms on top of a dielectric substrate backed by a perfect electric conductor was simulated using a commercial software, with either all or a few of the pixels in every meta-atom patched with graphene. Absorptances as high as 0.99 over a 1.16-THz-wide spectral regime for normal incidence were found for a metasurface comprising meta-atoms with only a few pixels patched with graphene, regardless of the polarization state. In comparison to metasurface absorbers comprising two graphene layers separated …
We present optically tunable magnetic 3D metamaterials at terahertz (THz) frequencies which exhibit a tuning range of ~30% of the resonance frequency. This is accomplished by fabricating 3D array structures consisting of double-split-ring resonators (DSRRs) on silicon-on-sapphire, fabricated using multilayer electroplating. Photoexcitation of free carriers in the silicon within the capacitive region of the DSRR results in a red-shift of the resonant frequency from 1.74 THz to 1.16 THz. The observed frequency shift leads to a transition from a magnetic-to-bianisotropic response as verified thro…
High input intensities are usually required to efficiently excite optical nonlinear effects in ultrathin structures. This problem is particularly critical at terahertz (THz) frequencies because high input power THz sources are not available. The demonstration of enhanced nonlinear effects at THz frequencies is particularly important since these nonlinear mechanisms promise to play a significant role in the development and design of new reconfigurable planar THz nonlinear devices. In this work, we present a novel class of ultrathin nonlinear hybrid planar THz devices based on graphene-covered p…
We propose an efficient multiband absorber comprising a truncated one-dimensional periodic metal-dielectric photonic crystal and a reflective substrate. The reflective substrate is actually an optically thick metallic film. Such a planar device is easier to fabricate compared with the absorbers with complicated shapes. For a 4-unit cell device, all of the four absorption peaks can be optimized with efficiencies higher than 95%. Moreover, those absorption peaks are insensitive to both polarization and incident angle. The influences of the geometrical parameters along with the refractive index o…
The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersubband gain medium, self-lock the optical modes in phase, allowing stable comb operation, albeit over a restricted dynamic range (~ 20% of the laser operational range). Here, we engineer miniaturized T…
The development of responsive metamaterials has enabled the realization of compact tunable photonic devices capable of manipulating the amplitude, polarization, wave vector, and frequency of light. Integration of semiconductors into the active regions of metallic resonators is a proven approach for creating nonlinear metamaterials through optoelectronic control of the semiconductor carrier density. Metal-free subwavelength resonant semiconductor structures offer an alternative approach to create dynamic metamaterials. We present InAs plasmonic disk arrays as a viable resonant metamaterial at t…
We propose a novel analytical model for anisotropic multi-layer cylindrical structures containing graphene layers. The general structure is formed by an aperiodic repetition of a three-layer sub-structure, where a graphene layer, with an isotropic surface conductivity, has been sandwiched between two adjacent magnetic materials. An external magnetic bias has been applied in the axial direction. General matrix representation is obtained in our proposed analytical model to find the dispersion relation. The relation will be used to find the effective index of the structure and its other propagati…
Black phosphorus (BP), a relative new plasmonic two-dimensional (2D) material, offers unique photonic and electronic properties. In this work, we propose a new tunable and broadband ultrathin coherent perfect absorber (CPA) device operating in the terahertz (THz) frequency range. It is based on a bifacial metasurface made of BP patch periodic arrays separated by a thin dielectric layer. Broadband CPA bandwidth is realized due to the ultrathin thickness of the proposed device and the extraordinary properties of BP. In addition, a substantial modulation between CPA and complete transparency is a…
This paper presents a novel analytical model for chiral multi-layer waveguides incorporating graphene sheets. The general structure is composed of various chiral layers, where a graphene sheet has been sandwiched between two adjacent chiral layers. We have chosen and studied this general structure to suggest a new platform for novel emerging sciences such as optical sensing. An analytical model has been proposed for the general structure to find its dispersion relation and other modal properties such as the effective index and the propagation length. To show the richness of our general structu…
This article aims to propose a novel analytical model for anisotropic multi-layer elliptical structures incorporating graphene layers. The multi-layer structure is formed of various magnetic materials. An external magnetic bias has been applied in the axial direction. A graphene layer, with isotropic surface conductivity, has been sandwiched between two adjacent anisotropic materials. A novel matrix representation has been derived to find the propagation parameters of the multi-layer structure. Two exemplary important cases of the proposed general structure, as waveguides, have been investigat…
In this paper, we proposed a theoretical model in the far-infrared and terahertz (THz) bands, which is a dumbbell-shaped graphene metamaterial arrays with a combination of graphene nanorod and two semisphere-suspended heads. We report a detailed theoretical investigation on how to enhance localized electric field and the absorption in the dumbbell-shaped graphene metamaterial arrays. The simulation results show that by changing the geometrical parameters of the structure and the Fermi level of graphene, we can change the absorption characteristics. Furthermore, we have discovered that the reso…
Theoretical study of arrays of graphene ribbons is currently of high interest due to its potential application in beam splitters, absorbers, and polarizers. In this paper, an analytical method is presented for diffraction analysis of graphene ribbon arrays. Previous analytical studies were carried out in the regime where the lateral separation between the ribbons is much smaller than the wavelength of the incident wave. As such, they could not be used to calculate the reflection coefficients of higher diffracted orders. By contrast, the method proposed here can predict electromagnetic response…
This article proposes a novel analytical model for the anisotropic multi-layer structures containing magnetically biased graphene sheets. The multi-layer structure is composed of various magnetic materials. An external magnetic field is applied, normal to the structure surface. Each graphene sheet, with an anisotropic conductivity tensor, has been sandwiched between two adjacent magnetic materials. Our model is used to find the dispersion relation of the structure. Now, obtaining plasmonic features of the structure, such as the effective index and propagation loss is straightforward. Four exem…
