In this paper, we study an energy efficiency maximization problem in uplink for D2D communications underlaid with cellular networks on multiple bands. Utilizing stochastic geometry, we derive closed-form expressions for the average sum rate, successful transmission probability, and energy efficiency of cellular and D2D users. Then, we formulate an optimization problem to jointly maximize the energy efficiency of D2D and cellular users and obtain optimum transmission power of both D2D and cellular users. In the optimization problem, we guarantee the QoS of users by taking into account the success transmission probability on each link. To solve the problem, first we convert the problem into canonical convex form. Afterwards, we solve the problem in two phases, energy efficiency maximization of devices and energy efficiency maximization of cellular users. In the first phase, we maximize the energy efficiency of D2D users and feed the solution to the second phase where we maximize the energy efficiency of cellular users. Simulation results reveal that significant energy efficiency can be attained e.g., 10% energy efficiency improvement compared to fix transmission power in high density scenario.
This paper studies the benefits of incorporating underlaid full-duplex (FD) device-to-device (D2D) communications into massive multiple-input-multiple-output (MIMO) downlink systems. Due to the nature of cellular downlink and FD D2D transmission, the performances of cellular and D2D services are severely impaired due to high interference caused by base-stations (BSs) and D2D transceivers. As a consequence, integrating a large number of D2D links into exiting cellular networks might degrade the system performances. To overcome this challenge, utilizing the large uniform linear array (ULA) equip…
In this paper, we aim to secure the D2D communication of the D2D-underlaid cellular network by leveraging covert communication to hide its presence from the vigilant adversary. In particular, there are adversaries aiming to detect D2D communications based on their received signal powers. To avoid being detected, the legitimate entity, i.e., D2D-underlaid cellular network, performs power control so as to hide the presence of the D2D communication. We model the combat between the adversaries and the legitimate entity as a two-stage Stackelberg game. Therein, the adversaries are the followers and…
This paper proposes to deploy multiple reconfigurable intelligent surfaces (RISs) in device-to-device (D2D)-underlaid cellular systems. The uplink sum-rate of the system is maximized by jointly optimizing the transmit powers of the users, the pairing of the cellular users (CUs) and D2D links, the receive beamforming of the base station (BS), and the configuration of the RISs, subject to the power limits and quality-of-service (QoS) of the users. To address the non-convexity of this problem, we develop a new block coordinate descent (BCD) framework which decouples the D2D-CU pairing, power allo…
Device-to-device (D2D) and non-orthogonal multiple access (NOMA) are promising technologies to meet the challenges of the next generations of mobile communications in terms of network density and diversity for internet of things (IoT) services. This paper tackles the problem of maximizing the D2D sum-throughput in an IoT system underlaying a cellular network, through optimal channel and power allocation. NOMA is used to manage the interference between cellular users and full-duplex (FD) IoT devices. To this aim, mutual successive interference cancellation (SIC) conditions are identified to all…
This paper considers the joint power control and resource allocation for a device-to-device (D2D) underlay cellular system with a multi-antenna BS employing ADCs with different resolutions. We propose a four-step algorithm that optimizes the ADC resolution profile at the base station (BS) to reduce the energy consumption and perform joint power control and resource allocation of D2D communication users (DUEs) and cellular users (CUEs) to improve the D2D reliability.
The research efforts on cellular vehicle-to-everything (V2X) communications are gaining momentum with each passing year. It is considered as a paradigm-altering approach to connect a large number of vehicles with minimal cost of deployment and maintenance. This article aims to further push the state-of-the-art of cellular V2X communications by providing an optimization framework for wireless charging, power allocation, and resource block assignment. Specifically, we design a network model where roadside objects use wireless power from RF signals of electric vehicles for charging and informatio…
Cellular-connected unmanned aerial vehicle (UAV) has attracted a surge of research interest in both academia and industry. To support aerial user equipment (UEs) in the existing cellular networks, one promising approach is to assign a portion of the system bandwidth exclusively to the UAV-UEs. This is especially favorable for use cases where a large number of UAV-UEs are exploited, e.g., for package delivery close to a warehouse. Although the nearly line-of-sight (LoS) channels can result in higher powers received, UAVs can in turn cause severe interference to each other in the same frequency …
A wireless network operator typically divides the radio spectrum it possesses into a number of subbands. In a cellular network those subbands are then reused in many cells. To mitigate co-channel interference, a joint spectrum and power allocation problem is often formulated to maximize a sum-rate objective. The best known algorithms for solving such problems generally require instantaneous global channel state information and a centralized optimizer. In fact those algorithms have not been implemented in practice in large networks with time-varying subbands. Deep reinforcement learning algorit…
The rapid development of the fifth generation mobile communication systems accelerates the implementation of vehicle-to-everything communications. Compared with the other types of vehicular communications, vehicle-to-vehicle (V2V) communications mainly focus on the exchange of driving safety information with neighboring vehicles, which requires ultra-reliable and low-latency communications (URLLCs). However, the frame size is significantly shortened in V2V URLLCs because of the rigorous latency requirements, and thus the overhead is no longer negligible compared with the payload information fr…
Future wireless cellular networks must support both enhanced mobile broadband (eMBB) and ultra reliable low latency communication (URLLC) to manage heterogeneous data traffic for emerging wireless services. To achieve this goal, a promising technique is to enable flexible frame structure by dynamically changing the data frame's numerology according to the channel information as well as traffic quality of service requirements. However, due to nonorthogonal subcarriers, this technique can result in an interference, known as inter numerology interference (INI), thus, degrading the network perform…
Cellular vehicle-to-everything (V2X) communication is crucial to support future diverse vehicular applications. However, for safety-critical applications, unstable vehicle-to-vehicle (V2V) links and high signalling overhead of centralized resource allocation approaches become bottlenecks. In this paper, we investigate a joint optimization problem of transmission mode selection and resource allocation for cellular V2X communications. In particular, the problem is formulated as a Markov decision process, and a deep reinforcement learning (DRL) based decentralized algorithm is proposed to maximiz…
Unmanned aerial vehicles (UAVs) can provide an effective solution for improving the coverage, capacity, and the overall performance of terrestrial wireless cellular networks. In particular, UAV-assisted cellular networks can meet the stringent performance requirements of the fifth generation new radio (5G NR) applications. In this paper, the problem of energy-efficient resource allocation in UAV-assisted cellular networks is studied under the reliability and latency constraints of 5G NR applications. The framework of ruin theory is employed to allow solar-powered UAVs to capture the dynamics o…
For Device-to-device (D2D) communication of Internet-of-Things (IoT) enabled 5G system, there is a limit to allocating resources considering a complicated interference between different links in a centralized manner. If D2D link is controlled by an enhanced node base station (eNB), and thus, remains a burden on the eNB and it causes delayed latency. This paper proposes a fully autonomous power allocation method for IoT-D2D communication underlaying cellular networks using deep learning. In the proposed scheme, an IoT-D2D transmitter decides the transmit power independently from an eNB and othe…
Huawei Technologies Canada（华为加拿大技术公司）；McGill University（麦吉尔大学）；San Diego State University（圣地亚哥州立大学）
We consider the problem of joint channel assignment and power allocation in underlaid cellular vehicular-to-everything (C-V2X) systems where multiple vehicle-to-network (V2N) uplinks share the time-frequency resources with multiple vehicle-to-vehicle (V2V) platoons that enable groups of connected and autonomous vehicles to travel closely together. Due to the nature of high user mobility in vehicular environment, traditional centralized optimization approach relying on global channel information might not be viable in C-V2X systems with large number of users. Utilizing a multi-agent reinforceme…
This work considers the problem of dynamic power allocation in the downlink of multi-cell networks, where each cell utilizes non-orthogonal multiple access (NOMA)-based resource allocation. Also, coordinated multi-point (CoMP) transmission is utilized among multiple cells to serve users experiencing severe inter-cell interference (ICI). More specifically, we consider a two-tier heterogeneous network (HetNet) consisting of a high-power macro cell underlaid with multiple low-power small cells each of which uses the same resource block. Under this {\em CoMP-NOMA framework}, CoMP transmission is a…
Physical layer security (PLS) techniques can help to protect wireless networks from eavesdropper attacks. In this paper, we consider the authentication technique that uses fingerprint embedding to defend 5G cellular networks with unmanned aerial vehicle (UAV) systems from eavesdroppers and intruders. Since the millimeter wave (mmWave) cellular networks use narrow and directional beams, PLS can take further advantage of the 3D spatial dimension for improving the authentication of UAV users. Considering a multi-user mmWave cellular network, we propose a power allocation technique that jointly ta…
In this paper, we consider a single-cell cellular network with a number of cellular users (CUs) and unmanned aerial vehicles (UAVs), in which multiple UAVs upload their collected data to the base station (BS). Two transmission modes are considered to support the multi-UAV communications, i.e., UAV-to-infrastructure (U2I) and UAV-to-UAV (U2U) communications. Specifically, the UAV with a high signal to noise ratio (SNR) for the U2I link uploads its collected data directly to the BS through U2I communication, while the UAV with a low SNR for the U2I link can transmit data to a nearby UAV through …
Cellular networks are expected to be the main communication infrastructure to support the expanding applications of Unmanned Aerial Vehicles (UAVs). As these networks are deployed to serve ground User Equipment (UES), several issues need to be addressed to enhance cellular UAVs'services.In this paper, we propose a realistic communication model on the downlink,and we show that the Quality of Service (QoS)for the users is affected by the number of interfering BSs and the impact they cause. The joint problem of sub-carrier and power allocation is therefore addressed. Given its complexity, which i…
Scheduling plays a pivotal role in multi-user wireless communications, since the quality of service of various users largely depends upon the allocated radio resources. In this paper, we propose a novel scheduling algorithm with contiguous frequency-domain resource allocation (FDRA) based on deep reinforcement learning (DRL) that jointly selects users and allocates resource blocks (RBs). The scheduling problem is modeled as a Markov decision process, and a DRL agent determines which user and how many consecutive RBs for that user should be scheduled at each RB allocation step. The state space,…
Optical wireless communication provides data transmission at high speeds which can satisfy the increasing demands for connecting a massive number of devices to the Internet. In this paper, vertical-cavity surface-emitting(VCSEL) lasers are used as transmitters due to their high modulation speed and energy efficiency. However, a high number of VCSEL lasers is required to ensure coverage where each laser source illuminates a confined area. Therefore, multiple users are classified into different sets according to their connectivity. Given this point, a transmission scheme that uses blind interfer…
Device to device communication has prevailed as an issue for small cell networks. Here we have implemented a new scheme that allows us to improve spectral capabilities of mobiles communicating with each other (peer to peer network) for downlink cellular network. Previously the spectral capabilities were handled by Reverse Iterative combinatorial auction mechanism, where the cellular uses used to bid for d2d links. We have made a comparison between Reverse Iterative combinatorial Auction (R-ICA) and New Auction method on the basis of plots on sum rate over SINR and number of d2d users.
The fifth-generation (5G) wireless cellular system, which would be deployed by 2020, is expected to deliver significantly higher capacity and better network performance compared to those of the current fourth-generation (4G) system. Specifically, it is predicted that tens of billions of wireless devices will be connected to the wireless network over the next few years, which results in an exponential explosion of mobile data traffic. Therefore, more advanced wireless architecture, as well as radical and innovative access technologies, must be proposed to meet this urgent increasing growth of m…
The fifth-generation (5G) and beyond networks are designed to efficiently utilize the spectrum resources to meet various quality of service (QoS) requirements. The unlicensed frequency bands used by WiFi are mainly deployed for indoor applications and are not always fully occupied. The cellular industry has been working to enable cellular and WiFi coexistence. In particular, 5G New Radio in unlicensed channel spectrum (NR-U) supports the uplink and downlink transmission on the maximum channel occupation time (MCOT) duration. In this paper, we consider maximizing the total throughput of both do…
Vehicle-to-everything (V2X) is a modern vehicular technology that improves conventional vehicle systems in traffic and communications. V2X communications demand energyefficient and high-reliability networking because of massive vehicular connections and high mobility wireless channels. Nonorthogonal multiple access (NOMA) is a promising solution for 5G V2X services that intend to guarantee high reliability, quality-of-service (QoS) provisioning, and massive connectivity requirements. In V2X, it is vital to inspect imperfect CSI because the high mobility of vehicles leads to more channel estima…
Internet-of-Things (IoT) refers to a massively heterogeneous network formed through smart devices connected to the Internet. In the wake of disruptive IoT with a huge amount and variety of data, Machine Learning (ML) and Deep Learning (DL) mechanisms will play a pivotal role to bring intelligence to the IoT networks. Among other aspects, ML and DL can play an essential role in addressing the challenges of resource management in large-scale IoT networks. In this article, we conduct a systematic and in-depth survey of the ML- and DL-based resource management mechanisms in cellular wireless and I…
