Radiofrequency emission in the 0.4 - 3 GHz range from FTU plasmas in presence of runaway electrons (RE) has been measured with unprecedentedly high time resolution. Rapid emission bursts associated with enhanced RE pitch angle scattering reveal kinetic instabilities affecting evolution of the RE population from the buildup phase. Such measurements also provide a sensitive monitor for instabilities during early RE formation. The leading edge of radio bursts is much shorter than interleaving periods of low emission; spectral broadening during growth indicates nonlinear wave coupling as an explanation for the observed intermittency. Radiofrequency emission disappears at the beginning of post-disruption RE plateaus, and subsequently reappears in the shape of very intense bursts accompanied by strong rises of suprathermal electron cyclotron emission.
Energy losses in a magnetic nozzle radiofrequency plasma thruster are investigated to improve the thruster efficiency, which are calculated from particle energy losses in fully kinetic simulations. The simulations calculate particle energy fluxes with a vector resolution including the plasma energy lost to the dielectric wall, the plasma beam energy, and the divergent plasma energy in addition to collisional energy losses. As a result, distributions of energy losses in the thruster and the ratios of the energy losses to the input power are obtained. The simulation results show that the plasma …
Optical diagnostics and mass spectrometry on the afterglow of an atmospheric pressure Ar/O$_2$ radiofrequency plasma used for polymer surface treatment
In this manuscript, a fluid model is utilized to calculate the density of plasma species assuming geometrically symmetric Ar/CF4 Radiofrequency Capacitively Coupled Plasmas. The electrodes are driven by a sinusoidal waefront with an amplitude of 200 V and a frequency of 13.56 MHz. The gap between the electrodes is 5cm. The plasma species density is calculated as a function of the gas pressure, electron temperature, and the gas composition. In a good agreement with recent experimental results, $CF^+_3$ and F are dominant for all considered simulation parameters. The results explain the pathways…
In a post-thermal-quench plasma, mitigated or unmitigated, the plasma power balance is mostly between collisional or Ohmic heating and plasma radiative cooling. In a plasma of atomic mixture $\{n_α\}$ with $α$ labeling the atomic species, the power balance sets the plasma temperature, ion charge state distribution $\{n_α^i\}$ with $i$ the charge number, and through the electron temperature $T_e$ and ion charge state distribution $\{n_α^i\},$ the parallel electric field $E_\parallel.$ Since the threshold electric field for runaway avalanche growth $E_{av}$ is also set by the atomic mixture, ion…
Plasma terminating disruptions in tokamaks may result in relativistic runaway electron beams with potentially serious consequences for future devices with large plasma currents. In this paper we investigate the effect of plasma elongation on the coupled dynamics of runaway generation and resistive diffusion of the electric field. We find that elongated plasmas are less likely to produce large runaway currents, partly due to the lower induced electric fields associated with larger plasmas, and partly due to direct shaping effects, which mainly lead to a reduction in the runaway avalanche gain.
Tokamak start-up is characterized by low electron densities and strong electric fields, in order to quickly raise the plasma current and temperature, allowing the plasma to fully ionize and magnetic flux surfaces to form. Such conditions are ideal for the formation of superthermal electrons, which may reduce the efficiency of ohmic heating and prevent the formation of a healthy thermal fusion plasma. This is of particular concern in ITER where engineering limitations put restrictions on the allowable electric fields and limit the prefill densities during start-up. In this study, we present a n…
For the simulation of disruptions in tokamak fusion plasmas, a fluid model describing the evolution of relativistic runaway electrons and their interaction with the background plasma is presented. The overall aim of the model is to self-consistently describe the nonlinear coupled evolution of runaway electrons (REs) and plasma instabilities during disruptions. In this model, the runaway electrons are considered as a separate fluid species in which the initial seed is generated through the Dreicer source, which eventually grows by the avalanche mechanism (further relevant source mechanisms can …
The full melting of a two-dimensional plasma crystal was induced in a principally stable monolayer by localized laser stimulation. Two distinct behaviors of the crystal after laser stimulation were observed depending on the amount of injected energy: (i) below a well-defined threshold, the laser melted area recrystallized; (ii) above the threshold, it expanded outwards in a similar fashion to mode-coupling instability induced melting, rapidly destroying the crystalline order of the whole complex plasma monolayer. The reported experimental observations are due to the fluid mode-coupling instabi…
Disruptions in tokamak plasmas may lead to the generation of runaway electrons that have the potential to damage plasma-facing components. Improved understanding of the runaway generation process requires interpretative modelling of experiments. In this work we simulate eight discharges in the ASDEX Upgrade and JET tokamaks, where argon gas was injected to trigger the disruption. We use a fluid modelling framework with the capability to model the generation of runaway electrons through the hot-tail, Dreicer and avalanche mechanisms, as well as runaway electron losses. Using experimentally base…
Synchrotron radiation observed from runaway electrons (REs) in tokamaks depends upon the position and size of the RE beam, the RE energy and pitch distributions, as well as the location of the observer. We show that experimental synchrotron images of a vertically moving runaway electron beam sweeping past the detector in the TCV tokamak agree well with predictions from the synthetic synchrotron diagnostic Soft. This experimental validation lends confidence to the theory underlying the synthetic diagnostics which are used for benchmarking theoretical models of and probing runaway dynamics. We p…
The formation of a substantial post-disruption runaway electron current in ASDEX Upgrade material injection experiments is determined by avalanche multiplication of a small seed population of runaway electrons. For the investigation of these scenarios, the runaway electron description of the coupled 1.5D transport solvers ASTRA-STRAHL is amended by a fluid-model describing electron runaway caused by the hot-tail mechanism. Applied in simulations of combined background plasma evolution, material injection, and runaway electron generation in ASDEX Upgrade discharge #33108, both the Dreicer and h…
The safe operation of tokamak reactors requires a reliable modeling capability of disruptions, and in particular the spatio-temporal dynamics of associated runaway electron currents. In a disruption, instabilities can break up magnetic surfaces into chaotic field line regions, causing current profile relaxation, as well as a rapid radial transport of heat and particles. Using a mean-field helicity transport model implemented in the disruption runaway modeling framework DREAM, we calculate the dynamics of runaway electrons in the presence of current relaxation events. In scenarios where flux su…
Benign termination of mega-ampere (MA) level runaway current has been convincingly demonstrated in recent JET and DIII-D experiments, establishing it as a leading candidate for runaway mitigation on ITER. This comes in the form of a runaway flush by parallel streaming loss along stochastic magnetic field lines formed by global magnetohydrodynamic instabilities, which are found to correlate with a low-Z injection that purges the high-Z impurities from a post-thermal-quench plasma. Here we show the competing physics that govern the post-flush reconstitution of the runaway current in a ITER-like …
Avoidance of the harmful effects of runaway electrons (REs) in plasma-terminating disruptions is pivotal in the design of safety systems for magnetic fusion devices. Here, we describe a computationally efficient numerical tool, that allows for self-consistent simulations of plasma cooling and associated RE dynamics during disruptions. It solves flux-surface averaged transport equations for the plasma density, temperature and poloidal flux, using a bounce-averaged kinetic equation to self-consistently provide the electron current, heat, density and RE evolution, as well as the electron distribu…
The electron runaway phenomenon in plasmas depends sensitively on the momentum-space dynamics. However, efficient simulation of the global evolution of systems involving runaway electrons typically requires a reduced fluid description. This is needed for example in the design of essential runaway mitigation methods for tokamaks. In this paper, we present a method to include the effect of momentum-dependent spatial transport in the runaway avalanche growth rate. We quantify the reduction of the growth rate in the presence of electron diffusion in stochastic magnetic fields and show that the spa…
Integrated modelling of electron runaway requires computationally expensive kinetic models that are self-consistently coupled to the evolution of the background plasma parameters. The computational expense can be reduced by using parameterized runaway generation rates rather than solving the full kinetic problem. However, currently available generation rates neglect several important effects; in particular, they are not valid in the presence of partially ionized impurities. In this work, we construct a multilayer neural network for the Dreicer runaway generation rate which is trained on data o…
Steering tokamak plasmas is commonly viewed as a way to avoid disruptions and runaway electrons. Plasma steering sounds as safe as driving to work but will be shown to more closely resemble driving at high speed through a dense fog on an icy road. The long time required to terminate an ITER discharge compared to time over which dangers can be foreseen is analogous to driving in a dense fog. The difficulty of regaining plasma control if it is lost resembles driving on an icy road. Disruptions and runaways are associated with three issues -- a solution to one tends to complicate the solution to …
Runaway electron populations seeded from the hot-tail generated by the rapid cooling in plasma-terminating disruptions are a serious concern for next-step tokamak devices such as ITER. Here, we present a comprehensive treatment of the thermal quench, including the superthermal electron dynamics, heat and particle transport, atomic physics, and radial losses due to magnetic perturbations: processes that are strongly linked and essential for the evaluation of the runaway seed in disruptions mitigated by material injection. We identify limits on the injected impurity density and magnetic perturba…
The reconstruction of the distribution function of runaway electrons (RE) in magnetically confined fusion plasmas gives insights on the runaway electron beam dynamics during plasma disruptions. In view of enabling a two-dimensional, energy-pitch reconstruction of the RE velocity space, in this work we present a calculation of the weight functions for the bremsstrahlung emission by the REs. The weight functions allow bridging the bremsstrahlung spectrum with the RE velocity space, as they tell the region of the velocity space that contributes to a particular spectral measurement. The results ar…
In high-current tokamak devices such as ITER, a runaway avalanche can cause a large amplification of a seed electron population. We show that disruption mitigation by impurity injection may significantly increase the runaway avalanche growth rate in such devices. This effect originates from the increased number of target electrons available for the avalanche process in weakly ionized plasmas, which is only partially compensated by the increased friction force on fast electrons. We derive an expression for the avalanche growth rate in partially ionized plasmas and investigate the effects of imp…
The potential formation of multi-mega-ampere beams of relativistic "runaway" electrons (REs) during sudden terminations of tokamak plasmas poses a significant challenge to the tokamak's development as a fusion energy source. Here, we use state-of-the-art modeling of disruption magnetohydrodynamics coupled with a self-consistent evolution of RE generation and transport to show that a non-axisymmetric in-vessel coil will passively prevent RE beam formation during disruptions in the SPARC tokamak, a compact, high-field, high-current device capable of achieving a fusion gain Q > 2 in deuterium-tri…
We present the first successful simulation of a induced disruption in ASDEX Upgrade from massive material injection (MMI) up to established runaway electron (RE) beam, thus covering pre-thermal quench, thermal quench and current quench (CQ) of the discharge. For future high-current fusion devices such as ITER, the successful suppression of REs through MMI is of critical importance to ensure the structural integrity of the vessel. To computationally study the interplay between MMI, background plasma response, and RE generation, a toolkit based on the 1.5D transport code coupling ASTRA-STRAHL is…
