arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2102.08825cond-mat.stat-mechphysics.flu-dyn
收藏

决定相变过程中界面温度的热力学原理

The thermodynamic principle determining the interface temperature during phase change

Tom Y. Zhao, Neelesh A. Patankar

AI总结:

本文针对相变过程中界面温度不确定的问题,提出基于界面熵产生的从头算热力学原理,通过最大熵产生确定相变速率和界面温度,成功解释了偏离饱和值超过50%的实验结果及超过15摄氏度的温度跳跃。

摘要:

相变(例如从液体到蒸汽)过程中的界面温度是多少?这一问题至今仍未从根本上得到解决。在无相变的传热问题建模中,温度和热流连续条件可以得出界面温度。然而,在存在相变的问题中,热流条件被用来确定发生相变的质量量,这使得界面温度变得不确定,除非施加额外的条件。沸腾建模中一种常见的做法是假设界面根据界面处某种压力度量达到饱和温度。即使在界面两侧存在显著温度梯度和质量输运的高度非平衡情形下,这一假设通常仍被采用。本文基于界面处的熵产生,引入了一个从头算的热力学原理,该原理在非平衡情形下完全确定了相应的温度。从物理上看,该热力学原理通过将质量通量与相应的界面熵产生率联系起来,为可能发生的相变速率空间提供了一个理论极限;更进一步地,本文提出了一个更强的论断:具有足够自由度的系统会选择最大熵产生,从而给出观测到的相变速率以及相应的界面性质。该熵原理能够捕捉到界面温度的实验值和计算值,这些值可能偏离假定的饱和值超过50%。该原理还解释了界面处的温度跳跃(不连续性),其差值可以超过15摄氏度。研究发现,这一热力学原理能够恰当地补全相变问题。

英文摘要:

What is the interface temperature during phase transition (for instance, from liquid to vapor)? This question remains fundamentally unresolved. In the modeling of heat transfer problems with no phase change, the temperature and heat flux continuity conditions lead to the interface temperature. However, in problems with phase change, the heat flux condition is used to determine the amount of mass changing phase. This makes the interface temperature indeterminate unless an additional condition is imposed. A common approach in the modeling of boiling is to assume that the interface attains the saturation temperature according some measure of pressure at the interface. This assumption is usually applied even under highly non-equilibrium scenarios where significant temperature gradients and mass transport occur across the interface. In this work, an ab-initio thermodynamic principle is introduced based on the entropy production at the interface that fully specifies the associated temperature under non-equilibrium scenarios. Physically, the thermodynamic principle provides a theoretical limit on the space of possible phase change rates that can occur by associating the mass flux with a corresponding interfacial entropy production rate; a stronger statement is made that a system with sufficient degrees of freedom selects the maximum entropy production, giving the observed phase change rate and associated interface properties. This entropic principle captures experimental and computational values of the interface temperature that can deviate by over $50\%$ from the assumed saturation values. It also accounts for temperature jumps (discontinuities) at the interface whose difference can exceed 15 degrees Celcius. This thermodynamic principle is found to appropriately complete the phase change problem.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑