In this paper, we have proposed ultra-broadband terahertz absorber with three layers of periodic graphene disks arrays (PGDAs). A gold layer was utilized as backside reflector and TOPAS as dielectric spacers. Circuit model of PGDAs and the developed Transmission Line Model (TLM) for the absorber is utilized to design the structure using impedance matching concept. The validity of the results of the device was confirmed by Finite Element Method (FEM). The structure absorbs both TE and TM polarizations. Furthermore, the obtained normalized absorption bandwidth is 148% with a bandwidth of 2.64 THz in 1.78 THz central frequency which is to best of our knowledge the best report in two-dimensional graphene-based structures.
Frequency Band of 0.5 THz to 1.1 THz (WR1.5 and WR1) is one of the promising bands when it comes to 6G. In this paper, we propose a novel metamaterial absorber suitable to be used at lower WR1 frequencies in TE mode. Alternatively, the design can be used as a strong absorber at lower Terahertz frequencies. In addition, when used in TM mode the absorber works as a perfect absorber at higher WR1 band.
A nearly omni-directional THz absorber for both transverse electric (TE) and transverse magnetic (TM) polarizations is proposed. Through the excitation of magnetic polariton in a metal-dielectric layer, the incident light is perfectly absorbed in a thin thickness which is about 25 times smaller than the resonance wavelength. By simply stacking several such structural layers with different geometrical dimensions, the bandwidth of this strong absorption can be effectively enhanced due to the hybridization of magnetic polaritons in different layers.
High absorption in a wide frequency band has attracted considerable interest since their potential applications in frequency spectrum imaging systems and anti-radar cloaking. In this paper, a polarization-independent, ultra-broadband and omnidirectional terahertz absorber is proposed, fabricated and evaluated. It is experimentally demonstrated that an over 95% absorption can be obtained in the frequency range of 0.75~2.41 THz. Attributing to the multi-frequency destructive interference between the layers and the impedance-matching condition of the grating, five successive absorption peaks at 0…
In this paper the design for an absorbing metamaterial with near unity absorbance in terahertz region is presented. The absorber's unit cell structure consists of two metamaterial resonators that couple to electric and magnetic fields separately. The structure allows us to maximize absorption by varying dielectric material and thickness and, hence the effective electrical permittivity and magnetic permeability.
In this paper, a plasmonic absorber consisting of a metal-dielectric-metal stack with a top layer of Sierpinski nanocarpet is theoretically investigated. Such compact absorber depicts broadband angle-independent behavior over a wide optical wavelength range ($400-700$ nm) and a broad range of angles of light incidence ($0-80^{\circ}$). Including several feature sizes, such fractal-like structure shows widely strong extinction ($85-99$%) response for either transverse electric or magnetic polarization states under normal incidence. Underlying mechanisms of absorbance due to excited surface plas…
Intersubband (ISB) transitions in semiconductor multi-quantum well (MQW) structures are promising candidates for the development of saturable absorbers at terahertz (THz) frequencies. Here, we exploit amplitude and phase-resolved two-dimensional (2D) THz spectroscopy on the sub-cycle time scale to observe directly the saturation dynamics and coherent control of ISB transitions in a metal-insulator MQW structure. Clear signatures of incoherent pump-probe and coherent four-wave mixing signals are recorded as a function of the peak electric field of the single-cycle THz pulses. All nonlinear sign…
The nonlinear interaction between Near-Infrared (NIR) and Terahertz pulses is principally investigated as a means for the detection of radiation in the hardly accessible THz spectral region. Most studies have targeted second-order nonlinear processes, given their higher efficiencies, and only a limited number have addressed third-order nonlinear interactions, mainly investigating four-wave mixing in air for broadband THz detection. We have studied the nonlinear interaction between THz and NIR pulses in solid-state media (specifically diamond), and we show how the former can be frequency-shifte…
We present a superconducting metamaterial saturable absorber at terahertz frequencies. The absorber consists of an array of split ring resonators (SRRs) etched from a 100nm YBaCu3O7 (YBCO) film. A polyimide spacer layer and gold ground plane are deposited above the SRRs, creating a reflecting perfect absorber. Increasing either the temperature or incident electric field (E) decreases the superconducting condensate density and corresponding kinetic inductance of the SRRs. This alters the impedance matching in the metamaterial, reducing the peak absorption. At low electric fields, the absorption…
Absorption of terahertz waves by a metasurface comprising a biperiodic array of pixellated meta-atoms on top of a dielectric substrate backed by a perfect electric conductor was simulated using a commercial software, with either all or a few of the pixels in every meta-atom patched with graphene. Absorptances as high as 0.99 over a 1.16-THz-wide spectral regime for normal incidence were found for a metasurface comprising meta-atoms with only a few pixels patched with graphene, regardless of the polarization state. In comparison to metasurface absorbers comprising two graphene layers separated …
We report on a waveguide engineering technique that enables the generation of a bandwidth up to 1 THz and record ultra-short pulse length of 2.5 ps in injection seeded terahertz quantum cascade lasers. The reported technique is able to control and fully suppress higher order lateral modes in broadband terahertz quantum cascade lasers by introducing side-absorbers to metal-metal waveguides. The side-absorbers consist of a top metalization set-back with respect to the laser ridge and an additional lossy metal layer. In continuous wave operation the side-absorbers lead to octave spanning laser em…
We present the design, numerical simulations and experimental measurements of THz metamaterial absorbers with a broad and flat absorption top both for transverse electric and transverse magnetic polarizations over a wide incidence angle range. The metamaterial absorber unit cell consists of two sets of structures resonating at different but close frequencies. The overall absorption spectrum is the superposition of individual components and becomes flat at the top over a significant bandwidth. The experimental results are in excellent agreement with numerical simulations.
We present quasi-analytical solutions (QANS) of hybrid platform (HP) comprising metallic grating (MG) and stacked-dielectric layers for terahertz (THz) radiation. The QANS are validated by finite difference time domain simulation. It is found that the Wood anomalies induce the high-order spoof surface plasmon resonances in the HP. The QANS are applied to optimize new perfect absorber for THz sensing of large-area thin film with ultrahigh figure of merit reaching fifth order of magnitude for the film thickness 0.0001p (p: MG period). The first-order Wood's anomaly of the insulator layer and the…
Metamaterial perfect absorbers from microwaves to optical part of the electromagnetic spectrum has been intensely studied for its ability to absorb electromagnetic radiation. Perfect absorption of light by metamaterials have opened up new opportunities for application oriented functionalities such as efficient sensors and emitters. We present an absorber based sensing scheme at the terahertz frequencies and discuss optimized designs to achieve high frequency and amplitude sensitivities. The major advantage of a perfect metamaterial absorber as a sensor is the sensitive shift in the absorber re…
It is believed that passive mode locking is virtually impossible in quantum cascade lasers (QCLs) because of too fast carrier relaxation time. Here, we revisit this possibility and theoretically show that stable mode locking and pulse durations in the few cycle regime at terahertz (THz) frequencies are possible in suitably engineered bound-to-continuum QCLs. We achieve this by utilizing a multi-section cavity geometry with alternating gain and absorber sections. The critical ingredients are the very strong coupling of the absorber to both field and environment as well as a fast absorber carrie…
The development of responsive metamaterials has enabled the realization of compact tunable photonic devices capable of manipulating the amplitude, polarization, wave vector, and frequency of light. Integration of semiconductors into the active regions of metallic resonators is a proven approach for creating nonlinear metamaterials through optoelectronic control of the semiconductor carrier density. Metal-free subwavelength resonant semiconductor structures offer an alternative approach to create dynamic metamaterials. We present InAs plasmonic disk arrays as a viable resonant metamaterial at t…
In this paper, we analytically design a simple configuration of a broadband THz and polarization-insensitive absorber. The mentioned absorber consists of two layers of graphene disks, and the transmission line model is considered for the whole of the proposed absorber's structure to design it accurately. Therefore, the input admittance of the designed absorber is obtained by the transmission line model. Also, the real part of the input admittance is approximately tuned to be matched to the free space admittance. In contrast, the imaginary part of it is closely adjusted to zero around the centr…
Terahertz (THz) metamaterials have been developed for THz sensing, detection, imaging, and many other functions due to their unusual absorbers. However, the unusual absorption spectra change with different incident angles. Thus, we designed and fabricated a focal plane array with metal-insulator-metal (MIM) structure metamaterial absorbers for further research. The absorption spectrum with incident angles from 20 to 60 was measured using THz time-domain spectroscopy (THz-TDS), and the experimental results reveal that the absorption spectrum changes with incident angle variations. A basic analy…
In this paper, we analytically design a simple configuration of a broadband THz and polarization-insensitive absorber. The mentioned absorber consists of two layers of graphene disks, and the transmission line model is considered for the whole of the proposed absorber's structure to design it accurately. Therefore, the input admittance of the designed absorber is obtained by the transmission line model. Also, the real part of the input admittance is approximately tuned to be matched to the free space admittance. In contrast, the imaginary part of it is closely adjusted to zero around the centr…
We demonstrate thin, flexible, metamaterial films with a strong, narrowband, polarization- and angle-insensitive absorption designed for wavelengths near one millimeter. These structures, fabricated by photolithography on a commercially available, copper-backed polyimide substrate, are nearly indistinguishable to the unaided human eye but can be easily observed by imaging at the resonance frequency of the film. We demonstrate that these patterns can be used to mark or barcode objects for secure identification with a terahertz imaging system.
The invisibility cloak has been a long-standing dream for many researchers over the decades. The introduction of transformational optics has revitalized this field by providing a general method to design material distributions to hide the subject from detection. By transforming space and light propagation, a three-dimensional (3D) object is perceived as having a reduced number of dimensions, in the form of points, lines, and thin sheets, making it "undetectable" judging from the scattered field. Although a variety of cloaking devices have been reported at microwave and optical frequencies, the…
This article presents a novel approach for designing dual-band absorbers based on graphene and metallic metasurfaces for terahertz and mid-infrared regimes, respectively. The absorbers are composed of a two-dimensional (2D) array of square patches deposited on a dielectric film terminated by a metal plate. Using an analytical circuit model, we obtain closed-form relations for different parameters of the structure to achieve the dual-band absorber. Two absorption bands with obtained absorptivity of 98% at 0.55 and 1.54 THz for the graphene-based structure and 7 and 25 THz for the metallic-based…
We demonstrate an efficient double-layer light absorber by exciting plasmonic phase resonances. We show that the addition of grooves can cause mode splitting of the plasmonic waveguide cavity modes and all the new resonant modes exhibit large absorptivity greater than 90%. Some of the generated absorption peaks have wide-angle characteristics. Furthermore, we find that the proposed structure is fairly insensitive to the alignment error between different layers. The proposed plasmonic nano-structure designs may have exciting potential applications in thin film solar cells, thermal emitters, nov…
We demonstrated an ultra-broadband, polarization-insensitive and wide-angle metamaterial absorber for terahertz (THz) frequencies using arrays of truncated pyramid unit structure made of metal-dielectric multilayer composite. In our design each sub-layer behaving as an effective waveguide is gradually modified in their lateral width to realize a wideband response by effectively stitching together the resonance bands of different waveguide modes. Experimentally, our five layer sample with a total thickness 21um is capable of producing a large absorptivity above 80% from 0.7 to 2.3 THz up to the…
Emerging technology based on artificial materials containing metallic structures has raised the prospect for unprecedented control of terahertz waves through components like filters, absorbers and polarizers. The functionality of these devices is static by the very nature of their metallic or polaritonic composition, although some degree of tunability can be achieved by incorporating electrically biased semiconductors. Here, we demonstrate a photonic structure by projecting the optical image of a metal mask onto a thin GaAs substrate using a femtosecond pulsed laser source. We show that the re…
It is commonly believed that weak light-matter interactions in low-mobility graphene dramatically limits tunability of graphene-based optoelectronic devices, such as tunable absorbers or switches. In this paper, we develop and use a simple circuit model to understand absorption in graphene sheets. In particular, we show that light interacts weakly also with very high-mobility graphene sheets and propose systematic design means to overcome these problems. The results have allowed us to demonstrate in the terahertz band that perfect absorption with excellent electrical tunability can be achieved…
There has been a significant advancement in terahertz radiation sources in the past decade, making milliwatt terahertz power levels accessible in both continuous-wave and pulsed operation. Such high-power terahertz radiation sources circumvent the need for cryogenic-cooled terahertz detectors such as semiconductor bolometers and necessitate the need for new types of calibrated, room-temperature terahertz detectors. Among various types of room-temperature terahertz detectors, pyroelectric detectors are one of the most widely used detectors, which can offer wide dynamic range, broad detection ba…
Increasing attention on microwave ultra-broadband metamaterial absorbers has been paid due to their promising applications. While most microwave ultra-broadband metamaterial absorbers developed so far are based on metallic resonant structures, dispersive dielectric water-based metamaterial opens a simpler and more versatile route for the construction of polarization- and angle- insensitive ultra-broadband absorption. Here, we review the recent progresses of water-based metamaterial absorber by providing an illustration of the mechanisms to realize ultra-broadband, tunable and multi-functional …
Utilizing solar energy requires perfect absorption by photovoltaic cells for efficient conversion of solar energy into useful electrical energy. Metasurfaces can, not only be used to absorb solar energy efficiently but, they do so with thickness of structure in nano-scale -effectively reducing the size of the device. To achieve aforementioned feature metasurface absorbers are developed which give better absorbance on narrow/wide frequency spectrum. These absorbers are fashioned with variable structures employing variable materials but still, perfect absorbance is not attained with a simple two…
We present optically tunable magnetic 3D metamaterials at terahertz (THz) frequencies which exhibit a tuning range of ~30% of the resonance frequency. This is accomplished by fabricating 3D array structures consisting of double-split-ring resonators (DSRRs) on silicon-on-sapphire, fabricated using multilayer electroplating. Photoexcitation of free carriers in the silicon within the capacitive region of the DSRR results in a red-shift of the resonant frequency from 1.74 THz to 1.16 THz. The observed frequency shift leads to a transition from a magnetic-to-bianisotropic response as verified thro…
Plasmonics offer an exciting way to mediate the interaction between light and matter, allowing strong field enhancement and confinement, large absorption and scattering at resonance. However, simultaneous realization of ultra-narrow band perfect absorption and electromagnetic field enhancement is challenging due to the intrinsic high optical losses and radiative damping in metals. Here, we propose an all-metal plasmonic absorber with an absorption bandwidth less than 8nm and polarization insensitive absorptivity exceeding 99%. Unlike traditional Metal-Dielectric-Metal configurations, we demons…
Metamaterial-based absorbers have been extensively investigated in the terahertz (THz) range with ever increasing performances. In this paper, we propose an all-dielectric THz absorber based on doped silicon. The unit cell consists of a silicon cross resonator with an internal cross-shaped air cavity. Numerical results suggest that the proposed absorber can operate from THz to mid-infrared, having an average power absorption of >95% between 0.6 and 10 THz. Experimental results using THz time-domain spectroscopy show a good agreement with simulations. The underlying mechanisms for broadband abs…
Continuous Wave (CW) Terahertz spectroscopy enabled by photomixing is a promising high precision spectroscopic tool for the examination of a wide variety of samples including biological, chemical, and solid state. However, often it would be of interest to examine isolated samples free from bulk effects that broaden spectral features. In this form samples with low concentrations of absorbers have a reduced cross section making coupling to an external driving field a challenge. By utilising THz metamaterials one can borrow the concepts of surface enhanced Raman spectroscopy to confine and concen…
Brunel harmonics appear in the optical response of an atom in process of laser-induced ionization, when the electron leaves the atom and is accelerated in the strong optical field. In contrast to recollision-based harmonics, the Brunel mechanism does not require the electron returning to the core. Here we show that in the presence of a strong ionizing terahertz (THz) field, even a weak driving field at the optical frequencies allow for generating Brunel harmonics effectively. The strong ionizing THz pump suppresses recollisions, making Brunel dominant in a wide spectral range. High-order Brune…
This article presents the design of two dual-band graphene-based absorbers for terahertz frequencies. The absorbers are composed of two-dimensional (2D)arrays of ribbons and disks printed on a ground plane backed dielectric spacer. The design is based on the excitation of a specific plasmon polariton of the graphene patterned array at each resonance band. An analytical circuit model is used to derive closed-form relations for the geometrical parameters of the absorber and graphene parameters. The graphene patterned array appears as a surface admittance made of an infinite parallel array of ser…
We propose a thin, compact, broadband, polarization and angle insensitive metamaterial absorber based on a tungsten reflector, silicon spacer and a top pattern composed of a double square-like ring resonator utilizing nickel(Ni). In such a structure, a high absorption (above 80 %) bandwidth ~ 4.8 μm from 3.52 up to 8.32 μm corresponding to the relative bandwidth ~81% can be achieved with deeply subwavelength unit cell dimensions. Here the physical origin of the broadband absorption is associated with low Q-factor dipole modes of the top pattern inner and outer sides functioning as rectangular …
The implementation of terahertz (THz) wafer-level metadevices is critical to advance the science for applications including (I) integrated focal plane array which can image for biology and (II) integrated narrowband absorbers for high spectral resolution THz spectroscopy. Substantial progress has been made in the development of THz metamaterials; however, a wafer-level low-stress THz metadevices platform remains a challenge. This paper experimentally demonstrates a substrate-free THz metadevices platform adopting engineered Si-rich and low-stress silicon nitride (SiNx) thin films, achieving an…
We demonstrate photoacoustic wave propagation with a plane wavefront in liquid water using a terahertz (THz) laser pulse. The THz light can effectively generate the photoacoustic wave in water because of strong absorption via a stretching vibration mode of the hydrogen bonding network. The excitation of a large-area water surface irradiated by loosely focused THz light produces a plane photoacoustic wave. This is in contrast with conventional methods using absorbers or plasma generation using near-infrared laser light. The photoacoustic wave generation and plane wave propagation are observed u…
Coherent perfect absorber (CPA) was proposed as the time-reversed counterpart to laser: a resonator containing lossy medium instead of gain medium can absorb the coherent optical fields completely. Here, we exploit a monolayer graphene to realize the CPA in a non-resonant manner. It is found that quasi-CPA point exists in the terahertz regime for suspending monolayer graphene, and the CPA can be implemented with the assistant of proper phase modulation among two incident beams at the quasi-CPA frequencies. The graphene based CPA is found of broadband angular selectivity: CPA point splits into …
We present an asymmetric bifacial graphene metasurface to realize tunable and broadband coherent perfect absorption (CPA) at terahertz (THz) frequencies. The proposed design is composed of two dissimilar graphene square patch metasurfaces stacked over an ultrathin dielectric substrate. Nonlinear CPA performance without resorting to optical nonlinearities and amplification are demonstrated based on wave interference phenomena taking place along and inside this subwavelength structure. Broadband asymmetric reflection from opposite directions is obtained in the case of single wave illumination. T…
In this paper, we proposed a theoretical model in the far-infrared and terahertz (THz) bands, which is a dumbbell-shaped graphene metamaterial arrays with a combination of graphene nanorod and two semisphere-suspended heads. We report a detailed theoretical investigation on how to enhance localized electric field and the absorption in the dumbbell-shaped graphene metamaterial arrays. The simulation results show that by changing the geometrical parameters of the structure and the Fermi level of graphene, we can change the absorption characteristics. Furthermore, we have discovered that the reso…
High input intensities are usually required to efficiently excite optical nonlinear effects in ultrathin structures. This problem is particularly critical at terahertz (THz) frequencies because high input power THz sources are not available. The demonstration of enhanced nonlinear effects at THz frequencies is particularly important since these nonlinear mechanisms promise to play a significant role in the development and design of new reconfigurable planar THz nonlinear devices. In this work, we present a novel class of ultrathin nonlinear hybrid planar THz devices based on graphene-covered p…
In this work, a metamaterial selective solar absorber made of nanostructured titanium gratings deposited on an ultrathin MgF2 spacer and a tungsten ground film is proposed and experimentally demonstrated. Normal absorptance of the fabricated solar absorber is characterized to be higher than 90% in the UV, visible and, near infrared (IR) regime, while the mid-IR emittance is around 20%. The high broadband absorption in the solar spectrum is realized by the excitation of surface plasmon and magnetic polariton resonances, while the low mid-IR emittance is due to the highly reflective nature of th…
The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersubband gain medium, self-lock the optical modes in phase, allowing stable comb operation, albeit over a restricted dynamic range (~ 20% of the laser operational range). Here, we engineer miniaturized T…
Moderate-terahertz-induced plateau expansion of high-order harmonic generation to soft X-ray region
Duy Tan University（越南科技大学）；Van Lang University（文郎大学）；Ton Duc Thang University（胡志明市铁城大学）；Ho Chi Minh City University of Education（胡志明市教育大学）；M. V. Lomonosov Moscow State University（莫斯科国立罗蒙诺索夫大学）
Antireflection or impedance matching is a topic that has been extensively researched by the optical and microwave communities over the past century and until today. However, due to the diverging wave impedances of TE (s) and TM (p) polarizations with increasing incident angle, it is impossible to achieve perfect matching simultaneously for both polarizations at an oblique incident angle with a single conventional matching layer. In this paper, we show that simultaneous perfecting matching of an arbitrary substrate at an arbitrary incident angle from air is possible with a single uniaxial metam…
Metasurfaces are engineered thin surfaces comprising two dimensional (2D) arrays of sub-wavelength spaced and sub-wavelength sized resonators. Metasurfaces can locally manipulate the amplitude, phase and polarization of light with high spatial resolution. In this study, we report numerical and experimental results of a vortex-beam-generating metasurface fabricated specifically for infrared (IR) and terahertz (THz) wavelengths. The designed metasurface consisted of a 2D array of dielectric cross-shaped resonators with spatially varying length, thereby providing desired spatially varying phase s…
