The past years have witnessed increasing research interest in achieving passive human localization with commodity WiFi devices. However, due to the fundamental limited spatial resolution of WiFi signals, it is still very difficult to achieve accurate localization with existing commodity WiFi devices. To tackle this problem, in this paper, we propose to exploit the degree of freedom provided by the Intelligent Reflecting Surface (IRS), which is composed of a large number of controllable reflective elements, to modulate the spatial distribution of WiFi signals and thus break down the spatial resolution limitation of WiFi signals to achieve accurate localization. Specifically, in the single-person scenario, we derive the closed-form solution to optimally control the phase shift of the IRS elements. In the multi-person scenario, we propose a Side-lobe Cancellation Algorithm to eliminate the near-far effect to achieve accurate localization of multiple persons in an iterative manner. Extensive simulation results demonstrate that without any change to the existing WiFi infrastructure, the proposed framework can locate multiple moving persons passively with sub-centimeter accuracy under multipath interference and random noise.
Currently there is no standard indoor positioning system, similar to outdoor GPS. However, WiFi signals have been used in a large number of proposals to achieve the above positioning, many of which use machine learning to do so. But what are the most commonly used techniques in machine learning? What accuracy do they achieve? Where have they been tested? This article presents a systematic review of works between 2019 and 2021 that use WiFi as the signal for positioning and machine learning models to estimate indoor position. 64 papers have been identified as relevant, which have been systemati…
K-Neares Neighbors (KNN) and its variant weighted KNN (WKNN) have been explored for years in both academy and industry to provide stable and reliable performance in WiFi-based indoor positioning systems. Such algorithms estimate the location of a given point based on the locality information from the selected nearest WiFi neighbors according to some distance metrics calculated from the combination of WiFi received signal strength (RSS). However, such a process does not consider the relational information among the given point, WiFi neighbors, and the WiFi access points (WAPs). Therefore, this …
WiFi-based indoor localization has received extensive attentions from both academia and industry. However, the overhead of constructing and maintaining the WiFi fingerprint map remains a bottleneck for the wide-deployment of WiFi-based indoor localization systems. Recently, robots are adopted as the professional surveyor to fingerprint the environment autonomously. But the time and energy cost still limit the coverage of the robot surveyor, thus reduce its scalability. To fill this need, we design an AutonomousWiFi Fingerprinting system, called AuF, which autonomously constructs the fingerprin…
The accuracy of smartphone-based positioning methods using WiFi usually suffers from ranging errors caused by non-line-of-sight (NLOS) conditions. Previous research usually exploits several statistical features from a long time series (hundreds of samples) of WiFi received signal strength (RSS) or WiFi round-trip time (RTT) to achieve a high identification accuracy. However, the long time series or large sample size attributes to high power and time consumption in data collection for both training and testing. This will also undoubtedly be detrimental to user experience as the waiting time of …
Precise indoor localization is an increasingly demanding requirement for various emerging applications, like Virtual/Augmented reality and personalized advertising. Current indoor environments are equipped with pluralities of WiFi access points (APs), whose deployment is expected to be massive in the future enabling highly precise localization approaches. Though the conventional model-based localization schemes have achieved sub-meter level accuracy by fusing multiple channel state information (CSI) observations, the corresponding computational overhead is usually significant, especially in th…
Huazhong University of Science and Technology（华中科技大学）
This paper presents an indoor pose estimation system for micro aerial vehicles (MAVs) with a single WiFi access point. Conventional approaches based on computer vision are limited by illumination conditions and environmental texture. Our system is free of visual limitations and instantly deployable, working upon existing WiFi infrastructure without any deployment cost. Our system consists of two coupled modules. First, we propose an angle-of-arrival (AoA) estimation algorithm to estimate MAV attitudes and disentangle the AoA for positioning. Second, we formulate a WiFi-inertial sensor fusion m…
University of Kassel（卡塞尔大学）；Interdisciplinary Research Center for Information System Design (ITeG)（信息系统设计跨学科研究中心（ITeG））
The ubiquitous presence of WiFi access points and mobile devices capable of measuring WiFi signal strengths allow for real-world applications in indoor localization and mapping. In particular, no additional infrastructure is required. Previous approaches in this field were, however, often hindered by problems such as effortful map-building processes, changing environments and hardware differences. We tackle these problems focussing on topological maps. These represent discrete locations, such as rooms, and their relations, e.g., distances and transition frequencies. In our unsupervised method,…
Modeling human mobility has a wide range of applications from urban planning to simulations of disease spread. It is well known that humans spend 80% of their time indoors but modeling indoor human mobility is challenging due to three main reasons: (i) the absence of easily acquirable, reliable, low-cost indoor mobility datasets, (ii) high prediction space in modeling the frequent indoor mobility, and (iii) multi-scalar periodicity and correlations in mobility. To deal with all these challenges, we propose WiFiMod, a Transformer-based, data-driven approach that models indoor human mobility at …
The fact that almost every person owns a smartphone device that can be precisely located is both empowering and worrying. If methods for accurate tracking of devices (and their owners) via WiFi probing are developed in a responsible way, they could be applied in many different fields, from data security to urban planning. Numerous approaches to data collection and analysis have been covered, some of which use active sensing equipment, while others rely on passive probing, which takes advantage of nearly universal smartphone usage and WiFi network coverage. In this study, we introduce a system …
Indoor localization becomes a raising demand in our daily lives. Due to the massive deployment in the indoor environment nowadays, WiFi systems have been applied to high accurate localization recently. Although the traditional model based localization scheme can achieve sub-meter level accuracy by fusing multiple channel state information (CSI) observations, the corresponding computational overhead is significant. To address this issue, the model-free localization approach using deep learning framework has been proposed and the classification based technique is applied. In this paper, instead …
University of Melbourne（墨尔本大学）；China University of Geosciences（中国地质大学）；National Engineering Research Center for Geographic Information System（国家地理信息系统工程技术研究中心）
Fingerprinting is a popular indoor localization technique since it can utilize existing infrastructures (e.g., access points). However, its site survey process is a labor-intensive and time-consuming task, which limits the application of such systems in practice. In this paper, motivated by the availability of advanced sensing capabilities in smartphones, we propose a fast and reliable fingerprint collection method to reduce the time and labor required for site survey. The proposed method uses a landmark graph-based method to automatically associate the collected fingerprints, which does not r…
WiFi-based indoor localization has now matured for over a decade. Most of the current localization algorithms rely on the WiFi access points (APs) in the enterprise network to localize the WiFi user accurately. Thus, the WiFi user's location information could be easily snooped by an attacker listening through a compromised WiFi AP. With indoor localization and navigation being the next step towards automation, it is important to give users the capability to defend against such attacks. In this paper, we present MIRAGE, a system that can utilize the downlink physical layer information to create…
Detection and interpretation of human activities have emerged as a challenging healthcare problem in areas such as assisted living and remote monitoring. Besides traditional approaches that rely on wearable devices and camera systems, WiFi based technologies are evolving as a promising solution for indoor monitoring and activity recognition. This is, in part, due to the pervasive nature of WiFi in residential settings such as homes and care facilities, and unobtrusive nature of WiFi based sensing. Advanced signal processing techniques can accurately extract WiFi channel status information (CSI…
An indoor robot navigation system is investigated, where an intelligent reflecting surface (IRS) is employed to enhance the connectivity between the access point (AP) and a mobile robotic user. The considered system is optimized for minimization of the travelling time/distance of the mobile robotic user from a given starting point to a predefined final location, while satisfying constraints on the communication quality. To tackle this problem, a radio map based approach is proposed to exploit location-dependent channel propagation knowledge. Specifically, a channel power gain map is constructe…
Indian Institute of Technology, Bombay（印度理工学院孟买分校）
The Global Navigation Satellite Systems (GNSS) like GPS suffer from accuracy degradation and are almost unavailable in indoor environments. Indoor positioning systems (IPS) based on WiFi signals have been gaining popularity. However, owing to the strong spatial and temporal variations of wireless communication channels in the indoor environment, the achieved accuracy of existing IPS is around several tens of centimeters. We present the detailed design and implementation of a self-adaptive WiFi-based indoor distance estimation system using LSTMs. The system is novel in its method of estimating …
The existing localization systems for indoor applications basically rely on wireless signal. With the massive deployment of low-cost cameras, the visual image based localization become attractive as well. However, in the existing literature, the hybrid visual and wireless approaches simply combine the above schemes in a straight forward manner, and fail to explore the interactions between them. In this paper, we propose a joint visual and wireless signal feature based approach for high-precision indoor localization system. In this joint scheme, WiFi signals are utilized to compute the coarse a…
We introduce WiCluster, a new machine learning (ML) approach for passive indoor positioning using radio frequency (RF) channel state information (CSI). WiCluster can predict both a zone-level position and a precise 2D or 3D position, without using any precise position labels during training. Prior CSI-based indoor positioning work has relied on non-parametric approaches using digital signal-processing (DSP) and, more recently, parametric approaches (e.g., fully supervised ML methods). However these do not handle the complexity of real-world environments well and do not meet requirements for la…
Intelligent reflecting surfaces (IRS) are a key enabler of various new applications in 6G smart radio environments. By utilizing an IRS prototype system, this paper aims to enhance self-interference (SI) cancellation for breath tracking with commodity WiFi devices. SI suppression is a crucial requirement for breath tracking with a single antenna site as the SI severely limits the radio sensing range by shadowing the received signal with its own transmit signal. To this end, we propose to assist SI cancellation by exploiting an IRS to form a suitable cancellation signal in the analog domain. Bu…
Cooperative localization for indoor WiFi networks have received little attention thus far. Many cooperative location algorithms exist for Wireless Sensor Network Applications but their suitability for WiFi based networks has not been studied. In this paper the performance of the Sparse Finite Semi Definite Program (SFSDP) has been examined using real measurements data and under different indoor conditions. Effects of other network parameters such as varying number of anchors and blind nodes are also included.
With the unprecedented demand for location-based services in indoor scenarios, wireless indoor localization has become essential for mobile users. While GPS is not available at indoor spaces, WiFi RSS fingerprinting has become popular with its ubiquitous accessibility. However, it is challenging to achieve robust and efficient indoor localization with two major challenges. First, the localization accuracy can be degraded by the random signal fluctuations, which would influence conventional localization algorithms that simply learn handcrafted features from raw fingerprint data. Second, mobile …
In this paper, we propose a methodology for estimating the crowd speed using WiFi devices without relying on people to carry any device. Our approach not only enables speed estimation in the region where WiFi links are, but also in the adjacent possibly WiFi-free regions. More specifically, we use a pair of WiFi links in one region, whose RSSI measurements are then used to estimate the crowd speed, not only in this region, but also in adjacent WiFi-free regions. We first prove how the cross-correlation and the probability of crossing the two links implicitly carry key information about the ped…
Indoor human activity recognition (HAR) explores the correlation between human body movements and the reflected WiFi signals to classify different activities. By analyzing WiFi signal patterns, especially the dynamics of channel state information (CSI), different activities can be distinguished. Gathering CSI data is expensive both from the timing and equipment perspective. In this paper, we use synthetic data to reduce the need for real measured CSI. We present a semi-supervised learning method for CSI-based activity recognition systems in which long short-term memory (LSTM) is employed to le…
In this paper, an indoor robot navigation system is investigated, where an intelligent reflecting surface (IRS) is employed to enhance the connectivity between the access point (AP) and robotic users. Both single-user and multiple-user scenarios are considered. In the single-user scenario, one mobile robotic user (MRU) communicates with the AP. In the multiple-user scenario, the AP serves one MRU and one static robotic user (SRU) employing either non-orthogonal multiple access (NOMA) or orthogonal multiple access (OMA) transmission. The considered system is optimized for minimization of the tr…
Channel state information (CSI) based fingerprinting for WIFI indoor localization has attracted lots of attention very recently.The frequency diverse and temporally stable CSI better represents the location dependent channel characteristics than the coarsereceived signal strength (RSS). However, the acquisition of CSI requires the cooperation of access points (APs) and involves only dataframes, which imposes restrictions on real-world deployment. In this paper, we present CRISLoc, the first CSI fingerprinting basedlocalization prototype system using ubiquitous smartphones. CRISLoc operates in …
Radio channel state information (CSI) measured with many receivers is a good resource for localizing a transmit device with machine learning with a discriminative model. However, CSI localization is nontrivial when the radio map is complicated, such as in building corridors. This paper introduces a view-selective deep learning (VSDL) system for indoor localization using CSI of WiFi. The multiview training with CSI obtained from multiple groups of access points (APs) generates latent features on supervised variational deep network. This information is then applied to an additional network for d…
Bristol Research & Innovation Laboratory, Toshiba Europe Ltd.（东芝欧洲有限公司布里斯托尔研究与创新实验室）；University of Bristol（布里斯托大学）
This paper studies the indoor localisation of WiFi devices based on a commodity chipset and standard channel sounding. First, we present a novel shallow neural network (SNN) in which features are extracted from the channel state information (CSI) corresponding to WiFi subcarriers received on different antennas and used to train the model. The single-layer architecture of this localisation neural network makes it lightweight and easy-to-deploy on devices with stringent constraints on computational resources. We further investigate for localisation the use of deep learning models and design nove…
University of Verona（维罗纳大学）；Chemnitz University of Technology（开姆尼茨工业大学）
Detecting the presence of persons and estimating their quantity in an indoor environment has grown in importance recently. For example, the information if a room is unoccupied can be used for automatically switching off the light, air conditioning, and ventilation, thereby saving significant amounts of energy in public buildings. Most existing solutions rely on dedicated hardware installations, which involve presence sensors, video cameras, and carbon dioxide sensors. Unfortunately, such approaches are costly, are subject to privacy concerns, have high computational requirements, and lack ubiq…
Institut Charles Delaunay（查尔斯·德洛奈研究所）；Université de Technologie de Troyes（特鲁瓦技术大学）；Université de Rouen（鲁昂大学）
Indoor localization has become an important issue for wireless sensor networks. This paper presents a zoning-based localization technique that uses WiFi signals and works efficiently in indoor environments. The targeted area is composed of several zones, the objective being to determine the zone of the sensor using an observation model based on statistical learning.
Bristol Research & Innovation Laboratory（布里斯托尔研究与创新实验室）；Toshiba Europe Ltd.（东芝欧洲有限公司）；University of Bristol（布里斯托尔大学）
This paper studies a WiFi indoor localisation technique based on using a deep learning model and its transfer strategies. We take CSI packets collected via the WiFi standard channel sounding as the training dataset and verify the CNN model on the subsets collected in three experimental environments. We achieve a localisation accuracy of 46.55 cm in an ideal $(6.5m \times 2.5m)$ office with no obstacles, 58.30 cm in an office with obstacles, and 102.8 cm in a sports hall $(40 \times 35m)$. Then, we evaluate the transfer ability of the proposed model to different environments. The experimental r…
Robotics Institute, University of Michigan（密歇根大学机器人研究所）
WiFi technology has been used pervasively in fine-grained indoor localization, gesture recognition, and adaptive communication. Achieving better performance in these tasks generally boils down to differentiating Line-Of-Sight (LOS) from Non-Line-Of-Sight (NLOS) signal propagation reliably which generally requires expensive/specialized hardware due to the complex nature of indoor environments. Hence, the development of low-cost accurate positioning systems that exploit available infrastructure is not entirely solved. In this paper, we develop a framework for indoor localization and tracking of …
In recent years, the Internet of Things (IoT) has grown to include the tracking of devices through the use of Indoor Positioning Systems (IPS) and Location Based Services (LBS). When designing an IPS, a popular approach involves using wireless networks to calculate the approximate location of the target from devices with predetermined positions. In many smart building applications, LBS are necessary for efficient workspaces to be developed. In this paper, we examine two memoryless positioning techniques, K-Nearest Neighbor (KNN), and Naive Bayes, and compare them with simple trilateration, in …
Simultaneously transmitting (refracting) and reflecting reconfigurable intelligent surfaces (STAR-RISs) have been recently identified to improve the spectrum/energy efficiency and extend the communication range. However, their potential for enhanced concurrent indoor and outdoor localization has not yet been explored. In this paper, we study the fundamental limits, i.e., the Cramér Rao lower bounds (CRLBs) via Fisher information analyses, on the three-dimensional (3D) localization performance with a STAR-RIS at millimeter wave frequencies. The effect of the power splitting between refraction a…
University of Electronic Science and Technology of China（电子科技大学）
Based on various existing wireless fingerprint location algorithms in intelligent sports venues, a high-precision and fast indoor location algorithm improved weighted k-nearest neighbor (I-WKNN) is proposed. In order to meet the complex environment of sports venues and the demand of high-speed sampling, this paper proposes an AP selection algorithm for offline and online stages. Based on the characteristics of the signal intensity distribution in intelligent venues, an asymmetric Gaussian filter algorithm is proposed. This paper introduces the application of the positioning algorithm in the in…
