As the photovoltaic sector approaches 1 TW in cumulative installed capacity, we provide an overview of the current challenges to achieve further technological improvements. On the raw materials side, we see no fundamental limitation to expansion in capacity of the current market technologies, even though basic estimates predict that the PV sector will become the largest consumer of Ag in the world after 2030. On the other hand, recent market data on PV costs indicates that the largest cost fraction is now infrastructure and area-related, and nearly independent of the core cell technology. Therefore, additional value adding is likely to proceed via an increase in energy yield metrics such as the power density and/or efficiency of the PV module. However, current market technologies are near their fundamental detailed balance efficiency limits. The transition to multijunction PV in tandem configurations is regarded as the most promising path to surpass this limitation and increase the power per unit area of PV modules. So far, each specific multijunction concept faces particular obstacles that have prevented their upscaling, but the field is rapidly improving. In this review work, we provide a global comparison between the different types of multijunction concepts, including III-Vs, Si-based tandems and the emergence of perovskite/Si devices. Coupled with analyses of new notable developments in the field, we discuss the challenges common to different multijunction cell architectures, and the specific challenges of each type of device, both on a cell level and on a module integration level. From the analysis, we conclude that several tandem concepts are nearing the disruption level where a breakthrough into mainstream PV is possible.
A Simultaneous Synergistic Protection Mechanism in Hybrid Perovskite-Organic Multi-junctions Enables Long-Term Stable and Efficient Tandem Solar Cells
Helmholtz-Institute Erlangen-Nürnberg for Renewable Energy (HI ERN)(亥姆霍兹埃尔朗根-纽伦堡可再生能源研究所);Institute of Energy Materials and Devices (IMD-3), Forschungszentrum Jülich GmbH(于利希研究中心能源材料与器件研究所);Institute of Micro- and Nanostructure Research & Center for Nanoanalysis and Electron Microscopy (CENEM), Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)(埃尔朗根-纽伦堡大学微纳结构研究与纳米分析及电子显微镜中心);International Laser Centre SCSTI(国际激光中心);Department Interface Design, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB)(柏林亥姆霍兹材料能源中心界面设计系);Energy Materials In-situ Laboratory Berlin (EMIL), Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB)(柏林亥姆霍兹材料能源中心能源材料原位实验室);Erlangen Graduate School in Advanced Optical Technologies (SAOT)(埃尔朗根高级光学技术研究生院);Institute of Medical Technology, Health Science Center, Peking University(北京大学医学部医疗技术研究所);Institute of Polymer Optoelectronic Materials & Devices, Guangdong Basic Research Center of Excellence for Energy & Information Polymer Materials, State Key Laboratory of Luminescent Materials & Devices, South China University of Technology(华南理工大学发光材料与器件国家重点实验室聚合物光电子材料与器件研究所)
Origin of the voltage gap and recombination losses in all-perovskite tandem solar cells
National Institute of Standards and Technology(美国国家标准与技术研究院);Ralph S O’Connor Sustainable Energy Institute, Johns Hopkins University(约翰斯·霍普金斯大学拉尔夫·S·奥康纳可持续能源研究所);The University of Toledo(托莱多大学);Johns Hopkins University(约翰斯·霍普金斯大学)
Integrating transfer matrix method into SCAPS-1D for addressing optical losses and per-layer optical properties in perovskite/Silicon tandem solar cells
Divergent Solid-state Conversion Pathways in Evaporated All-perovskite Tandem Solar Cells
Empa – Swiss Federal Laboratories for Materials Science and Technology(瑞士联邦材料科学与技术研究院);Zurich University of Applied Sciences(苏黎世应用科学大学);ETH Zürich(苏黎世联邦理工学院)