We propose a nonlinear reduced basis method for the efficient approximation of parametrized partial differential equations (PDEs), exploiting kernel proper orthogonal decomposition (KPOD) for the generation of a reduced-order space and neural networks for the evaluation of the reduced-order approximation. In particular, we use KPOD in place of the more classical POD, on a set of high-fidelity solutions of the problem at hand to extract a reduced basis. This method provides a more accurate approximation of the snapshots' set featuring a lower dimension, while maintaining the same efficiency as POD. A neural network (NN) is then used to find the coefficients of the reduced basis by following a supervised learning paradigm and shown to be effective in learning the map between the time/parameter values and the projection of the high-fidelity snapshots onto the reduced space. In this NN, both the number of hidden layers and the number of neurons vary according to the intrinsic dimension of the differential problem at hand and the size of the reduced space. This adaptively built NN attains good performances in both the learning and the testing phases. Our approach is then tested on two benchmark problems, a one-dimensional wave equation and a two-dimensional nonlinear lid-driven cavity problem. We finally compare the proposed KPOD-NN technique with a POD-NN strategy, showing that KPOD allows a reduction of the number of modes that must be retained to reach a given accuracy in the reduced basis approximation. For this reason, the NN built to find the coefficients of the KPOD expansion is smaller, easier and less computationally demanding to train than the one used in the POD-NN strategy.
Reduced order modeling (ROM) provides an efficient framework to compute solutions of parametric problems. Basically, it exploits a set of precomputed high-fidelity solutions --- computed for properly chosen parameters, using a full-order model --- in order to find the low dimensional space that contains the solution manifold. Using this space, an approximation of the numerical solution for new parameters can be computed in real-time response scenario, thanks to the reduced dimensionality of the problem. In a ROM framework, the most expensive part from the computational viewpoint is the calcula…
A proper orthogonal decomposition-based B-splines Bézier elements method (POD-BSBEM) is proposed as a non-intrusive reduced-order model for uncertainty propagation analysis for stochastic time-dependent problems. The method uses a two-step proper orthogonal decomposition (POD) technique to extract the reduced basis from a collection of high-fidelity solutions called snapshots. A third POD level is then applied on the data of the projection coefficients associated with the reduced basis to separate the time-dependent modes from the stochastic parametrized coefficients. These are approximated in…
This paper discusses a non-intrusive data-driven model order reduction method that learns low-dimensional dynamical models for a parametrized shallow water equation. We consider the shallow water equation in non-traditional form (NTSWE). We focus on learning low-dimensional models in a non-intrusive way. That means, we assume not to have access to a discretized form of the NTSWE in any form. Instead, we have snapshots that are obtained using a black-box solver. Consequently, we aim at learning reduced-order models only from the snapshots. Precisely, a reduced-order model is learnt by solving a…
Error estimates for POD-DL-ROMs: a deep learning framework for reduced order modeling of nonlinear parametrized PDEs enhanced by proper orthogonal decomposition
Surrogate-to-code verification of a non-intrusive POD-GPR machine-learning emulator of peak thermomechanical fields, with application to a carbon-carbon aircraft brake disc
organization= Independent Researcher , city= Paris , country= France
The use of reduced-order models (ROMs) in physics-based modeling and simulation almost always involves the use of linear reduced basis (RB) methods such as the proper orthogonal decomposition (POD). For some nonlinear problems, linear RB methods perform poorly, failing to provide an efficient subspace for the solution space. The use of nonlinear manifolds for ROMs has gained traction in recent years, showing increased performance for certain nonlinear problems over linear methods. Deep learning has been popular to this end through the use of autoencoders for providing a nonlinear trial manifol…
Deep learning-based reduced order models (DL-ROMs) have been recently proposed to overcome common limitations shared by conventional ROMs - built, e.g., exclusively through proper orthogonal decomposition (POD) - when applied to nonlinear time-dependent parametrized PDEs. In particular, POD-DL-ROMs can achieve extreme efficiency in the training stage and faster than real-time performances at testing, thanks to a prior dimensionality reduction through POD and a DL-based prediction framework. Nonetheless, they share with conventional ROMs poor performances regarding time extrapolation tasks. Thi…
Deep learning-based reduced order models (DL-ROMs) have been recently proposed to overcome common limitations shared by conventional reduced order models (ROMs) - built, e.g., through proper orthogonal decomposition (POD) - when applied to nonlinear time-dependent parametrized partial differential equations (PDEs). These might be related to (i) the need to deal with projections onto high dimensional linear approximating trial manifolds, (ii) expensive hyper-reduction strategies, or (iii) the intrinsic difficulty to handle physical complexity with a linear superimposition of modes. All these as…
This paper is concerned with the design of a non-intrusive model order reduction (MOR) for the system of parametric time-domain Maxwell equations. A time- and parameter-independent reduced basis (RB) is constructed by using a two-step proper orthogonal decomposition (POD) technique from a collection of full-order electromagnetic field solutions, which are generated via a discontinuous Galerkin time-domain (DGTD) solver. The mapping between the time/parameter values and the projection coefficients onto the RB space is approximated by a Gaussian process regression (GPR). Based on the data charac…
In this paper, a non-intrusive reduced-order model (ROM) for parametric reactor kinetics simulations is presented. Time-dependent ROMs are notoriously data intensive and difficult to implement when nonlinear multiphysics phenomena are considered. These challenges are exacerbated when parametric dependencies are included. The proper orthogonal decomposition mode coefficient interpolation (POD-MCI) ROM presented in this work can be constructed directly from lower-dimensional quantities of interest (QoIs) and is independent of the underlying model. This greatly alleviates the data requirement of …
A weighted POD-reduction approach for parametrized PDE-constrained Optimal Control Problems with random inputs and applications to environmental sciences
In recent years, numerical methods in industrial applications have evolved from a pure predictive tool towards a means for optimization and control. Since standard numerical analysis methods have become prohibitively costly in such multi-query settings, a variety of reduced order modeling (ROM) approaches have been advanced towards complex applications. In this context, the driving application for this work is twin-screw extruders (TSEs): manufacturing devices with an important economic role in plastics processing. Modeling the flow through a TSE requires non-linear material models and couplin…
This work presents a non-intrusive surrogate modeling scheme based on machine learning technology for predictive modeling of complex systems, described by parametrized time-dependent PDEs. For these problems, typical finite element approaches involve the spatiotemporal discretization of the PDE and the solution of the corresponding linear system of equations at each time step. Instead, the proposed method utilizes a convolutional autoencoder in conjunction with a feed forward neural network to establish a low-cost and accurate mapping from the problem's parametric space to its solution space. …
In this contribution, we coupled the isogeometric analysis to a reduced order modelling technique in order to provide a computationally efficient solution in parametric domains. In details, we adopt the free-form deformation method to obtain the parametric formulation of the domain and proper orthogonal decomposition with interpolation for the computational reduction of the model. This technique provides a real-time solution for any parameter by combining several solutions, in this case computed using isogeometric analysis on different geometrical configurations of the domain, properly mapped …
Projection-based model reduction has become a popular approach to reduce the cost associated with integrating large-scale dynamical systems so they can be used in many-query settings such as optimization and uncertainty quantification. For nonlinear systems, significant cost reduction is only possible with an additional layer of approximation to reduce the computational bottleneck of evaluating the projected nonlinear terms. Prevailing methods to approximate the nonlinear terms are code intrusive, potentially requiring years of development time to integrate into an existing codebase, and have …
In the present work, we investigate a cut finite element method for the parameterized system of second-order equations stemming from the splitting approach of a fourth order nonlinear geometrical PDE, namely the Cahn-Hilliard system. We manage to tackle the instability issues of such methods whenever strong nonlinearities appear and to utilize their flexibility of the fixed background geometry -- and mesh -- characteristic, through which, one can avoid e.g. in parametrized geometries the remeshing on the full order level, as well as, transformations to reference geometries on the reduced level…
Reduced order methods for parametrized non-linear and time dependent optimal flow control problems, towards applications in biomedical and environmental sciences
Traditional reduced order modeling techniques such as the reduced basis (RB) method (relying, e.g., on proper orthogonal decomposition (POD)) suffer from severe limitations when dealing with nonlinear time-dependent parametrized PDEs, because of the fundamental assumption of linear superimposition of modes they are based on. For this reason, in the case of problems featuring coherent structures that propagate over time such as transport, wave, or convection-dominated phenomena, the RB method usually yields inefficient reduced order models (ROMs) if one aims at obtaining reduced order approxima…
Recent advances in the field of machine learning open a new era in high performance computing. Applications of machine learning algorithms for the development of accurate and cost-efficient surrogates of complex problems have already attracted major attention from scientists. Despite their powerful approximation capabilities, however, surrogates cannot produce the `exact' solution to the problem. To address this issue, this paper exploits up-to-date ML tools and delivers customized iterative solvers of linear equation systems, capable of solving large-scale parametrized problems at any desired…
