In this letter, we consider the uplink of a cell-free Massive multiple-input multiple-output (MIMO) network where each user is decoded by a subset of access points (APs). An additional step is introduced in the cell-free Massive MIMO processing: each AP in the uplink locally implements soft MIMO detection and then shares the resulting bit log-likelihoods on the front-haul link. The decoding of the data is performed at the central processing unit (CPU), collecting the data from the APs. The non-linear processing at the APs consists of the approximate computation of the posterior density for each received data bit, exploiting only local channel state information. The proposed method offers good performance in terms of frame-error-rate and considerably lower complexity than the optimal maximum-likelihood demodulator.
In this paper, we solve the sum mean-squared error (MSE)-optimal 1-bit quantized precoding problem exactly for small-to-moderate sized multiuser multiple-input multiple-output (MU-MIMO) systems via branch and bound. To this end, we reformulate the original NP-hard precoding problem as a tree search and deploy a number of strategies that improve the pruning efficiency without sacrificing optimality. We evaluate the error-rate performance and the complexity of the resulting 1-bit branch-and-bound (BB-1) precoder, and compare its efficacy to that of existing, suboptimal algorithms for 1-bit preco…
In Massive MIMO base stations (BSs), the hardware design needs to balance high spectral efficiency (SE) with low complexity. The level of hardware impairments (HWIs) indicates how strong the signal distortion introduced by hardware imperfections is. In particular, the analog-to-digital converters (ADCs) have an important impact on signal distortion and power consumption. This article addresses the fundamental problem of selecting the optimal hardware quality in the Massive MIMO space. In particular, we examine the optimal HWI and ADC bit allocation per BS antenna to maximize the SE. The result…
Massive multiuser (MU) multiple-input multiple- output (MIMO) is foreseen to be a key technology in future wireless communication systems. In this paper, we analyze the downlink performance of an orthogonal frequency division multiplexing (OFDM)-based massive MU-MIMO system in which the base station (BS) is equipped with 1-bit digital-to-analog converters (DACs). Using Bussgang's theorem, we characterize the performance achievable with linear precoders (such as maximal-ratio transmission and zero forcing) in terms of bit error rate (BER). Our analysis accounts for the possibility of oversampli…
In this paper we investigate the achievable rate of LOS MIMO systems that use 1-bit quantization and spatial oversampling at the receiver. We propose that by using additional antennas at the receiver, the loss incurred due to the strong limitation of the quantization can be decreased. Mutual information results show that considerable rate gains can be achieved depending on the number and arrangement of the antennas. In some of the cases, even the full available rate from the transmitter can be attained. Furthermore, the results also reveal that two-dimensional antenna arrays can benefit more f…
This work investigates the downlink performance of a multi-cell massive multiple-input multiple-output (MIMO) system that employs one-bit analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) in the receiving and transmitting radio frequency (RF) chains at each base station (BS) in order to reduce the power consumption. We utilize Bussgang decomposition to derive the minimum mean squared error (MMSE) channel estimates at each BS based on the quantized received uplink training signals, and the asymptotic closed-form expressions of the achievable downlink rates under one-bi…
In this paper, we present a successive-cancellation-soft-output (SCSO) detector for an uplink multiuser multiple-input-multiple-output (MU-MIMO) system with one-bit analog-to-digital converters (ADCs). The proposed detector produces soft outputs (e.g., log-likelihood ratios (LLRs)) from one-bit quantized observations in a successive way: each user k's message is sequentially decoded from a channel decoder $k$ for $k=1,...,K$ in that order, and the previously decoded messages are exploited to improve the reliabilities of LLRs. Furthermore, we develop an efficient greedy algorithm to optimize a …
1-bit digital-to-analog (DACs) and analog-to-digital converters (ADCs) are gaining more interest in massive MIMO systems for economical and computational efficiency. We present a new precoding technique to mitigate the inter-user-interference (IUI) and the channel distortions in a 1-bit downlink MUMISO system with QPSK symbols. The transmit signal vector is optimized taking into account the 1-bit quantization. We develop a sort of mapping based on a look-up table (LUT) between the input signal and the transmit signal. The LUT is updated for each channel realization. Simulation results show a s…
Massive multi-user (MU) multiple-input multiple- output (MIMO) is widely believed to be a core technology for the upcoming fifth-generation (5G) wireless communication standards. The use of low-precision digital-to-analog converters (DACs) in MU-MIMO base stations is of interest because it reduces the power consumption, system costs, and raw baseband data rates. In this paper, we develop novel algorithms for downlink precoding in massive MU-MIMO systems with 1-bit DACs that support higher-order modulation schemes such as 8-PSK or 16-QAM. Specifically, we present low-complexity nonlinear precod…
In this letter, we investigate the downlink performance of massive multiple-input multiple-output (MIMO) systems where the base station is equipped with one-bit analogto-digital/digital-to-analog converters (ADC/DACs). Considering training-based transmission, we assume the base station (BS) employs the linear minimum mean-squared-error (LMMSE) channel estimator and treats the channel estimate as the true channel to precode the data symbols. We derive an expression for the downlink achievable rate for matched-filter (MF) precoding. A detailed analysis of the resulting power efficiency is pursue…
Quantized massive multiple-input-multiple-output (MIMO) systems are gaining more interest due to their power efficiency. We present a new precoding technique to mitigate the multi-user interference and the quantization distortions in a downlink multi-user (MU) multiple-input-single-output (MISO) system with 1-bit quantization at the transmitter. This work is restricted to PSK modulation schemes. The transmit signal vector is optimized for every desired received vector taking into account the 1-bit quantization. The optimization is based on maximizing the safety margin to the decision threshold…
We study the asymptotic outage performance of incremental redundancy automatic repeat request (INR-ARQ) transmission over the multiple-input multiple-output (MIMO) block-fading channels with discrete input constellations. We first show that transmission with random codes using a discrete signal constellation across all transmit antennas achieves the optimal outage diversity given by the Singleton bound. We then analyze the optimal SNR-exponent and outage diversity of INR-ARQ transmission over the MIMO block-fading channel. We show that a significant gain in outage diversity is obtained by prov…
We investigate massive multiple-input-multiple output (MIMO) uplink systems with 1-bit analog-to-digital converters (ADCs) on each receiver antenna. Receivers that rely on 1-bit ADC do not need energy-consuming interfaces such as automatic gain control (AGC). This decreases both ADC building and operational costs. Our design is based on maximal ratio combining (MRC), zero-forcing (ZF), and least squares (LS) detection, taking into account the effects of the 1-bit ADC on channel estimation. Through numerical results, we show good performance of the system in terms of mutual information and symb…
Analog-to-digital converters (ADCs) stand for a significant part of the total power consumption in a massive MIMO base station. One-bit ADCs are one way to reduce power consumption. This paper presents an analysis of the spectral efficiency of single-carrier and OFDM transmission in massive MIMO systems that use one-bit ADCs. A closed-form achievable rate, i.e., a lower bound on capacity, is derived for a wideband system with a large number of channel taps that employs low-complexity linear channel estimation and symbol detection. Quantization results in two types of error in the symbol detect…
Massive multiple-input multiple-output (MIMO) is a key technology for 5G wireless communications with a promise of significant capacity increase. The use of low-resolution data converters is crucial for massive MIMO to make the overall transmission as cost- and energy-efficient as possible. In this work, we consider a downlink millimeter-wave (mmWave) transmission scenario, where multiple users are served simultaneously by massive MIMO with one-bit digital-to-analog (D/A) converters. In particular, we propose a novel precoder design based on signal-to-leakage-plus-noise ratio (SLNR), which min…
We consider a downlink 1-bit quantized multiuser (MU) multiple-input-multiple-output (MIMO) system, where 1-bit digital-to-analog (DACs) and analog-to-digital converters (ADCs) are used at the transmitter and the receiver for economical and computational efficiency. We end up with a discrete memoryless channel with input and output vectors belonging to the QPSK constellation. In the context of massive (MIMO) systems the number of base station (BS) antennas is much larger than the number of receive antennas. This leads to high input cardinality of the channel. In this work we introduce a method…
Massive multiple-input multiple-output (MIMO) can improve the overall system performance significantly. Massive MIMO systems, however, may require a large number of radio frequency (RF) chains that could cause high cost and power consumption issues. One of promising approaches to resolve these issues is using low-resolution analog-to-digital converters (ADCs) at base stations. Channel estimation becomes a difficult task by using low-resolution ADCs though. This paper addresses the channel estimation problem for massive MIMO systems using one-bit ADCs when the channels are spatially and tempora…
The energy-optimal scheme is found for communicating one bit over a memoryless Gaussian channel with an ideal feedback channel. It is assumed that the channel is allowed to be used at most N times before decoding. The optimal coding/decoding strategy is derived by dynamic programming. It is found that feedback gives a significant performance gain and that the optimal strategies are discontinuous. It is also shown that most of the performance increase can be obtained even with a one-bit feedback channel. The optimal scheme is compared with the strategy by Kailath-Schalkwijk and is found to be s…
This paper considers channel estimation and achievable rates for the uplink of a massive multiple-input multiple-output (MIMO) system where the base station is equipped with one-bit analog-to-digital converters (ADCs). By rewriting the nonlinear one-bit quantization using a linear expression, we first derive a simple and insightful expression for the linear minimum mean-square-error (LMMSE) channel estimator. Then employing this channel estimator, we derive a closed-form expression for the lower bound of the achievable rate for the maximum ratio combiner (MRC) receiver. Numerical results are p…
In this paper, we investigate the capacity of massive multiple-input multiple-output (MIMO) systems corrupted by complex-valued additive white Gaussian noise (AWGN) when both the transmitter and the receiver employ 1-bit digital-to-analog converters (DACs) and 1-bit analog-to-digital-converters (ADCs). As a result of 1-bit DACs and ADCs, the transmitted and received symbols, as well as the transmit- and receive-side channel state information (CSI), are assumed to be quantized to 1-bit of information. The derived results show that the capacity of the considered massive MIMO system is $2N$ and $…
Massive multiple-input multiple-output (MIMO) has the potential to substantially improve the spectral efficiency, robustness and coverage of mobile networks. However, such potential is limited by hardware cost and power consumption associated with a large number of RF chains. Recently, one-bit quantization is proposed to address this issue by replacing high-resolution digital-to-analog converters (DACs) with one-bit DACs, thereby simplifying the RF chains. Despite low system cost, advanced signal processing techniques are needed to compensate for quantization distortions caused by low resoluti…
This paper addresses the problem of data detection for a massive Multiple-Input-Multiple-Output (MIMO) base station which utilizes 1-bit Analog-to-Digital Converters (ADCs) for quantizing the uplink signal. The existing literature on quantized massive MIMO systems deals with Cyclic Prefix (CP) transmission over frequency-selective channels. In this paper, we propose a computationally efficient block processing equalizer based on the Expectation Maximization (EM) algorithm in CP-free transmission for 1-bit quantized systems. We investigate the optimal block length and overlapping factor in rela…
We present a mathematical analysis of linear precoders for downlink massive MIMO multiuser systems that employ one-bit digital-to-analog converters at the basestation in order to reduce complexity and mitigate power usage. The analysis is based on the Bussgang theorem, and applies generally to any linear precoding scheme. We examine in detail the special case of the quantized zero-forcing (ZF) precoder, and derive a simple asymptotic expression for the resulting symbol error rate at each terminal. Our analysis illustrates that the performance of the quantized ZF precoder depends primarily on t…
This paper studies the problem of deciding on the absence (i.e., null hypothesis, $\mathcal{H}_0$) or presence (i.e., alternative hypothesis, $\mathcal{H}_1$) of an unknown signal embedded in the received signal in a multiple-input, multiple-output (MIMO) receiver, employing 1-bit quantization. The originality of our solution lies in quantizing the received signal by an adapted 1-bit window comparator, rather than a traditional 1-bit quantizer. This enables us to divide the space of observed binary sequences into two typical sets (w.r.t. the distribution of the no. of 1's in a sequence) asympt…
This paper considers a single-cell massive multiple-input multiple-output (MIMO) system equipped with a base station (BS) that uses one-bit quantization and investigates the energy efficiency (EE) and spectral efficiency (SE) trade-off. We first propose a new precoding scheme and downlink power allocation strategy that results in uplink-downlink SINR duality for one-bit MIMO systems. Taking into account the effect of the imperfect channel state information, we obtain approximate closed-form expressions for the uplink and downlink achievable rates under duality with maximum ratio combining/matc…
Millimeter wave (mmWave) systems operating over a wide bandwidth and using a large number of antennas impose a heavy burden on power consumption. In a massive multiple-input multiple-output (MIMO) uplink, analog-to-digital con- verters (ADCs) would be the primary consumer of power in the base station receiver. This paper proposes a bit allocation (BA) method for mmWave multi-user (MU) massive MIMO systems under a power constraint. We apply ADCs to the outputs of an analog phased array for beamspace projection to exploit mmWave channel sparsity. We relax a mean square quantization error (MSQE) …
Analog/digital hybrid precoder and combiner have been widely used in millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems due to its energy-efficient and economic superiorities. Infinite resolution of phase shifters (PSs) for the analog beamformer can achieve very close performance compared to the full-digital scheme but will result in high complexity and intensive power consumption. Thus, more cost effective and energy efficient low resolution PSs are typically used in practical mmWave MIMO systems. In this paper, we consider the joint hybrid precoder and combiner design wit…
This paper tackles the problem of single-user multiple-input multiple-output communication with 1-bit digital-to-analog and analog-to-digital converters. With the information-theoretic capacity as benchmark, the complementary strategies of beamforming and equiprobable signaling are contrasted in the regimes of operational interest, and the ensuing spectral efficiencies are characterized. Various canonical channel types are considered, with emphasis on line-of-sight settings under both spherical and planar wavefronts, respectively representative of short and long transmission ranges at mmWave a…
We propose a novel linear minimum-mean-squared-error (MMSE) precoder design for a downlink (DL) massive multiple-input-multiple-output (MIMO) scenario. For economical and computational efficiency reasons low resolution 1-bit digital-to-analog (DAC) and analog-to-digital (ADC) converters are used. This comes at the cost of performance gain that can be recovered by the large number of antennas deployed at the base station (BS) and an appropiate precoder design to mitigate the distortions due to the coarse quantization. The proposed precoder takes the quantization non-linearities into account and…
The fundamental limits of communication over multiple-input multiple-output (MIMO) networks are considered when a limited number of one-bit analog to digital converters (ADC) are used at the receiver terminals. Prior works have mainly focused on point-to-point communications, where receiver architectures consisting of a concatenation of an analog processing module, a limited number of one-bit ADCs with non-adaptive thresholds, and a digital processing module are considered. In this work, a new receiver architecture is proposed which utilizes adaptive threshold one-bit ADCs - where the ADC thre…
With bandwidths on the order of a gigahertz in emerging wireless systems, high-resolution analog-to-digital convertors (ADCs) become a power consumption bottleneck. One solution is to employ low resolution one-bit ADCs. In this paper, we analyze the flat fading multiple-input multiple-output (MIMO) channel with one-bit ADCs. Channel state information is assumed to be known at both the transmitter and receiver. For the multiple-input single-output channel, we derive the exact channel capacity. For the single-input multiple-output and MIMO channel, the capacity at infinite signal-to-noise ratio …
We propose sparsity-adaptive beamspace channel estimation algorithms that improve accuracy for 1-bit data converters in all-digital millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) basestations. Our algorithms include a tuning stage based on Stein's unbiased risk estimate (SURE) that automatically selects optimal denoising parameters depending on the instantaneous channel conditions. Simulation results with line-of-sight (LoS) and non-LoS mmWave massive MIMO channel models show that our algorithms improve channel estimation accuracy with 1-bit measurements in a computatio…
The use of low-resolution digital-to-analog converters (DACs) for transmit precoding provides crucial energy efficiency advantage for massive multiple-input multiple-output (MIMO) implementation. This paper formulates a quadrature amplitude modulation (QAM) constellation range and one-bit symbol-level precoding design problem for minimizing the average symbol error rate (SER) in downlink massive MIMO transmission. A tight upper-bound for SER with low-resolution DAC precoding is first derived. The derived expression suggests that the performance degradation of one-bit precoding can be interpret…
Communication systems with low-resolution analog-to-digital-converters (ADCs) can exploit channel state information at the transmitter and receiver. This paper presents codebook designs and performance analyses for limited feedback MIMO systems with finite-bit ADCs. A point-to-point single-user channel is firstly considered. When the received signal is sliced by 1-bit ADCs, the absolute phase at the receiver is important to align the phase of the received signals. A new codebook design for beamforming, which separately quantizes the channel direction and the residual phase, is therefore propos…
Multiple-antenna systems is a key technique to serve multiple users in future wireless systems. For low energy consumption and hardware complexity we first consider transmit symbols with constant magnitude and then 1-bit digital-to-analog converters. We propose precoding designs which maximize the minimum distance to the decision threshold at the receiver. The precoding design with 1-bit DAC corresponds to a discrete optimization problem, which we solve exactly with a branch-and-bound strategy. We alternatively present an approximation based on relaxation. Our results show that the proposed br…
We develop a broadband channel estimation algorithm for millimeter wave (mmWave) multiple input multiple output (MIMO) systems with few-bit analog-to-digital converters (ADCs). Our methodology exploits the joint sparsity of the mmWave MIMO channel in the angle and delay domains. We formulate the estimation problem as a noisy quantized compressed-sensing problem and solve it using efficient approximate message passing (AMP) algorithms. In particular, we model the angle-delay coefficients using a Bernoulli-Gaussian-mixture distribution with unknown parameters and use the expectation-maximization…
Adopting one-bit analog-to-digital convertors (ADCs) for massive multiple-input multiple-output (MIMO) implementations has great potential in reducing the hardware cost and power consumption. However, distortions caused by quantization raise great challenges. In MIMO orthogonal frequency-division modulation (OFDM) detection, coarse quantization renders the orthogonal separation among subcarriers inapplicable, forcing us to deal with a problem that has a very large problem size. In this paper we study the expectation-maximization (EM) approach for one-bit MIMO-OFDM detection. The idea is to ite…
In this paper, we derive a closed-form expression for the combiner of a multiple-input-multiple-output (MIMO) receiver equipped with a minimum-mean-square-error (MMSE) estimator. We propose using variable-bit-resolution analog-to- digital converters (ADC) across radio frequency (RF) paths. The combiner designed is a function of the quantization errors across each RF path. Using very low bit resolution ADCs (1-2bits) is a popular approach with massive MIMO receiver architectures to mitigate large power demands. We show that for certain channel conditions, adopting unequal bit resolution ADCs (e…
We present a novel iterative detection and decoding scheme for the uplink of large-scale multiuser multiple-antenna systems. In order to reduce the receiver's energy consumption and computational complexity, 1-bit analog-to-digital converters are used in the front-end. The performance loss due to the 1-bit quantization can be mitigated by using large-scale antenna arrays. We propose a linear low-resolution-aware minimum mean square error detector for soft multiuser interference mitigation. Moreover, short block length low-density parity-check codes are considered for avoiding high latency. In …
We consider timing and frequency synchronization for the massive multiuser (MU) multiple-input multiple-output (MIMO) downlink where 1-bit digital-to-analog converters (DACs) are used at the base station (BS). We focus on the practically relevant scenario in which orthogonal-frequency division multiplexing (OFDM) is used to communicate over frequency-selective channels. Our contributions are twofold. First, we use Bussgang's theorem to analyze the impact on performance caused by timing and frequency offsets in the presence of 1-bit DACs at the BS. Second, we demonstrate the efficacy of the wid…
This paper presents a low-complexity near-maximum-likelihood-detection (near-MLD) algorithm called one-bit-sphere-decoding for an uplink massive multiple-input multiple-output (MIMO) system with one-bit analog-to-digital converters (ADCs). The idea of the proposed algorithm is to estimate the transmitted symbol vector sent by uplink users (a codeword vector) by searching over a sphere, which contains a collection of codeword vectors close to the received signal vector at the base station in terms of a weighted Hamming distance. To reduce the computational complexity for the construction of the…
This paper considers training-based transmissions in massive multi-input multi-output (MIMO) systems with one-bit analog-to-digital converters (ADCs). We assume that each coherent transmission block consists of a pilot training stage and a data transmission stage. The base station (BS) first employs the linear minimum mean-square-error (LMMSE) method to estimate the channel and then uses the maximum-ratio combining (MRC) receiver to detect the data symbols. We first obtain an approximate closed-form expression for the uplink achievable rate in the low SNR region. Then based on the result, we i…
This letter investigates bit-interleaved coded multiple beamforming (BICMB) with perfect coding in millimeter-wave (mm-wave) massive multiple-input multiple-output (MIMO) systems to achieve both maximum diversity gain and multiplexing gain. Using perfect coding with BICMB enables us to do this. We show that by using BICMB and perfect coding, the diversity gain becomes independent from the number of transmitted data streams and the number of antennas in each remote antenna unit (RAU) at the transmitter and the receiver. The assumption is that the perfect channel state information (CSI) is known…
This work studies multiuser detection for one-bit massive multiple-input multiple-output (MIMO) systems in order to diminish the power consumption at the base station (BS). A low-complexity near-maximum-likelihood (nML) multiuser detection algorithm is designed, assuming that each BS antenna port is connected with a pair of single-bit resolution analog-to-digital converters (ADCs) and each user equipment (UE) transmits symbols from a quadrature amplitude modulation (QAM) constellation. First, a novel convex program is formulated as a convex surrogate of the ML detector and subsequently solved …
In this paper, we investigate learning-based maximum likelihood (ML) detection for uplink massive multiple-input and multiple-output (MIMO) systems with one-bit analog-to-digital converters (ADCs). To overcome the significant dependency of learning-based detection on the training length, we propose two one-bit ML detection methods: a biased-learning method and a dithering-and-learning method. The biased-learning method keeps likelihood functions with zero probability from wiping out the obtained information through learning, thereby providing more robust detection performance. Extending the bi…
This paper considers an uplink multiuser multiple-input-multiple-output (MU-MIMO) system with one-bit analog-to-digital converters (ADCs), in which $K$ users with a single transmit antenna communicate with one base station (BS) with $N_{\rm r}$ receive antennas. In this system, a novel MU-MIMO detection method, named weighted minimum distance (wMD) decoding, was recently proposed by introducing an equivalent coding problem. Despite of its attractive performance, the wMD decoding has the two limitations to be used in practice: i) the hard-decision outputs can degrade the performance of a channe…
We study an uplink multiuser multiple-input multiple-output (MU-MIMO) system with one-bit analog-to-digital converters (ADCs). For such system, a supervised-learning (SL) detector has been recently proposed by modeling a non-linear end-to-end system function into a parameterized Bernoulli-like model. Despite its attractive performance, the SL detector requires a large amount of labeled data (i.e., pilot signals) to estimate the parameters of the underlying model accurately. This is because the amount of the parameters grows exponentially with the number of users. To overcome this drawback, we …
This paper focuses on channel estimation for mmWave MIMO systems with 1-bit spatial sigma-delta analog-to-digital converters (ADCs). The channel estimation performance with 1-bit spatial sigma-delta ADCs depends on the quantization noise modeling. Therefore, we present a new method for modeling the quantization noise by leveraging the deterministic input-output relation of the 1-bit spatial sigma-delta ADC. Using this new noise model, we propose an algorithm for channel estimation for a narrowband single-user mmWave line-of-sight MIMO system by determining the unknown angles and path attenuati…
The space-time bit-interleaved coded modulation (ST-BICM) is an efficient technique to obtain high diversity and coding gain on a block-fading MIMO channel. Its maximum-likelihood (ML) performance is computed under ideal interleaving conditions, which enables a global optimization taking into account channel coding. Thanks to a diversity upperbound derived from the Singleton bound, an appropriate choice of the time dimension of the space-time coding is possible, which maximizes diversity while minimizing complexity. Based on the analysis, an optimized interleaver and a set of linear precoders,…
We investigate the information-theoretic throughout achievable on a fading communication link when the receiver is equipped with one-bit analog-to-digital converters (ADCs). The analysis is conducted for the setting where neither the transmitter nor the receiver have a priori information on the realization of the fading channels. This means that channel-state information needs to be acquired at the receiver on the basis of the one-bit quantized channel outputs. We show that least-squares (LS) channel estimation combined with joint pilot and data processing is capacity achieving in the single-u…
This paper investigates an uplink multiuser massive multiple-input multiple-output (MIMO) system with one-bit analog-to-digital converters (ADCs), in which $K$ users with a single-antenna communicate with one base station (BS) with $n_r$ antennas. In this system, we propose a novel MIMO detection framework, which is inspired by coding theory. The key idea of the proposed framework is to create a non-linear code $\Cc$ of length $n_r$ and rate $K/n_r$ using the encoding function that is completely characterized by a non-linear MIMO channel matrix. From this, a multiuser MIMO detection problem is…
We consider the problem of channel estimation for uplink multiuser massive MIMO systems, where, in order to significantly reduce the hardware cost and power consumption, one-bit analog-to-digital converters (ADCs) are used at the base station (BS) to quantize the received signal. Channel estimation for one-bit massive MIMO systems is challenging due to the severe distortion caused by the coarse quantization. It was shown in previous studies that an extremely long training sequence is required to attain an acceptable performance. In this paper, we study the problem of optimal one-bit quantizati…
Advances in analog-to-digital converter (ADC) technology have opened up the possibility to directly digitize wideband radio frequency (RF) signals, avoiding the need for analog down-conversion. In this work, we consider an orthogonal frequency-division multiplexing (OFDM)-based massive multi-user (MU) multiple-input multiple-output (MIMO) uplink system that relies on direct RF-sampling at the base station and digitizes the received RF signals with 1-bit ADCs. Using Bussgang's theorem, we provide an analytical expression for the error-vector magnitude (EVM) achieved by digital down-conversion a…
This paper addresses channel estimation and data equalization on frequency-selective 1-bit quantized Multiple Input-Multiple Output (MIMO) systems. No joint processing or Channel State Information is assumed at the transmitter, and therefore our findings are also applicable to the uplink of Multi-User MIMO systems. System models for both Orthogonal Division Frequency Multiplexing (OFDM) and single-carrier schemes are developed. A Cramér-Rao Lower Bound for the estimation problems is derived. The two nonlinear algorithms Expectation Maximization (EM) and Generalized Approximate Message Passing …
High resolution analog to digital converters (ADCs) are conventionally used at the receiver terminals to store an accurate digital representation of the received signal, thereby allowing for reliable decoding of transmitted messages. However, in a wide range of applications, such as communication over millimeter wave and massive multiple-input multiple-output (MIMO) systems, the use of high resolution ADCs is not feasible due to power budget limitations. In the conventional fully digital receiver design, where each receiver antenna is connected to a distinct ADC, reducing the ADC resolution le…
In massive multiple-input multiple-output (MIMO) systems, acquisition of the channel state information at the transmitter side (CSIT) is crucial. In this paper, a practical CSIT estimation scheme is proposed for frequency division duplexing (FDD) massive MIMO systems. Specifically, each received pilot symbol is first quantized to one bit per dimension at the receiver side and then the quantized bits are fed back to the transmitter. A joint one-bit compressed sensing algorithm is implemented at the transmitter to recover the channel matrices. The algorithm leverages the hidden joint sparsity st…
This paper considers the channel estimation problem for massive multiple-input multiple-output (MIMO) systems that use one-bit analog-to-digital converters (ADCs). Previous channel estimation techniques for massive MIMO using one-bit ADCs are all based on single-shot estimation without exploiting the inherent temporal correlation in wireless channels. In this paper, we propose an adaptive channel estimation technique taking the spatial and temporal correlations into account for massive MIMO with one-bit ADCs. We first use the Bussgang decomposition to linearize the one-bit quantized received s…
Coarsely quantized MIMO signalling methods have gained popularity in the recent developments of massive MIMO as they open up opportunities for massive MIMO implementation using cheap and power-efficient radio-frequency front-ends. This paper presents a new one-bit MIMO precoding approach using spatial Sigma-Delta ($ΣΔ$) modulation. In previous one-bit MIMO precoding research, one mainly focuses on using optimization to tackle the difficult binary signal optimization problem that arises from the precoding design. Our approach attempts a different route. Assuming angular MIMO channels, we apply …
