In the wide world of 2D materials, hexagonal boron nitride (hBN) holds a special place due to its excellent characteristics. In addition to its thermal, chemical and mechanical stability, hBN demonstrates high thermal conductivity, low compressibility, and wide band gap around 6 eV, making it promising candidate for many groundbreaking applications and more specifically for optoelectronic devices. Millimeters scale hexagonal boron nitride crystals are obtained through a disruptive dual method (PDC/PCS) consisting in a complementary coupling of the Polymer Derived Ceramics route and a Pressure-Controlled Sintering process. In addition to their excellent chemical and crystalline quality, these crystals exhibit a free exciton lifetime of 0.43 ns, as determined by time-resolved cathodoluminescence measurements, confirming their interesting optical properties. To go further in applicative fields, hBN crystals are then exfoliated, and resulting Boron Nitride NanoSheets (BNNSs) are used to encapsulate transition metal dichalcogenides (TMDs). Such van der Waals heterostructures are tested by optical spectroscopy. BNNSs do not luminesce in the emission spectral range of TMDs and the photoluminescence width of the exciton at 4K is in the range 2-3 meV. All these results demonstrate that these BNNSs are relevant for future opto-electronic applications.
Semiconductor InSb nanosheet/hexagonal boron nitride (hBN)/graphite trilayers are fabricated, and single- and double-gate devices made from the trilayers are realized and characterized. The InSb nanosheets employed in the trilayer devices are epitaxially grown, free-standing, zincblende crystals and are in micrometer lateral sizes. The hBN and graphite flakes are obtained by exfoliation. Each trilayer is made by successively stacking an InSb nanosheet on an hBN flake and on a graphite flake using a home-made alignment stacking/transfer setup. The fabricated single- and double-gate devices are …
Non-toxicity and stability make two-dimensional (2D) bismuth halide perovskites better alternatives to lead-based ones for optoelectronic applications and catalysis. In this work, we synthesize sub-micron size colloidal quasi-2D Cs3Bi2I9 perovskite nanosheets and study their generation and relaxation of charge carriers. Steady-state absorption spectroscopy reveals an indirect bandgap of 2.07 eV, which is supported by the density functional theory calculated band structure. The nanosheets do not show detectable photoluminescence at room temperature at band-edge excitation which is attributed to…
Due to miniaturization of device dimensions, the next generations photodetector based devices are expected to be fabricated from robust nanostructured materials. Hence there is an utmost requirement of investigating exotic optoelectronic properties of nanodevices fabricated from new novel materials and testing their performances at harsh conditions. The recent advances on 2D layered materials indicate exciting progress on broad spectral photodetection (BSP) but still there is a great demand for fabricating ultra-high performance photodetectors made from single material sensing broad electromag…
Selenium has attracted intensive attention as a promising material candidate for future optoelectronic applications. However, selenium has a strong tendency to grow into nanowire forms due to its anisotropic atomic structure, which has largely hindered the exploration of its potential applications. In this work, using a physical vapor deposition method, we have demonstrated the synthesis of large-size, high-quality 2D selenium nanosheets, the minimum thickness of which could be as thin as 5 nm. The Se nanosheet exhibits a strong in-plane anisotropic property, which is determined by angle-resol…
Nanopores in 2D materials are highly desirable for DNA sequencing, yet achieving single-stranded DNA (ssDNA) transport through them is challenging. Using density functional theory calculations and molecular dynamics simulations we show that ssDNA transport through a pore in monolayer hexagonal boron nitride (hBN) is marked by a basic nanomechanical conflict. It arises from the notably inhomogeneous flexural rigidity of ssDNA and causes high friction $\textit{via}$ transient DNA desorption costs exacerbated by solvation effects. For a similarly sized pore in bilayer hBN, its self-passivated ato…
Colloidal materials of tin(II) sulfide (SnS), as a layered semiconductor with a narrow band gap, are emerging as a potential alternative to the more toxic metal chalcogenides (PbS, PbSe, CdS, CdSe) for various applications such as electronic and optoelectronic devices. We describe a new and simple pathway to produce colloidal SnS nanosheets with large lateral sizes and controllable thickness, as well as single-crystallinity. The synthesis of the nanosheets is achieved by employing tin(II) acetate as tin precursor instead of harmful precursors such as bis[bis(trimethylsilyl)amino] tin(II) and h…
First-principles discovery of stable, anisotropic, semiconducting Sb2X2O (X = S, Se) and Janus Sb2SSeO nanosheets for optoelectronics and photocatalysis
TiS3 nanosheets have proven to be promising candidates for ultrathin optoelectronic devices due to their direct narrow band-gap and the strong light-matter interaction. In addition, the marked in-plane anisotropy of TiS3 is appealing for the fabrication of polarization sensitive optoelectronic devices. Herein, we study the optical contrast of TiS3 nanosheets of variable thickness on SiO2/Si substrates, from which we obtain the complex refractive index in the visible spectrum. We find that TiS3 exhibits very large birefringence, larger than that of well-known strong birefringent materials like …
Inorganic lead halide perovskites are promising candidates for optoelectronic applications, due to their bandgap tunability, high photoluminescence quantum yield, and narrow emission line widths. In particular, they offer the possibility to vary the bandgap as a function of the halide composition and dimension/shape of the crystals at the nanoscale. Here we present an aberration-corrected scanning transmission microscopy (STEM) study of extended nanosheets of CsPbBr3 directly demonstrating their orthorhombic crystal structure and their lateral termination with Cs-Br planes. The bandgaps from i…
Solution-processable two-dimensional (2D) semiconductors with chemically tunable thickness and associated tunable band gaps are highly promising materials for ultrathin optoelectronics. Here, the properties of free charge carriers and excitons in 2D PbS nanosheets of different thickness are investigated by means of optical pump-terahertz probe spectroscopy. By analyzing the frequency-dependent THz response, a large quantum yield of excitons is found. The scattering time of free charge carriers increases with nanosheet thickness, which is ascribed to reduced effects of surface defects and ligan…
The compressive strain induced work function modulation in boron nitride nanosheets (BNNS) has been studied. The compressive strain arose due to the irradiation of 30 keV Au beam on thin films of BNNS. Before irradiation BNNS was characterized by Raman spectroscopy, UV-Vis spectroscopy, where using Tauc plot the bandgap of chemically synthesized BNNS from commercial hBN powder has been calculated as well as the layer numbers on thin films also quantified using an empirical relation exploiting the full width at half maxima (FWHM) of Raman peak of BNNS. The Scanning Electron Microscopy (SEM) ima…
Hexagonal boron nitride (h-BN) and graphite are structurally similar but with very different properties. Their combination in graphene-based devices meets now a huge research focus, and it becomes particularly important to evaluate the role played by crystalline defects in them. In this work, the cathodoluminescence (CL) properties of hexagonal boron nitride crystallites are reported and compared to those of nanosheets mechanically exfoliated from them. First the link between the presence of structural defects and the recombination intensity of bound-excitons, the so-called D series, is confir…
Hexagonal boron nitride (hBN) is attracting a lot of attention in the last years, thanks to its many remarkable properties. These include the presence of single-photon emitters with superior optical properties, which make it an ideal candidate for a plethora of photonic technologies. However, despite the large number of experimental results and theoretical calculations, the structure of the defects responsible for the observed emission is still under debate. In this work, we visualize individual atomic-scale defects in hBN with atomic force microscopy under ambient conditions and observe multi…
Two-dimensional group III monochalcogenides have recently attracted quite attention for their wide spectrum of optical and electric properties, being promising candidates for optoelectronic and novel electrical applications, however in their pristine form they are very sensitive and vulnerable to oxygen in air. Here we present two newly designed vdW heterostructures based on hBN (hexagonal boron nitride) and GaTe or InTe monolayer. Using density functional theory we investigate electronic and optical properties of those structures. Their moderate band gap and an good absorption coefficient mak…
Hexagonal boron nitride (hBN)-long-known as a thermally stable ceramic-is now available as atomically smooth, single-crystalline flakes, revolutionizing its use in optoelectronics. For nanophotonics, these flakes offer strong nonlinearities, hyperbolic dispersion, and single-photon emission, providing unique properties for optical and quantum-optical applications. For nanoelectronics, their pristine surfaces, chemical stability, and wide bandgap have made them the key substrate, encapsulant, and gate dielectric for two-dimensional electronic devices. However, while exploring these advantages, …
Atom-layered hexagonal boron nitride (hBN), with excellent stability, flat surface and large bandgap, has been reported to be the best 2D insulator to open up the great possibilities for exciting potential applications in electronics, optoelectronics and photovoltaics. The ability to grow high-quality large single crystals of hBN is at the heart for those applications, but the size of single-crystal 2D BN is less than a millimetre till now. Here, we report the first epitaxial growth of a 10*10 cm2 single-crystal hBN monolayer on a low symmetry Cu(110) "vicinal surface". The growth kinetics, un…
Graphene/hBN heterostructures can be considered as one of the basic building blocks for the next-generation optoelectronics mostly owing to the record-high electron mobilities. However, currently, the studies of the intrinsic optical properties of graphene are limited to the standard substrates (SiO2/Si, glass, quartz) despite the growing interest in graphene/hBN heterostructures. This can be attributed to a challenging task of the determination of hBN's strongly anisotropic dielectric tensor in the total optical response. In this study, we overcome this issue through imaging spectroscopic ell…
Microcavity exciton-polaritons are two-dimensional bosonic quasiparticles composed by excitons and photons. Using model Hamiltonian with parameters generated from ab initio density-functional theory and Bathe-Salpeter Equation calculations, we investigate the exciton and the exciton-polariton properties of hexagnonal boron nitride (hBN) based microcavity. We show that hBN based microcavities, including monolayer and all-dielectric ones, are promising in optoelectronic applications. Room temperature exciton-polariton Bose-Einstein Condensation can be achieved because of the large oscillating st…
Magnetic layered ternary chalcogenides hold great promise for future spin-optoelectronic devices in the two dimensional limit. Understanding how the properties of the materials are impacted by magnetic ordering and the spin-orbit interactions is critically needed information for the development of applications. Ultrafast transient reflectance (TR) and photocurrent (PC) spectroscopies are combined with ab initio density functional theory (DFT) calculations to investigate the band structure and photoresponse of a layered magnetic semiconductor CrSiTe3 (CST) nanosheet in the paramagnetic (PM, 300…
We perform the first-principles many-body GW and Bethe-Salpeter equation (BSE) calculations on the two-dimensional hexagonal boron nitride (2D-hBN) to explore the effects of opposite atoms on the electronic structure and linear one-photon absorption (OPA). Five AA- and AB-stacked bilayer and eight AAB-stacked trilayer structures are considered. The AAB-stacked trilayer hBN (TL-BN) structures are constructed by mixing the AA- and AB-stacked bilayer hBN (BL-BN). We show that the GW approximation gives rise to different types (i.e., indirect or direct) of fundamental band gaps from the independen…
Displacement-Field-Induced Ionization of Defect States in High-Quality hBN
National University of Singapore（新加坡国立大学）；Institute for Functional Intelligent Materials, National University of Singapore（新加坡国立大学功能智能材料研究所）；University of Manchester（曼彻斯特大学）；National Graphene Institute, University of Manchester（曼彻斯特大学国家石墨烯研究所）；University of Southampton（南安普顿大学）；National Institute for Materials Science（日本物质材料研究机构）
Nonlinear light-matter interactions in structured materials are the source of exciting properties and enable vanguard applications in photonics. However, the magnitude of nonlinear effects is generally small, thus requiring high optical intensities for their manifestation at the nanoscale. Here, we reveal a large nonlinear response of monolayer hexagonal boron nitride (hBN) in the mid-infrared phonon-polariton region, triggered by the strongly anharmonic potential associated with atomic vibrations in this material. We present robust first-principles theory predicting a threshold light field $\…
Naturally occurring van der Waals crystals have brought unprecedented interest to nanomaterial researchers in recent years. So far, more than 1800 layered materials (LMs) have been identified but only a few insulating and naturally occurring LMs were deeply investigated. Phyllosilicate minerals, which are a class of natural and abundant LMs, have been recently considered as a low-cost source of insulating nanomaterials. Within this family an almost barely explored material emerges: phlogopite [KMg3(AlSi3)O10(OH)2]. Here we carry out a high throughput characterization of this LM by employing se…
Heterostructures made from van der Waals materials provide a template to investigate proximity effects at atomically sharp heterointerfaces. In particular, near-field charge and energy transfer in heterostructures made from semiconducting transition metal dichalcogenides (TMD) have attracted interest to design model 2D "donor-acceptor" systems and new optoelectronic components. Here, using of Raman scattering and photoluminescence spectroscopies, we report a comprehensive characterization of a molybedenum diselenide (MoSe$_2$) monolayer deposited onto hexagonal boron nitride (hBN) and capped b…
Chemical vapor deposition (CVD) allows lateral edge epitaxy of transition metal dichalcogenide heterostructures with potential applications in optoelectronics. Critical for carrier and exciton transport is the quality of the two materials that constitute the monolayer and the nature of the lateral heterojunction. Important details of the optical properties were inaccessible in as-grown heterostructure samples due to large inhomogeneous broadening of the optical transitions. Here we perform optical spectroscopy at T = 4 K and also at 300 K to access the optical transitions in CVD grown MoSe2-WS…
