Safety Analysis for Laser-based Optical Wireless Communications: A Tutorial
Mohammad Dehghani Soltani, Elham Sarbazi, Nikolaos Bamiedakis, Priyanka de Souza, Hossein Kazemi, Jaafar M. H. Elmirghani, Ian H. White, Richard V. Penty, Harald Haas, Majid Safari
Light amplification by stimulated emission of radiation (laser) sources have many advantages for use in high data rate optical wireless communications. In particular, the low cost and high-bandwidth properties of laser sources such as vertical-cavity surface-emitting lasers (VCSELs) make them attractive for future indoor optical wireless communications. In order to be integrated into future indoor networks, such lasers should conform to eye safety regulations determined by the international electrotechnical commission (IEC) standards for laser safety. In this paper, we provide a detailed study of beam propagation to evaluate the received power of various laser sources, based on which as well as the maximum permissible exposure (MPE) defined by the IEC 60825-1:2014 standard, we establish a comprehensive framework for eye safety analyses. This framework allows us to calculate the maximum allowable transmit power, which is crucial in the design of a reliable and safe laser-based wireless communication system. Initially, we consider a single-mode Gaussian beam and calculate the maximum permissible transmit power. Subsequently, we generalize this approach for higher-mode beams. It is shown that the M-squared-based approach for analysis of multimode lasers ensures the IEC eye safety limits, however, in some scenarios, it can be too conservative compared to the precise beam decomposition method. Laser safety analyses with consideration of optical elements such as lens and diffuser, as well as for VCSEL array have been also presented. Skin safety, as another significant factor of laser safety, has also been investigated in this paper. We have studied the impacts of various parameters such as wavelength, exposure duration and the divergence angle of laser sources on the safety analysis by presenting insightful results.
The use of flying platforms such as unmanned aerial vehicles (UAVs), popularly known as drones, is rapidly growing. In particular, with their inherent attributes such as mobility, flexibility, and adaptive altitude, UAVs admit several key potential applications in wireless systems. On the one hand, UAVs can be used as aerial base stations to enhance coverage, capacity, reliability, and energy efficiency of wireless networks. On the other hand, UAVs can operate as flying mobile terminals within a cellular network. Such cellular-connected UAVs can enable several applications ranging from real-ti…
The wireless revolution has already started with the specified vision, overall objectives, and the first official 3GPP release of 5th generation (5G) wireless networks. Despite the development of several modern communication technologies, since the beginning of the modern era of digital communications, we have been mostly conveying information by altering the amplitude, the phase, or the frequency of sinusoidal carrier signals, which has inherent drawbacks. On the other hand, index modulation (IM) provides an alternative dimension to transmit digital information: the indices of the correspondi…
Optical wireless communication (OWC) using intensity-modulation and direct-detection (IM/DD) has a channel model which possesses unique features, due to the constraints imposed on the channel input. The aim of this tutorial is to overview results on the capacity of IM/DD channels with input-independent Gaussian noise as a model of OWC channels. It provides the reader with an entry point to the topic, and highlights some major contributions in this area. It begins with a discussion on channel models and how this IM/DD Gaussian channel model comes about, in addition to an explanation of input co…
University of Macau（澳门大学）；National University of Singapore（新加坡国立大学）
Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal prorogation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be effi…
In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. Because one the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference caused by an IBFD node's own transmissions to its desired receptions, this tutorial surveys a wide range of IBFD self-interference mitigation techniq…
Unmanned aerial vehicle (UAV)-enabled wireless power transfer (WPT) has recently emerged as a promising technique to provide sustainable energy supply for widely distributed low-power ground devices (GDs) in large-scale wireless networks. Compared with the energy transmitters (ETs) in conventional WPT systems which are deployed at fixed locations, UAV-mounted aerial ETs can fly flexibly in the three-dimensional (3D) space to charge nearby GDs more efficiently. This paper provides a tutorial overview on UAV-enabled WPT and its appealing applications, in particular focusing on how to exploit UAV…
This paper presents a tutorial on stochastic geometry (SG) based analysis for cellular networks. This tutorial is distinguished by its depth with respect to wireless communication details and its focus on cellular networks. The paper starts by modeling and analyzing the baseband interference in a basic cellular network model. Then, it characterizes signal-to-interference-plus-noise-ratio (SINR) and its related performance metrics. In particular, a unified approach to conduct error probability, outage probability, and rate analysis is presented. Although the main focus of the paper is on cellul…
Beijing University of Posts and Telecommunications（北京邮电大学）；The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳））；Princeton University（普林斯顿大学）；The University of Edinburgh（爱丁堡大学）；Virginia Tech（弗吉尼亚理工大学）；Huawei France R & D（华为法国研发中心）
Next-generation wireless networks must support ultra-reliable, low-latency communication and intelligently manage a massive number of Internet of Things (IoT) devices in real-time, within a highly dynamic environment. This need for stringent communication quality-of-service (QoS) requirements as well as mobile edge and core intelligence can only be realized by integrating fundamental notions of artificial intelligence (AI) and machine learning across the wireless infrastructure and end-user devices. In this context, this paper provides a comprehensive tutorial that introduces the main concepts…
Spatial stochastic models have been much used for performance analysis of wireless communication networks. This is due to the fact that the performance of wireless networks depends on the spatial configuration of wireless nodes and the irregularity of node locations in a real wireless network can be captured by a spatial point process. Most works on such spatial stochastic models of wireless networks have adopted homogeneous Poisson point processes as the models of wireless node locations. While this adoption makes the models analytically tractable, it assumes that the wireless nodes are locat…
Over the last decade, simultaneous wireless information and power transfer (SWIPT) has become a practical and promising solution for connecting and recharging battery-limited devices, thanks to significant advances in low-power electronics technology and wireless communications techniques. To realize the promised potentials, advanced resource allocation design plays a decisive role in revealing, understanding, and exploiting the intrinsic rate-energy tradeoff capitalizing on the dual use of radio frequency (RF) signals for wireless charging and communication. In this paper, we provide a compre…
The remarkable promise of multiple-input multiple-output (MIMO) wireless channels has motivated an intense research activity to characterize the theoretical and practical issues associated with the design of transmit (source) and receive (destination) processing matrices under different operating conditions. This activity was primarily focused on point-to-point (single-hop) communications but more recently there has been an extensive work on two-hop or multi-hop settings in which single or multiple relays are used to deliver the information from the source to the destination. The aim of this t…
A reconfigurable intelligent surface (RIS) is a planar structure that is engineered to dynamically control the electromagnetic waves. In wireless communications, RISs have recently emerged as a promising technology for realizing programmable and reconfigurable wireless propagation environments through nearly passive signal transformations. With the aid of RISs, a wireless environment becomes part of the network design parameters that are subject to optimization. In this tutorial paper, we focus our attention on communication models for RISs. First, we review the communication models that are m…
Rotatable Antenna-Empowered Wireless Networks: A Tutorial
School of Microelectronics, South China University of Technology（华南理工大学微电子学院）；Department of Electronic and Electrical Engineering, Southern University of Science and Technology (SUSTech)（南方科技大学电子与电气工程系）；Department of Electrical and Computer Engineering, University of Waterloo（滑铁卢大学电气与计算机工程系）；State Key Laboratory of CNS/ATM and the School of Interdisciplinary Science, Beijing Institute of Technology（北京理工大学神经系统/原子交通控制国家重点实验室及交叉科学研究院）；National Key Laboratory of Wireless Communications, University of Electronic Science and Technology of China（电子科技大学无线通信国家重点实验室）；Department of Electronic Engineering, Shanghai Jiao Tong University（上海交通大学电子工程系）；School of Electronic and Information Engineering, South China University of Technology（华南理工大学电子与信息工程学院）
Unmanned aerial vehicles (UAVs) have found numerous applications and are expected to bring fertile business opportunities in the next decade. Among various enabling technologies for UAVs, wireless communication is essential and has drawn significantly growing attention in recent years. Compared to the conventional terrestrial communications, UAVs' communications face new challenges due to their high altitude above the ground and great flexibility of movement in the three-dimensional (3D) space. Several critical issues arise, including the line-of-sight (LoS) dominant UAV-ground channels and re…
This paper, mostly tutorial in nature, deals with the problem of characterizing the capacity of fading channels in the high signal-to-noise ratio (SNR) regime. We focus on the practically relevant noncoherent setting, where neither transmitter nor receiver know the channel realizations, but both are aware of the channel law. We present, in an intuitive and accessible form, two tools, first proposed by Lapidoth & Moser (2003), of fundamental importance to high-SNR capacity analysis: the duality approach and the escape-to-infinity property of capacity-achieving distributions. Furthermore, we app…
Game theoretical techniques have recently become prevalent in many engineering applications, notably in communications. With the emergence of cooperation as a new communication paradigm, and the need for self-organizing, decentralized, and autonomic networks, it has become imperative to seek suitable game theoretical tools that allow to analyze and study the behavior and interactions of the nodes in future communication networks. In this context, this tutorial introduces the concepts of cooperative game theory, namely coalitional games, and their potential applications in communication and wir…
This paper presents the first comprehensive tutorial on a promising research field located at the frontier of two well-established domains: Neurosciences and wireless communications, motivated by the ongoing efforts to define how the sixth generation of mobile networks (6G) will be. In particular, this tutorial first provides a novel integrative approach that bridges the gap between these two, seemingly disparate fields. Then, we present the state-of-the-art and key challenges of these two topics. In particular, we propose a novel systematization that divides the contributions into two groups,…
The extremely low efficiency is regarded as the bottleneck of Wireless Power Transfer (WPT) technology. To tackle this problem, either enlarging the transfer power or changing the infrastructure of WPT system could be an intuitively proposed way. However, the drastically important issue on the user exposure of electromagnetic radiation is rarely considered while we try to improve the efficiency of WPT. In this paper, a Distributed Antenna Power Beacon (DA-PB) based WPT system where these antennas are uniformly distributed on a circle is analyzed and optimized with the safety electromagnetic ra…
This work takes a critical look at the application of conventional machine learning methods to wireless communication problems through the lens of reliability and robustness. Deep learning techniques adopt a frequentist framework, and are known to provide poorly calibrated decisions that do not reproduce the true uncertainty caused by limitations in the size of the training data. Bayesian learning, while in principle capable of addressing this shortcoming, is in practice impaired by model misspecification and by the presence of outliers. Both problems are pervasive in wireless communication se…
Intelligent reflecting surface (IRS) is a promising technology for achieving spectrum and energy efficient wireless networks cost-effectively. Most existing works on IRS have focused on exploiting IRS to enhance the performance of wireless communication or wireless information transmission (WIT), while its potential for boosting the efficiency of radio-frequency (RF) wireless energy transmission (WET) still remains largely open. Although IRS-aided WET shares similar characteristics with IRS-aided WIT, they differ fundamentally in terms of design objective, receiver architecture, and practical …
Radiative wireless power transfer (WPT) is a promising technology to provide cost-effective and real-time power supplies to wireless devices. Although radiative WPT shares many similar characteristics with the extensively studied wireless information transfer or communication, they also differ significantly in terms of design objectives, transmitter/receiver architectures and hardware constraints, etc. In this article, we first give an overview on the various WPT technologies, the historical development of the radiative WPT technology and the main challenges in designing contemporary radiative…
Reconfigurable intelligent surfaces (RISs), with the potential to realize a smart radio environment, have emerged as an energy-efficient and a cost-effective technology to support the services and demands foreseen for coming decades. By leveraging a large number of low-cost passive reflecting elements, RISs introduce a phase-shift in the impinging signal to create a favorable propagation channel between the transmitter and the receiver.~\textcolor{black}{In this article, we provide a tutorial overview of RISs for sixth-generation (6G) wireless networks. Specifically, we present a comprehensive…
Antenna array technology enables directional transmission and reception of wireless signals, for communications, localization, and sensing purposes. The signal processing algorithms that underpin this technology began to be developed several decades ago [1], but it is first with the ongoing deployment of the fifth-generation (5G) wireless mobile networks that it becomes a mainstream technology [2]. The number of antenna elements in the arrays of the 5G base stations and user devices can be measured at the order of 100 and 10, respectively. As the networks shift towards using higher frequency b…
Internet-of-Everything (IoE) has gradually been recognized as an integral part of future wireless networks. In IoE, there can be an ultra-massive number of smart devices of various types to be served, imposing multi-dimensional requirements on wireless communication, sensing, and security. In this article, we provide a tutorial overview of the promising intelligent reflection communication (IRC) technologies, including reconfigurable intelligent surface (RIS) and ambient backscatter communication (AmBC), to support the requirements of IoE applications beyond the fifth-generation (5G) wireless …
Next-generation wireless networks must enable emerging technologies such as augmented reality and connected autonomous vehicles via wide range of wireless services that span enhanced mobile broadband (eMBB), as well as ultra-reliable low-latency communication (URLLC). Existing wireless systems that solely rely on the scarce sub-6 GHz, microwave ($μ$W) frequency bands will be unable to meet such stringent and mixed service requirements for future wireless services due to spectrum scarcity. Meanwhile, operating at high-frequency millimeter wave (mmWave) bands is seen as an attractive solution, p…
The first two parts of this tutorial on orthogonal time frequency space (OTFS) modulation have discussed the fundamentals of delay-Doppler (DD) domain communications as well as some advanced technologies for transceiver design. In this letter, we will present an OTFS-based integrated sensing and communications (ISAC) system, which is regarded as an enabling technology in next generation wireless communications. In particular, we illustrate the sensing as well as the communication models for OTFS-ISAC systems. Next, we show that benefiting from time-invariant DD channels, the sensing parameters…
Interference is traditionally viewed as a performance limiting factor in wireless communication systems, which is to be minimized or mitigated. Nevertheless, a recent line of work has shown that by manipulating the interfering signals such that they add up constructively at the receiver side, known interference can be made beneficial and further improve the system performance in a variety of wireless scenarios, achieved by symbol-level precoding (SLP). This paper aims to provide a tutorial on interference exploitation techniques from the perspective of precoding design in a multi-antenna wirel…
