The inherently nonlinear interaction between light and motion in cavity optomechanical systems has experimentally been studied in a linearized description in all except highly driven cases. Here we demonstrate a nanoscale optomechanical system, in which the interaction between light and motion is so large (single-photon cooperativity $C_0 \approx 10^3$) that thermal motion induces optical frequency fluctuations larger than the intrinsic optical linewidth. The system thereby operates in a fully nonlinear regime, which pronouncedly impacts the optical response, displacement measurement, and radiation pressure backaction. Experiments show that the apparent optical linewidth is dominated by thermomechanically-induced frequency fluctuations over a wide temperature range. The nonlinearity induces breakdown of the traditional cavity optomechanical descriptions of thermal displacement measurements. Moreover, we explore how radiation pressure backaction in this regime affects the mechanical fluctuation spectra. The strong nonlinearity could serve as a resource to control the motional state of the resonator. We demonstrate the use of highly nonlinear transduction to perform a quadratic measurement of position while suppressing linear transduction.
We propose and analyze a nanomechanical architecture where light is used to perform linear quantum operations on a set of many vibrational modes. Suitable amplitude modulation of a single laser beam is shown to generate squeezing, entanglement, and state-transfer between modes that are selected according to their mechanical oscillation frequency. Current optomechanical devices based on photonic crystals may provide a platform for realizing this scheme.
In a hybrid atom-optomechanical system, the optical coupling of a mechanical mode of a nanomembrane in an optical cavity with a distant interacting atom gas permits highly non-classical quantum many-body states. We show that the mechanical mode can be squeezed by the back-action of internal excitations of the atoms in the gas. A Bogoliubov approach reveals that these internal excitations form a fluctuating environment of quasi-particle excitations for the mechanical mode with a gaped spectral density. Nanomechanical squeezing arises due to quasi-particle excitations in the interacting atom gas…
Cavity-enhanced radiation pressure coupling between optical and mechanical degrees of freedom allows quantum-limited position measurements and gives rise to dynamical backaction enabling amplification and cooling of mechanical motion. Here we demonstrate purely dispersive coupling of high Q nanomechanical oscillators to an ultra-high finesse optical microresonator via its evanescent field, extending cavity optomechanics to nanomechanical oscillators. Dynamical backaction mediated by the optical dipole force is observed, leading to laser-like coherent nanomechanical oscillations solely due to r…
We propose and experimentally demonstrate a technique for coupling phonons out of an optomechanical crystal cavity. By designing a perturbation that breaks a symmetry in the elastic structure, we selectively induce phonon leakage without affecting the optical properties. It is shown experimentally via cryogenic measurements that the proposed cavity perturbation causes loss of phonons into mechanical waves on the surface of silicon, while leaving photon lifetimes unaffected. This demonstrates that phonon leakage can be engineered in on-chip optomechanical systems. We experimentally observe larg…
In contrast to the optomechanically induced transparency (OMIT) defined conventionally, the inverse OMIT behaves as coherent absorption of the input lights in the optomechanical systems. We characterize a feasible inverse OMIT in a multi-channel fashion with a double-sided optomechanical cavity system coupled to a nearby charged nanomechanical resonator via Coulomb interaction, where two counter-propagating probe lights can be absorbed via one of the channels or even via three channels simultaneously with the assistance of a strong pump light. Under realistic conditions, we demonstrate the exp…
We study the role of stimulated Brillouin scattering in a fiber cavity by numerical simulations and a simple theoretical model and find good agreement between experiment, simulation and theory. We also investigate an optomechanical system based on a fiber cavity in the presence on the nonlinear Brillouin scattering. Using simulation and theory, we show that this hybrid optomechanical system increases optomechanical damping for low mechanical resonance frequencies in the unresolved sideband regime. Furthermore, optimal damping occurs for blue detuning in stark contrast to standard optomechanics…
We study a resonator coupled to a generic detector and calculate the noise spectra of the two sub-systems. We describe the coupled system by a closed, linear, set of Langevin equations and derive a general form for the finite frequency noise of both the resonator and the detector. The resonator spectrum is the well-known thermal form with an effective damping, frequency shift and diffusion term. In contrast, the detector noise shows a rather striking Fano-like resonance, i.e. there is a resonance at the renormalized frequency, and an anti-resonance at the bare resonator frequency. As examples …
We propose to thermalize a low-dimensional photon gas and obtain photon Bose-Einstein condensation by optomechanical interactions in a microscopic optical cavity, with a single longitudinal mode and many transverse modes. The geometry of the short cavity is such that it provides a low-frequency cutoff at a photon energy far above the thermal energy, so that thermal emission of photons is suppressed and the photon number is conserved. While previous experiments on photon Bose-Einstein condensation have used dye molecules for photon gas thermalization, we here investigate thermalization owing to…
Nanomechanical systems are generally embedded in a macroscopic environment where the sources of thermal noise are difficult to pinpoint. We engineer a silicon nitride membrane optomechanical resonator such that its thermal noise is acoustically driven by a spatially well-defined remote macroscopic bath. This bath acts as an acoustic blackbody emitting and absorbing acoustic radiation through the silicon substrate. Our optomechanical system acts as a sensitive detector for the blackbody temperature and for photoacoustic imaging. We demonstrate that the nanomechanical mode temperature is governe…
We propose a novel scheme for realizing single-photon blockade in a weakly driven hybrid cavity optomechanical system consisting of a nonlinear photonic crystal. Sub-Poissonian statistics is realized even when the single-photon optomechanical coupling strength is smaller than the decay rate of the optical mode. The scheme relaxes the requirement of strong coupling for photon blockade in optomechanical systems. It is shown that photon blockade could be generated at the telecommunication wavelength.
Optomechanical devices sensitively transduce and actuate motion of nanomechanical structures using light. Single--crystal diamond promises to improve the performance of optomechanical devices, while also providing opportunities to interface nanomechanics with diamond color center spins and related quantum technologies. Here we demonstrate dissipative waveguide--optomechanical coupling exceeding 35 GHz/nm to diamond nanobeams supporting both optical waveguide modes and mechanical resonances, and use this optomechanical coupling to measure nanobeam displacement with a sensitivity of $9.5$ fm/$\s…
A theoretical consideration of the so-called "membrane-in-the-middle" optomechanical cavity revealed that it undergoes a spontaneous symmetry breaking as a function of the transparency of the membrane. Such typical features of this phenomenon as a square-root development of the order parameter and divergency of the critical susceptibility were identified. In the contract to classical spontaneous-symmetry-breaking systems of ferromagnets and ferroelectrics, in the considered system, this divergency remains, due to interference effects, an "internal" property of the system, which does not reveal…
We present the design of an optomechanical crystal nanobeam cavity that combines finite-element simulation with numerical optimization, and considers the optomechanical coupling arising from both moving dielectric boundaries and the photo-elastic effect. Applying this methodology results in a nanobeam with an experimentally realized intrinsic optical Q-factor of 1.2x10^6, a mechanical frequency of 5.1GHz, a mechanical Q-factor of 6.8x10^5 (at T=10K), and a zero-point-motion optomechanical coupling rate of g=1.1MHz.
We present a novel proposal for generating quantum superpositions of macroscopically distinct states of a bulk mechanical oscillator, compatible with existing optomechanical devices operating in the readily achievable bad-cavity limit. The scheme is based on a pulsed cavity optomechanical quantum non-demolition (QND) interaction, driven by displaced non-Gaussian states, and measurement-induced feedback, avoiding the need for strong single-photon optomechanical coupling. Furthermore, we show that single-quadrature cooling of the mechanical oscillator is sufficient for efficient state preparatio…
In the field of cavity nano-optomechanics, the nanoresonator-in-the-middle approach consists in inserting a sub-wavelength sized deformable resonator, here a nanowire, in the small mode volume of a fiber microcavity. Internal resonances in the nanowire enhance the light nanowire interaction which provide giant coupling strengthes -- sufficient to enter the single photon regime of cavity optomechanics -- at the condition to precisely position the nanowire within the cavity field. Here we expose a theoretical description that combines an analytical formulation of the Mie-scattering of the intrac…
We study synchronization of a room temperature optomechanical system formed by two resonators coupled via radiation pressure to the same driven optical cavity mode. By using stochastic Langevin equations and effective slowly-varying amplitude equations, we explore the long-time dynamics of the system. We see that thermal noise can induce significant non-Gaussian dynamical properties, including the coexistence of multi-stable synchronized limit cycles and phase diffusion. Synchronization in this optomechanical system is very robust with respect to thermal noise: in fact, even though each oscill…
Cavity optomechanical systems are approaching a strong-coupling regime where the coherent dynamics of nanomechanical resonators can be manipulated and controlled by optical fields at the single photon level. Here we propose an interferometric scheme able to detect optomechanical coherent interaction at the single-photon level which is experimentally feasible with state-of-the-art devices.
Gauge fields play important roles in condensed matter, explaining for example nonreciprocal and topological transport phenomena. Establishing gauge potentials for phonon transport in nanomechanical systems would bring quantum Hall physics to a new domain, which offers broad applications in sensing and signal processing, and is naturally associated with strong nonlinearities and thermodynamics. In this work, we demonstrate a magnetic gauge field for nanomechanical vibrations in a scalable, on-chip optomechanical system. We exploit multimode optomechanical interactions, which provide a useful re…
We propose a scheme able to entangle at the steady state a nanomechanical resonator with a microwave cavity mode of a driven superconducting coplanar waveguide. The nanomechanical resonator is capacitively coupled with the central conductor of the waveguide and stationary entanglement is achievable up to temperatures of tens of milliKelvin.
A scheme is presented for entangling two separated nanomechanical oscillators by injecting broad band squeezed vacuum light and laser light into the ring cavity. We work in the resolved sideband regime. We find that in order to obtain the maximum entanglement of the two oscillators, the squeezing parameter of the input light should be about 1. We report significant entanglement over a very wide range of power levels of the pump and temperatures of the environment.
Pulsed optomechanical measurements enable squeezing, non-classical state creation and backaction-free sensing. We demonstrate pulsed measurement of a cryogenic nanomechanical resonator with record precision close to the quantum regime. We use these to prepare thermally squeezed and purified conditional mechanical states, and to perform full state tomography. These demonstrations exploit large photon-phonon coupling in a nanophotonic cavity to reach a single-pulse imprecision of 9 times the mechanical zero-point amplitude $x_\mathrm{zpf}$. We study the effect of other mechanical modes which lim…
We have designed photonic crystal suspended membranes with optimized optical and mechanical properties for cavity optomechanics. Such resonators sustain vibration modes in the megahertz range with quality factors of a few thousand. Thanks to a two-dimensional square lattice of holes, their reflectivity at normal incidence at 1064 nm reaches values as high as 95%. These two features, combined with the very low mass of the membrane, open the way to the use of such periodic structures as deformable end-mirrors in Fabry-Perot cavities for the investigation of cavity optomechanical effects
In the usual optomechanical systems, the stability of the systems severely limits those researches of the macroscopic quantum effects. We study an usual cavity optomechanical system where the frequency of the optical mode is shaken periodically. We find that, when the optical shaking frequency is large enough, the shake of the optical mode can stabilize the system. That means we can study the macroscopic quantum effects of the mechanical resonator even in the strong coupling region where the standard optomechanical systems are always unstable. As examples, we study the ground-state cooling of …
We theoretically propose and experimentally demonstrate coherent wavelength conversion of optical photons using photon-phonon translation in a cavity-optomechanical system. For an engineered silicon optomechanical crystal nanocavity supporting a 4 GHz localized phonon mode, optical signals in a 1.5 MHz bandwidth are coherently converted over a 11.2 THz frequency span between one cavity mode at wavelength 1460 nm and a second cavity mode at 1545 nm with a 93% internal (2% external) peak efficiency. The thermal and quantum limiting noise involved in the conversion process is also analyzed, and i…
We describe an optomechanical device consisting of a fiber-based optical cavity containing a silicon nitiride membrane. In comparison with typical free-space cavities, the fiber-cavity's small mode size (10 μm waist, 80 μm length) allows the use of smaller, lighter membranes and increases the cavity-membrane linear coupling to 3 GHz/nm and quadratic coupling to 20 GHz/nm^2. This device is also intrinsically fiber-coupled and uses glass ferrules for passive alignment. These improvements will greatly simplify the use of optomechanical systems, particularly in cryogenic settings. At room temperat…
We review and study the roles of quantum and classical fluctuations in recent cavity-optomechanical experiments which have now reached the quantum regime (mechanical phonon occupancy < 1) using resolved sideband laser cooling. In particular, both the laser noise heating of the mechanical resonator and the form of the optically transduced mechanical spectra, modified by quantum and classical laser noise squashing, are derived under various measurement conditions. Using this theory, we analyze our recent ground-state laser cooling and motional sideband asymmetry experiments with nanoscale optome…
Optomechanical cavities in the well-resolved-sideband regime are ideally suited for the study of a myriad of quantum phenomena with mechanical systems, including backaction-evading measurements, mechanical squeezing, and generation of non-classical states. For these experiments, the mechanical oscillator should be prepared in its ground state; residual motion beyond the zero-point motion must be negligible. The requisite cooling of the mechanical motion can be achieved using the radiation pressure of light in the cavity by selectively driving the anti-Stokes optomechanical transition. To date,…
We theoretically study the transmission of a weak probe field under the influence of a strong pump field in a coupled nanomechanical resonator-superconducting microwave cavity system. Using the standard input-output theory, we find that both pulse delay (slow light effect) and advancement (fast light effect) of the probe field can appear in this coupled system provided that we choose the suitable detuning of the pump field from cavity resonance. The magnitude of the delay (advancement) can be tuned continuously by adjusting the power of the pump field. This technique demonstrates great potenti…
We propose a scheme able to generate stationary continuous variable entanglement between an optical and a microwave cavity mode by means of their common interaction with a micro-mechanical resonator. We show that when both cavities are intensely driven one can generate bipartite entanglement between any pair of the tripartite system, and that, due to entanglement sharing, optical-microwave entanglement is efficiently generated at the expense of microwave-mechanical and opto-mechanical entanglement.
We study entanglement of the cavity modes in a double-cavity optomechanical system in strong-coupling regime. The system consists of two optomechanical systems coupled by a single photon hopping between them. With the radiation pressure of the photon, entanglement of the cavity modes can be generated. The concurrence between the cavity modes is at least twice larger than that between the mechanical modes. Moreover, when we change the ratio between coupling strength and resonant frequency of mechanical modes, the entanglement in cavity and mechanical modes are influenced differently.
We study the cavity mode frequencies of a Fabry-Pérot cavity containing two vibrating dielectric membranes. We derive the equations for the mode resonances and provide approximate analytical solutions for them as a function of the membrane positions, which act as an excellent approximation when the relative and center-of-mass position of the two membranes are much smaller than the cavity length. With these analytical solutions, one finds that extremely large optomechanical coupling of the membrane relative motion can be achieved in the limit of highly reflective membranes when the two membrane…
We study how an optical parametric amplifier inside the cavity can affect the normal mode splitting behavior of the coupled movable mirror and the cavity field. We work in the resolved sideband regime. The spectra exhibit a double-peak structure as the parametric gain is increased. Moreover, for a fixed parametric gain, the double-peak structure of the spectrum is more pronounced with increasing the input laser power. We give results for mode splitting. The widths of the split lines are sensitive to parametric gain.
We present an atom-chip-based realization of quantum cavity optomechanics with cold atoms localized within a Fabry-Perot cavity. Effective sub-wavelength positioning of the atomic ensemble allows for tuning the linear and quadratic optomechanical coupling parameters, varying the sensitivity to the displacement and strain of a compressible gaseous cantilever. We observe effects of such tuning on cavity optical nonlinearity and optomechanical frequency shifts, providing their first characterization in the quadratic-coupling regime.
We study the dynamics of a driven optomechanical cavity coupled to a charged nanomechanical resonator via Coulomb interaction, in which the tunable double optomechanically induced transparency (OMIT) can be observed from the output field at the probe frequency by controlling the strength of the Coulomb interaction. We calculate the splitting of the two transparency windows, which varies near linearly with the Coulomb coupling strength in a robust way against the cavity decay. Our double-OMIT is much different from previously mentioned double-EIT and can be applied to measure Coulomb coupling s…
The mechanical properties of light have found widespread use in the manipulation of gas-phase atoms and ions, helping create new states of matter and realize complex quantum interactions. The field of cavity-optomechanics strives to scale this interaction to much larger, even human-sized mechanical objects. Going beyond the canonical Fabry-Perot cavity with a movable mirror, here we explore a new paradigm in which multiple cavity-optomechanical elements are wired together to form optomechanical circuits. Using a pair of optomechanical cavities coupled together via a phonon waveguide we demonst…
Optomechanical arrays made of structured flexible dielectrics are a promising system for exploring quantum and many-body optomechanical phenomena. We generalize investigations of the optomechanical properties of periodic arrays of one-dimensional scatterers in optical resonators to the case of vibrating membranes whose thickness is not necessarily small with respect to the optical wavelength of interest. The array optical transmission spectrum and its optomechanical coupling with a linear Fabry-Perot cavity field are investigated both analytically and numerically.
Using carefully designed hybrid metal-dielectric resonators, we study molecular optomechanics in the strong coupling regime ($g_{\rm }^2/ω_m {>} κ$), which manifests in anharmonic emission lines in the sideband-resolved region of the cavity-emitted spectrum ($κ{<}ω_m$). This nonlinear optomechanical strong coupling regime is enabled through a metal-dielectric cavity system that yields not only deep sub-wavelength plasmonic confinement, but also dielectric-like confinement times that are more than two orders of magnitude larger than those from typical localized plasmon modes. These hybrid metal…
We describe a cavity QED analogue for the coupling system of a spin and a nanomechanical resonator with a magnetic tip. For the quantized nanomechanical resonator, a spin-boson model for this coupling system can refer to a Jaynes-Cummings(JC) or an anti-JC model. These observations predict some quantum optical phenomena, such as squeezing and "collapse-revival" in the single oscillation mode of the nanomechanical resonator when it is initially prepared in the quasi-classical state. By modulating the phase of RF magnetic field one can switch the system between the JC and anti-JC model, which pr…
We propose a versatile, free-space cavity optomechanics platform built from two photonic crystal membranes, one of which is freely suspended, and designed to form a microcavity less than one wavelength long. This cavity features a series of photonic bound states in the continuum that, in principle, trap light forever and can be favorably used together with evanescent coupling for realizing various types of optomechanical couplings, such as linear or quadratic coupling of either dispersive or dissipative type, by tuning the photonic crystal patterning and cavity length. Crucially, this platform…
We study Stokes and anti-Stokes processes in cavity optomechanics in the regime of strong coupling. The Stokes and anti-Stokes signals exhibit prominently the normal-mode splitting. We report gain for the Stokes signal. We also report lifetime splitting when the pump power is less than the critical power for normal-mode splitting. The nonlinear Stokes processes provide a useful method for studying strong coupling regime of cavity optomechanics. We also investigate the correlations between the Stokes and anti-Stokes photons produced spontaneously by the optomechanical system. At zero temperatur…
We study the photon statistics of a cavity linearly coupled to an optomechanical system via second order correlation functions. Our calculations show that the cavity can exhibit strong photon antibunching even when optomechanical interaction in the optomechanical system is weak. The cooperation between the weak optomechanical interaction and the destructive interference between different paths for two-photon excitation leads to the efficient antibunching effect. Compared with the standard optomechanical system, the coupling between a cavity and an optomechanical system provides a method to rel…
Using electromagnetically induced transparency we show how the opto-mechanical systems can be used both as memory elements as well as for the transduction of optical fields. We use a double cavity optomechanical system which facilitates such applications. By tuning the frequency of the second cavity one can produce output fields at a variety of frequencies. We present analytical results for the steady state behavior which is controlled by the power and the detuning of the field driving the second cavity.
We investigate nonlinear effects in an electromechanical system consisting of a superconducting charge qubit coupled to transmission line resonator and a nanomechanical oscillator, which in turn is coupled to another transmission line resonator. The nonlinearities induced by the superconducting qubit and the optomechanical coupling play an important role in creating optomechanical entanglement as well as the squeezing of the transmitted microwave field. We show that strong squeezing of the microwave field and robust optomechanical entanglement can be achieved in the presence of moderate therma…
Mechanical rotation and oscillation have far lower frequencies than light does; thus they are not coupled to each other conventionally. In this Letter, we show the torsional mechanical oscillation of an optical cavity can be coupled to the optical modes by introducing birefringence, which produces nondegenerate modes in the cavity: ordinary and extraordinary rays. Twisting the cavity mixes them and modulates the electromagnetic energy. We find torsional optomechanical Hamiltonian by quantising the total energy and reveal the torsional oscillation can be resonantly driven by light.
The mechanical influence on objects due to their interaction with light has been a central topic in atomic physics for decades. Thus, one finds that many concepts developed to describe cavity optomechanical systems with solid-state mechanical oscillators have also been developed in parallel in relation to cold atomic physics. I describe several of these ideas from atomic physics, including optical methods for detecting quantum states of single cold atoms and atomic ensembles, motional effects within single-atom cavity quantum electrodynamics, and collective optical effects such as superradiant…
Dynamical backaction has proven to be a versatile tool in cavity optomechanics, allowing for precise manipulation of a mechanical resonator's motion using confined optical photons. In this work, we present measurements of a silicon whispering-gallery-mode optomechanical cavity where backaction originates from opposing radiation pressure and photothermal forces, with the former dictating the optomechanical spring effect and the latter governing the optomechanical damping. At high enough optical input powers, we show that the photothermal force drives the mechanical resonator into self-oscillati…
We present an experimental study of an optomechanical system formed by a vibrating thin semi-transparent membrane within a high-finesse optical cavity. We show that the coupling between the optical cavity modes and the vibrational modes of the membrane can be tuned by varying the membrane position and orientation. In particular we demonstrate a large quadratic dispersive optomechanical coupling in correspondence with avoided crossings between optical cavity modes weakly coupled by scattering at the membrane surface. The experimental results are well explained by a first order perturbation trea…
We demonstrate the existence of the phenomenon of the inverse electromagnetically induced transparency (IEIT) in an opto mechanical system consisting of a nanomechanical mirror placed in an optical cavity. We show that two weak counter-propagating identical classical probe fields can be completely absorbed by the system in the presence of a strong coupling field so that the output probe fields are zero. The light is completely confined inside the cavity and the energy of the incoming probe fields is shared between the cavity field and creation of a coherent phonon and resides primarily in one …
Here, we study the controllable optical responses in a two-cavity optomechanical system, especially on the $\mathit{perfect}$ optomechanically induced transparency (OMIT) in the model which has never been studied before. The results show that the perfect OMIT can still occur even with a large mechanical damping rate, and at the perfect transparency window the long-lived slow light can be achieved. In addition, we find that the conversion between the perfect OMIT and optomechanically induced absorption can be easily achieved just by adjusting the driving field strength of the second cavity. We …
We study the optomechanically induced amplification and perfect transparency in a double-cavity optomechanical system. We find if two control lasers with appropriate amplitudes and detunings are applied to drive the system, the phenomenon of optomechanically induced amplification for a probe laser can occur. In addition, perfect optomechanically induced transparency phenomenon, which is robust to mechanical dissipation, can be realized by the same type of drive. These results are very important for signal amplification, light storage, fast light and slow light in the quantum information proces…
We propose a scheme that can generate tunable optomechanically induced transparency in a hybrid piezooptomechanical cavity system. The system is composed of a high-quality planar distributed Bragg reflector cavity modified with an embedded Gaussian-shaped defect. Moreover, interdigitated transducers are fabricated on the surface of the cavity to generate surface acoustic waves. Under the actuation of the surface acoustic wave, the upper Bragg mirrors can be vibrated as a bulk acoustic resonator, and the distributed Bragg reflector cavity becomes a standard three-level optomechanical system. In…
We investigate theoretically the effect of optical feedback from a cavity containing an ultracold two level atomic ensemble, on the bistable behavior shown by mean intracavity optical field and the ground state cooling effect of the mechanical oscillator in an optomechanical cavity resonator. The optical bistability can be controlled by tuning the frequency and power of the single driving laser as well as by varying the atom-cavity coupling strength in the atomic cavity. Study of the cooling of the mechanical oscillator, in both good and bad cavity limits, reveals that the hybrid system is mor…
We experimentally study an optomechanical cavity consisting of an oscillating mechanical resonator embedded in a superconducting microwave transmission line cavity. Tunable optomechanical coupling between the mechanical resonator and the microwave cavity is introduced by positioning a niobium-coated single mode optical fiber above the mechanical resonator. The capacitance between the mechanical resonator and the coated fiber gives rise to optomechanical coupling, which can be controlled by varying the fiber-resonator distance. We study radiation pressure induced self-excited oscillations as a …
Electromagnetically induced transparency has great theoretical and experimental importance in many physics subjects, such as atomic physics, quantum optics, and more recent cavity optomechanics. Optical delay is the most prominent feature of electromagnetically induced transparency, and in cavity optomechanics optical delay is limited by mechanical dissipation rate of sideband-resolved mechanical modes. Here we demonstrate a cascaded optical transparency scheme by leveraging the parametric phonon-phonon coupling in a multimode optomechanical system, where a low damping mechanical mode in the u…
We show that a cavity optomechanical system formed by a mechanical resonator simultaneously coupled to two modes of an optical cavity can be used for the implementation of a deterministic quantum phase gate between optical qubits associated with the two intracavity modes. The scheme is realizable for sufficiently strong single-photon optomechanical coupling in the resolved sideband regime, and is robust against cavity losses.
We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in principle, any photonic chip with refractive index greater than that of the optical fiber. Here we demonstrate single-sided cavity coupling with a total fiber-to-cavity optical power coupling efficiency of…
We study the optical cooling of the resonator mirror in a cavity-optomechanical system that contains an optical gain medium. We find that the optical damping rate is vanishingly small for an incoherently pumped laser above threshold. In the presence of an external coherent drive however, the optical damping rate can be enhanced substantially with respect to that of a passive cavity. We show that the strength of the incoherent pump provides a conduit to tune the damping rate and the minimum attainable phonon number with the same radiation pressure force, and the latter can be lowered from that …
