基于CdSe-CuSbSe2的双结两端串联太阳能电池的设计与优化:开路电压超过2.0 V且光电转换效率超过42%
Design and optimization of CdSe-CuSbSe2-based double-junction two-terminal tandem solar cells with VOC> 2.0 V and PCE over 42%
AI总结:
该研究通过SCAPS-1D优化CdSe-CuSbSe2双结两端串联太阳能电池,实现42.64%效率、2.09 V开路电压,为全硫族化物高性能光伏器件提供重要参考。
摘要:
本文展示了使用SCAPS-1D模拟的基于CdSe-CuSbSe2的双结两端串联太阳能电池。通过优化窗口层、顶部吸收层、CdSe(带隙1.7 eV)、底部吸收层、CuSbSe2(带隙1.08 eV)以及背表面层的电学和光学特性,确认了串联电池的最高性能。此外,详细研究了不同参数(如厚度、掺杂、不同层的缺陷密度)的影响。在优化条件下,所建模的CdSe-CuSbSe2双结两端串联太阳能电池显示出显著的效率42.64%,开路电压为2.09 V,短路电流密度为24.09 mA/cm2,填充因子为84.36%。这些结果对未来构建基于全硫族化物的高性能串联光伏电池极为有利。
英文摘要:
In this article, we demonstrate CdSe-CuSbSe2-based double junction two-terminal tandem solar cells simulated with SCAPS-1D. The highest performance of the tandem cell has been confirmed by optimizing the electrical and optical properties of window, top absorber, CdSe (bandgap 1.7 eV), bottom absorber, CuSbSe2 (bandgap 1.08 eV) and back surface layers. In addition, the effect of different parameters such as thickness, doping, defect density of different layers has been investigated in details. With the optimized condition, the modeled CdSe-CuSbSe2 double-junction two-terminal tandem solar cell displays the noticeable efficiency of 42.64% with open circuit voltage of 2.09 V, short circuit current density of 24.09 mA/cm2 and fill factor of 84.36%, respectively. These results are highly propitious for the construction of all-chalcogenide based high performance tandem photovoltaic cells in the future.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。