Ultra-low latency supported by the fifth generation (5G) give impetus to the prosperity of many wireless network applications, such as autonomous driving, robotics, telepresence, virtual reality and so on. Ultra-low latency is not achieved in a moment, but requires long-term evolution of network structure and key enabling communication technologies. In this paper, we provide an evolutionary overview of low latency in mobile communication systems, including two different evolutionary perspectives: 1) network architecture; 2) physical layer air interface technologies. We firstly describe in detail the evolution of communication network architecture from the second generation (2G) to 5G, highlighting the key points reducing latency. Moreover, we review the evolution of key enabling technologies in the physical layer from 2G to 5G, which is also aimed at reducing latency. We also discussed the challenges and future research directions for low latency in network architecture and physical layer.
Enabling ultra-reliable low latency communications (uRLLC) over 5G wireless networks creates challenging design requirements, particularly on the air-interface. The stringent latency and reliability targets require enhancements at different layers of the protocol stack. On the other hand, the parallel redundancy protocol (PRP), wherein each data packet is duplicated and transmitted concurrently over two independent networks, provides a simple solution for improving reliability and reducing latency in wireless networks. PRP can be realized in cellular networks through the dual connectivity (DC)…
There are many deep learning (e.g., DNN) powered mobile and wearable applications today continuously and unobtrusively sensing the ambient surroundings to enhance all aspects of human lives. To enable robust and private mobile sensing, DNN tends to be deployed locally on the resource-constrained mobile devices via model compression. The current practice either hand-crafted DNN compression techniques, i.e., for optimizing DNN-relative performance (e.g., parameter size), or on-demand DNN compression methods, i.e., for optimizing hardware-dependent metrics (e.g., latency), cannot be locally onlin…
Heterogeneous network (HetNet) is a key enabler to largely boost network coverage and capacity in the forthcoming fifth-generation (5G) and beyond. To support the explosively growing mobile data volumes, wireless communications with millimeter-wave (mm-wave) radios have attracted massive attention, which is widely considered as a promising candidate in 5G HetNets. In this article, we give an overview on the end-to-end latency of HetNets with mm-wave communications. In general, it is rather challenging for formulating and optimizing the delay problem with buffers in mm-wave communications, sinc…
The fifth generation (5G) wireless network technology is to be standardized by 2020, where main goals are to improve capacity, reliability, and energy efficiency, while reducing latency and massively increasing connection density. An integral part of 5G is the capability to transmit touch perception type real-time communication empowered by applicable robotics and haptics equipment at the network edge. In this regard, we need drastic changes in network architecture including core and radio access network (RAN) for achieving end-to-end latency on the order of 1 ms. In this paper, we present a d…
New Radio (NR) is a new radio air interface developed by the 3rd Generation Partnership Project (3GPP) for the fifth generation (5G) mobile communications system. With great flexibility, scalability, and efficiency, 5G is expected to address a wide range of use-cases including enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine type communications (mMTC). The physical downlink control channel (PDCCH) in NR carries Downlink Control Information (DCI). Understanding how PDCCH operates is key to developing a good understanding of how information…
Digital Twin (DT) is a promising technology for the new immersive digital life with a variety of applications in areas such as Industry 4.0, aviation, and healthcare. Proliferation of this technology requires higher data rates, reliability, resilience, and lower latency beyond what is currently offered by 5G. Thus, DT can become a major driver for 6G research and development. Alternatively, 6G network development can benefit from Digital Twin technology and its powerful features such as modularity and remote intelligence. Using DT, a 6G network (or some of its components) will have the opportu…
Future wireless services must be focused on improving the quality of life by enabling various applications, such as extended reality, brain-computer interaction, and healthcare. These applications have diverse performance requirements (e.g., user-defined quality of experience metrics, latency, and reliability) that are challenging to be fulfilled by existing wireless systems. To meet the diverse requirements of the emerging applications, the concept of a digital twin has been recently proposed. A digital twin uses a virtual representation along with security-related technologies (e.g., blockch…
The stringent requirements of a 1,000 times increase in data traffic and one millisecond round trip latency have made limiting the potentially tremendous ensuing energy consumption one of the most challenging problems for the design of the upcoming fifth-generation (5G) networks. To enable sustainable 5G networks, new technologies have been proposed to improve the system energy efficiency and alternative energy sources are introduced to reduce our dependence on traditional fossil fuels. In particular, various 5G techniques target the reduction of the energy consumption without sacrificing the …
The 5G wireless networks are potentially revolutionizing future technologies. The 5G technologies are expected to foresee demands of diverse vertical applications with diverse requirements including high traffic volume, massive connectivity, high quality of service, and low latency. To fulfill such requirements in 5G and beyond, new emerging technologies such as SDN, NFV, MEC, and CC are being deployed. However, these technologies raise several issues regarding transparency, decentralization, and reliability. Furthermore, 5G networks are expected to connect many heterogeneous devices and machi…
New radio (NR) is a new wireless access technology developed as part of the fifth-generation (5G) of mobile communications to support a wide range of services, devices, and deployments. NR features spectrum flexibility, ultra-lean design, forward compatibility, low latency support, and advanced antenna technologies. There has been excitement about NR, sometimes clouded by confusion. This article is an attempt to summarize and overview the key features of NR by debunking seven of the more popular myths and revealing what NR really is. The seven topics include spectrum, flexible waveform and mul…
Recent advances in programmable metasurfaces, also dubbed as reconfigurable intelligent surfaces (RISs), are envisioned to offer a paradigm shift from uncontrollable to fully tunable and customizable wireless propagation environments, enabling a plethora of new applications and technological trends. Therefore, in view of this cutting edge technological concept, we first review the architecture and electromagnetic waves manipulation functionalities of RISs. We then detail some of the recent advancements that have been made towards realizing these programmable functionalities in wireless communi…
The newly introduced ultra-reliable low latency communication service class in 5G New Radio depends on innovative low latency radio resource management solutions that can guarantee high reliability. Grant-free random access, where channel resources are accessed without undergoing assignment through a handshake process, is proposed in 5G New Radio as an important latency reducing solution. However, this comes at an increased likelihood of collisions resulting from uncontrolled channel access, when the same resources are preallocated to a group of users. Novel reliability enhancement techniques …
The 5th generation (5G) wireless access technology, known as new radio (NR), will address a variety of usage scenarios from enhanced mobile broadband to ultra-reliable low-latency communications to massive machine type communications. Key technology features include ultra-lean transmission, support for low latency, advanced antenna technologies, and spectrum flexibility including operation in high frequency bands and inter-working between high and low frequency bands. This article provides an overview of the essentials of the state of the art in 5G wireless technology represented by the 3GPP N…
University of Macau（澳门大学）；Future Network of Intelligence Institute（未来网络智能研究院）；The Chinese University of Hong Kong (Shenzhen)（香港中文大学（深圳））；Southeast University（东南大学）；Purple Mountain Laboratories（紫金山实验室）；University of New South Wales（新南威尔士大学）；University of Texas at Dallas（德克萨斯大学达拉斯分校）；Friedrich-Alexander-University Erlangen-Nurnberg（弗里德里希-亚历山大-埃尔朗根-纽伦堡大学）；University of California, Irvine（加州大学欧文分校）
Due to the advancements in cellular technologies and the dense deployment of cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the fifth-generation (5G) and beyond cellular networks is a promising solution to achieve safe UAV operation as well as enabling diversified applications with mission-specific payload data delivery. In particular, 5G networks need to support three typical usage scenarios, namely, enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine-type communications (mMTC). On the one hand, UAVs can be levera…
Wireless data aggregation (WDA), referring to aggregating data distributed at devices (e.g., sensors and smartphone), is a common operation in 5G-and-beyond machine-type communications to support Internet-of-Things (IoT), which lays the foundation for diversified applications such as distributed sensing, learning, and control. Conventional WDA techniques that are designed based on a separated-communication-and-computation principle encounter difficulty in accommodating the massive access under the limited radio resource and stringent latency constraints imposed by emerging applications (e.g, a…
Whilst the fifth-generation (5G) systems are being rolled out across the globe, researchers have turned their attention to the exploration of radical next-generation solutions. At this early evolutionary stage we survey five main research facets of this field, namely {\em Facet~1: next-generation architectures, spectrum and services, Facet~2: next-generation networking, Facet~3: Internet of Things (IoT), Facet~4: wireless positioning and sensing, as well as Facet~5: applications of deep learning in 6G networks.} In this paper, we have provided a critical appraisal of the literature of promisin…
