Ultra Reliable Low Latency Communications (URLLC) is an important challenge for the next generation wireless networks, which poses very strict requirements to the delay and packet loss ratio. Satisfaction is hardly possible without introducing additional functionality to the existing communication technologies. In the paper, we propose and study an approach to enable URLLC in Wi-Fi networks by exploiting an additional radio similar to that of IEEE 802.11ba. With extensive simulation, we show that our approach allows decreasing the delay by orders of magnitude, while the throughput of non-URLLC devices is reduced insignificantly.
We propose a virtual-PON based Mobile Fronthaul (MFH) architecture that allows direct communications between edge points (enabling EAST-WEST communication). Dynamic slicing improves service multiplexing while supporting ultra-low latency under 100$μ$s between cells and MEC nodes.
We propose a mechanism to support URLLC Open-RAN ultra-low latency over a MESH-PON, serving dense deployment of small cell and MEC nodes in an access network. We show the possibility, under given assumptions, to achieve application-to-application end-to-end latency below 1ms.
Heterogeneous network (HetNet) is a key enabler to largely boost network coverage and capacity in the forthcoming fifth-generation (5G) and beyond. To support the explosively growing mobile data volumes, wireless communications with millimeter-wave (mm-wave) radios have attracted massive attention, which is widely considered as a promising candidate in 5G HetNets. In this article, we give an overview on the end-to-end latency of HetNets with mm-wave communications. In general, it is rather challenging for formulating and optimizing the delay problem with buffers in mm-wave communications, sinc…
Autonomous vehicles are expected to emerge as a main trend in vehicle development over the next decade. To support autonomous vehicles, ultra-reliable low-latency communications (URLLC) is required between autonomous vehicles and infrastructure networks, e.g., fifth generation (5G) cellular networks. Hence, reliability and latency must be jointly investigated in 5G autonomous vehicular networks. Utilizing the Euclidean norm theory, we first propose a reliability and latency joint function to evaluate the joint impact of reliability and latency in 5G autonomous vehicular networks. The interacti…
We use random linear network coding (RLNC) based scheme for multipath communication in the presence of lossy links with different delay characteristics to obtain ultra-reliability and low latency. A sliding window version of RLNC is proposed where the coded packets are generated using packets in a window size and are inserted among systematic packets in different paths. The packets are scheduled in the paths in a round robin fashion proportional to the data rates. We use finite encoding and decoding window size and do not rely on feedback for closing the sliding window, unlike the previous wor…
Cellular Vehicle-to-Everything (C-V2X) technology promises to provide ultra-reliable low latency communication (URLLC) framework for connected vehicles. Connected vehicles can help us improve traffic safety, congestion and reduce fatal accidents. C-V2X promises new levels of connectivity and intelligence providing numerous features like infotainment, always-on telematics, real-time navigation, etc. with heterogeneous network architecture. C-V2X leverages existing cellular architecture and is on the way to replace DSRC/WAVE for vehicular communication. There are still some challenges which need…
Uplink configured Grant allocation has been introduced in 3rd Generation Partnership Project New Radio Release 15. This is beneficial in supporting Ultra-Reliable and Low Latency Communication for industrial communication, a key Fifth Generation mobile communication usage scenario. This scheduling mechanism enables a user with periodic traffic to transmits its data readily and bypasses the control signaling entailed to scheduling requests and scheduling grants and provides low latency access. To facilitate ultra-reliable communication, the scheduling mechanism can allow users to transmit conse…
In order to create cooperating swarms of Unmanned Autonomous Vehicles (UAVs) that also interact with various other systems and devices, open and free communication systems are mandatory. This paper presents an implementation of such a communication system to incorporate the Crazyflie nano-drone as a UAV platform. The protocol stack leverages the open Predictably Reliable Real-time Transport (PRRT) protocol that adds latency-awareness and -predictability to stacks composed of standard Internet protocols. To enable the drone to receive and reply to control commands via Wi-Fi, it has been extende…
Configured Grant-based allocation has been adopted in New Radio 3rd Generation Partnership Project Release 16. This scheme is beneficial in supporting Ultra-Reliable and Low Latency Communication for industrial communication, a key Fifth Generation mobile communication usage scenario. This scheduling mechanism enables a user with a periodic traffic to transmit its data readily and bypasses the signaling entailed to scheduling requests and scheduling grants; and provides low latency access. To facilitate ultra-reliable communication, the scheduling mechanism can allow the user to transmit redun…
Grant-free non-orthogonal multiple access (NOMA) has been regarded as a key-enabler technology for ultra-reliable and low-latency communications (URLLC). In this paper, we analyse the performance of NOMA with short packet communications for URLLC. In this regard, the overall packet loss probability consists of transmission error probability and queueing-delay violation probability. Queueing-delay has been modelled using the effective bandwidth. Due to short transmission time, the infinite block-length has been replaced with finite blocklength of the channel codes which rules out the applicatio…
As wearable devices become more ingrained in our daily lives, traditional communication networks primarily designed for human being-oriented applications are facing tremendous challenges. The upcoming 5G wireless system aims to support unprecedented high capacity, low latency, and massive connectivity. In this article, we evaluate key challenges in wearable communications. A cloud/edge communication architecture that integrates the cloud radio access network, software defined network, device to device communications, and cloud/edge technologies is presented. Computation offloading enabled by t…
Ultra-low latency supported by the fifth generation (5G) give impetus to the prosperity of many wireless network applications, such as autonomous driving, robotics, telepresence, virtual reality and so on. Ultra-low latency is not achieved in a moment, but requires long-term evolution of network structure and key enabling communication technologies. In this paper, we provide an evolutionary overview of low latency in mobile communication systems, including two different evolutionary perspectives: 1) network architecture; 2) physical layer air interface technologies. We firstly describe in deta…
Industry-led initiatives such as the Next G Alliance (NGA) are currently considering how to dimension the spectrum required to support new classes of services envisioned beyond 5G. In particular, support for URLLC brings the challenge of how to dimension stochastic wireless networks to meet stringent reliability and latency requirements. Our analysis indicates that the bandwidth needed to meet URLLC goals can be in the order of gigahertz, beyond what is available in today's mobile networks. Network densification can ease those bandwidth needs but requires new deployment strategies involving su…
Multi-connectivity (MC) with packet duplication, where the same data packet is duplicated and transmitted from multiple transmitters, is proposed in 5G New Radio as a reliability enhancement feature. However, it is found to be resource inefficient, since radio resources from more than one transmitters are required to serve a single user. Improving the performance enhancement vs. resource utilization tradeoff with MC is therefore a key design challenge. This work proposes a heuristic resource efficient latency-aware dynamic MC algorithm which activates MC selectively such that its benefits are …
In this work, we consider latency in wireless networks, motivated by the need for reliable and low-latency wireless communication for applications such as vehicle-to-vehicle communication and industrial automation. The environment that these applications operate in is often highly dynamic, and, as a result, the wireless network technology used needs to be able to adapt to changing conditions, which makes mesh networking a good fit. Hence, in this work, we consider Thread and Bluetooth Mesh, two prominent mesh networking technologies. We measure one-way point-to-point latency using these techno…
Wireless Virtual Reality (VR) and Augmented Reality (AR) will contribute to people increasingly working and socializing remotely. However, the VR/AR experience is very susceptible to various delays and timing discrepancies, which can lead to motion sickness and discomfort. This paper models and exploits the existence of multiple paths and redundancy to improve the timing performance of wireless VR communications. We consider Multiple Description Coding (MDC), a scheme where the video stream is encoded in Q streams (Q = 2 in this paper) known as descriptors and delivered independently over mult…
Communication latency has become one of the determining factors for the performance of parallel clusters. To design low-latency network topologies for high-performance computing clusters, we optimize the diameters, mean path lengths, and bisection widths of circulant topologies. We obtain a series of optimal circulant topologies of size $2^5$ through $2^{10}$ and compare them with torus and hypercube of the same sizes and degrees. We further benchmark on a broad variety of applications including effective bandwidth, FFTE, Graph 500 and NAS parallel benchmarks to compare the optimal circulant t…
In addition to autonomous car operation, in many cases it is desirable to let a human drive the vehicle remotely. To make remote operation possible, it is very critical to have a low and predictable latency to transmit video from the car cameras and receive control commands back. In this paper, we analyze the problem and present a communication and video streaming system that addresses the latency challenges and enables teleoperation of a real car over commercially available LTE network; demonstrating sub-50ms roundtrip latencies for 720p, 60FPS video, with average PSNR 36db.
5G new radio is envisioned to support three major service classes: enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine type communications. Emerging URLLC services require up to one millisecond of communication latency with 99.999% success probability. Though, there is a fundamental trade-off between system spectral efficiency (SE) and achievable latency. This calls for novel scheduling protocols which cross-optimize system performance on user-centric; instead of network-centric basis. In this paper, we develop a joint multi-user preemptive …
In many scenarios, low latency wireless communication assumes two-way connection, such that the node that receives information can swiftly send acknowledgment or other response. In this paper, we address the problem of low latency two-way communication and address it through proposal of a base station (BS) cooperation scheme. The scheme is based on downlink (DL) and uplink (UL) decoupled access (DUDA). To the best of our knowledge, this is the first time that the idea of decoupled access is used to reduce latency. We derive the analytical expression for the average latency and verify that the …
High-fidelity, real-time interactive applications are envisioned with the emergence of the Internet of Things (IoT) and tactile Internet by means of ultra-reliable low-latency communications (URLLC). Exploiting time diversity for fulfilling the URLLC requirements in an energy efficient manner is a challenging task due to the nontrivial interplay among packet size, retransmission rounds and delay, and transmit power. In this paper, we study the fundamental energy-latency tradeoff in URLLC systems employing incremental redundancy (IR) hybrid automatic repeat request (HARQ). We cast the average e…
Kyoto University（京都大学）；Tokyo Institute of Technology（东京工业大学）；University of Oulu（奥卢大学）
The distributed inference (DI) framework has gained traction as a technique for real-time applications empowered by cutting-edge deep machine learning (ML) on resource-constrained Internet of things (IoT) devices. In DI, computational tasks are offloaded from the IoT device to the edge server via lossy IoT networks. However, generally, there is a communication system-level trade-off between communication latency and reliability; thus, to provide accurate DI results, a reliable and high-latency communication system is required to be adapted, which results in non-negligible end-to-end latency of…
Non-orthogonal multiple access (NOMA) in conjunction with finite blocklength (short packet) communications is regarded as an enabler for ultra-reliable and low-latency communications (URLLC). In this paper, we investigate the link-layer rate, i.e., the effective capacity, of a two-user NOMA in finite blocklength regime. The delay performance of the NOMA users is analyzed by taking into consideration the queueing delay violation probability and the transmission error probability. We further provide closed-form expressions for the individual effective capacity of the NOMA users in Rayleigh fadin…
The fifth generation (5G) of wireless systems holds the promise of supporting a wide range of services with different communication requirements. Ultra-reliable low-latency communications (URLLC) is a generic service that enables mission-critical applications, such as industrial automation, augmented reality, and vehicular communications. URLLC has stringent requirements for reliability and latency of delivering both data and control information. In order to meet these requirements, the Third Generation Partnership Project (3GPP) has been introducing new features to the upcoming releases of th…
While the current generation of mobile and fixed communication networks has been standardized for mobile broadband services, the next generation is driven by the vision of the Internet of Things and mission critical communication services requiring latency in the order of milliseconds or sub-milliseconds. However, these new stringent requirements have a large technical impact on the design of all layers of the communication protocol stack. The cross layer interactions are complex due to the multiple design principles and technologies that contribute to the layers' design and fundamental perfor…
Fifth generation new radio aims to facilitate new use cases in wireless communications. Some of these new use cases have highly de-manding latency requirements; many of the powerful forward error correction codes deployed in current systems, such as the turbo and low-density parity-check codes, do not perform well when the low-latency requirement does not allow iterative decoding. As such, there is a rejuvenated interest in noniterative/one-shot decoding algorithms. Motivated by this, we propose a signal-to-noise ratio-adaptive convolutionally coded system with optimized constellations designe…
Ultra-reliability and low-latency are pivotal requirements of the new 6th generation of communication systems (xURLLC). Over the past years, to increase throughput, adaptive active antennas were introduced in advanced wireless communications, specifically in the domain of millimeter-wave (mmWave). Consequently, new lower-layer techniques were proposed to cope with practical challenges of high dimensional and electronically-steerable beams. The transition from omni-directional to highly directional antennas presents a new type of wireless systems that deliver high bandwidth, but that are suscep…
In this paper, we consider a dense vehicular communication network where each vehicle broadcasts its safety information to its neighborhood in each transmission period. Such applications require low latency and high reliability, and thus, we propose a non-orthogonal multiple access scheme to reduce the latency and to improve the packet reception probability. In the proposed scheme, the BS performs the semi-persistent scheduling to optimize the time scheduling and allocate frequency resources in a non-orthogonal manner while the vehicles autonomously perform distributed power control. We formul…
The future connectivity landscape and, notably, the 5G wireless systems will feature Ultra-Reliable Low Latency Communication (URLLC). The coupling of high reliability and low latency requirements in URLLC use cases makes the wireless access design very challenging, in terms of both the protocol design and of the associated transmission techniques. This paper aims to provide a broad perspective on the fundamental tradeoffs in URLLC as well as the principles used in building access protocols. Two specific technologies are considered in the context of URLLC: massive MIMO and multi-connectivity, …
Designing distributed, fast and reliable wireless consensus protocols is instrumental in enabling mission-critical decentralized systems, such as robotic networks in the industrial Internet of Things (IIoT), drone swarms in rescue missions, and so forth. However, chasing both low-latency and reliability of consensus protocols is a challenging task. The problem is aggravated under wireless connectivity that may be slower and less reliable, compared to wired connections. To tackle this issue, we investigate fundamental relationships between consensus latency and reliability through the lens of w…
Ultra-reliable low latency communication (URLLC) is an important new feature brought by 5G, with a potential to support a vast set of applications that rely on mission-critical links. In this article, we first discuss the principles for supporting URLLC from the perspective of the traditional assumptions and models applied in communication/information theory. We then discuss how these principles are applied in various elements of the system design, such as use of various diversity sources, design of packets and access protocols. The important messages are that there is a need to optimize the t…
Chongqing University of Posts and Telecommunications（重庆邮电大学）；University of Guelph（圭尔夫大学）；Hubei University of Arts and Science（湖北文理学院）；Hosei University（法政大学）；RIKEN（理化学研究所）
Edge enabled Industrial Internet of Things (IIoT) platform is of great significance to accelerate the development of smart industry. However, with the dramatic increase in real-time IIoT applications, it is a great challenge to support fast response time, low latency, and efficient bandwidth utilization. To address this issue, Time Sensitive Network (TSN) is recently researched to realize low latency communication via deterministic scheduling. To the best of our knowledge, the combinability of multiple flows, which can significantly affect the scheduling performance, has never been systematica…
While the notion of age of information (AoI) has recently been proposed for analyzing ultra-reliable low-latency communications (URLLC), most of the existing works have focused on the average AoI measure. Designing a wireless network based on average AoI will fail to characterize the performance of URLLC systems, as it cannot account for extreme AoI events, occurring with very low probabilities. In contrast, this paper goes beyond the average AoI to improve URLLC in a vehicular communication network by characterizing and controlling the AoI tail distribution. In particular, the transmission po…
The future Internet promises to support time-sensitive services that require ultra low latencies and reliabilities of 99.99%. Recent advances in cellular and WiFi connections enhance the network to meet high reliability and ultra low latencies. However, the aforementioned services require that the server processing time ensures low latencies with high reliability, otherwise the end-to-end performance is not met. To that end, in this paper we use queuing theory to model the sojourn time distribution for Ultra-Reliable Low Latency Communication services of M/M/R-JSQ-PS systems: Markovian queues …
In vehicular communications, intracell interference and the stringent latency requirement are challenging issues. In this paper, a joint spectrum reuse and power allocation problem is formulated for hybrid vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications. Recognizing the high capacity and low-latency requirements for V2I and V2V links, respectively, we aim to maximize the weighted sum of the capacities and latency requirement. By decomposing the original problem into a classification subproblem and a regression sub-problem, a convolutional neural network (CNN) based …
In this paper, we study how to solve resource allocation problems in ultra-reliable and low-latency communications by unsupervised deep learning, which often yield functional optimization problems with quality-of-service (QoS) constraints. We take a joint power and bandwidth allocation problem as an example, which minimizes the total bandwidth required to guarantee the QoS of each user in terms of the delay bound and overall packet loss probability. The global optimal solution is found in a symmetric scenario. A neural network was introduced to find an approximated optimal solution in general …
