Studying the interplay between multiple coupled mechanical resonators is a promising new direction in the field of optomechanics. Understanding the dynamics of the interaction can lead to rich new effects, such as enhanced coupling and multi-body physics. In particular, multi-resonator optomechanical systems allow for distinct dynamical effects due to the optical cavity coherently coupling mechanical resonators. Here, we study the mechanical response of two SiN membranes and a single optical mode, and find that the cavity induces a time delay between the local and cavity-transduced thermal noises experienced by the resonators. This results in an optomechanical phase lag that causes destructive interference, cancelling the mechanical thermal noise by up to 20 dB in a controllable fashion, matching our theoretical expectation. Based on the effective coupling between membranes, we further propose, derive and measure a collective effect, cooperativity competition on mechanical dissipation, whereby the linewidth of one resonator depends on the coupling efficiency (cooperativity) of the other resonator.
Optomechanical systems offer new opportunities in quantum information processing and quantum sensing. Many solid-state quantum devices operate at millikelvin temperatures -- however, it has proven challenging to operate nanoscale optomechanical devices at these ultralow temperatures due to their limited thermal conductance and parasitic optical absorption. Here, we demonstrate a two-dimensional optomechanical crystal resonator capable of achieving large cooperativity $C$ and small effective bath occupancy $n_b$, resulting in a quantum cooperativity $C_{\text{eff}}\equiv C/n_b \approx 1.3 > 1$ …
We theoretically analyze antibunching of the phonon field in an optomechanical oscillator employ- ing the membrane-in-the-middle geometry. More specifically, a single-mode mechanical oscillator is quadratically coupled to a single-mode cavity field in the regime in which the cavity dissipation is a dominant source of damping, and adiabatic elimination of the cavity field leads to an effective cubic nonlinearity for the mechanics. We show analytically in the weak coupling regime that the mechan- ics displays a chaotic phonon field for small optomechanical cooperativity, whereas an antibunched s…
We propose a realistic system with separated optical and mechanical degrees of freedom, in which a high-mechanical-quality silicon nitride membrane is placed upon a high-optical-quality whispering gallery microcavity. The strongly enhanced linear optomechanical coupling, together with simultaneously low optical and mechanical losses in the present system, results in a remarkable single-photon cooperativity exceeding 300. This unprecedented cooperativity in the optomechanical system enables optical nonlinearity at low light intensities and holds great potential in generating, storing, and imple…
Ponderomotive squeezing of the output light of an optical cavity has been recently observed in the MHz range in two different cavity optomechanical devices. Quadrature squeezing becomes particularly useful at lower spectral frequencies, for example in gravitational wave interferometers, despite being more sensitive to excess phase and frequency noise. Here we show a phase/frequency noise cancellation mechanism due to destructive interference which can facilitate the production of ponderomotive squeezing in the kHz range and we demonstrate it experimentally in an optomechanical system formed by…
Exploring the fundamental quantum behaviour of optomechanical resonators is of great interest recently but requires the realization of the strong coupling regime. We study the optical photon-phonon coupling of the so-called membrane in the middle (MITM) optomechanical system. Using coupled-mode theory we find that the optomechanical coupling is proportional to the electric susceptibility of the membrane. By considering the doping atoms or spins into the membrane and driving these appropriately we induce a tunable ultra-large refractive index without absorption which enhances the optomechanical…
Diamond cavity optomechanical devices hold great promise for quantum technology based on coherent coupling between photons, phonons and spins. These devices benefit from the exceptional physical properties of diamond, including its low mechanical dissipation and optical absorption. However the nanoscale dimensions and mechanical isolation of these devices can make them susceptible to thermo-optic instability when operating at the high intracavity field strengths needed to realize coherent photon--phonon coupling. In this work, we overcome these effects through engineering of the device geometr…
Cavity-optomechanical systems realized in single-crystal diamond are poised to benefit from its extraordinary material properties, including low mechanical dissipation and a wide optical transparency window. Diamond is also rich in optically active defects, such as the nitrogen-vacancy (NV) and silicon-vacancy (SiV) centers, which behave as atom-like systems in the solid state. Predictions and observations of coherent coupling of the NV electronic spin to phonons via lattice strain has motivated the development of diamond nanomechanical devices aimed at realization of hybrid quantum systems, i…
We report dispersive coupling of an optically trapped silica nanoparticle ($143~$nm diameter) to the field of a driven Fabry-Perot cavity in high vacuum ($4.3\times 10^{-6}~$mbar). We demonstrate nanometer-level control in positioning the particle with respect to the intensity distribution of the cavity field, which allows access to linear, quadratic and tertiary optomechanical interactions in the resolved sideband regime. We determine all relevant coupling rates of the system, i.e. mechanical and optical losses as well as optomechanical interaction, and obtain a quantum cooperativity of $C_Q …
Optomechanical systems based on nanophotonics are advancing the field of precision motion measurement, quantum control and nanomechanical sensing. In this context III-V semiconductors offer original assets like the heteroepitaxial growth of optimized metamaterials for photon/phonon interactions. GaAs has already demonstrated high performances in optomechanics but suffers from two photon absorption (TPA) at the telecom wavelength, which can limit the cooperativity. Here, we investigate TPA-free III-V semiconductor materials for optomechanics applications: GaAs lattice-matched In0:5Ga0:5P and Al…
Elastic dissipation through radiation towards the substrate is a major loss channel in micro- and nanomechanical resonators. Engineering the coupling of these resonators with optical cavities further complicates and constrains the design of low-loss optomechanical devices. In this work we rely on the coherent cancellation of mechanical radiation to demonstrate material and surface absorption limited silicon near-field optomechanical resonators oscillating at tens of MHz. The effectiveness of our dissipation suppression scheme is investigated at room and cryogenic temperatures. While at room te…
We propose a versatile, free-space cavity optomechanics platform built from two photonic crystal membranes, one of which is freely suspended, and designed to form a microcavity less than one wavelength long. This cavity features a series of photonic bound states in the continuum that, in principle, trap light forever and can be favorably used together with evanescent coupling for realizing various types of optomechanical couplings, such as linear or quadratic coupling of either dispersive or dissipative type, by tuning the photonic crystal patterning and cavity length. Crucially, this platform…
Optical measurement of the motion of a 940 kHz mechanical resonance of a silicon nitride nanostring resonator is demonstrated with a read out noise imprecision reaching 37 dB below that of the resonator's zero-point fluctuations. Via intensity modulation of the optical probe laser, radiation pressure feedback is used to cool and damp the mechanical mode from an initial room temperature occupancy of $\bar{n}_{b} = 6.5 \times 10^6$ ($T_{b}=295$K) down to a phonon occupation of $\langle n \rangle = 66 \pm 10$, representing a mode temperature of $T_{m} \approx 3$mK. The five decades of cooling is …
Single-crystal diamond cavity optomechanical devices are a promising example of a hybrid quantum system: by coupling mechanical resonances to both light and electron spins, they can enable new ways for photons to control solid state qubits. However, realizing cavity optomechanical devices from high quality diamond chips has been an outstanding challenge. Here we demonstrate single-crystal diamond cavity optomechanical devices that can enable photon-phonon-spin coupling. Cavity optomechanical coupling to $2\,\text{GHz}$ frequency ($f_\text{m}$) mechanical resonances is observed. In room tempera…
Photonic crystal (PhC) membranes patterned with sub-wavelength periods offer a unique combination of high reflectivity, low mass, and high mechanical quality factor. We demonstrate a PhC membrane that we use as one mirror of a Fabry-Perot cavity with finesse as high as $F=35,000(500)$, corresponding to a record high PhC reflectivity of $R=0.999835(6)$. The fundamental mechanical frequency is 426 kHz, more than twice the optical linewidth, placing it firmly in the resolved-sideband regime. The mechanical quality factor in vacuum is $Q=1.1(1)\times 10^6$, allowing us to achieve values of the sin…
Demonstrating a device that efficiently connects light, motion, and microwaves is an outstanding challenge in classical and quantum photonics. We make significant progress in this direction by demonstrating a photonic crystal resonator on thin-film lithium niobate (LN) that simultaneously supports high-$Q$ optical and mechanical modes, and where the mechanical modes are coupled piezoelectrically to microwaves. For optomechanical coupling, we leverage the photoelastic effect in LN by optimizing the device parameters to realize coupling rates $g_0/2π\approx 120~\textrm{kHz}$. An optomechanical c…
Optical systems are often subject to parametric instability caused by the delayed response of the optical field to the system dynamics. In some cases, parasitic photothermal effects aggravate the instability by adding new interaction dynamics. This may lead to the possible insurgence or amplification of parametric gain that can further destabilize the system. In this paper, we show that the photothermal properties of an optomechanical cavity can be modified to mitigate or even completely cancel optomechanical instability. By inverting the sign of the photothermal interaction to let it cooperat…
Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10-GHz phonons are res…
The inherently nonlinear interaction between light and motion in cavity optomechanical systems has experimentally been studied in a linearized description in all except highly driven cases. Here we demonstrate a nanoscale optomechanical system, in which the interaction between light and motion is so large (single-photon cooperativity $C_0 \approx 10^3$) that thermal motion induces optical frequency fluctuations larger than the intrinsic optical linewidth. The system thereby operates in a fully nonlinear regime, which pronouncedly impacts the optical response, displacement measurement, and radi…
Laser engineered exciton-polariton networks could lead to dynamically configurable integrated optical circuitry and quantum devices. Combining cavity optomechanics with electrodynamics in laser configurable hybrid designs constitutes a platform for the vibrational control, conversion, and transport of signals. With this aim we investigate 3D optical traps laser-induced in quantum-well embedded semiconductor planar microcavities. We show that the laser generated and controlled discrete states of the traps dramatically modify the interaction between photons and phonons confined in the resonators…
We investigate a theoretical demonstration of perfect frequency conversion in an optomechanical system in the weak coupling regime without a Stokes side-band. An optomechanical cavity illuminated by a weak probe field generates two side-modes, differentiating from the original signal by a phonon frequency. We report the presence of a special combination of parameters in the weak-coupling regime, where Stokes side-mode vanishes exactly. Only the anti-Stokes mode is observed with a few hundreds Hz spectral bandwidth of the probe field. Emergence of this special point is totally unrelated with th…
Conversion between signals in the microwave and optical domains is of great interest both for classical telecommunication, as well as for connecting future superconducting quantum computers into a global quantum network. For quantum applications, the conversion has to be both efficient, as well as operate in a regime of minimal added classical noise. While efficient conversion has been demonstrated using mechanical transducers, they have so far all operated with a substantial thermal noise background. Here, we overcome this limitation and demonstrate coherent conversion between GHz microwave s…
We report quantum ground state cooling of a levitated nanoparticle in a room temperature environment. Using coherent scattering into an optical cavity we cool the center of mass motion of a $143$ nm diameter silica particle by more than $7$ orders of magnitude to $n_x=0.43\pm0.03$ phonons along the cavity axis, corresponding to a temperature of $12~μ$K. We infer a heating rate of $Γ_x/2π= 21\pm 3$ kHz, which results in a coherence time of $7.6~μ$s -- or $15$ coherent oscillations -- while the particle is optically trapped at a pressure of $10^{-6}$ mbar. The inferred optomechanical coupling ra…
Observation of quantum phenomena in cryogenic, optically cooled mechanical resonators has been recently achieved by a few experiments based on cavity optomechanics. A well-established experimental platform is based on a thin film stoichiometric ($ Si_3 N_4 $) nanomembrane embedded in a Fabry-Perot cavity, where the coupling with the light field is provided by the radiation pressure of the light impinging on the membrane surface. Two crucial parameters have to be optimized to ensure that these systems work at the quantum level: the cooperativity $ C$ describing the optomechanical coupling and t…
Bulk acoustic resonators support robust, long-lived mechanical modes, capable of coupling to various quantum systems. In separate works, such devices have achieved strong coupling to both superconducting qubits, via piezoelectricity, and optical cavities, via Brillouin interactions. In this work, we present a novel hybrid microwave/optical platform capable of coupling to bulk acoustic waves through cavity-enhanced piezoelectric and photoelastic interactions. The modular, tunable system achieves fully resonant and well-mode-matched interactions between a 3D microwave cavity, a high-frequency bu…
Thermal noise generally greatly exceeds quantum noise in optomechanical devices unless the mechanical frequency is very high or the thermodynamic temperature is very low. This paper addresses the design concept for a novel optomechanical device capable of ultrahigh quality factors in the audio frequency band with negligible thermal noise. The proposed system consists of a minimally supported millimeter scale pendulum mounted in a Double End-Mirror Sloshing (DEMS) cavity that is topologically equivalent to a Membrane-in-the-Middle (MIM) cavity. The radiation pressure inside the high-finesse cav…
Many protocols in quantum science and technology require initializing a system in a pure quantum state. In the context of the motional state of massive resonators, this enables studying fundamental physics at the elusive quantum-classical transition, and measuring force and acceleration with enhanced sensitivity. Laser cooling has been a method of choice to prepare mechanical resonators in the quantum ground state, one of the simplest pure states. However, in order to overcome the heating and decoherence by the thermal bath, this usually has to be combined with cryogenic cooling. Here, we lase…
