The Global Navigation Satellite Systems (GNSS) like GPS suffer from accuracy degradation and are almost unavailable in indoor environments. Indoor positioning systems (IPS) based on WiFi signals have been gaining popularity. However, owing to the strong spatial and temporal variations of wireless communication channels in the indoor environment, the achieved accuracy of existing IPS is around several tens of centimeters. We present the detailed design and implementation of a self-adaptive WiFi-based indoor distance estimation system using LSTMs. The system is novel in its method of estimating with high accuracy the distance of an object by overcoming possible causes of channel variations and is self-adaptive to the changing environmental and surrounding conditions. The proposed design has been developed and physically realized over a WiFi network consisting of ESP8266 (NodeMCU) devices. The experiment were conducted in a real indoor environment while changing the surroundings in order to establish the adaptability of the system. We introduce and compare different architectures for this task based on LSTMs, CNNs, and fully connected networks (FCNs). We show that the LSTM based model performs better among all the above-mentioned architectures by achieving an accuracy of 5.85 cm with a confidence interval of 93% on the scale of (4.14 m * 2.86 m). To the best of our knowledge, the proposed method outperforms other methods reported in the literature by a significant margin.
With the growing integration of location based services (LBS) such as GPS in mobile devices, indoor position systems (IPS) have become an important role for research. There are several IPS methods such as AOA, TOA, TDOA, which use trilateration for indoor location estimation but are generally based on line-of-sight. Other methods rely on classification such as fingerprinting which uses WLAN indoor signals. This paper re-examines the classical WLAN fingerprinting accuracy which uses received signal strength (RSS) measurements by introducing channel estimates for improvements in the classificati…
Recently, location-based services (LBS) have steered attention to indoor positioning systems (IPS). WLAN-based IPSs relying on received signal strength (RSS) measurements such as fingerprinting are gaining popularity due to proven high accuracy of their results. Typically, sets of RSS measurements at selected locations from several WLAN access points (APs) are used to calibrate the system. Retrieval of such measurements from WLAN cards are commonly at one-Hz rate. Such measurement collection is needed for offline radio-map surveying stage which aligns fingerprints to locations, and for online …
Indoor positioning systems (IPS) are emerging technologies due to an increasing popularity and demand in location based service (LBS). Because traditional positioning systems such as GPS are limited to outdoor applications, many IPS have been proposed in literature. WLAN-based IPS are the most promising due to its proven accuracy and infrastructure deployment. Several WLAN-based IPS have been proposed in the past, from which the best results have been shown by so-called fingerprint-based systems. This paper proposes an indoor positioning system which extends traditional WLAN fingerprinting by …
Cooperative localization for indoor WiFi networks have received little attention thus far. Many cooperative location algorithms exist for Wireless Sensor Network Applications but their suitability for WiFi based networks has not been studied. In this paper the performance of the Sparse Finite Semi Definite Program (SFSDP) has been examined using real measurements data and under different indoor conditions. Effects of other network parameters such as varying number of anchors and blind nodes are also included.
Indoor intrusion detection technology has been widely utilized in network security monitoring, smart city, entertainment games, and other fields. Most existing indoor intrusion detection methods directly exploit the Received Signal Strength (RSS) data collected by Monitor Points (MPs) and do not consider the instability of WLAN signals in the complex indoor environments. In response to this urgent problem, this paper proposes a novel WLAN indoor intrusion detection method based on deep signal feature fusion and Minimized Multiple Kernel Maximum Mean Discrepancy (Minimized-MKMMD). Firstly, the …
Indoor positioning systems exploiting WLAN signal measurements such as Received Signal Strength (RSS) are gaining popularity due to high accuracy of the results. Sets of RSS and other measurements at designated locations from available WLAN access points (APs) are conventionally called fingerprints and retrieved from network cards at typically one Hz rate. Such measurement collection is needed for offline radio-map surveying stage which assigns fingerprints to locations, and for online navigation stage, when collected measurements are associated with the radio-map for positioning. As WLAN netw…
A novel multi-scale temporal convolutional network (TCN) and long short-term memory network (LSTM) based magnetic localization approach is proposed. To enhance the discernibility of geomagnetic signals, the time-series preprocessing approach is constructed at first. Next, the TCN is invoked to expand the feature dimensions on the basis of keeping the time-series characteristics of LSTM model. Then, a multi-scale time-series layer is constructed with multiple TCNs of different dilation factors to address the problem of inconsistent time-series speed between localization model and mobile users. …
Pervasive healthcare is a promising assisted-living solution for chronic patients. However, current cutting-edge communication technologies are not able to strictly meet the requirements of these applications, especially in the case of life-threatening events. To bridge this gap, this paper proposes a new architecture to support indoor healthcare monitoring, with a focus on epileptic patients. Several novel elements are introduced. The first element is the cascading of a WLAN and a cellular network, where IEEE 802.11ax is used for the wireless local area network to collect physiological and en…
Internet of Things (IoT)-based indoor localization has gained significant popularity recently to satisfy the ever-increasing requirements of indoor Location-based Services (LBS). In this context, Inertial Measurement Unit (IMU)-based localization is of interest as it provides a scalable solution independent of any proprietary sensors/modules. Existing IMU-based methodologies, however, are mainly developed based on statistical heading and step length estimation techniques that suffer from cumulative error issues and have extensive computational time requirements limiting their application for r…
A neural network (NN)-based approach for indoor localization via cellular long-term evolution (LTE) signals is proposed. The approach estimates, from the channel impulse response (CIR), the range between an LTE eNodeB and a receiver. A software-defined radio (SDR) extracts the CIR, which is fed to a long short-term memory model (LSTM) recurrent neural network (RNN) to estimate the range. Experimental results are presented comparing the proposed approach against a baseline RNN without LSTM. The results show a receiver navigating for 100 m in an indoor environment, while receiving signals from o…
With explosive growth of the mobile Internet access and the popularization of wireless local area network (WLAN) access points (APs), wireless fidelity (WiFi) offloading is considered as an important supplementary technique to reduce the load of cellular infrastructure and enhance quality of network service. In this paper, we design and implement the framework of LTEWiFi aggregation (LWA) which is in line with the 3rd Generation Partnership Project (3GPP) released standard recently. In the LWA system, the process of data offloading is different from that of WiFi interworking on the cellular co…
When different radio applications share the same spectrum, the separation by attenuating material is a way to mitigate potential interference. The indoor restriction for WLAN devices in 5150-5350 MHz is an example for a regulatory measure that aims at having WLAN devices operating in an environment that provides sufficient attenuation to enable sharing with other services. In this paper we investigate whether an attenuating environment can be automatically detected without user interaction. Instead of detecting an indoor location, we are directly looking for a detection of an attenuating envir…
Fingerprinting-based approaches are particularly suitable for deploying indoor positioning systems for pedestrians with minimal infrastructure costs. The accuracy of the method, however, strongly depends on the quality of collected labeled fingerprints within the calibration phase, which is a tedious process when done manually in a static fashion. We present VI-SLAM2tag, a system for auto-labeling of dynamically collected fingerprints using the visual-inertial simultaneous localization and mapping (VI-SLAM) module of ARCore. ARCore occasionally updates its internal coordinate system. Mapping t…
An indoor, real-time location system (RTLS) can benefit both hospitals and patients by improving clinical efficiency through data-driven optimization of procedures. Bluetooth-based RTLS systems are cost-effective but lack accuracy and robustness because Bluetooth signal strength is subject to fluctuation. We developed a machine learning-based solution using a Long Short-Term Memory (LSTM) network followed by a Multilayer Perceptron classifier and a posterior constraint algorithm to improve RTLS performance. Training and validation datasets showed that most machine learning models perform well …
In this paper, we present a new location fingerprinting database comprised of Wi-Fi received signal strength (RSS) and geomagnetic field intensity measured with multiple devices at a multi-floor building in Xi'an Jiatong-Liverpool University, Suzhou, China. We also provide preliminary results of localization and trajectory estimation based on convolutional neural network (CNN) and long short-term memory (LSTM) network with this database. For localization, we map RSS data for a reference point to an image-like, two-dimensional array and then apply CNN which is popular in image and video analysi…
University of Victoria（维多利亚大学）；Fortinet Canada Inc.（Fortinet加拿大公司）
This paper proposes recurrent neuron networks (RNNs) for a fingerprinting indoor localization using WiFi. Instead of locating user's position one at a time as in the cases of conventional algorithms, our RNN solution aims at trajectory positioning and takes into account the relation among the received signal strength indicator (RSSI) measurements in a trajectory. Furthermore, a weighted average filter is proposed for both input RSSI data and sequential output locations to enhance the accuracy among the temporal fluctuations of RSSI. The results using different types of RNN including vanilla RN…
Indoor human activity recognition (HAR) explores the correlation between human body movements and the reflected WiFi signals to classify different activities. By analyzing WiFi signal patterns, especially the dynamics of channel state information (CSI), different activities can be distinguished. Gathering CSI data is expensive both from the timing and equipment perspective. In this paper, we use synthetic data to reduce the need for real measured CSI. We present a semi-supervised learning method for CSI-based activity recognition systems in which long short-term memory (LSTM) is employed to le…
Universitat Jaume I（海梅一世大学）；Tampere University（坦佩雷大学）；Universidade do Minho（米尼奥大学）
Indoor Positioning based on Machine Learning has drawn increasing attention both in the academy and the industry as meaningful information from the reference data can be extracted. Many researchers are using supervised, semi-supervised, and unsupervised Machine Learning models to reduce the positioning error and offer reliable solutions to the end-users. In this article, we propose a new architecture by combining Convolutional Neural Network (CNN), Long short-term memory (LSTM) and Generative Adversarial Network (GAN) in order to increase the training data and thus improve the position accurac…
Device-to-Device (D2D) communication propelled by artificial intelligence (AI) will be an allied technology that will improve system performance and support new services in advanced wireless networks (5G, 6G and beyond). In this paper, AI-based deep learning techniques are applied to D2D links operating at 5.8 GHz with the aim at providing potential answers to the following questions concerning the prediction of the received signal strength variations: i) how effective is the prediction as a function of the coherence time of the channel? and ii) what is the minimum number of input samples requ…
Hybrid ventilation is an energy-efficient solution to provide fresh air for most climates, given that it has a reliable control system. To operate such systems optimally, a high-fidelity control-oriented modesl is required. It should enable near-real time forecast of the indoor air temperature based on operational conditions such as window opening and HVAC operating schedules. However, physics-based control-oriented models (i.e., white-box models) are labour-intensive and computationally expensive. Alternatively, black-box models based on artificial neural networks can be trained to be good es…
Bristol Research & Innovation Laboratory, Toshiba Europe Ltd.（东芝欧洲有限公司布里斯托尔研究与创新实验室）；University of Bristol（布里斯托大学）
This paper studies the indoor localisation of WiFi devices based on a commodity chipset and standard channel sounding. First, we present a novel shallow neural network (SNN) in which features are extracted from the channel state information (CSI) corresponding to WiFi subcarriers received on different antennas and used to train the model. The single-layer architecture of this localisation neural network makes it lightweight and easy-to-deploy on devices with stringent constraints on computational resources. We further investigate for localisation the use of deep learning models and design nove…
