A wireless network operator typically divides the radio spectrum it possesses into a number of subbands. In a cellular network those subbands are then reused in many cells. To mitigate co-channel interference, a joint spectrum and power allocation problem is often formulated to maximize a sum-rate objective. The best known algorithms for solving such problems generally require instantaneous global channel state information and a centralized optimizer. In fact those algorithms have not been implemented in practice in large networks with time-varying subbands. Deep reinforcement learning algorithms are promising tools for solving complex resource management problems. A major challenge here is that spectrum allocation involves discrete subband selection, whereas power allocation involves continuous variables. In this paper, a learning framework is proposed to optimize both discrete and continuous decision variables. Specifically, two separate deep reinforcement learning algorithms are designed to be executed and trained simultaneously to maximize a joint objective. Simulation results show that the proposed scheme outperforms both the state-of-the-art fractional programming algorithm and a previous solution based on deep reinforcement learning.
Scheduling plays a pivotal role in multi-user wireless communications, since the quality of service of various users largely depends upon the allocated radio resources. In this paper, we propose a novel scheduling algorithm with contiguous frequency-domain resource allocation (FDRA) based on deep reinforcement learning (DRL) that jointly selects users and allocates resource blocks (RBs). The scheduling problem is modeled as a Markov decision process, and a DRL agent determines which user and how many consecutive RBs for that user should be scheduled at each RB allocation step. The state space,…
Cellular offloading in device-to-device communication is a challenging optimisation problem in which the improved allocation of radio resources can increase spectral efficiency, energy efficiency, throughout and reduce latency. The academic community have explored different optimisation methods on these problems and initial results are encouraging. However, there exists significant friction in the lack of a simple, configurable, open-source framework for cellular offload research. Prior research utilises a variety of network simulators and system models, making it difficult to compare results.…
The research efforts on cellular vehicle-to-everything (V2X) communications are gaining momentum with each passing year. It is considered as a paradigm-altering approach to connect a large number of vehicles with minimal cost of deployment and maintenance. This article aims to further push the state-of-the-art of cellular V2X communications by providing an optimization framework for wireless charging, power allocation, and resource block assignment. Specifically, we design a network model where roadside objects use wireless power from RF signals of electric vehicles for charging and informatio…
In this paper, we study an energy efficiency maximization problem in uplink for D2D communications underlaid with cellular networks on multiple bands. Utilizing stochastic geometry, we derive closed-form expressions for the average sum rate, successful transmission probability, and energy efficiency of cellular and D2D users. Then, we formulate an optimization problem to jointly maximize the energy efficiency of D2D and cellular users and obtain optimum transmission power of both D2D and cellular users. In the optimization problem, we guarantee the QoS of users by taking into account the succe…
Device-to-device (D2D) and non-orthogonal multiple access (NOMA) are promising technologies to meet the challenges of the next generations of mobile communications in terms of network density and diversity for internet of things (IoT) services. This paper tackles the problem of maximizing the D2D sum-throughput in an IoT system underlaying a cellular network, through optimal channel and power allocation. NOMA is used to manage the interference between cellular users and full-duplex (FD) IoT devices. To this aim, mutual successive interference cancellation (SIC) conditions are identified to all…
This paper considers the joint power control and resource allocation for a device-to-device (D2D) underlay cellular system with a multi-antenna BS employing ADCs with different resolutions. We propose a four-step algorithm that optimizes the ADC resolution profile at the base station (BS) to reduce the energy consumption and perform joint power control and resource allocation of D2D communication users (DUEs) and cellular users (CUEs) to improve the D2D reliability.
Cellular-connected unmanned aerial vehicle (UAV) has attracted a surge of research interest in both academia and industry. To support aerial user equipment (UEs) in the existing cellular networks, one promising approach is to assign a portion of the system bandwidth exclusively to the UAV-UEs. This is especially favorable for use cases where a large number of UAV-UEs are exploited, e.g., for package delivery close to a warehouse. Although the nearly line-of-sight (LoS) channels can result in higher powers received, UAVs can in turn cause severe interference to each other in the same frequency …
For Device-to-device (D2D) communication of Internet-of-Things (IoT) enabled 5G system, there is a limit to allocating resources considering a complicated interference between different links in a centralized manner. If D2D link is controlled by an enhanced node base station (eNB), and thus, remains a burden on the eNB and it causes delayed latency. This paper proposes a fully autonomous power allocation method for IoT-D2D communication underlaying cellular networks using deep learning. In the proposed scheme, an IoT-D2D transmitter decides the transmit power independently from an eNB and othe…
The rapid development of the fifth generation mobile communication systems accelerates the implementation of vehicle-to-everything communications. Compared with the other types of vehicular communications, vehicle-to-vehicle (V2V) communications mainly focus on the exchange of driving safety information with neighboring vehicles, which requires ultra-reliable and low-latency communications (URLLCs). However, the frame size is significantly shortened in V2V URLLCs because of the rigorous latency requirements, and thus the overhead is no longer negligible compared with the payload information fr…
Cellular vehicle-to-everything (V2X) communication is crucial to support future diverse vehicular applications. However, for safety-critical applications, unstable vehicle-to-vehicle (V2V) links and high signalling overhead of centralized resource allocation approaches become bottlenecks. In this paper, we investigate a joint optimization problem of transmission mode selection and resource allocation for cellular V2X communications. In particular, the problem is formulated as a Markov decision process, and a deep reinforcement learning (DRL) based decentralized algorithm is proposed to maximiz…
Unmanned aerial vehicles (UAVs) can provide an effective solution for improving the coverage, capacity, and the overall performance of terrestrial wireless cellular networks. In particular, UAV-assisted cellular networks can meet the stringent performance requirements of the fifth generation new radio (5G NR) applications. In this paper, the problem of energy-efficient resource allocation in UAV-assisted cellular networks is studied under the reliability and latency constraints of 5G NR applications. The framework of ruin theory is employed to allow solar-powered UAVs to capture the dynamics o…
Future wireless cellular networks must support both enhanced mobile broadband (eMBB) and ultra reliable low latency communication (URLLC) to manage heterogeneous data traffic for emerging wireless services. To achieve this goal, a promising technique is to enable flexible frame structure by dynamically changing the data frame's numerology according to the channel information as well as traffic quality of service requirements. However, due to nonorthogonal subcarriers, this technique can result in an interference, known as inter numerology interference (INI), thus, degrading the network perform…
Cellular networks are expected to be the main communication infrastructure to support the expanding applications of Unmanned Aerial Vehicles (UAVs). As these networks are deployed to serve ground User Equipment (UES), several issues need to be addressed to enhance cellular UAVs'services.In this paper, we propose a realistic communication model on the downlink,and we show that the Quality of Service (QoS)for the users is affected by the number of interfering BSs and the impact they cause. The joint problem of sub-carrier and power allocation is therefore addressed. Given its complexity, which i…
This paper studies the benefits of incorporating underlaid full-duplex (FD) device-to-device (D2D) communications into massive multiple-input-multiple-output (MIMO) downlink systems. Due to the nature of cellular downlink and FD D2D transmission, the performances of cellular and D2D services are severely impaired due to high interference caused by base-stations (BSs) and D2D transceivers. As a consequence, integrating a large number of D2D links into exiting cellular networks might degrade the system performances. To overcome this challenge, utilizing the large uniform linear array (ULA) equip…
Physical layer security (PLS) techniques can help to protect wireless networks from eavesdropper attacks. In this paper, we consider the authentication technique that uses fingerprint embedding to defend 5G cellular networks with unmanned aerial vehicle (UAV) systems from eavesdroppers and intruders. Since the millimeter wave (mmWave) cellular networks use narrow and directional beams, PLS can take further advantage of the 3D spatial dimension for improving the authentication of UAV users. Considering a multi-user mmWave cellular network, we propose a power allocation technique that jointly ta…
In this paper, we consider a single-cell cellular network with a number of cellular users (CUs) and unmanned aerial vehicles (UAVs), in which multiple UAVs upload their collected data to the base station (BS). Two transmission modes are considered to support the multi-UAV communications, i.e., UAV-to-infrastructure (U2I) and UAV-to-UAV (U2U) communications. Specifically, the UAV with a high signal to noise ratio (SNR) for the U2I link uploads its collected data directly to the BS through U2I communication, while the UAV with a low SNR for the U2I link can transmit data to a nearby UAV through …
Heterogeneous network is a novel network architecture proposed in Long-Term-Evolution~(LTE), which highly increases the capacity and coverage compared with the conventional networks. However, in order to provide the best services, appropriate resource management must be applied. In this paper, we consider the joint optimization problem of user association, subchannel allocation, and power allocation for downlink transmission in Multi-cell Multi-association Orthogonal Frequency Division Multiple Access (OFDMA) heterogeneous networks. To solve the optimization problem, we first divide it into tw…
Reconfigurable intelligent surface (RIS) is a revolutionary technology for sixth-generation (6G) networks owing to its ability to manipulate wireless environments. As a frequency-selective device, RIS can only effectively shape the propagation of signals within a certain frequency band. Due to this frequency-selective property, the deployment of RIS in cellular networks will introduce a complicated base station (BS)-RIS-user association issue since adjacent BSs operate at different frequency bands. In this paper, with the consideration of the frequency-selective characteristics of RIS, we aim …
Supporting reliable and seamless mobility for aerial users, such as unmanned aerial vehicles (UAVs), is a key challenge for the next-generation cellular systems. To tackle this challenge, we propose a joint beamforming, user association, and UAV-height control framework for cellular-connected multi-UAV networks with multiple antenna base stations (BSs). With the aim of maximizing the minimum achievable rate for UAVs subject to co-existed terrestrial user equipment's rate constraints, we devise a hierarchical bi-layer iterative algorithm to optimize BSs' beamforming vectors, UAV association mat…
This paper addresses join wireless and computing resource allocation in mobile edge computing (MEC) systems with several access points and with the possibility that users connect to many access points, and utilize the computation capability of many servers at the same time. The problem of sum transmission energy minimization under response time constraints is considered. It is proved, that the optimization problem is non-convex. The complexity of optimization of a part of the system parameters is investigated, and based on these results an Iterative Resource Allocation procedure is proposed, t…
Device to device communication has prevailed as an issue for small cell networks. Here we have implemented a new scheme that allows us to improve spectral capabilities of mobiles communicating with each other (peer to peer network) for downlink cellular network. Previously the spectral capabilities were handled by Reverse Iterative combinatorial auction mechanism, where the cellular uses used to bid for d2d links. We have made a comparison between Reverse Iterative combinatorial Auction (R-ICA) and New Auction method on the basis of plots on sum rate over SINR and number of d2d users.
Optical wireless communication provides data transmission at high speeds which can satisfy the increasing demands for connecting a massive number of devices to the Internet. In this paper, vertical-cavity surface-emitting(VCSEL) lasers are used as transmitters due to their high modulation speed and energy efficiency. However, a high number of VCSEL lasers is required to ensure coverage where each laser source illuminates a confined area. Therefore, multiple users are classified into different sets according to their connectivity. Given this point, a transmission scheme that uses blind interfer…
The fifth-generation (5G) wireless cellular system, which would be deployed by 2020, is expected to deliver significantly higher capacity and better network performance compared to those of the current fourth-generation (4G) system. Specifically, it is predicted that tens of billions of wireless devices will be connected to the wireless network over the next few years, which results in an exponential explosion of mobile data traffic. Therefore, more advanced wireless architecture, as well as radical and innovative access technologies, must be proposed to meet this urgent increasing growth of m…
The fifth-generation (5G) and beyond networks are designed to efficiently utilize the spectrum resources to meet various quality of service (QoS) requirements. The unlicensed frequency bands used by WiFi are mainly deployed for indoor applications and are not always fully occupied. The cellular industry has been working to enable cellular and WiFi coexistence. In particular, 5G New Radio in unlicensed channel spectrum (NR-U) supports the uplink and downlink transmission on the maximum channel occupation time (MCOT) duration. In this paper, we consider maximizing the total throughput of both do…
Vehicle-to-everything (V2X) is a modern vehicular technology that improves conventional vehicle systems in traffic and communications. V2X communications demand energyefficient and high-reliability networking because of massive vehicular connections and high mobility wireless channels. Nonorthogonal multiple access (NOMA) is a promising solution for 5G V2X services that intend to guarantee high reliability, quality-of-service (QoS) provisioning, and massive connectivity requirements. In V2X, it is vital to inspect imperfect CSI because the high mobility of vehicles leads to more channel estima…
In order to achieve efficient communication in the fifth generation (5G) networks, non-orthogonal multiple access (NOMA) technique has been utilized in fog radio access networks (F-RANs). In this paper, we investigate the resource allocation problem in a NOMA-enabled downlink F-RAN. To maximize the weighted sum rate of NOMA users served by fog-computing-based access points (F-APs), the resource block (RB) allocation and power allocation are optimized. Specifically, we decouple the problem into RB allocation and power allocation problems. The former is modeled as a many-to-one matching game and…
Optimal allocation of shared resources is key to deliver the promise of jointly operating radar and communications systems. In this paper, unlike prior works which examine synergistic access to resources in colocated joint radar-communications or among identical systems, we investigate this problem for a distributed system comprising heterogeneous radars and multi-tier communications. In particular, we focus on resource allocation in the context of multi-target tracking (MTT) while maintaining stable communication connections. By simultaneously allocating the available power, dwell time and sh…
The deployment of ultra-dense networks is one of the main methods to meet the 5G data rate requirements. However, high density of independent small base stations (SBSs) will increase the interference within the network. To circumvent this interference, there is a need to develop self-organizing methods to manage the resources of the network. In this paper, we present a distributed power allocation algorithm based on multi-agent Q-learning in an interference-limited network. The proposed method leverages coordination through simple message passing between SBSs to achieve an optimal joint power …
Internet-of-Things (IoT) refers to a massively heterogeneous network formed through smart devices connected to the Internet. In the wake of disruptive IoT with a huge amount and variety of data, Machine Learning (ML) and Deep Learning (DL) mechanisms will play a pivotal role to bring intelligence to the IoT networks. Among other aspects, ML and DL can play an essential role in addressing the challenges of resource management in large-scale IoT networks. In this article, we conduct a systematic and in-depth survey of the ML- and DL-based resource management mechanisms in cellular wireless and I…
Intelligent reflecting surface (IRS) technology offers more feasible propagation paths for millimeter-wave (mmWave) communication systems to overcome blockage than existing technologies. In this paper, we consider a downlink wireless system with the IRS and formulate a joint power allocation and beamforming design problem to maximize the weighted sum-rate, which is a multi-variable optimization problem. To solve the problem, we propose a novel alternating manifold optimization based beamforming algorithm. Simulation results show that our proposed optimization algorithm outperforms existing alg…
Nowadays, Unmanned Aerial Vehicles (UAVs) have been significantly improved, and one of their most important applications is to provide temporary coverage for cellular users. Static Base Station cannot service all users due to temporary crashes because of temporary events such as ground BS breakdowns, bad weather conditions, natural disasters, transmission errors, etc., drones equipped with small cellular BS. The Drone Base Station is immediately sent to the target location and establishes the necessary communication links without requiring any predetermined infrastructure and covers that area.…
