We provide a detailed account of the construction of a system of holographic optical tweezers. While much information is available on the design, alignment and calibration of other optical trapping configurations, those based on holography are relatively poorly described. Inclusion of a spatial light modulator in the setup gives rise to particular design trade-offs and constraints, and the system benefits from specific optimization strategies, which we discuss.
How far a particle moves along the optical axis in a holographic optical trap is not simply dictated by the programmed motion of the trap, but rather depends on an interplay of the trap's changing shape and the particle's material properties. For the particular case of colloidal spheres in optical tweezers, holographic video microscopy reveals that trapped particles tend to move farther along the axial direction than the traps that are moving them and that different kinds of particles move by different amounts. These surprising and sizeable variations in axial placement can be explained by a d…
In this work, we present the experimental optical trap of microparticles with an Airy beams array using a holographic optical tweezers. The Airy beams array are attractive for optical manipulation of particles owing to their non--diffracting and autofocusing properties. An Airy beams array is composed of N Airy beams which accelerate mutually and symmetrically in opposite direction, for different ballistic trajectories, that is, with different initial launch angles. Based on this, we developed a holographic optical tweezers system for the generation of non-diffracting beams and with it, we inv…
Optical transport networks for active absorbing microparticles are made with holographic optical tweezers. The particles are powered by the optical potentials that make the network and transport themselves via random vapor propelled hops to different traps without the requirement for external forces or microfabricated barriers. The geometries explored for the optical traps are square lattices, circular arrays and random arrays. The degree distribution for the connections or possible paths between the traps are localized like in the case of random networks. The commute times to travel across $n…
A spatial light modulator (SLM) and a pair of galvanometer-mounted mirrors (GMM) were combined into an optical tweezers set-up. This provides great flexibility as the SLM creates an array of traps which can be moved smoothly and quickly with the GMM. To optimise performance, the effect of the incidence angle on the SLM with respect to phase and intensity response was investigated. Although it is common to use the SLM at an incidence angle of 45 degrees, smaller angles give a full 2pi phase shift and an output intensity which is less dependent on the magnitude of the phase shift. The traps were…
Cooling and trapping of atoms by light has enabled one to build and manipulate quantum systems at the single atom level. Such a bottom-up approach becomes one of the fascinating challenges toward scalable and highly controllable quantum systems, e.g., a large-scale quantum information machine. Their implementation requires crucial pre-requisites: scalablity, site distinguishability, and reliable single-atom loading into sites. The widely adopted methods satisfies the two former conditions relatively well, but the last condition, filling single atoms onto individual sites, relies mostly on the …
The increasing number of applications for holographic manipulation techniques has sparked the development of more accessible control interfaces. Here, we describe a holographic optical tweezers experiment that is controlled by gestures which are detected by a Microsoft Kinect. We demonstrate that this technique can be used to calibrate the tweezers using the Stokes Drag method and compare this to automated calibrations. We also show that multiple particle manipulation can be handled. This is a promising new line of research for gesture-based control that could find applications in a wide varie…
Since the discovery of graphene, its excellent physical properties has greatly improved the performance of many optoelectronic devices and brought important technological revolution to optical research and application. Here, we introduce graphene into the field of optical tweezers technology and demonstrate a new thermoelectric optical tweezers technology based on graphene. This technology can not only reduce the incident light energy by 2 orders of magnitude (compared with traditional optical tweezers), but also bring new advantages such as much broader working bandwidth and larger working ar…
The intensity distribution of a holographically-projected optical trap can be tailored to the physical properties of the particles it is intended to trap. Dynamic optimization is especially desirable for manipulating dark-seeking particles that are repelled by conventional optical tweezers, and even more so when dark-seeking particles coexist in the same system as light-seeking particles. We address the need for dexterous manipulation of dark-seeking particles by introducing a class of "dark" traps created from the superposition of two out-of-phase Gaussian modes with different waist diameters…
In this work, we present the computational simulations of holographic metasurfaces to generation of the optical non-diffracting beams. The metasurfaces are designed by the holographic technique and the computer-generated holograms (CGHs) of optical non-diffracting beams are generated computationally. These holographic metasurfaces (HMS) are obtained by modeling a periodic lattice of metallic patches on dielectric substrates with sub-wavelength dimensions, where each one of those unit cells change the phase of the incoming wave. We use the surface impedance (Z) to control the phase of the elect…
In this work, we optically trapping microparticles with higher order Frozen Wave using holographic optical tweezers. Frozen Waves are diffraction resistant optical beams, obtained by superposing copropagating Bessel beams with the same frequency and order, obtaining efficient modeling of its shape. Based on this, we developed a holographic optical tweezers system for the generation of Frozen Waves and with this, it was possible to create traps in a stable way for the trapping and guiding of the microparticles in the transverse plane. The experimental results show that it is possible to obtain …
Optical tweezers can manipulate tiny particles. However, the distortion caused by the scattering medium restricts the applications of optical tweezers. Wavefront shaping techniques including the transmission matrix (TM) method are powerful tools to achieve light focusing behind the scattering medium. In this paper, we propose a new kind of TM, named intensity transmission matrix (ITM). Only relying on the intensity distribution, we can calculate the ITM with only about 1/4 measurement time of the widely used four-phase method. Meanwhile, ITM method can avoid the energy loss in diffraction intr…
This work presents the first optical trapping experimental demonstration of micro-particles with Frozen Waves. Frozen Waves are an efficient method to model longitudinally the intensity of non-diffracting beams obtained by superposing co-propagating Bessel beams with the same frequency and order. The experimental setup of a holographic optical tweezers using spatial light modulators has been assembled and optimized. We investigate the optical force distribution acting on micro-particles of two types of Frozen Waves.The results show that it is possible to obtain greater stability for optical tr…
Plasmonic nano-optical tweezers enable the non-invasive manipulation of nano-objects under low illumination intensities, and have become a powerful tool for nanotechnology and biophysics. However, measuring the trap stiffness of nanotweezers remains a complicated task, which hinders the development of plasmonic trapping. Here, we describe an experimental method to measure the trap stiffness based on the temporal correlation of the fluorescence from the trapped object. The method is applied to characterize the trap stiffness in different double nanohole apertures and explore the influence of th…
A new method to generate and control the amplitude and phase distributions of a optical vortex beam is proposed. By introducing a holographic grating on top of the dielectric waveguide, the free space vortex beam and the in-plane guiding wave can be converted to each other. This microscale holographic grating is very robust against the variation of geometry parameters. The designed vortex beam generator can produce the target beam with a fidelity up to 0.93, and the working bandwidth is about 175 nm with the fidelity larger than 0.80. In addition, a multiple generator composed of two holograph…
Holographic optical tweezers can be applied to manipulate microscopic particles in arbitrary optical patterns, which classical optical tweezers cannot do. This ability relies on accurate computer-generated holography (CGH), yet most CGH techniques can only shape the intensity profiles while the phase distributions are random. Here, we introduce a new method for fast generation of holograms that allows for simultaneously shaping both the intensity and phase distributions of light. The method uses a discrete inverse Fourier transform formula to directly calculate a hologram in one step, in which…
Holographic optical tweezers are used to construct a static bistable optical potential energy landscape where a Brownian particle experiences restoring forces from two nearby optical traps and undergoes thermally activated transitions between the two energy minima. Hydrodynamic coupling between two such systems results in their partial synchronisation. This is interpreted as an emergence of higher mobility pathways, along which it is easier to overcome barriers to structural rearrangement.
Trapping of microspheres with a single focused laser beam is usually limited to materials with relative refractive indexes slightly larger than one. We show that directional light scattering can be employed to optically trap high-index materials. For this purpose, we propose a material platform to achieve zero backward scattering (ZBS), also known as the first Kerker condition, in a composite media containing spherical inclusions of silica embedded in a SiC microsphere. By tuning the volume filling fraction of inclusions and the microsphere radius, stable trapping can be achieved, provided tha…
This work presents an application that generates real-time holograms to be displayed on a holographic optical tweezers setup; a technique that allows the manipulation of particles in the range from micrometres to nanometres. The software is written in Java, and uses random binary masks to generate the holograms. It allows customization of several parameters that are dependent on the experimental setup, such as the specific characteristics of the device displaying the hologram, or the presence of aberrations. We evaluate the software's performance and conclude that real-time interaction is achi…
We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach to first obtain the necessary aperture fields, which can then be converted to a polarizability distribution using equivalence principles. To achieve this ideal distribution, the polarizability of each …
