Since its beginnings, fission theory has asumed that low-energy induced fission takes place through transition-state channels at the barrier tops. Neverthess, up to now there is no microscopic theory applicable to those conditions. We suggest that modern reaction theory is suitable for this purpose, and propose a methodology based on a configuration-interaction framework using the Generator Coordinate Method (GCM). Simple reaction-theoretic models are constructed with the Gaussian Overlap Approximation (GOA) to parameterize both the dynamics within the channels and their incoherent couplings to states outside the barrier. The physical characteristics of the channels examined here are their effective bandwidths and the quality of the coupling to compound-nucleus states as measured by the transmission factor $T$. We also investigate the spacing of GCM states with respect to their degree of overlap. We find that a rather coarse mesh provides an acceptable accuracy for estimating the bandwidths and transmission factors. The common numerical stability problem in using the GCM is avoided due to the choice of meshes and the finite bandwidths of the channels. The bandwidths of the channels are largely controlled by the zero-point energy with respect to the collective coordinate in the GCM configurations.
A model is developed to calculate the total kinetic energy (TKE) distribution of fission fragments in the framework of the time-dependent generator coordinate method (TDGCM), extended to include dissipation effects in the description of induced fission dynamics. Starting from an expression for the dissipative term in the GCM Hamiltonian that determines the time evolution of a statistical collective wave function, derived in the first part of this work, the integrated flux of the probability current through the scission hyper-surface can be computed at different temperatures. The kinetic energy…
We study the role of different collective degrees of freedom in spontaneous fission process of even--even Fm isotopes. To find a proper collective space we examine a reach collection of nuclear shape parameters $\{β_λ\}$, with $λ$=2,3,4,5,6 and 8; as well as the paring degrees of freedom i.e. proton $Δ_{p}$ and neutron $Δ_{n}$ pairing gaps. On the basis of the multidimensional dynamic--programming method (MDPM) the optimal collective space $\{β_{2}, β_{4}, β_{6}, Δ_{p}, Δ_{n}\}$ for Fm isotopes was found.
Low-energy positive and negative parity collective states in the equilibrium minimum, and the dynamics of induced fission of actinide nuclei are investigated in a unified theoretical framework based on the generator coordinate method (GCM) with the Gaussian overlap approximation (GOA). The collective potential and inertia tensor, both at zero and finite temperature, are computed using the self-consistent multidimensionally constrained relativistic mean field (MDC-RMF) model, based on the energy density functional DD-PC1. Pairing correlations are treated in the BCS approximation with a separabl…
Fission transients describe the fission rate as it evolves towards the quasistationary value given by Kramers' formula. The nature of fission transients is dependent on the assumed initial distribution of the compound nuclei along the fission coordinate. Although the standard initial assumption of a near-spherical object leads to a transient suppression of the fission rate (fission delay), a moderate initial fissionlike deformation can reduce the magnitude of this suppression. For still larger initial deformations, transient fission enhancements are possible. Examples of this behavior are illu…
Starting from a quantum theory of dissipation for nuclear collective motion, the time-dependent generator coordinate method (TDGCM) is extended to allow for dissipation effects in the description of induced fission dynamics. The extension is based on a generalization of the GCM generating functions that includes excited states, and the resulting equation of motion in the collective coordinates and excitation energy. With the assumption of a narrow hamiltonian kernel, an expansion in a power series in collective momenta leads to a Schrödinger-like equation that explicitly includes a dissipation…
Collective mass tensors derived in the cranking approximation to the adiabatic time-dependent Hartree-Fock-Bogoliubov (ATDHFB) method are employed in a study of induced fission dynamics. Together with a collective potential determined in deformation-constrained self-consistent mean-field calculations based on nuclear energy density functionals, the mass tensors specify the collective Hamiltonian that governs the time evolution of the nuclear wave function from an initial state at equilibrium deformation, up to scission and the formation of fission fragments. In an illustrative calculation of l…
Collective mass tensor derived from the cranking approximation to the adiabatic time-dependent Hartree-Fock-Bogoliubov (ATDHFB) approach is compared with that obtained in the Gaussian Overlap Approximation (GOA) to the generator coordinate method. Illustrative calculations are carried out for one-dimensional quadrupole fission pathways in 256Fm. It is shown that the collective mass exhibits strong variations with the quadrupole collective coordinate. These variations are related to the changes in the intrinsic shell structure. The differences between collective inertia obtained in cranking and…
For 75 years the theory of nuclear fission has been based on the existence of a collective coordinate associated with the nuclear shape, an assumption required by the Bohr-Wheeler formula as well as by the R-matrix theory of fission. We show that it is also possible to formulate the theory without the help of collective coordinates. In the new formulation, fission is facilitated by individual states in the barrier region rather than channels over the barrier. In a certain limit the theory reduces to a formula closely related to the formula for electronic conductance through resonant tunneling …
The time-dependent generator coordinate method with the gaussian overlap approximation (TDGCM+GOA) formalism is applied to describe the fission of $^{252}$Cf. We perform analysis of fission from the initial states laying in the energetic range from the ground state to the state located 4 MeV above the fission barrier. The fission fragment mass distributions, obtained for different parity, energy of levels and types of mixed states, are calculated and compared with experimental data. The impact of the total time of wave packet propagation on the final results is studied as well. The weak depend…
Spontaneous fission barriers, quadrupole inertia, and zero-point quadrupole-energy corrections are calculated for 252,256,258Fm in the framework of the self-consistent Skyrme-Hartree-Fock+BCS theory. Two ways of computing dynamical inertia are employed: the Gaussian Overlap Approximation to the Generator Coordinate Method and cranking ansatz. The Skyrme results are compared with those of the Gogny-Hartree-Fock-Bogolyubov model.
Collective inertia is strongly influenced at the level crossing at which quantum system changes diabatically its microscopic configuration. Pairing correlations tend to make the large-amplitude nuclear collective motion more adiabatic by reducing the effect of those configuration changes. Competition between pairing and level crossing is thus expected to have a profound impact on spontaneous fission lifetimes. To elucidate the role of nucleonic pairing on spontaneous fission, we study the dynamic fission trajectories of $^{264}$Fm and $^{240}$Pu using the state-of-the-art self-consistent frame…
We propose event by event velocity fluctuations of nuclear fission fragments as an additional interesting observable that gives access to the nuclear temperature in an independent way from spectral measurements and relates the diffusion and friction coefficients for the relative fragment coordinate in Kramer-like models (in which some aspects of fission can be understood as the diffusion of a collective variable through a potential barrier). We point out that neutron emission by the heavy fragments can be treated in effective theory if corrections to the velocity distribution are needed.
Studies of fission dynamics, based on nuclear energy density functionals, have shown that the coupling between shape and pairing degrees of freedom has a pronounced effect on the nonperturbative collective inertia and, therefore, on dynamic (least-action) spontaneous fission paths and half-lives. Collective potentials and nonperturbative cranking collective inertia tensors are calculated using the multidimensionally-constrained relativistic mean-field (MDC-RMF) model. Pairing correlations are treated in the BCS approximation using a separable pairing force of finite range. Pairing fluctuations…
\noindent\textbf{Background:} While many phenomenological models for nuclear fission have been developed, a microscopic understanding of fission has remained one of the most challenging problems in nuclear physics. \noindent\textbf{Purpose:} We investigate an applicability of the generator coordinate method (GCM) as a microscopic theory for cluster radioactivities of heavy nuclei, which can be regarded as a fission with large mass asymmetry, that is, a phenomenon in between fission and $α$-decays. \noindent\textbf{Methods:} Based on the Gamow theory, we evaluate the preformation probability of…
An outstanding problem in the theory of nuclear fission is understanding the Hamiltonian dynamics at the scission point. Here we apply the Generator Coordinate Method to calculate decay widths for pre-scission configurations into the two-fragment continuum. Transitions that are allowed under diabatic dynamics can have widths up to several MeV. For non-diabatic decays through the pairing interaction, typical widths to a specific final state channel are 2-3 orders of magnitude smaller. The nucleus U-236 is taken as a representative example in the calculations.
The collective dynamics of low energy fission in 238U is described within a time-dependent formalism based on the Gaussian Overlap Approximation of the time-dependent Generator Coordinate Method. The intrinsic deformed configurations of the nucleus are determined from the self-consistent Hartree-Fock-Bogoliubov procedure employing the effective force D1S with constraints on the quadrupole and octupole moments. Fragment kinetic energy and mass distributions are calculated and compared with experimental evaluations. The effect of the collective dynamics along the fission paths and the influence …
With a help of the selfconsistent Hartree-Fock-Bogoliubov (HFB) approach with the D1S effective Gogny interaction and the Generator Coordinate Method (GCM) we incorporate the transverse collective vibrations to the one-dimensional model of the fission-barrier penetrability based on the traditional WKB method. The average fission barrier corresponding to the least-energy path in the two-dimensional potential energy landscape as function of quadrupole and octupole degrees of freedom is modified by the influence of the transverse collective vibrations along the nuclear path to fission. The set of…
The role of dynamical pairing in induced fission dynamics is investigated using the time-dependent generator coordinate method in the Gaussian overlap approximation, based on the microscopic framework of nuclear energy density functionals. A calculation of fragment charge yields for induced fission of $^{228}$Th is performed in a three-dimensional space of collective coordinates that, in addition to the axial quadrupole and octupole intrinsic deformations of the nuclear density, also includes an isoscalar pairing degree of freedom. It is shown that the inclusion of dynamical pairing has a pron…
Predicting the properties of neutron-rich nuclei far from the valley of stability is one of the major challenges of modern nuclear theory. In heavy and superheavy nuclei, a difference of only a few neutrons is sufficient to change the dominant fission mode. A theoretical approach capable of predicting such rapid transitions for neutron-rich systems would be a valuable tool to better understand r-process nucleosynthesis or the decay of super-heavy elements. In this work, we investigate for the first time the transition from asymmetric to symmetric fission through the calculation of primary fiss…
Accounting for viscous damping within Fokker-Planck equations led to various improvements in the understanding and analysis of nuclear fission of heavy nuclei. Analytical expressions for the fission time are typically provided by Kramers' theory, which improves on the Bohr-Wheeler estimate by including the time-scale related to many-particle dissipative processes along the deformation coordinate. However, Kramers' formula breaks down for sufficiently high excitation energies where Kramers' assumption of a large barrier no longer holds. In the regime $T>1$ MeV, Kramers' theory should be replace…
Fission-fragment mass distributions are asymmetric in fission of typical actinide nuclei for nucleon number $A$ in the range $228 \lnsim A \lnsim 258$ and proton number $Z$ in the range $90\lnsim Z \lnsim 100$. For somewhat lighter systems it has been observed that fission mass distributions are usually symmetric. However, a recent experiment showed that fission of $^{180}$Hg following electron capture on $^{180}$Tl is asymmetric. We calculate potential-energy surfaces for a typical actinide nucleus and for 12 even isotopes in the range $^{178}$Hg--$^{200}$Hg, to investigate the similarities a…
The non-perturbative method to compute Adiabatic Time Dependent Hartree Fock Bogoliubov (ATDHFB) collective inertias is extended to the Generator Coordinate Method (GCM) including the case of density dependent forces. The two inertias schemes are computed along the fission path of the $^{234}$U and compared with the perturbative results. We find that the non-perturbative schemes predict very similar collective inertias with a much richer structure than the one predicted by perturbative calculations. Moreover, the non-perturbative inertias show an extraordinary similitude with the exact GCM ine…
The constrained Hartree-Fock-Bogoliubov method is used with the Gogny interaction D1S to calculate potential energy surfaces of fissioning nuclei ${}^{226}$Th and ${}^{256,258,260}$Fm up to very large deformations. The constraints employed are the mass quadrupole and octupole moments. In this subspace of collective coordinates, many scission configurations are identified ranging from symmetric to highly asymmetric fragmentations. Corresponding fragment properties at scission are derived yielding fragment deformations, deformation energies, energy partitioning, neutron binding energies at sciss…
The microscopic studies on nuclear fission require the evaluation of the potential energy surface as a function of the collective coordinates. A reasonable choice of constraints on multipole moments should be made to describe the topography of the surface completely within a reasonable amount of computing time. We present a detailed analysis of fission barriers in the self-consistent Hartree-Fock-Bogoliubov approach with the D1S parametrization of the Gogny nucleon-nucleon interaction. Two heavy isotopes representing different spontaneous fission modes - $^{252}$Cf (asymmetric) and $^{258}$No …
The nuclear fission process is a dramatic example of the large-amplitude collective motion in which the nucleus undergoes a series of shape changes before splitting into distinct fragments. This motion can be represented by a pathway in the many-dimensional space of collective coordinates. The collective action along the fission pathway determines the spontaneous fission half-lives as well as mass and charge distributions of fission fragments. We study the performance and precision of various methods to determine the minimum action and minimum-energy fission trajectories in the collective spac…
Background: Recent experiments on beta-delayed fission in the mercury-lead region and the discovery of asym- metric fission in 180 Hg [1] have stimulated theoretical interest in the mechanism of fission in heavy nuclei. Purpose: We study fission modes and fusion valleys in 180 Hg and 198 Hg to reveal the role of shell effects in pre-scission region and explain the experimentally observed fragment mass asymmetry and its variation with A. Methods: We use the self-consistent nuclear density functional theory employing Skyrme and Gogny energy density functionals. Results: The potential energy surf…
Static and dynamic aspects of the fission process of $^{226}$Th are analyzed in a self-consistent framework based on relativistic energy density functionals. Constrained relativistic mean-field (RMF) calculations in the collective space of axially symmetric quadrupole and octupole deformations, based on the energy density functional PC-PK1 and a $δ$-force pairing, are performed to determine the potential energy surface of the fissioning nucleus, the scission line, the single-nucleon wave functions, energies and occupation probabilities, as functions of deformation parameters. Induced fission d…
We proposed a calculational framework for describing induced fission that avoids the Bohr-Wheeler assumption of well-defined fission channels. The building blocks of our approach are configurations that form a discrete, orthogonal basis and can be characterized by both energy and shape. The dynamics is to be determined by interaction matrix elements between the states rather than by a Hill-Wheeler construction of a collective coordinate. Within our approach, several simple limits can be seen: diffusion; quantized conductance; and ordinary decay through channels. The specific proposal for the d…
Accurate knowledge of fission fragment yields is an essential ingredient of numerous applications ranging from the formation of elements in the r-process to fuel cycle optimization for nuclear energy. The need for a predictive theory applicable where no data is available is an incentive to develop a fully microscopic approach to fission dynamics. In this work, we calculate the pre-neutron emission charge and mass distributions of the fission fragments formed in the neutron-induced fission of 239Pu using a microscopic method based on nuclear energy density functional (EDF) method, where large a…
Hartree-Fock-Bogoliubov calculations of hot fission in $^{240}\textrm{Pu}$ have been performed with a newly-implemented code that uses the D1S finite-range effective interaction. The hot-scission line is identified in the quadrupole-octupole-moment coordinate space. Fission-fragment shapes are extracted from the calculations. A benchmark calculation for $^{226}\textrm{Th}$ is obtained and compared to results in the literature. In addition, technical aspects of the use of HFB calculations for fission studies are examined in detail. In particular, the identification of scission configurations, t…
We present a description of nuclear spontaneous fission, and generally of quantum tunneling, in terms of instantons - periodic imaginary-time solutions to time-dependent mean-field equations - that allows for a comparison with more familiar and used generator coordinate (GCM) and adiabatic time-dependent Hartree-Fock (ATDHF) methods. It is shown that the action functional whose value for the instanton is the quasiclassical estimate of the decay exponent fulfils the minimum principle when additional constraints are imposed on trial fission paths. In analogy with mechanics, these are conditions …
The dynamics of induced fission of $^{226}$Th is investigated in a theoretical framework based on the finite-temperature time-dependent generator coordinate method (TDGCM) in the Gaussian overlap approximation (GOA). The thermodynamical collective potential and inertia tensor at temperatures in the interval $T=0 - 1.25$ MeV are calculated using the self-consistent multidimensionally constrained relativistic mean field (MDC-RMF) model, based on the energy density functional DD-PC1. Pairing correlations are treated in the BCS approximation with a separable pairing force of finite range. Constrai…
We propose a novel method to extract the prompt neutron multiplicity distribution, $P(ν)$, in fission reactions based on correlations between prompt neutrons, $γ$ rays, and fragment kinetic energy arising from energy conservation. In this approach, only event-by-event measurements of the total $γ$-ray energy released as a function of the total kinetic energy (TKE) of the fission fragments are performed, and no neutron detection is required. Using the $\texttt{CGMF}$ fission event generator, we illustrate the method and explore the accuracy of extracting the neutron multiplicity distribution wh…
The dynamics of low-energy induced fission is explored using a consistent microscopic framework that combines the time-dependent generator coordinate method (TDGCM) and time-dependent nuclear density functional theory (TDDFT). While the former presents a fully quantum mechanical approach that describes the entire fission process as an adiabatic evolution of collective degrees of freedom, the latter models the dissipative dynamics of the final stage of fission by propagating the nucleons independently toward scission and beyond. By combining the two methods, based on the same nuclear energy den…
We investigate the accuracy of several schemes to calculate ground-state correlation energies using the generator coordinate technique. Our test-bed for the study is the $sd$ interacting boson model, equivalent to a 6-level Lipkin-type model. We find that the simplified projection of a triaxial generator coordinate state using the $S_3$ subgroup of the rotation group is not very accurate in the parameter space of the Hamiltonian of interest. On the other hand, a full rotational projection of an axial generator coordinate state gives remarkable accuracy. We also discuss the validity of the simp…
We present a generator-coordinate method for realistic shell-model Hamiltonians that closely approximates the full shell model calculations of the matrix elements for the neutrinoless double-$β$ decay of $^{124}$Sn, $^{130}$Te, and $^{136}$Xe. We treat not only quadrupole deformations but also the proton-neutron pairing amplitudes as generator coordinates. We validate this method by calculating and comparing spectroscopic quantities with the exact shell model results and experimental data. Our Hamiltonian-based generator-coordinate method produces $0νββ$ matrix elements much closer to the shel…
Neutron- and proton-induced fission cross-sections of separated isotopes of tungsten (182W, 183W, 184W, and 186W) and natural tungsten relative to 209Bi have been measured in the incident nucleon energy region 50-200 MeV using fission chambers based on thin-film breakdown counters (TFBC) at quasi-monoenergetic neutrons from the 7Li(p,n) reaction and at the proton beams of The Svedberg Laboratory (TSL), Uppsala University (Uppsala, Sweden). The preliminary experimental data are presented in comparison with the recent data for nuclei in the lead-bismuth region, as well as with predictions by the…
We propose a consistent prescription for the derivation of the particle number and angular momentum projected QRPA (PQRPA) equation in the Generator Coordinate Method (GCM) framework for calculation of NME's of double-beta decay of axially deformed nuclei. We derive closed formulae for the calculation of excitation energies and wave functions of the intermediate nucleus.
In highly dissipative collisions between heavy ions, the optimal conditions to investigate different de-excitation channels of hot nuclei such as evaporation, fission or multifragmentation are well known. One crucial issue remains the excitation energy region where fission gives way to multifragmentation. In this paper, the onset of multi-fragment exit channels is investigated in terms of sequential fission. For the first time, the dynamical approach based on solving Langevin transport equations in multidimensional collective coordinate space is used to follow the de-excitation of highly excit…
In this work, we derived a transport equation based on a generalized equation of time-dependent generator coordinate method (TDGCM) under the Gaussian overlap approximation (GOA). The transport equation is obtained by using quantum-mechanics phase space distributions under a ``quasi-particle" picture and strategy of Bogoliubov-Born-Green-Kirkood-Yvon (BBGKY) hierarchy. The theoretical advantage of this transport equation is that time evolution of $s$-body phase space density distribution is coupled with $s+1$-body phase space density distributions, and thus, non-adiabatic effects and dynamical…
We treat proton-neutron pairing amplitudes, in addition to the nuclear deformation, as generator coordinates in a calculation of the neutrinoless double-beta decay of 76Ge. We work in two oscillator shells, with a Hamiltonian that includes separable terms in the quadrupole, spin-isospin, and pairing (isovector and isoscalar) channels. Our approach allows larger single-particle spaces than the shell model and includes the important physics of the proton-neutron quasiparticle random-phase approximation (QRPA) without instabilities near phase transitions. After comparing the results of a simplifi…
In peripheral high-energy heavy-ion collisions only parts of colliding nuclei interact leading to the production of a fireball. The remnants of such nuclei are called spectators. We estimated the excitation energy as a function of impact parameter. Their excitation energy is of the order of 100 MeV. The dynamical evolution of hot nuclei is described by solving a set of Langevin equations in four-dimensional collective coordinate space. The range of nuclear masses and excitation energies suits very well to ability of our model. Thus for the first time we investigate dynamically the fission and …
We present a mechanism to efficiently pre-select the number of intrinsic many-body states that are used to define the many-body wave functions within the discrete Generator Coordinate Method (GCM). This procedure, based on the proper definition of a natural basis of orthonormal states, does not require the evaluation of the non-diagonal Hamiltonian kernels to do the selection and helps to reduce the numerical instabilities. The performance of the method is analyzed in detail in the ground state and $0^{+}$ excited states of some selected nuclei computed with the Gogny energy density functional…
