Recent advances in quantum computers and simulators are steadily leading us towards full-scale quantum computing devices. Due to the fact that debugging is necessary to create any computing device, quantum tomography (QT) is a critical milestone on this path. In practice, the choice between different QT methods faces the lack of comparison methodology. Modern research provides a wide range of QT methods, which differ in their application areas, as well as experimental and computational complexity. Testing such methods is also being made under different conditions, and various efficiency measures are being applied. Moreover, many methods have complex programming implementations; thus, comparison becomes extremely difficult. In this study, we have developed a general methodology for comparing quantum state tomography methods. The methodology is based on an estimate of the resources needed to achieve the required accuracy. We have developed a software library (in MATLAB and Python) that makes it easy to analyze any QT method implementation through a series of numerical experiments. The conditions for such a simulation are set by the number of tests corresponding to real physical experiments. As a validation of the proposed methodology and software, we analyzed and compared a set of QT methods. The analysis revealed some method-specific features and provided estimates of the relative efficiency of the methods.
Typical quantum gate tomography protocols struggle with a self-consistency problem: the gate operation cannot be reconstructed without knowledge of the initial state and final measurement, but such knowledge cannot be obtained without well-characterized gates. A recently proposed technique, known as randomized benchmarking tomography (RBT), sidesteps this self-consistency problem by designing experiments to be insensitive to preparation and measurement imperfections. We implement this proposal in a superconducting qubit system, using a number of experimental improvements including implementing…
We present measurements of single-qubit gate errors for a superconducting qubit. Results from quantum process tomography and randomized benchmarking are compared with gate errors obtained from a double pi pulse experiment. Randomized benchmarking reveals a minimum average gate error of 1.1+/-0.3% and a simple exponential dependence of fidelity on the number of gates. It shows that the limits on gate fidelity are primarily imposed by qubit decoherence, in agreement with theory.
We train convolutional neural networks to predict whether or not a set of measurements is informationally complete to uniquely reconstruct any given quantum state with no prior information. In addition, we perform fidelity benchmarking based on this measurement set without explicitly carrying out state tomography. The networks are trained to recognize the fidelity and a reliable measure for informational completeness. By gradually accumulating measurements and data, these trained convolutional networks can efficiently establish a compressive quantum-state characterization scheme by acceleratin…
Benchmarking and characterising quantum states and logic gates is essential in the development of devices for quantum computing. We introduce a Bayesian approach to self-consistent process tomography, called fast Bayesian tomography (FBT), and experimentally demonstrate its performance in characterising a two-qubit gate set on a silicon-based spin qubit device. FBT is built on an adaptive self-consistent linearisation that is robust to model approximation errors. Our method offers several advantages over other self-consistent tomographic methods. Most notably, FBT can leverage prior informatio…
The deployment of intermediate- and large-scale quantum devices necessitates the development of efficient full state tomographical techniques for quantum benchmarks. Here, we introduce a matrix filling-based method for tomography of pure quantum states, called the matrix-completion quantum state tomography. This method requires only 2n + 1 local Pauli operators and minimal post-processing for n-qubit states. Numerical results show that our method is highly efficient on superconducting real quantum devices and achieves better fidelity estimates of multiqubit quantum states as compared to contem…
A key requirement for scalable quantum computing is that elementary quantum gates can be implemented with sufficiently low error. One method for determining the error behavior of a gate implementation is to perform process tomography. However, standard process tomography is limited by errors in state preparation, measurement and one-qubit gates. It suffers from inefficient scaling with number of qubits and does not detect adverse error-compounding when gates are composed in long sequences. An additional problem is due to the fact that desirable error probabilities for scalable quantum computin…
As increasingly impressive quantum information processors are realized in laboratories around the world, robust and reliable characterization of these devices is now more urgent than ever. These diagnostics can take many forms, but one of the most popular categories is tomography, where an underlying parameterized model is proposed for a device and inferred by experiments. Here, we introduce and implement efficient operational tomography, which uses experimental observables as these model parameters. This addresses a problem of ambiguity in representation that arises in current tomographic app…
We propose an efficient protocol to fully reconstruct a set of high-fidelity quantum gates. Usually, the efficiency of reconstructing high-fidelity quantum gates is limited by the sampling noise. Our protocol is based on a perturbative approach and has two stages. In the first stage, the initial part of noisy quantum gates is reconstructed by measuring traces of maps, and the trace can be measured by amplifying the noise in a way similar to randomised benchmarking and quantum spectral tomography. In the second stage, by amplifying the non-unital part using the unital part, we can efficiently r…
State of the art qubit systems are reaching the gate fidelities required for scalable quantum computation architectures. Further improvements in the fidelity of quantum gates demands characterization and benchmarking protocols that are efficient, reliable and extremely accurate. Ideally, a benchmarking protocol should also provide information on how to rectify residual errors. Gate Set Tomography (GST) is one such protocol designed to give detailed characterization of as-built qubits. We implemented GST on a high-fidelity electron-spin qubit confined by a single $^{31}$P atom in $^{28}$Si. The…
Quantum process tomography is a necessary tool for verifying quantum gates and diagnosing faults in architectures and gate design. We show that the standard approach of process tomography is grossly inaccurate in the case where the states and measurement operators used to interrogate the system are generated by gates that have some systematic error, a situation all but unavoidable in any practical setting. These errors in tomography can not be fully corrected through oversampling or by performing a larger set of experiments. We present an alternative method for tomography to reconstruct an ent…
We present a method for quantum state tomography that enables the efficient estimation, with fixed precision, of any of the matrix elements of the density matrix of a state, provided that the states from the basis in which the matrix is written can be efficiently prepared in a controlled manner. Furthermore, we show how this algorithm is well suited for quantum process tomography, enabling to perform selective and efficient quantum process tomography.
Using the the convex semidefinite programming method and superoperator formalism we obtain the finite quantum tomography of some mixed quantum states such as: qudit tomography, N-qubit tomography, phase tomography and coherent spin state tomography, where that obtained results are in agreement with those of References \cite{schack,Pegg,Barnett,Buzek,Weigert}.
Quantum state tomography--the practice of estimating a quantum state by performing measurements on it--is useful in a variety of contexts. We introduce "gentle tomography" as a version of tomography that preserves the measured quantum data. As an application of gentle tomography, we describe a simple polynomial-time method for universal source coding.
Amongst the multitude of state reconstruction techniques, the so-called "quantum tomography" seems to be the most fruitful. In this letter, I will start by developing the mathematical apparatus of quantum tomography and, later, I will explain how it can be applied to various quantum systems.
Quantum chemistry provides key applications for near-term quantum computing, but these are greatly complicated by the presence of noise. In this work we present an efficient ansatz for the computation of two-electron atoms and molecules within a hybrid quantum-classical algorithm. The ansatz exploits the fundamental structure of the two-electron system, and treating the nonlocal and local degrees of freedom on the quantum and classical computers, respectively. Here the nonlocal degrees of freedom scale linearly with respect to basis-set size, giving a linear ansatz with only $\mathcal{O}(1)$ c…
Quantum computers have the potential to outperform classical computers in a range of computational tasks, such as prime factorisation and unstructured searching. However, real-world quantum computers are subject to noise. Quantifying noise is of vital importance, since it is often the dominant factor preventing the successful realisation of advanced quantum computations. Here we propose and demonstrate an interleaved randomised benchmarking protocol for measurement-based quantum computers that can be used to estimate the fidelity of any single-qubit measurement-based gate. We tested the protoc…
The efficiency of quantum state tomography is discussed from the point of view of quantum parameter estimation theory, in which the trace of the weighted covariance is to be minimized. It is shown that tomography is optimal only when a special weight is adopted.
We develop a quantum process tomography method, which variationally reconstruct the map of a process, using noisy and incomplete information about the dynamics. The new method encompasses the most common quantum process tomography schemes. It is based on the variational quantum tomography method (VQT) proposed by Maciel et al. in arXiv:1001.1793[quant-ph].
The impressive pace of advance of quantum technology calls for robust and scalable techniques for the characterization and validation of quantum hardware. Quantum process tomography, the reconstruction of an unknown quantum channel from measurement data, remains the quintessential primitive to completely characterize quantum devices. However, due to the exponential scaling of the required data and classical post-processing, its range of applicability is typically restricted to one- and two-qubit gates. Here, we present a new technique for performing quantum process tomography that addresses th…
Accurate methods of assessing the performance of quantum gates are extremely important. Quantum process tomography and randomized benchmarking are the current favored methods. Quantum process tomography gives detailed information, but significant approximations must be made to reduce this information to a form quantum error correction simulations can use. Randomized benchmarking typically outputs just a single number, the fidelity, giving no information on the structure of errors during the gate. Neither method is optimized to assess gate performance within an error detection circuit, where ga…
We describe a scalable experimental protocol for obtaining estimates of the error rate of individual quantum computational gates. This protocol, in which random Clifford gates are interleaved between a gate of interest, provides a bounded estimate of the average error of the gate under test so long as the average variation of the noise affecting the full set of Clifford gates is small. This technique takes into account both state preparation and measurement errors and is scalable in the number of qubits. We apply this protocol to a superconducting qubit system and find gate errors that compare…
The intimate connection between the Banach space wavelet reconstruction method on homogeneous spaces with both singular and nonsingular vacuum vectors, and some of well known quantum tomographies, such as: Moyal-representation for a spin, discrete phase space tomography, tomography of a free particle, Homodyne tomography, phase space tomography and SU(1,1) tomography is explained. Also both the atomic decomposition and banach frame nature of these quantum tomographic examples is explained in details. Finally the connection between the wavelet formalism on Banach space and Q-function is discuss…
Whenever we do not have an informationally complete set of measurements, the estimate of a quantum state can not be uniquely determined. In this case, among the density matrices compatible with the available data, it is commonly preferred that one which is the most uncommitted with the missing information. This is the purpose of the Maximum Entropy estimation (MaxEnt) and the Variational Quantum Tomography (VQT). Here, we propose a variant of Variational Quantum Tomography and show its relationship with Maximum Entropy methods in quantum tomographies with incomplete set of measurements. We pro…
The paper is devoted to the mathematical foundation of the quantum tomography using the theory of square-integrable representations of unimodular Lie groups.
In quantum-state tomography on sources with quantum degrees of freedom of large Hilbert spaces, inference of quantum states of light for instance, a complete characterization of the quantum states for these sources is often not feasible owing to limited resources. As such, the concepts of informationally incomplete state estimation becomes important. These concepts are ideal for applications to quantum channel/process tomography, which typically requires a much larger number of measurement settings for a full characterization of a quantum channel. Some key aspects of both quantum-state and qua…
Quantum process tomography is an experimental technique to fully characterize an unknown quantum process. Standard quantum process tomography suffers from exponentially scaling of the number of measurements with the increasing system size. In this work, we put forward a quantum machine learning algorithm which approximately encodes the unknown unitary quantum process into a relatively shallow depth parametric quantum circuit. We demonstrate our method by reconstructing the unitary quantum processes resulting from the quantum Hamiltonian evolution and random quantum circuits up to $8$ qubits. R…
We present the first complete optimization of quantum tomography, for states, POVMs, and various classes of transformations, for arbitrary prior ensemble and arbitrary representation, giving corresponding feasible experimental schemes.
Quantum process tomography is a procedure by which an unknown quantum operation can be fully experimentally characterized. We reinterpret Choi's proof of the fact that any completely positive linear map has a Kraus representation [Lin. Alg. and App., 10, 1975] as a method for quantum process tomography. Furthermore, the analysis for obtaining the Kraus operators are particularly simple in this method.
The performance of a quantum teleportation algorithm implemented on an ion trap quantum computer is investigated. First the algorithm is analyzed in terms of the teleportation fidelity of six input states evenly distributed over the Bloch sphere. Furthermore, a quantum process tomography of the teleportation algorithm is carried out which provides almost complete knowledge about the algorithm.
Quantum tomography is a process of quantum state reconstruction using data from multiple measurements. An essential goal for a quantum tomography algorithm is to find measurements that will maximize the useful information about an unknown quantum state obtained through measurements. One of the recently proposed methods of quantum tomography is the algorithm based on rank-preserving transformations. The main idea is to transform a basic measurement set in a way to provide a situation that is equivalent to measuring the maximally mixed state. As long as tomography of a fully mixed state has the …
We propose network benchmarking: a procedure to efficiently benchmark the quality of a quantum network link connecting quantum processors in a quantum network. This procedure is based on the standard randomized benchmarking protocol and provides an estimate for the fidelity of a quantum network link. We provide statistical analysis of the protocol as well as a simulated implementation inspired by NV-center systems using Netsquid, a special purpose simulator for noisy quantum networks.
Quantum state tomography, the ability to deduce the state of a quantum system from measured data, is the gold standard for verification and benchmarking of quantum devices. It has been realized in systems with few components, but for larger systems it becomes infeasible because the number of quantum measurements and the amount of computation required to process them grows exponentially in the system size. Here we show that we can do exponentially better than direct state tomography for a wide range of quantum states, in particular those that are well approximated by a matrix product state ansa…
As progress is made towards the first generation of error-corrected quantum computers, robust characterization and validation protocols are required to assess the noise environments of physical quantum processors. While standard coherence metrics and characterization protocols such as T1 and T2, process tomography, and randomized benchmarking are now ubiquitous, these techniques provide only partial information about the dynamic multi-qubit loss channels responsible for processor errors, which can be described more fully by a Lindblad operator in the master equation formalism. Here, we introdu…
Quantum detector tomography is a fundamental technique for calibrating quantum devices and performing quantum engineering tasks. In this paper, we design optimal probe states for detector estimation based on the minimum upper bound of the mean squared error (UMSE) and the maximum robustness. We establish the minimum UMSE and the minimum condition number for quantum detectors and provide concrete examples that can achieve optimal detector tomography. In order to enhance the estimation precision, we also propose a two-step adaptive detector tomography algorithm to optimize the probe states adapt…
We study the possibility of performing quantum state tomography via equidistant states. This class of states allows us to propose a non-symmetric informationally complete POVM based tomographic scheme. The scheme is defined for odd dimensions and involves an inversion which can be analytically carried out by Fourier transform.
We show that weighted unitary 2-designs define optimal measurements on the system-ancilla output state for ancilla-assisted process tomography of unital quantum channels. Examples include complete sets of mutually unbiased unitary-operator bases. Each of these specifies a minimal series of optimal orthogonal measurements. General quantum channels are also considered.
Quantum tomography is a widely applicable tool for complete characterization of quantum states and processes. In the present work, we develop a method for precision-guaranteed quantum process tomography. With the use of the Choi-Jamiolkowski isomorphism, we generalize the recently suggested extended norm minimization estimator for the case of quantum processes. Our estimator is based on the Hilbert-Schmidt distance for quantum processes. Specifically, we discuss the application of our method for characterizing quantum gates of a superconducting quantum processor in the framework of the IBM Q E…
Robust, accurate and efficient quantum tomography is key for future quantum technologies. Traditional methods are impractical for even medium sized systems and are not robust against noise and errors. Here we report on an experimental demonstration of self-guided quantum tomography; an autonomous, fast, robust and precise technique for measuring quantum states with significantly less computational resources than standard techniques. The quantum state is iteratively learned by treating tomography as a projection measurement optimization problem. We experimentally demonstrate robustness against …
We present an experimental demonstration of quantum optical coherence tomography (QOCT). The technique makes use of an entangled twin-photon light source to carry out axial optical sectioning. QOCT is compared to conventional optical co1herence tomography (OCT). The immunity of QOCT to dispersion, as well as a factor of two enhancement in resolution, are experimentally demonstrated.
Using a Hong-Ou-Mandel interferometer, we apply the techniques of quantum process tomography to characterize errors and decoherence in a prototypical two-photon operation, a singlet-state filter. The quantum process tomography results indicate a large asymmetry in the process and also the required operation to correct for this asymmetry. Finally, we quantify errors and decoherence of the filtering operation after this modification.
