5G networks provide higher flexibility and improved performance compared to previous cellular technologies. This has raised expectations on the possibility to support advanced V2X services using the cellular network via Vehicle-to-Network (V2N) and V2N2V connections. Replacing direct V2V connections by V2N/V2N2V communications to support critical V2X services requires low V2N/V2N2V latencies. It is then necessary to quantify the latency values that V2N and V2N2V connections can achieve over 5G end-to-end (E2E) connections, but these depend on the particular 5G network deployments and configurations and to date the number of related studies is limited. This paper progresses the state-of-the-art by introducing a novel E2E latency model to quantify the latency of 5G V2N/V2N2V communications. The model includes the latency introduced at the radio, transport, core, Internet, peering points and application server (AS) for single MNO and multi-MNO scenarios. This paper estimates the E2E latency for a large variety of possible 5G network deployments that are being discussed or envisioned to support V2X services. This includes the possibility to deploy the V2X AS from the edge of the network to the cloud. The model is utilized to analyze the impact of different 5G network deployments and configurations on the E2E latency. The analysis helps identify which 5G network deployments and configurations are more suitable to meet V2X latency requirements. The conducted analysis highlights the challenge for centralized network deployments that locate the V2X AS at the cloud to meet the latency requirements of advanced V2X services. Locating the V2X AS closer to the cell edge reduces the latency. However, it requires a higher number of ASs and also a careful dimensioning of the network and its configuration to ensure sufficient network and AS resources are dedicated to serve the V2X traffic.
In this work, we consider latency in wireless networks, motivated by the need for reliable and low-latency wireless communication for applications such as vehicle-to-vehicle communication and industrial automation. The environment that these applications operate in is often highly dynamic, and, as a result, the wireless network technology used needs to be able to adapt to changing conditions, which makes mesh networking a good fit. Hence, in this work, we consider Thread and Bluetooth Mesh, two prominent mesh networking technologies. We measure one-way point-to-point latency using these techno…
We present a novel dual-DBA allocation, with a fast P4-enabled scheduler to provide low latency upstream grant allocations. We show latency reduction of 37% and 43%, respectively, compared to standard and virtual PONs
We present a heuristic algorithm for a PON upstream scheduling hypervisor,supporting low latency services with strict service-level agreement. The algorithm achieves near-optimal performance while running in only 3.5 us, thus operating in real-time.
The small cell market has been growing. To backhaul wireless traffic from small cells, the mobile network operators (MNOs) are looking into economically viable solutions, specifically the hybrid fiber coaxial networks (HFC), in addition to the traditional choice of fiber. When the latencies from both the wireless and the HFC networks are added together, it can result in noticeable end-to-end system latency, particularly under network congestion. If the two networks could somehow coordinate with each other, it would be possible to decrease the total system latency and increase system performanc…
This paper proposes a new approximation algorithm for the offline Virtual Network Embedding Problem (VNEP) with latency constraints. Given is a set of virtual networks with computational demands on nodes and bandwidth demands together with latency bounds on the edges. The VNEP's task is to feasibly embed a subset of virtual networks on a shared physical infrastructure, e.g., a data center, while maximizing the attained profit. In contrast to existing works, our approximation algorithm AFlex allows for (slight) violations of the latency constraints in order to greatly lower the runtime. To obta…
In this paper, we discuss latency reduction techniques for mobile backhaul over Data Over Cable Service Interface Specifications (DOCSIS) networks. When the latencies from both the wireless and the DOCSIS networks are added together, it can result in noticeable end-to-end system latency, particularly under network congestion. Previously, we proposed a method to improve upstream user-to-mobile core latency by coordinating the LTE and DOCSIS scheduling. The method reduces the impact on system latency from the DOCSIS network's request-grant-data loop, which is the main contributor of backhaul ups…
The mobile network operators (MNOs) are looking into economically viable backhaul solutions as alternatives to fiber, specifically the hybrid fiber coaxial networks (HFC). When the latencies from both the wireless and the HFC networks are added together, the result is a noticeable end-to-end system latency, particularly under network congestion. In order to decrease total system latency, we proposed a method to improve upstream user- to-mobile core latency by coordinating the LTE and HFC scheduling in previous papers. In this paper, we implement and optimize the proposed method on a custom LTE…
Most Internet traffic is carried by capacity-seeking protocols such as TCP and QUIC. Capacity-seeking protocols probe to find the maximum available throughput from sender to receiver, and, once they converge, attempt to keep sending traffic at this maximum rate. Achieving reliable low latency with capacity-seeking end-to-end methods is not yet entirely solved. We contribute a theoretical analysis to this ongoing discussion. In this work, we derive an expression for the minimum size of the spike in latency caused by a sudden drop in network capacity. Our results highlight a quantifiable and fun…
High performance rack-scale offerings package disaggregated pools of compute, memory and storage hardware in a single rack to run diverse workloads with varying requirements, including applications that need low and predictable latency. The intra-rack network is typically high speed Ethernet, which can suffer from congestion leading to packet drops and may not satisfy the stringent tail latency requirements for some workloads (including remote memory/storage accesses). In this paper, we design a Predictable Low Latency(PL2) network architecture for rack-scale systems with Ethernet as interconn…
In this paper, the routing in massive low earth orbit (LEO) satellite networks is studied. When the satellite-to-satellite communication distance is limited, we choose different relay satellites to minimize the latency in a constellation at a constant altitude. Firstly, the global optimum solution is obtained in the ideal scenario when there are available satellites at all the ideal locations. Next, we propose a nearest neighbor search algorithm for realistic (non-ideal) scenarios with a limited number of satellites. The proposed algorithm can approach the global optimum solution under an idea…
Ultra Reliable Low Latency Communications (URLLC) is an important challenge for the next generation wireless networks, which poses very strict requirements to the delay and packet loss ratio. Satisfaction is hardly possible without introducing additional functionality to the existing communication technologies. In the paper, we propose and study an approach to enable URLLC in Wi-Fi networks by exploiting an additional radio similar to that of IEEE 802.11ba. With extensive simulation, we show that our approach allows decreasing the delay by orders of magnitude, while the throughput of non-URLLC…
Network latency distributions, their algebra, and use examples. This paper considers modeling of capacity-insensitive processes and distributed systems. It provides algebraic properties of the latency distribution algebra and Haskell code to implement the model.
During the COVID-19 pandemic the Comcast network performed well in response to unprecedented changes in Internet usage and video communications applications that are sensitive to network latency have exploded in popularity. However, in today's typical networks-such as a home network-those applications often degrade if they are sharing a network link with other network traffic. This is a problem caused by a network design flaw often described using the term 'buffer bloat'. Several years ago, Comcast helped to fund research and development in the technical community into new Active Queue Managem…
Network Functions Virtualization (NFV) and Multi-access Edge Computing (MEC) play crucial roles in 5G networks for dynamically provisioning diverse communication services with heterogeneous service requirements. In particular, while NFV improves flexibility and scalability by softwarizing physical network functions as Virtual Network Functions (VNFs), MEC enables to provide delay-sensitive/time-critical services by moving computing facilities to the network edge. However, these new paradigms introduce challenges in terms of latency, availability, and resource allocation. In this paper, we firs…
This paper puts forth a networking paradigm, referred to as just-in-time (JIT) communication, to support client-server applications with stringent request-response latency requirement. Of interest is not just the round-trip delay of the network, but the actual request-response latency experienced by the application. The JIT framework contains two salient features. At the client side, the communication layer will 'pull' a request from the client just when there is an upcoming transmission opportunity from the network. This ensures that the request contains information that is as fresh as possib…
We report the automated deployment of 5G services across a latency-aware, semidisaggregated, and virtualized metro network. We summarize the key findings in a detailed analysis of end-to-end latency, service setup time, and soft-failure detection time.
Latency Aware Drone Base Station Placement in Heterogeneous Networks
与传统的静态小小区不同，无人机基站（Drone Base Stations，DBS）具有自身的优势，即，部署速度更快，成本更低，配置更灵活，而且由于存在短程视距链接，可能有更好的通信渠道。因此，将DBS应用到蜂窝网络中对于增加网络的吞吐量和改善移动用户（MU）的服务质量（QoS）具有很大的潜力。在本文中，我们专注于如何放置DBS（即，联合确定DBS的位置和关联覆盖），以便通过考虑DBS的能量容量限制，在最小化MU的总平均等待时间比率方面提高QoS。我们将DBS布局问题转化为一个优化问题，并设计了一个时延感知的无人机基站布局（LEAP）算法来有效地解决这个问题。LEAP的性能是通过模拟证明与其他两个基线方法相比。
The wireless communications landscape is anticipated to offer new service levels following the introduction of the millimeter-wave (mmWave) spectrum to consumer electronics. With their broad bandwidths and corresponding multi-Gbps data rates, these mmWaves are a perfect fit for data hungry applications, such as streaming video to extended reality devices. However, the latter are also bound by maximal latency constraints as low as 1 ms. Understanding where such minuscule time delays lurk requires a close-up study of individual layers in the network stack. Starting from the bottom up, the presen…
Communication latency has become one of the determining factors for the performance of parallel clusters. To design low-latency network topologies for high-performance computing clusters, we optimize the diameters, mean path lengths, and bisection widths of circulant topologies. We obtain a series of optimal circulant topologies of size $2^5$ through $2^{10}$ and compare them with torus and hypercube of the same sizes and degrees. We further benchmark on a broad variety of applications including effective bandwidth, FFTE, Graph 500 and NAS parallel benchmarks to compare the optimal circulant t…
Modern manufacturers are currently undertaking the integration of novel digital technologies - such as 5G-based wireless networks, the Internet of Things (IoT), and cloud computing - to elevate their production process to a brand new level, the level of smart factories. In the setting of a modern smart factory, time-critical applications are increasingly important to facilitate efficient and safe production. However, these applications suffer from delays in data transmission and processing due to the high density of wireless sensors and the large volumes of data that they generate. As the adve…
Ultra-low end-to-end latency is one of the most important requirements in 5G networks and beyond to support latency-critical applications. Cloud-RAN and MEC are considered as the key driving technology that can help reduce end-to-end latency. However, the use of MEC nodes poses radical changes to the access network architecture. As it brings the processing and the networking services closer to the edge, it often requires network functions (for example, the CU/DU stack and the application processing) to be distributed across different MEC sites. Therefore, a novel transport mechanism is needed …
Along with the increasing demand for latencysensitive services and applications, Deterministic Network (DetNet) concept has been recently proposed to investigate deterministic latency assurance for services featured with bounded latency requirements in 5G edge networks. The Network Function Virtualization (NFV) technology enables Internet Service Providers (ISPs) to flexibly place Virtual Network Functions (VNFs) achieving performance and cost benefits. Then, Service Function Chains (SFC) are formed by steering traffic through a series of VNF instances in a predefined order. Moreover, the requ…
The H2020 METRO-HAUL European project has architected a latency-aware, cost-effective, agile, and programmable optical metro network. This includes the design of semidisaggregated metro nodes with compute and storage capabilities, which interface effectively with both 5G access and multi-Tbit/s elastic optical networks in the core. In this paper, we report the automated deployment of 5G services, in particular, a public safety video surveillance use case employing low-latency object detection and tracking using on-camera and on-the-edge analytics. The demonstration features flexible deployment…
