arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2111.06100physics.ins-detastro-ph.IM
收藏

GAPS实验用大面积Si(Li)探测器的统计研究

Statistical investigation of the large-area Si(Li) detectors mass-produced for the GAPS experiment

M. Kozai, K. Tokunaga, H. Fuke, M. Yamada, C. J. Hailey, C. Kato, D. Kraych, M. Law, E. Martinez, K. Munakata, K. Perez, F. Rogers, N. Saffold, Y. Shimizu, K. Tokuda, M. Xiao

摘要:

为通用反粒子谱仪(GAPS)实验开发的锂漂移硅(Si(Li))探测器具有厚(~2.2 mm)的敏感层,大(10 cm)的直径,以及在相对较高的工作温度(约-40 ℃)下出色的能量分辨率(20-100 keV X射线约4 keV)。大批量生产的GAPS硅(锂)探测器已被执行,以构建一个大容量的硅跟踪器的GAPS。我们首次成功实现了大面积Si(Li)探测器的量产,成品率高达90%。在大规模生产过程中记录和收集了与探测器制造相关的有价值的数据集,例如探测器性能和制造参数。本研究使用统计方法分析数据集,目的是全面检查批量生产,并获得有价值的见解的制造方法。检测器和条带之间的性能参数(漏电流和电容)的足够均匀性被发现,表明高质量和稳定的批量生产。我们还搜索探测器性能和制造参数之间的相关性,通过使用数据挖掘技术。传统的多变量分析(多元回归分析)和机器学习技术(回归树分析)的互补使用,它被发现,锂漂移过程中作出了显着贡献的性能参数的成品检测器。详细调查的漂移过程中使用的环境数据,物理解释。我们的研究结果为这种大面积Si(Li)探测器的制造方法提供了有价值的见解,并鼓励未来需要大体积硅跟踪器的项目。

英文摘要:

The lithium-drifted silicon (Si(Li)) detector developed for the General Antiparticle Spectrometer (GAPS) experiment features a thick (~2.2 mm) sensitive layer, large (10 cm) diameter, and excellent energy resolution (~4 keV for 20-100 keV X-rays) at a relatively high operating temperature (approximately -40C). Mass production of GAPS Si(Li) detectors has been performed to construct a large-volume silicon tracker for GAPS. We achieved the first success of the mass production of large-area Si(Li) detectors with a high (~90%) yield rate. Valuable datasets related to detector fabrication, such as detector performance and manufacturing parameters, were recorded and collected during the mass production. This study analyzes the datasets using statistical methods with the aim of comprehensively examining the mass production and to gain valuable insight into the fabrication method. Sufficient uniformities of the performance parameters (leakage current and capacitance) between detectors and strips are found, demonstrating high-quality and stable mass production. We also search for correlations between detector performance and manufacturing parameters by using data-mining techniques. Conventional multivariate analysis (multiple regression analysis) and machine-learning techniques (regression tree analysis) are complementarily used, and it is found that the Li-drift process makes a significant contribution to the performance parameters of the finished detectors. Detailed investigation of the drift process is performed using environmental data, and physical interpretations are presented. Our results provide valuable insight into the fabrication methods for this kind of large-area Si(Li) detector, and encourages future projects that require large-volume silicon trackers.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑