Based on density functional theory (DFT), we investigate the electronic properties of bulk and single-layer ZrTe$_4$Se. The band structure of bulk ZrTe$_4$Se can produce a semimetal-to-topological insulator (TI) phase transition under uniaxial strain. The maximum global band gap is 0.189 eV at the 7\% tensile strain. Meanwhile, the Z$_2$ invariants (0; 110) demonstrate conclusively it is a weak topological insulator (WTI). The two Dirac cones for the (001) surface further confirm the nontrivial topological nature. The single-layer ZrTe$_4$Se is a quantum spin Hall (QSH) insulator with a band gap 86.4 meV and Z$_2$=1, the nontrivial metallic edge states further confirm the nontrivial topological nature. The maximum global band gap is 0.211 eV at the tensile strain 8\%. When the compressive strain is more than 1\%, the band structure of single-layer ZrTe$_4$Se produces a TI-to-semimetal transition. These theoretical analysis may provide a method for searching large band gap TIs and platform for topological nanoelectronic device applications.
We report an atomic-scale characterization of ZrTe$_5$ by using scanning tunneling microscopy. We observe a bulk bandgap of ~80 meV with topological edge states at the step edge, and thus demonstrate ZrTe$_5$ is a two dimensional topological insulator. It is also found that an applied magnetic field induces energetic splitting and spatial separation of the topological edge states, which can be attributed to a strong link between the topological edge states and bulk topology. The perfect surface steps and relatively large bandgap make ZrTe$_5$ be a potential candidate for future fundamental stu…
ZrTe$_5$ and HfTe$_5$ have attracted increasingly attention recently since the theoretical prediction of being topological insulators (TIs). However, subsequent works show many contradictions about their topological nature.Three possible phases, i.e. strong TI, weak TI, and Dirac semi-metal, have been observed in different experiments until now. Essentially whether ZrTe$_5$ or HfTe$_5$ has a band gap or not is still a question. Here, we present detailed first-principles calculations on the electronic and topological properties of ZrTe$_5$ and HfTe$_5$ on variant volumes and clearly demonstrate…
The complex electronic properties of $\mathrm{ZrTe_5}$ have recently stimulated in-depth investigations that assigned this material to either a topological insulator or a 3D Dirac semimetal phase. Here we report a comprehensive experimental and theoretical study of both electronic and structural properties of $\mathrm{ZrTe_5}$, revealing that the bulk material is a strong topological insulator (STI). By means of angle-resolved photoelectron spectroscopy, we identify at the top of the valence band both a surface and a bulk state. The dispersion of these bands is well captured by ab initio calcu…
A quantum spin Hall insulator hosts topological states at the one-dimensional edge, along which backscattering by nonmagnetic impurities is strictly prohibited and dissipationless current flows. Its 3D analogue, a weak topological insulator (WTI), possesses similar quasi-1D topological states confined at side surfaces of crystals. The enhanced confinement could provide a route for dissipationless current and better advantages for applications relative to the widely studied strong topological insulators. However, the topological side surface is usually not cleavable and is thus hard to observe …
We report $^{125}$Te NMR measurements of the topological quantum material ZrTe$_5$. Spin-lattice relaxation results, well-explained by a theoretical model of Dirac electron systems, reveal that the topological characteristic of ZrTe$_5$ is $T$-dependent, changing from weak topological insulator to strong topological insulator as temperature increases. Electronic structure calculations confirm this ordering, the reverse of what has been proposed. NMR results demonstrate a gapless Dirac semimetal state occurring at a Lifshitz transition temperature, $T_c=85$ K in our crystals. We demonstrate tha…
Although, the long-standing debate on the resistivity anomaly in ZrTe$_{5}$ somewhat comes to an end, the exact topological nature of the electronic band structure remains elusive till today. Theoretical calculations predicted that bulk ZrTe$_{5}$ to be either a weak or a strong three-dimensional (3D) topological insulator. However, the angle resolved photoemission spectroscopy and transport measurements clearly demonstrate 3D Dirac cone state with a small mass gap between the valence band and conduction band in the bulk. From the magnetization and magneto-transport measurements on ZrTe$_{5}$ …
Recently, ZrTe$_5$ has received a lot of attention as it exhibits various topological phases, such as weak and strong topological insulators, a Dirac semimetal, and a quantum spin Hall insulator in the monolayer limit. While most of studies have been focused on the three-dimensional bulk material, it is highly desired to obtain nanostructured materials due to their advantages in device applications. We report the synthesis and characterizations of ZrTe$_5$ nanoribbons. Via a silicon-assisted chemical vapor transport method, long nanoribbons with thickness as thin as 20 nm can be grown. The gro…
Integration of transition metal dichalcogenides (TMDs) on ferromagnetic materials (FM) may yield fascinating physics and promise for electronics and spintronic applications. In this work, high-temperature anomalous Hall effect (AHE) in the TMD ZrTe2 thin film using heterostructure approach by depositing it on ferrimagnetic insulator YIG (Y3Fe5O12, yttrium iron garnet) is demonstrated. In this heterostructure, significant anomalous Hall effect can be observed at temperatures up to at least 400 K, which is a record high temperature for the observation of AHE in TMDs, and the large RAHE is more t…
Quantum spin Hall (QSH) insulators, a new class of quantum matters, can support topologically protected helical edge modes inside bulk insulating gap, which can lead to dissipationless transport. A major obstacle to reach wide application of QSH is the lack of suitable QSH compounds, which should be easily fabricated and has large size of bulk gap. Here we predict that single layer ZrTe$_5$ and HfTe$_5$ are the most promising candidates to reach the large gap QSH insulators with bulk direct (indirect) band gap as large as 0.4 eV (0.1 eV), and robust against external strains. The 3D crystals of…
Two-dimensional (2D) topological insulators (TIs) with a large bulk band-gap are promising for experimental studies of the quantum spin Hall effect and for spintronic device applications. Despite considerable theoretical efforts in predicting large-gap 2D TI candidates, only few of them have been experimentally verified. Here, by combining scanning tunneling microscopy/spectroscopy and angle-resolved photoemission spectroscopy, we reveal that the top monolayer of ZrTe5 crystals hosts a large band gap of ~100 meV on the surface and a finite constant density-of-states within the gap at the step …
The identification of a non-trivial band topology usually relies on directly probing the protected surface/edge states. But, it is difficult to achieve electronically in narrow-gap topological materials due to the small (meV) energy scales. Here, we demonstrate that band inversion, a crucial ingredient of the non-trivial band topology, can serve as an alternative, experimentally accessible indicator. We show that an inverted band can lead to a four-fold splitting of the non-zero Landau levels, contrasting the two-fold splitting (spin splitting only) in the normal band. We confirm our predictio…
A new class of three-dimensional topological insulator, ternary rare earth chalcogenides, is theoretically investigated with ab initio calculations. Based on both bulk band structure analysis and the direct calculation of topological surface states, we demonstrate that LaBiTe3 is a topological insulator. La can be substituted by other rare earth elements, which provide candidates for novel topological states such as quantum anomalous Hall insulator, axionic insulator and topological Kondo insulator. Moreover, YBiTe3 and YSbTe3 are found to be normal insulators. They can be used as protecting b…
We study the effects of temperature on the topological nature of ZrTe$_5$, which sits near the phase boundary between strong and weak topological insulating orders. Using first-principles calculations, we show that the band gap and the topological indices of ZrTe$_5$ are extremely sensitive to thermal expansion, and that the electron-phonon interaction accounts for more than a third of the total temperature-dependent effects in ZrTe$_5$. We find that the temperature dependence of the band gap has an opposite sign in the strong and weak topological insulator phases. Based on this insight, we pr…
Here, we theoretically predict that the series of Pb-based layered chalcogenides, Pb$_n$Bi$_2$Se$_{n+3}$ and Pb$_n$Sb$_2$Te$_{n+3}$, are possible new candidates for topological insulators. As $n$ increases, the phase transition from a topological insulator to a band insulator is found to occur between $n=2$ and 3 for both series. Significantly, among the new topological insulators, we found a bulk band gap of 0.40eV in PbBi$_2$Se$_4$ which is one of the largest gap topological insulators, and that Pb$_2$Sb$_2$Te$_5$ is located in the immediate vicinity of the topological phase boundary, making…
We have performed a systematic high-momentum-resolution photoemission study on ZrTe$_5$ using $6$ eV photon energy. We have measured the band structure near the $Γ$ point, and quantified the gap between the conduction and valence band as $18 \leq Δ\leq 29$ meV. We have also observed photon-energy-dependent behavior attributed to final-state effects and the 3D nature of the material's band structure. Our interpretation indicates the gap is intrinsic and reconciles discrepancies on the existence of a topological surface state reported by different studies. The existence of a gap suggests that Zr…
Using Landau level spectroscopy, we determine the temperature dependence of the energy band gap in zirconium pentatelluride (ZrTe$_5$). We find that the band gap reaches $E_g=(5 \pm 1)$ meV at low temperatures and increases monotonously when the temperature is raised. This implies that ZrTe$_5$ is a weak topological insulator, with non-inverted ordering of electronic bands in the center of the Brillouin zone. Our magneto-transport experiments performed in parallel show that the resistivity anomaly in ZrTe$_5$ is not connected with the temperature dependence of the band gap.
The topological materials have attracted much attention recently. While three-dimensional topological insulators are becoming abundant, two-dimensional topological insulators remain rare, particularly in natural materials. ZrTe5 has host a long-standing puzzle on its anomalous transport properties; its underlying origin remains elusive. Lately, ZrTe5 has ignited renewed interest because it is predicted that single-layer ZrTe5 is a two-dimensional topological insulator and there is possibly a topological phase transition in bulk ZrTe5. However, the topological nature of ZrTe5 is under debate as…
Based on first-principles calculations, we have found a family of 2D transition-metal (TM) chalcogenides MX5 (M = Zr, Hf and X = S, Se and Te) can host quantum spin Hall (QSH) effect. The molecular dynamics simulation indicate that they are all thermal-dynamically stable at room temperature, the largest band gap is 0.19 eV. We have investigated MX5's electronic properties and found their properties are very similar. The single-layer ZrX5 are all gapless semimetals without consideration of spin-orbit coupling (SOC). The consideration of SOC will result in insulating phases with band gaps of 0.0…
We report the first experimental evidence for a strong electromechanical coupling in the Mott insulator GaTa4Se8 allowing a highly reproducible nano-writing with a Scanning Tunneling Microscope (STM). The local electric field across the STM junction is observed to have a threshold value above which the clean (100) surface of GaTa4Se8 becomes mechanically instable: At voltage biases V > 1.1V the surface suddenly inflates and comes in contact with the STM tip, resulting in nanometer size craters. The formed pattern can be indestructibly "read" by STM at lower voltage bias, thus allowing a 5 Tdot…
Quantum spin Hall (QSH) effect is promising for achieving dissipationless transport devices due to the robust gapless states inside insulating bulk gap. Here, by using first-principles calculations, we discover group-IV chalcogenide Si2Te2 film to be a 2D QSH insulator with a fundamental band gap of 0.29 eV, which is tunable under external strain. This nontrivial topological phase stems from band inversion between the Si-px,y and Te-px,y orbitals, demonstrated by a single pair of topologically protected helical edge states with Dirac point locating in the bulk gap. Notably, the characteristic …
Symmetry, dimensionality, and interaction are crucial ingredients for phase transitions and quantum states of matter. As a prominent example, the integer quantum Hall effect (QHE) represents a topological phase generally regarded as characteristic for two-dimensional (2D) electronic systems, and its many aspects can be understood without invoking electron-electron interaction. The intriguing possibility of generalizing QHE to three-dimensional (3D) systems was proposed decades ago, yet it remains elusive experimentally. Here, we report clear experimental evidence for the 3D QHE observed in bul…
Topological insulators (TIs) have been found in strained binary HgTe and ternary I-III-VI2 chalcopyrite compounds such as CuTlSe2 which have inverted band structures. However, the non-trivial band gaps of these existing binary and ternary TIs are limited to small values, usually around 10 meV or less. In this work, we reveal that a large non-trivial band gap requires the material having a large negative crystal field splitting $Δ_{CF}$ at top of the valence band and a moderately large negative $s-p$ band gap $E_g^{s-p}$. These parameters can be better tuned through chemical ordering in multina…
We predict a new class of three dimensional topological insulators in thallium-based III-V-VI$_2$ ternary chalcogenides, including TlBiQ$_2$ and TlSbQ$_2$ (Q = Te, Se and S). These topological insulators have robust and simple surface states consisting of a single Dirac cone at the $Γ$ point. The mechanism for topological insulating behavior is elucidated using both first principle calculations and effective field theory models. Remarkably, one topological insulator in this class, TlBiTe$_2$ is also a superconductor when doped with $p$-type carriers. We discuss the possibility that this materi…
We use first-principles methods to reveal that in ZrTe$_5$, a layered van der Waals material like graphite, atomic displacements corresponding to five of the six zone-center A$_g$ (symmetry-preserving) phonon modes can drive a topological phase transition from strong to weak topological insulator with a Dirac semimetal state emerging at the transition, giving rise to a Dirac topology surface in the multi-dimensional space formed by the A$_g$ phonon modes. This implies that the topological phase transition in ZrTe$_5$ can be realized with many different settings of external stimuli that are cap…
ZrTe$_5$ is a newly discovered topological material. Shortly after a single layer ZrTe$_5$ had been predicted to be a two-dimensional topological insulator, a handful of experiments have been carried out on bulk ZrTe$_5$ crystals, which however suggest that its bulk form may be a three-dimensional topological Dirac semimetal. We report the first transport study on ultra thin ZrTe$_5$ flakes down to 10 nm. A significant modulation of the characteristic resistivity maximum in the temperature dependence by thickness has been observed. Remarkably, the metallic behavior, occurring only below about …
Topological materials host robust properties, unaffected by microscopic perturbations, owing to the global topological properties of the bulk electron system. Materials in which the topological invariant can be changed by easily tuning external parameters are especially sought after. Zirconium pentatelluride (ZrTe$_5$) is one of a few experimentally available materials that reside close to the boundary of a topological phase transition, allowing the switching of its invariant by mechanical strain. Here, we unambiguously identify a topological insulator - metal transition as a function of strai…
We report on the quenching of single Ni adatom moments on Te-terminated Bi2Te2Se and Bi2Te3 topological insulator surfaces. The effect becomes manifested as a missing X-ray magnetic circular dichroism for resonant L3,2 transitions into partially filled Ni 3d states of occupancy n_d = 9.2. On the basis of a comparative study of Ni and Fe using scanning tunneling microscopy and ab initio calculations we are able to relate the element specific moment formation to a local Stoner criterion. While Fe adatoms form large spin moments of m_s = 2.54 mu_B with out-of-plane anisotropy due to a sufficientl…
Novel phases of matter with unique properties that emerge from quantum and topological protection present an important thrust of modern research. Of particular interest is to engineer these phases on demand using ultrafast external stimuli, such as photoexcitation, which offers prospects of their integration into future devices compatible with optical communication and information technology. Here, we use MeV Ultrafast Electron Diffraction (UED) to show how a transient three-dimensional (3D) Dirac semimetal state can be induced by a femtosecond laser pulse in a topological insulator ZrTe$_5$. …
The ultra-quantum limit is achieved when a magnetic field confines an electron gas in its lowest spin-polarised Landau level. Here we show that in this limit, electron doped ZrTe$_5$ shows a metal-insulator transition followed by a sign change of the Hall and Seebeck effects at low temperature. We attribute this transition to a magnetic freeze-out of charge carriers on the ionised impurities. The reduction of the charge carrier density gives way to an anomalous Hall response of the spin-polarised electrons. This behaviour, at odds with the usual magnetic freeze-out scenario, occurs in this Dir…
Binary bismuth chalcogenides Bi$_2$Se$_3$, Bi$_2$Te$_3$, and related materials are currently being extensively investigated as the reference topological insulators (TIs) due to their simple surface-state band dispersion (single Dirac cone) and relatively large bulk band gaps. Nanostructures of TIs are of particular interest as an increased surface-to-volume ratio enhances the contribution of surfaces states, meaning they are promising candidates for potential device applications. So far, the vast majority of research efforts have focused on the low-energy (0001) surfaces, which correspond to n…
Since the discovery of graphene, layered materials have attracted extensive interests owing to their unique electronic and optical characteristics. Among them, Dirac semimetal, one of the most appealing categories, has been a long-sought objective in layered systems beyond graphene. Recently, layered pentatelluride ZrTe5 was found to host signatures of Dirac semimetal. However, the low Fermi level in ZrTe5 strongly hinders a comprehensive understanding of the whole picture of electronic states through photoemission measurements, especially in the conduction band. Here, we report the observatio…
Metal and magnetic overlayers alter the surface of the topological insulator (TI) bismuth selenide (Bi$_2$Se$_3$) through proximity effects but also by changing the composition and chemical structure of the Bi$_2$Se$_3$ sub-surface. The interface between Bi$_2$Se$_3$ and Mn metal or manganese selenide was explored using x-ray photoelectron spectroscopy (XPS) revealing chemical and electronic changes at the interface. Depositing Mn metal on Bi$_2$Se$_3$ without an external source of Se shows unexpected bonding within the Mn layer due to Mn-Se bonding as Se diffuses out of the Bi$_2$Se$_3$ layer…
Band gap anomaly is a well-known issue in lead chalcogenides PbX (X=S, Se, Te, Po). Combining ab initio calculations and tight-binding (TB) method, we have studied the band evolution in PbX, and found that the band gap anomaly in PbTe is mainly related to the high onsite energy of Te 5s orbital and the large s-p hopping originated from the irregular extended distribution of Te 5s electrons. Furthermore, our calculations show that PbPo is an indirect band gap (6.5 meV) semiconductor with band inversion at L point, which clearly indicates that PbPo is a topological crystalline insulator (TCI). T…
The gap opening mechanism of a topological insulator, the quantum anomalous Hall effect and the axion physics are still pressing open questions and a microscopic viewpoint to further understand the role of magnetism in topology is highly desirable. In this work we have performed a microscopic investigation, by means of electron spin resonance (ESR) along with complementary bulk measurements, on the chalcogenide (Bi$_{1-x}$Gd$_{x}$)$_{2}$Se$_{3}$ ($x$ = 0, 0.001, 0.002 and 0.006). Our analysis of the Gd$^{3+}$ spin dynamics reveal no significant change of the Fermi surface as a function of Gd$^…
By means of a comprehensive theoretical investigation, we show that external pressure can induce topological phase transitions in IV-VI semiconducting chalcogenides with rock-salt structure. These materials satisfy mirror symmetries that are needed to sustain topologically protected surface states, at variance with time-reversal symmetry responsible for gapless edge states in $\mathcal{Z}_{2}$ topological insulators. The band inversions at high-symmetry points in the Brillouin zone that are related by mirror symmetry, are brought about by an "asymmetric" hybridization between cation and anion …
The discovery of strong topological insulators led to enormous activity in condensed matter physics and the discovery of new types of topological materials. Bisumth based chalcogenides are exemplary strong three dimensional topological insulators that host an odd number of massless Dirac fermionic states on all surfaces. A departure from this notion is the idea of a weak topological insulator, wherein only certain surface terminations host surface states characterized by an even number of Dirac cones leading to exciting new physics. Experimentally however, weak topological insulators have prov…
Chalcogenide superlattices (SL) consist of alternate stacking of GeTe and Sb$_{2}$Te$_{3}$ layers. The structure can become a 3D topological insulator depending on the constituent layer thicknesses, making the design of the SL period a central issue for advancing chalcogenide SL as potential candidates for spin devices as well as for optimization of the current generation of phase-change memory devices. Here we explore the periodic structure of chalcogenide SL by observing coherent folded longitudinal acoustic (FLA) phonons excited by femtosecond laser pulse irradiation. The peak frequency of …
We perform systematic angle-resolved photoemission spectroscopic measurements on the lead tin telluride Pb1-xSnxTe pseudobinary alloy system. We show that the (001) crystalline surface, which is a crystalline surface symmetric about the (110) mirror planes of the Pb1-xSnxTe crystal, pos- sesses four metallic surface states within its surface Brillouin zone. Our systematic Fermi surface and band topology measurements show that the observed Dirac-like surface states lie on the symmetric momentum-space cuts. We further show that upon going to higher electron binding energies, the surface states' …
Interface-Induced Superconductivity in Magnetic Topological Insulator-Iron Chalcogenide Heterostructures
The Pennsylvania State University（宾夕法尼亚州立大学）；Rutgers University（罗格斯大学）；University of Washington（华盛顿大学）；Chinese Academy of Sciences（中国科学院）；Materials Research Institute, The Pennsylvania State University（宾夕法尼亚州立大学材料研究所）；National High Magnetic Field Laboratory（国家高磁场实验室）；Paul Scherrer Institute（保罗谢尔研究所）；National Institute of Standards and Technology（美国国家标准与技术研究院）
We study an insulator-metal transition in a ternary chalcogenide glass (GeSe$_3$)$_{1-x}$Ag$_x$ for $x$=0.15 and 0.25. The conducting phase of the glass is obtained by using "Gap Sculpting" (Prasai et al, Sci. Rep. 5:15522 (2015)) and it is observed that the metallic and insulating phases have nearly identical DFT energies but have a conductivity contrast of ~10$^8$. The transition from insulator to metal involves growth of an Ag-rich phase accompanied by a depletion of tetrahedrally bonded Ge(Se$_{1/2}$)$_4$ in the host network. The relative fraction of the amorphous Ag$_2$Se phase and GeSe$_…
Here, we examine the influence of surface chemical reactivity toward ambient gases on the performance of nanodevices based on two-dimensional materials "beyond graphene" and novel topological phases of matter. While surface oxidation in ambient conditions was observed for silicene and phosphorene with subsequent reduction of the mobility of charge carriers, nanodevices with active channels of indium selenide, bismuth chalcogenides and transition-metal dichalcogenides are stable in air. However, air-exposed indium selenide suffers of p-type doping due to water decomposition on Se vacancies, whe…
Topological insulators (TIs) are promising for achieving dissipationless transport devices due to the robust gapless states inside the insulating bulk gap. However, currently realized 2D TIs, quantum spin Hall (QSH) insulators, suffer from ultra-high vacuum and extremely low temperature. Thus, seeking for desirable QSH insulators with high feasibility of experimental preparation and large nontrivial gap is of great importance for wide applications in spintronics. Based on the first-principles calculations, we predict a novel family of two-dimensional (2D) QSH insulators in transition-metal hal…
Identifying topological insulators and semimetals often focuses on their surface states, using spectroscopic methods such as angle-resolved photoemission spectroscopy or scanning tunneling microscopy. In contrast, studying the topological properties of topological insulators from their bulk-state transport is more accessible in most labs but seldom addressed. We show that, in the quantum limit of a topological insulator, the backscattering between the only two states on the Fermi surface of the lowest Landau band can be forbidden, at a critical magnetic field. The conductivity is determined so…
We predict a new family of robust two-dimensional (2D) topological insulators in van der Waals heterostructures comprising graphene and chalcogenides BiTeX (X=Cl, Br and I). The layered structures of both constituent materials produce a naturally smooth interface that is conducive to proximity induced new topological states. First principles calculations reveal intrinsic topologically nontrivial bulk energy gaps as large as 70-80 meV, which can be further enhanced up to 120 meV by compression. The strong spin-orbit coupling in BiTeX has a significant influence on the graphene Dirac states, res…
Two-dimensional (2D) topological insulators (TIs) have attracted tremendous research interest from both theoretical and experimental fields in recent years. However, it is much less investigated in realizing node line (NL) semimetals in 2D materials.Combining first-principles calculations and $k \cdot p$ model, we find that NL phases emerge in p-CS$_2$ and p-SiS$_2$, as well as other pentagonal IVX$_2$ films, i.e. p-IVX$_2$ (IV= C, Si, Ge, Sn, Pb; X=S, Se, Te) in the absence of spin-orbital coupling (SOC). The NLs in p-IVX$_2$ form symbolic Fermi loops centered around the $Γ$ point and are pro…
There is currently substantial effort being invested into creating efficient thermoelectric nanowires based on topological insulator chalcogenide-type materials. A key premise of these efforts is the assumption that the generally good thermoelectric properties that these materials exhibit in bulk form will translate into similarly good or even better thermoelectric performance of the same materials in nanowire form. Here, we calculate thermoelectric performance of topological insulator nanowires based on Bi2Te3, Sb2Te3 and Bi2Se3 as a function of diameter and Fermi level. We show that the ther…
BaSn$_2$ has been shown to form as layers of buckled stanene intercalated by barium ions~\cite{Kim_2008}. However, despite an apparently straightforward synthesis and significant interest in stanene as a topological material, BaSn$_2$ has been left largely unexplored, and has only recently been recognized as a potential topological insulator. Belonging to neither the lead nor bismuth chalcogenide families, it would represent a unique manifestation of the topological insulating phase. Here we present a detailed investigation of BaSn$_2$, using both {\it ab initio} and experimental methods. Firs…
Rock-salt chalcogenide SnTe represents the simplest realization of a topological insulator where a crystal symmetry allows for the appearence of topologically protected metallic states with an even number of Dirac cones on high-symmetry crystal surfaces. Related rock-salt lead chalcogenides have been predicted as well to undergo a phase-transition to a topological crystalline insulating phase after band inversion induced by alloying and pressure. Here we theoretically predict that strain, as realized in thin films grown on (001) substrates, may induce such topological phase-transitions. Furthe…
