We demonstrate a method to double the collection efficiency in Laser Tweezers Raman Spectroscopy (LTRS) by collecting both the forward and back-scattered light in a single-shot multitrack measurement. Our method can collect signals at different sample volumes, granting both the pinpoint spatial selectivity of confocal Raman and the bulk sensitivity of non-confocal Raman simultaneously. Further, we display that our approach allows for reduced detector integration time and laser power. Thus, our method will enable the monitoring of biological samples sensitive to high intensities for longer times. Additionally, we demonstrate that by a simple modification, we can add polarization sensitivity and retrieve extra biochemical information.
A double nanohole in a metal film was used to trap nanoparticles (20 nm diameter) and simultaneously record their Raman spectrum using the trapping laser as the excitation source. This allowed for the identification of characteristic Stokes lines for titania and polystyrene nanoparticles, showing the capability for material identification of nanoparticles once trapped. Increased Raman signal is observed for the trapping of multiple nanoparticles. This system combines the benefits of nanoparticle isolation and manipulation with unique identification.
We provide a detailed account of the construction of a system of holographic optical tweezers. While much information is available on the design, alignment and calibration of other optical trapping configurations, those based on holography are relatively poorly described. Inclusion of a spatial light modulator in the setup gives rise to particular design trade-offs and constraints, and the system benefits from specific optimization strategies, which we discuss.
Conical refraction occurs when a beam of light travels through an appropriately cut biaxial crystal. By focussing the conically refracted beam through a high numerical aperture microscope objective, conical refraction optical tweezers can be created, allowing for particle manipulation in both Raman spots and in the Lloyd/Poggendorff rings. We present a thorough quantification of the trapping properties of such a beam, focussing on the trap stiffness and how this varies with trap power and trapped particle location. We show that the lower Raman spot can be thought of as a single-beam optical gr…
A setup is proposed to enhance tracking of very small particles, by using optical tweezers embedded within a Sagnac interferometer. The achievable signal-to-noise ratio is shown to be enhanced over that for a standard optical tweezers setup. The enhancement factor increases asymptotically as the interferometer visibility approaches 100%, but is capped at a maximum given by the ratio of the trapping field intensity to the detector saturation threshold. For an achievable visibility of 99%, the signal-to-noise ratio is enhanced by a factor of 200, and the minimum trackable particle size is 2.4 ti…
The design and implementation of a multiplexed spiral phase mask in an experimental optical tweezer setup are presented. This diffractive optical element allows the generation of multiple concentric vortex beams with independent topological charges. The generalization of the phase mask for multiple concentric vortices is also shown. The design for a phase mask of two multiplexed vortices with different topological charges is developed. We experimentally show the transfer of angular momentum to the optically trapped microparticles by enabling orbiting dynamics around the optical axis independen…
We have constructed a counterpropagating optical tweezers setup embedded in a Sagnac interferometer in order to increase the sensitivity of position tracking for particles in the geometrical optics regime. Enhanced position determination using a Sagnac interferometer has previously been described theoretically by Taylor et al. [Journal of Optics 13, 044014 (2011)] for Rayleigh-regime particles trapped in an antinode of a standing wave. We have extended their theory to a case of arbitrarily-sized particles trapped with orthogonally-polarized counterpropagating beams. The working distance of the…
Cosmic dust plays a dominant role in the universe, especially in the formation of stars and planetary systems. Furthermore, the surface of cosmic dust grains is the bench-work where molecular hydrogen and simple organic compounds are formed. We manipulate individual dust particles in water solution by contactless and non-invasive techniques such as standard and Raman tweezers, to characterize their response to mechanical effects of light (optical forces and torques) and to determine their mineral compositions. Moreover, we show accurate optical force calculations in the T-matrix formalism high…
We present an optical nanotrapping setup that exhibits enhanced efficiency, based on localized plasmonic fields around sharp metallic features. The substrates consist of laser-structured silicon wafers with quasi-ordered microspikes on the surface, coated with a thin silver layer. The resulting optical traps show orders of magnitude enhancement of the trapping force and the effective quality factor.
We demonstrate a lock-in particle tracking scheme in optical tweezers based on stroboscopic modulation of an illuminating optical field. This scheme is found to evade low frequency noise sources while otherwise producing an equivalent position measurement to continuous measurement. This was demonstrated, and found to yield on average 20dB of noise suppression in the frequency range 10-5000 Hz, where low frequency laser noise and electronic noise was significant, and 35 dB of noise suppression in the range 550-710 kHz where laser relaxation oscillations introduced laser noise. The setup is simp…
We demonstrate and characterize the transfer of a levitating silica nanosphere between two optical tweezers, at low pressure. Both optical traps are mounted on the heads of optical fibers and placed on translation stages in vacuum chambers. Our setup allows to physically separate the particle loading environment from the experimental chamber, where the second tweezer can position the particle inside a high Finesse optical cavity. The separation prevents from spoiling the cavity mirrors and the chamber cleanliness during the particle loading phase. Our system provides a very reliable and simply…
We demonstrate that tight focusing of a circularly polarized Gaussian beam in optical tweezers leads to spin-momentum locking - with the transverse spin angular momentum density being independent of helicity, while the transverse momentum (Poynting vector) becomes helicity dependent. Our theoretical calculations, numerical simulations, and experiments reveal that the presence of a stratified medium in the path of the trapping beam significantly enhances the magnitude of transverse momentum in the radial direction with respect to the beam axis, and likewise, also leads to high off-axial intensi…
Aiming at absolute force calibration of optical tweezers, following a critical review of proposed theoretical models, we present and test the results of MDSA (Mie-Debye-Spherical Aberration) theory, an extension of a previous (MD) model, taking account of spherical aberration at the glass/water interface. This first-principles theory is formulated entirely in terms of experimentally accessible parameters (none adjustable). Careful experimental tests of the MDSA theory, undertaken at two laboratories, with very different setups, are described. A detailed description is given of the procedures e…
Current optical manipulation techniques rely on carefully engineered setups and samples. Although similar conditions are routinely met in research laboratories, it is still a challenge to manipulate microparticles when the environment is not well controlled and known a priori, since optical imperfections and scattering limit the applicability of this technique to real-life situations, such as in biomedical or microfluidic applications. Nonetheless, scattering of coherent light by disordered structures gives rise to speckles, random diffraction patterns with well-defined statistical properties.…
We present a novel experimental setup in which magnetic and optical tweezers are combined for torque and force transduction onto single filamentous molecules in a transverse configuration to allow simultaneous mechanical measurement and manipulation. Previously we have developed a super-resolution imaging module which in conjunction with advanced imaging techniques such as Blinking assisted Localisation Microscopy (BaLM) achieves localisation precision of single fluorescent dye molecules bound to DNA of ~30 nm along the contour of the molecule; our work here describes developments in producing…
We propose to use optical tweezers to probe the Casimir interaction between microspheres inside a liquid medium for geometric aspect ratios far beyond the validity of the widely employed proximity force approximation. This setup has the potential for revealing unprecedented features associated to the non-trivial role of the spherical curvatures. For a proof of concept, we measure femtonewton double layer forces between polystyrene microspheres at distances above $400$ nm by employing very soft optical tweezers, with stiffness of the order of fractions of a fN/nm. As a future application, we pr…
We consider the implementation of quantum logic gates in trapped ions using tightly focused optical tweezers. Strong polarization gradients near the tweezer focus lead to qubit-state dependent forces on the ion. We show that these may be used to implement quantum logic gates on pairs of ion qubits in a crystal. The qubit-state dependent forces generated by this effect live on the plane perpendicular to the direction of propagation of the laser beams opening new ways of coupling to motional modes of an ion crystal. The proposed gate does not require ground state cooling of the ions and does not…
Dynamic control of compact chip-scale contactless manipulation of particles for bioscience applications remains a challenging endeavor, which is restrained by the balance between trapping efficiency and scalable apparatus. Metasurfaces offer the implementation of feasible optical tweezers on a planar platform for shaping the exerted optical force by a microscale-integrated device. Here, we design and experimentally demonstrate a highly efficient silicon-based metalens for two-dimensional optical trapping in the near-infrared. Our metalens concept is based on the Pancharatnam-Berry phase, which…
A non-invasive, in-situ calibration method for Total Internal Reflection Microscopy (TIRM) based on optical tweezing is presented which greatly expands the capabilities of this technique. We show that by making only simple modifications to the basic TIRM sensing setup and procedure, a probe particle's absolute position relative to a dielectric interface may be known with better than 10 nm precision out to a distance greater than 1 $μ$m from the surface. This represents an approximate 10x improvement in error and 3x improvement in measurement range over conventional TIRM methods. The technique'…
We put forward an enantioselective method for chiral nanoparticles using optical tweezers. We demonstrate that the optical trapping force in a typical, realistic optical tweezing setup with circularly-polarized trapping beams is sensitive to the chirality of core-shell nanoparticles, allowing for efficient enantioselection. It turns out that the handedness of the trapped particles can be selected by choosing the appropriate circular polarization of the trapping beam. The chirality of each individual trapped nanoparticle can be characterized by measuring the rotation of the equilibrium position…
Model-Based Real-Time Synthesis of Acousto-Optically Generated Laser-Beam Patterns and Tweezer Arrays
Technische Universität Darmstadt（达姆施塔特工业大学）；Helmholtz Forschungsakademie Hessen für FAIR (HFHF), GSI Helmholtzzentrum für Schwerionenforschung（黑森FAIR赫尔霍兹研究学院，GSI重离子研究中心）
Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force and torque measurement at the femtonewton level, microrheology of complex fluids, single micro- and nanoparticle spectroscopy, single-cell analysis, and statistical-physics experiments. This roadmap p…
A commercial single laser line Raman spectrometer is modified to accommodate multiline and tunable dye lasers, thus combining the high sensitivity of such single monochromator systems with broadband operation. Such instruments rely on high-throughput interference filters that perform both beam alignment and Rayleigh filtering. Our setup separates the dual task of the built-in monochromator into two independent elements: a beam splitter and a long pass filter. Filter rotation shifts the transmission passband, effectively expanding the range of operation. Rotation of the filters has a negligible…
This work presents the first optical trapping experimental demonstration of micro-particles with Frozen Waves. Frozen Waves are an efficient method to model longitudinally the intensity of non-diffracting beams obtained by superposing co-propagating Bessel beams with the same frequency and order. The experimental setup of a holographic optical tweezers using spatial light modulators has been assembled and optimized. We investigate the optical force distribution acting on micro-particles of two types of Frozen Waves.The results show that it is possible to obtain greater stability for optical tr…
Raman spectroscopy is an appealing technique that probes molecular vibrations in a wide variety of materials with virtually no sample preparation. However, accurate and reliable Raman measurements are still a challenge and require more robust and practical calibration methods. We demonstrate the implementation of a simple low-cost continuous-wave stimulated Raman spectroscopy scheme for accurate and high-resolution spectroscopy. We perform shot noise limited continuous-wave stimulated Raman scattering (cwSRS) as well as continuous-wave coherent anti-Stokes Raman scattering (cwCARS) on polystyr…
Raman sensing and Raman microscopy are amongst the most specific optical technologies to identify the chemical compounds of unknown samples, and to enable label-free biomedical imaging with molecular contrast. However, the high cost and complexity, low speed, and incomplete spectral information provided by current technology are major challenges preventing more widespread application of Raman systems. To overcome these limitations, we developed a new method for stimulated Raman spectroscopy and Raman imaging using continuous wave (CW), rapidly wavelength swept lasers. Our all-fiber, time-encod…
Technical University of Denmark（丹麦技术大学）；Politecnico di Torino（都灵理工大学）
We experimentally validate a real-time machine learning framework, capable of controlling the pump power values of Raman amplifiers to shape the signal power evolution in two-dimensions (2D): frequency and fiber distance. In our setup, power values of four first-order counter-propagating pumps are optimized to achieve the desired 2D power profile. The pump power optimization framework includes a convolutional neural network (CNN) followed by differential evolution (DE) technique, applied online to the amplifier setup to automatically achieve the target 2D power profiles. The results on achieva…
We demonstrate sensitive high-resolution stimulated Raman measurements of hydrogen using a hollow-core photonic crystal fiber (HC-PCF). The Raman transition is pumped by a narrow linewidth (<50 kHz) 1064 nm continuous-wave (CW) fiber laser. The probe light is produced by a homebuilt CW optical parametric oscillator (OPO), tunable from around 800 nm to 1300 nm (linewidth ~ 5 MHz). These narrow linewidth lasers allow for an excellent spectral resolution of approximately 10^-4 cm^(-1). The setup employs a differential measurement technique for noise rejection in the probe beam, which also elimina…
We optically trap freestanding single metallic chiral nanoparticles using a standing-wave optical tweezer. We also incorporate within the trap a polarimetric setup that allows to perform in situ chiral recognition of single enantiomers. This is done by measuring the S_3 component of the Stokes vector of a light beam scattered off the trapped nanoparticle in the forward direction. This unique combination of optical trapping and chiral recognition, all implemented within a single setup, opens new perspectives towards the control, recognition, and manipulation of chiral objects at nanometer scale…
We report the efficient and fast ($\sim 2\mathrm{Hz}$) preparation of randomly loaded 1D chains of individual $^{87}$Rb atoms and of dense atomic clouds trapped in optical tweezers using a new experimental platform. This platform is designed for the study of both structured and disordered atomic systems in free space. It is composed of two high-resolution optical systems perpendicular to each other, enhancing observation and manipulation capabilities. The setup includes a dynamically controllable telescope, which we use to vary the tweezer beam waist. A D1 $Λ$-enhanced gray molasses enhances t…
This work presents an application that generates real-time holograms to be displayed on a holographic optical tweezers setup; a technique that allows the manipulation of particles in the range from micrometres to nanometres. The software is written in Java, and uses random binary masks to generate the holograms. It allows customization of several parameters that are dependent on the experimental setup, such as the specific characteristics of the device displaying the hologram, or the presence of aberrations. We evaluate the software's performance and conclude that real-time interaction is achi…
Nonresonant optomechanical control of structural phases
Stanford University（斯坦福大学）；SLAC National Accelerator Laboratory（SLAC国家加速器实验室）；University of Washington（华盛顿大学）；University of Central Florida（中佛罗里达大学）；RWTH Aachen University（亚琛工业大学）；Forschungszentrum Jülich GmbH（于利希研究中心有限公司）；Argonne National Laboratory（阿贡国家实验室）
Raman spectroscopy is one of the key techniques in the study of vibrational modes and molecular structures. In Coherent Anti-Stokes Raman Scattering (CARS) spectroscopy, a molecular vibrational spectrum is resolved via the third-order nonlinear interaction of pump, Stokes and probe photons, typically using a complex experimental setup with multiple beams and laser sources. Although CARS has become a widespread technique for label-free chemical imaging and detection of contaminants, its multi-source, multi-beam experimental implementation is challenging. In this work we present a simple and eas…
We describe the application of Raman Optical-fiber Amplification (ROA) for the phase coherent transfer of optical frequencies in an optical fiber link. ROA uses the transmission fiber itself as a gain medium for bi-directional coherent amplification. In a test setup we evaluated the ROA in terms of on-off gain, signal-to-noise ratio, and phase noise added to the carrier. We transferred a laser frequency in a 200 km optical fiber link with an additional 16 dB fixed attenuator (equivalent to 275 km of fiber on a single span), and evaluated both co-propagating and counter-propagating amplificatio…
We demonstrate coherent anti-Stokes Raman scattering (CARS) microscopy in a wide-field setup with nanosecond laser pulse excitation. In contrast to confocal setups, the image of a sample can be recorded with a single pair of excitation pulses. For this purpose the excitation geometry is specially designed in order to satisfy the phase matching condition over the whole sample area. The spectral, temporal and spatial sensitivity of the method is demonstrated by imaging test samples, i.e. oil vesicles in sunflower seeds, on a nanosecond timescale. The method provides snapshot imaging in 3 nanosec…
Time-resolved femtosecond stimulated Raman spectroscopy (FSRS) is a powerful tool for investigating ultrafast structural and vibrational dynamics in light absorbing systems. However, the technique generally requires exposing a sample to high laser pulse fluences and long acquisition times to achieve adequate signal-to-noise ratios. Here, we describe a timeresolved FSRS instrument built around a Yb ultrafast amplifier operating at 200 kHz, and address some of the unique challenges that arise at high repetition-rates. The setup includes detection with a 9 kHz CMOS camera and an improved dual-cho…
By focusing on a typical emitting wavelength of 1120 nm as an example, we present the first demonstration of a high-efficiency, narrow-linewidth kilowatt-level all-fiber amplifier based on hybrid ytterbium-Raman (Yb-Raman) gains. Notably, two temporally stable, phase-modulated single-frequency lasers operating at 1064 nm and 1120nm, respectively, were applied in the fiber amplifier, to alleviate the spectral broadening of the 1120 signal laser and suppress the stimulated Brillouin scattering (SBS) effect simultaneously. Over 1 kW narrow-linewidth 1120 nm signal laser was obtained with a slope …
The ability to identify the contents of a sealed container, without the need to extract a sample, is desirable in applications ranging from forensics to product quality control. One technique suited to this is inverse spatially offset Raman spectroscopy (ISORS) which illuminates a sample of interest with an annular beam of light and collects Raman scattering from the centre of the ring, thereby retrieving the chemical signature of the contents while suppressing signal from the container. Here we explore in detail the relative benefits of a recently developed variant of ISORS, called focus-matc…
Strain engineering in semiconductor transistor devices has become vital in the semiconductor industry due to the ever increasing need for performance enhancement at the nanoscale. Raman spectroscopy is a non-invasive measurement technique with high sensitivity to mechanical stress that does not require any special sample preparation procedures in comparison to characterization involving transmission electron microscopy (TEM), making it suitable for inline strain measurement in the semiconductor industry. Indeed at present, strain measurements using Raman spectroscopy are already routinely carr…
The gas circulation loop LOOPINO has been set up and commissioned at Tritium Laboratory Karlsruhe (TLK) to perform Raman measurements of circulating tritium mixtures under conditions similar to the inner loop system of the neutrino-mass experiment KATRIN, which is currently under construction. A custom-made interface is used to connect the tritium containing measurement cell, located inside a glove box, with the Raman setup standing on the outside. A tritium sample (purity > 95%, 20 kPa total pressure) was circulated in LOOPINO for more than three weeks with a total throughput of 770 g of trit…
The controlled transfer of nuclear state population using two x-ray laser pulses is investigated theoretically. The laser pulses drive two nuclear transitions in a nuclear three-level system facilitating coherent population transfer via the quantum optics technique of stimulated Raman adiabatic passage. To overcome present limitations of the x-ray laser frequency, we envisage accelerated nuclei interacting with two copropagating or crossed x-ray laser pulses in a three-beam setup. We present a systematic study of this setup providing both pulse temporal sequence and laser pulse intensity for o…
