arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1801.08498physics.app-ph
收藏

CZT(S,Se)单结和串联结太阳能电池的模拟研究,以实现高达22%的更高效率

Simulation studies of CZT(S,Se) single and tandem junction solar cells towards possibilities for higher efficiencies up to 22%

Goutam K Gupta, Ambesh Dixit

摘要:

利用一维太阳电池电容模拟器(SCAPS-1D)对Cu 2 ZnSnS 4和Cu 2 ZnSnSe 4吸收层的单异质结太阳电池的光伏特性进行了数值模拟。n-CdS/ZnO双缓冲层用于与吸收层的异质结构界面。电池性能的变化,如厚度,载流子浓度,缺陷密度等不同的材料层的属性进行了研究。性能优化的单结太阳能电池与Mo作为背接触材料的功函数为5 eV。双结CZTS/CZTSe叠层电池结构的实现保持相同的材料特性中所使用的单CZTS和CZTSe太阳能电池模拟,并考虑在界面处的平带条件。在匹配顶部和底部子电池的当前条件之后确定串联电池性能。对于电流匹配的211.33 nm厚CZTS顶部电池连同2000 nm底部电池,CZTS/CZTSe短路电流密度为~ 20.98 mA/cm 2。当开路电压约为1.324 V时,在接触处的平带条件下获得的最大效率约为21.7%。

英文摘要:

We simulated photovoltaic characteristics of single heterojunction solar cell with Cu2ZnSnS4 and Cu2ZnSnSe4 absorber layer numerically using one dimensional solar cell capacitance simulator (SCAPS-1D). n-CdS/ZnO double buffer layer is used for hetrostructure interfaces with the absorber layer. The cell performance is investigated against variation of different material layer properties such as thickness, carrier concentration, defect density etc. The performance is optimized first for the single junction solar cell with Mo as back contact material with work function 5 eV. A double junction CZTS/CZTSe tandem cell structure is realized keeping the same material properties as is used in the single CZTS and CZTSe solar cell simulation and considering the flat band condition at the interface. Tandem cell performance is determined after matching the current condition for top and bottom sub-cells. The CZTS/CZTSe short circuit current density is ~ 20.98 mA/cm2 for current matched 211.33 nm thick CZTS top cell in conjunction with 2000 nm bottom cell. The maximum efficiency obtained under the flat band condition at the contact is ~21.7% with open circuit voltage ~1.324 V.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑