This work assesses Lagrangian droplet evaporation models frequently used in spray combustion simulations, with the purpose of identifying the influence of modeling decisions on the single droplet behavior. Besides more simplistic models, the evaluated strategies include a simple method to incorporate Stefan flow effects in the heat transfer (Bird's correction), a method to consider the interaction of Stefan flow with the heat and mass transfer films (Abramzon-Sirignano model), and a method to incorporate non-equilibrium thermodynamics (Langmuir-Knudsen model). The importance of each phenomena is quantified analytically and numerically under various conditions. Evaporation models ignoring Stefan flow are found to be invalid under the studied conditions. The Langmuir-Knudsen model is also deemed inadequate for high temperature evaporation, while Bird's correction and the Abramzon-Sirignano model are identified as the most relevant for numerical studies of spray combustion systems. Latter is the most elaborate model studied here, as it considers Reynolds number effects beyond the empirical correlation of Ranz and Marshall derived for low-transfer rates. Thus, the Abramzon-Sirignano model is identified as the state of the art alternative in the scope of this study.
Propagation of weakly stretched spherical flames in partially pre-vaporized fuel sprays is theoretically investigated in this work. A general theory is developed to describe flame propagation speed, flame temperature, droplet evaporation onset and completion locations. The influences of liquid fuel and gas mixture properties on spherical spray flame propagation are studied. The results indicate that the spray flame propagation speed is enhanced with increased droplet mass loading and/or evaporation heat exchange coefficient (or evaporation rate). Opposite trends are found when the latent heat …
Evolution of fuel droplet evaporation zone and its interaction with the propagating flame front are studied in this work. A general theory is developed to describe the evolutions of flame propagation speed, flame temperature, droplet evaporation onset and completion locations in ignition and propagation of spherical flames. The influences of liquid droplet mass loading, heat exchange coefficient (or evaporation rate) and Lewis number on spherical spray flame ignition are studied. Two flame regimes are considered, i.e., heterogeneous and homogeneous flames, based on the mixture condition near t…
Flame propagation through a non-volatile solid-fuel suspension is studied using a simplified, time-dependent numerical model that considers the influence of both diffusional and kinetic rates on the particle combustion process. It is assumed that particles react via a single-step, first-order Arrhenius surface reaction with an oxidizer delivered to the particle surface through gas diffusion. Unlike the majority of models previously developed for flames in suspensions, no external parameters are imposed, such as particle ignition temperature, combustion time, or the assumption of either kinetic…
This study aims to build a theoretical model to describe the ignition process of spherical spray flame laden with fuel droplets under overall fuel-lean condition. Two characteristic fronts are introduced to reveal where the evaporation starts and ends in the ignition process. The results demonstrate that the flame has been strengthened with extra fuel droplet adding while the minimum ignition energy (MIE) is decreased. The evolution of the two evaporation fronts in the flame kernel and propagating branches has also be revealed coupled with the evaporation zone length.
We experimentally investigate the evaporation of very volatile liquid droplets (Novec 7000 Engineered Fluid) in a turbulent spray. Droplets with diameters of the order of a few micrometers are produced by a spray nozzle and then injected into a purpose-built enclosed dodecahedral chamber, where the ambient temperature and relative humidity in the chamber are carefully controlled. We observe water condensation on the rapidly evaporating droplet, both for the spray and for a single acoustically levitated millimetric Novec 7000 droplet. We further examine the effect of humidity, and reveal that a…
The present work investigates forced ignition and oscillating propagation of spray flame in a mixture of fine ethanol droplets and air. Eulerian-Eulerian method with two-way coupling is used and detailed chemical mechanism is considered. Different droplet diameters and liquid fuel equivalence ratios (ER) are studied. The evaporation completion front (ECF) is defined to study the interactions between the evaporation zone and flame front. The gas composition at the flame front is quantified through an effective ER. The results show that the kernel trajectory is considerably affected by droplet s…
Volatile viscous fluids on partially-wetting solid substrates can exhibit interesting interfacial instabilities and pattern formation. We study the dynamics of vapor condensation and fluid evaporation governed by a one-sided model in a low Reynolds number lubrication approximation incorporating surface tension, intermolecular effects and evaporative fluxes. Parameter ranges for evaporation- dominated and condensation-dominated regimes and a critical case are identified. Interfacial instabilities driven by the competition between the disjoining pressure and evaporative effects are studied via l…
During the spreading of a liquid over a solid substrate, the contact line can stay pinned at sharp edges until the contact angle exceeds a critical value. At (or sufficiently near) equilibrium, this is known as Gibbs' criterion. Here, we show both experimentally and theoretically that for completely wetting volatile liquids there also exists a dynamically-produced critical angle for depinning, which increases with the evaporation rate. This suggests that one may introduce a simple modification of the Gibbs' criterion for (de)pinning, that accounts for the non-equilibrium effect of evaporation.
The dynamics of thin volatile droplets comprising of binary mixtures deposited on a heated substrate are investigated. Using lubrication theory, we develop a novel one-sided model to predict the spreading and retraction of an evaporating sessile axisymmetric droplet formed of a volatile binary mixture on a substrate with high wettability. A thin droplet with a moving contact line is considered, taking into account the variation of liquid properties with concentration as well as the effects of inertia. The parameter space is explored and the resultant effects on wetting and evaporation are eval…
Spark ignition of ethanol droplet/vapor/air mixture is studied with a Eulerian-Eulerian method and detailed chemical mechanism. The flame kernel-droplet interaction is quantified with an evaporation completion front (ECF). Two categories of spray flames can hence be defined based on the relative location between the ECF and flame front, i.e., homogeneous and heterogeneous spray flames. An element-based equivalence ratio (ER) at the flame front (flame ER for short) is introduced to measure the gas composition in evaporating sprays. For overall fuel-lean mixtures, quasi-stationary spherical flam…
The Marangoni contraction of sessile droplets occurs when a binary mixture of volatile liquids is placed on a high-energy surface. Although the surface is wetted completely by the mixture and its components, a quasi-stationary non-vanishing contact angle is observed. This seeming contradiction is caused by Marangoni flows that are driven by evaporative depletion of the volatile component near the edge of the droplet. Here we show that the composition of such droplets is governed by Taylor dispersion, a consequence of diffusion and strong internal shear flow. We demonstrate that Taylor dispersi…
Droplet evaporation of multicomponent droplets is essential for various physiochemical applications, e.g. in inkjet printing, spray cooling and microfabrication. In this work, we observe and study phase segregation of an evaporating sessile binary droplet, consisting of a mixture of water and a surfactant-like liquid (1,2-hexanediol). The phase segregation (i.e., demixing) leads to a reduced water evaporation rate of the droplet and eventually the evaporation process ceases due to shielding of the water by the non-volatile 1,2-hexanediol. Visualizations of the flow field by particle image velo…
When a volatile droplet is deposited on a floating swellable sheet, it becomes asymmetric, lobed and mobile. We describe and quantify this phenomena that involves nonequilibrium swelling, evaporation and motion, working together to realize a self-excitable spatially extended oscillator. Solvent penetration causes the film to swell locally and eventually buckle, changing its shape and the drop responds by moving. Simultaneously, solvent evaporation from the swollen film causes it to regain its shape once the droplet has moved away. The process repeats and leads to complex pulsatile spinning and…
Understanding the dynamics of liquid films that make up bubbles is of practical and fundamental importance. Practically, this understanding is crucial for tuning bubble stability, while fundamentally, thin films are an excellent platform to study 2D flows. Here we study the spatiotemporal film thickness dynamics of bubbles subjected to evaporation driven Marangoni flows. Initially, we demonstrate how bubble stability can be dramatically tuned with the help of evaporation driven flows. Subsequently, we reveal that the spatial symmetry of thickness profiles evolves non-monotonically with the vol…
The evaporation of multi-component droplets is relevant to various applications but challenging to study due to the complex physicochemical dynamics. Recently, Li (2018) reported evaporation-triggered segregation in 1,2-hexanediol-water binary droplets. In this present work, we added 0.5 wt% silicone oil into the 1,2-hexanediol-water binary solution. This minute silicone oil concentration dramatically modifies the evaporation process as it triggers an early extraction of the 1,2-hexanediol from the mixture. Surprisingly, we observe that the segregation of 1,2-hexanediol forms plumes, rising up…
Interfacial stability is important for many processes involving heat and mass transfer across two immiscible phases. When this transfer takes place in the form of evaporation of a binary solution with one component being more volatile than the other, gradients in surface tension can arise. These gradients can ultimately destabilise the liquid-gas interface. In the present work, we study the evaporation of an ethanol-water solution, for which ethanol has a larger volatility. The solution is contained in a horizontal Hele-Shaw cell which is open from one end to allow for evaporation into air. A …
Evaporating liquid droplets are omnipresent in nature and technology, such as in inkjet printing, coating, deposition of materials, medical diagnostics, agriculture, food industry, cosmetics, or spills of liquids. While the evaporation of pure liquids, liquids with dispersed particles, or even liquid mixtures has intensively been studied over the last two decades, the evaporation of ternary mixtures of liquids with different volatilities and mutual solubilities has not yet been explored. Here we show that the evaporation of such ternary mixtures can trigger a phase transition and the nucleatio…
Phase segregation triggered by selective evaporation can emerge in multicomponent systems, leading to complex physiochemical hydrodynamics. Recently, Li et al. (Phys. Rev. Lett., vol. 120, 2018, 224501) and Kim & Stone (J. Fluid Mech., vol. 850, 2018, pp. 769-783) reported a segregative behavior (i.e., demixing) in an evaporating binary droplet. In this work, by means of experiments and theoretical analysis, we investigate the flow dynamics after the occurrence of the phase segregation. As example, we take the 1,2-hexanediol-water binary droplet system. First, we experimentally reveal the over…
We study the size and shape of the final deposit obtained when a drop with colloidal particles has dried on a super-hydrophobic surface made of micro-posts. As expected, most of the particles lie inside a circular area, which radius roughly corresponds to the Laplace pressure threshold for liquid impalement inside the structure (Cassie-Wenzel transition), inducing a coffee-stain deposit due to contact-line pinning. Less expected is the observation of tiny deposits on top of posts in the area external to the main ring, despite the low macroscopic liquid/solid friction. Experiments are carried o…
The evaporation of a binary sessile ethanol-water droplet on an inclined substrate is studied experimentally just below the critical sliding angles for different substrate temperatures. A customized goniometer equipped with a CMOS camera and an infrared (IR) camera is used. The droplet is observed to remain pinned in the advancing side during the evaporation process, while the receding side contracts. The asymmetry in the advancing and receding contact angles of the droplet on inclined substrate results in complex thermo-solutal Marangoni convection that is captured through IR images. The drop…
Motived by recent ground-based and microgravity experiments investigating the interfacial dynamics of a volatile liquid (FC-72, $Pr=12.34$) contained in a heated cylindrical cell, we numerically study the thermocapillary-driven flow in such an evaporating liquid layer. Particular attention is given to the prediction of the transition of the axisymmetric flow to fully three-dimensional patterns when the applied temperature increases. The numerical simulations rely on an improved one-sided model of evaporation by including heat and mass transfer through the gas phase via the heat transfer Biot n…
We experimentally investigate the evaporation dynamics of sessile droplets of a fixed volume consisting of different compositions of ethanol-water binary mixture at different substrate temperatures (T_s). At T_s=25oC, we observe pinned-stage linear evaporation for pure droplets, but a binary droplet undergoes two distinct evaporation stages: an early pinned stage and a later receding stage. In the binary droplet, the more volatile ethanol, evaporates faster leading to a nonlinear trend in the evaporation process at the early stage. The phenomenon observed in the present study at T_s=25oC is si…
The dispersion of respiratory saliva droplets by indoor wake structures may enhance the transmission of various infectious diseases, as the wake spreads virus-laden droplets across the room. Thus, this study analyses the interaction between vortical wake structures and exhaled multi-component saliva droplets. A self-propelling analytically-described dipolar vortex is chosen as a model wake flow, passing through a cloud of micron-sized evaporating saliva droplets. The droplets' spatial location, velocity, diameter, and temperature are traced and coupled to their local flow field. For the first …
