Bayesian posterior distributions are widely used for inference, but their dependence on a statistical model creates some challenges. In particular, there may be lots of nuisance parameters that require prior distributions and posterior computations, plus a potentially serious risk of model misspecification bias. Gibbs posterior distributions, on the other hand, offer direct, principled, probabilistic inference on quantities of interest through a loss function, not a model-based likelihood. Here we provide simple sufficient conditions for establishing Gibbs posterior concentration rates when the loss function is of a sub-exponential type. We apply these general results in a range of practically relevant examples, including mean regression, quantile regression, and sparse high-dimensional classification. We also apply these techniques in an important problem in medical statistics, namely, estimation of a personalized minimum clinically important difference.
Bayesian and other likelihood-based methods require specification of a statistical model and may not be fully satisfactory for inference on quantities, such as quantiles, that are not naturally defined as model parameters. In this paper, we construct a direct and model-free Gibbs posterior distribution for multivariate quantiles. Being model-free means that inferences drawn from the Gibbs posterior are not subject to model misspecification bias, and being direct means that no priors for or marginalization over nuisance parameters are required. We show here that the Gibbs posterior enjoys a roo…
IIt is known that a statistically significant treatment may not be clinically significant. A quantity that can be used to assess clinical significance is called the minimum clinically important difference (MCID), and inference on the MCID is an important and challenging problem. Modeling for the purpose of inference on the MCID is non-trivial, and concerns about bias from a misspecified parametric model or inefficiency from a nonparametric model motivate an alternative approach to balance robustness and efficiency. In particular, a recently proposed representation of the MCID as the minimizer …
In this paper we consider a Bayesian framework for making inferences about dynamical systems from ergodic observations. The proposed Bayesian procedure is based on the Gibbs posterior, a decision theoretic generalization of standard Bayesian inference. We place a prior over a model class consisting of a parametrized family of Gibbs measures on a mixing shift of finite type. This model class generalizes (hidden) Markov chain models by allowing for long range dependencies, including Markov chains of arbitrarily large orders. We characterize the asymptotic behavior of the Gibbs posterior distribu…
Use of continuous shrinkage priors -- with a "spike" near zero and heavy-tails towards infinity -- is an increasingly popular approach to induce sparsity in parameter estimates. When the parameters are only weakly identified by the likelihood, however, the posterior may end up with tails as heavy as the prior, jeopardizing robustness of inference. A natural solution is to "shrink the shoulders" of a shrinkage prior by lightening up its tails beyond a reasonable parameter range, yielding a regularized version of the prior. We develop a regularization approach which, unlike previous proposals, p…
In mathematical finance, Levy processes are widely used for their ability to model both continuous variation and abrupt, discontinuous jumps. These jumps are practically relevant, so reliable inference on the feature that controls jump frequencies and magnitudes, namely, the Levy density, is of critical importance. A specific obstacle to carrying out model-based (e.g., Bayesian) inference in such problems is that, for general Levy processes, the likelihood is intractable. To overcome this obstacle, here we adopt a Gibbs posterior framework that updates a prior distribution using a suitable los…
The Horseshoe is a widely used and popular continuous shrinkage prior for high-dimensional Bayesian linear regression. Recently, regularized versions of the Horseshoe prior have also been introduced in the literature. Various Gibbs sampling Markov chains have been developed in the literature to generate approximate samples from the corresponding intractable posterior densities. Establishing geometric ergodicity of these Markov chains provides crucial technical justification for the accuracy of asymptotic standard errors for Markov chain based estimates of posterior quantities. In this paper, w…
Real-world problems, often couched as machine learning applications, involve quantities of interest that have real-world meaning, independent of any statistical model. To avoid potential model misspecification bias or over-complicating the problem formulation, a direct, model-free approach is desired. The traditional Bayesian framework relies on a model for the data-generating process so, apparently, the desired direct, model-free, posterior-probabilistic inference is out of reach. Fortunately, likelihood functions are not the only means of linking data and quantities of interest. Loss functio…
Detection of an image boundary when the pixel intensities are measured with noise is an important problem in image segmentation, with numerous applications in medical imaging and engineering. From a statistical point of view, the challenge is that likelihood-based methods require modeling the pixel intensities inside and outside the image boundary, even though these are typically of no practical interest. Since misspecification of the pixel intensity models can negatively affect inference on the image boundary, it would be desirable to avoid this modeling step altogether. Towards this, we deve…
PAC-Bayesian algorithms and Gibbs posteriors are gaining popularity due to their robustness against model misspecification even when Bayesian inference is inconsistent. The PAC-Bayesian alpha-posterior is a generalization of the standard Bayes posterior which can be tempered with a parameter alpha to handle inconsistency. Data driven methods for tuning alpha have been proposed but are still few, and are often computationally heavy. Additionally, the adequacy of these methods in cases where we use variational approximations instead of exact alpha-posteriors is not clear. This narrows their usag…
Recently, the Wasserstein loss function has been proven to be effective when applied to deterministic full-waveform inversion (FWI) problems. We consider the application of this loss function in Bayesian FWI so that the uncertainty can be captured in the solution. Other loss functions that are commonly used in practice are also considered for comparison. Existence and stability of the resulting Gibbs posteriors are shown on function space under weak assumptions on the prior and model. In particular, the distribution arising from the Wasserstein loss is shown to be quite stable with respect to …
The current standard Bayesian approach to model calibration, which assigns a Gaussian process prior to the discrepancy term, often suffers from issues of unidentifiability and computational complexity and instability. When the goal is to quantify uncertainty in physical parameters for extrapolative prediction, then there is no need to perform inference on the discrepancy term. With this in mind, we introduce Gibbs posteriors as an alternative Bayesian method for model calibration, which updates the prior with a loss function connecting the data to the parameter. The target of inference is the …
In this article, we consider Markov chain Monte Carlo(MCMC) algorithms for exploring the intractable posterior density associated with Bayesian probit linear mixed models under improper priors on the regression coefficients and variance components. In particular, we construct the two-block Gibbs sampler using the data augmentation (DA) techniques. Furthermore, we prove geometric ergodicity of the Gibbs sampler, which is the foundation for building central limit theorems for MCMC based estimators and subsequent inferences. The conditions for geometric convergence are similar to those guaranteei…
Duke University（杜克大学）；George Mason University（乔治梅森大学）
In this work, we adopt a general framework based on the Gibbs posterior to update belief distributions for inverse problems governed by partial differential equations (PDEs). The Gibbs posterior formulation is a generalization of standard Bayesian inference that only relies on a loss function connecting the unknown parameters to the data. It is particularly useful when the true data generating mechanism (or noise distribution) is unknown or difficult to specify. The Gibbs posterior coincides with Bayesian updating when a true likelihood function is known and the loss function corresponds to th…
The Gibbs reference posterior distribution provides an objective full-Bayesian solution to the problem of prediction of a stationary Gaussian process with Matérn anisotropic kernel. A full-Bayesian approach is possible, because the posterior distribution is expressed as the invariant distribution of a uniformly ergodic Markovian kernel for which we give an explicit expression. In this paper, we show that it is appropriate for the Universal Kriging framework, that is when an unknown function is added to the stationary Gaussian process. We give sufficient conditions for the existence and proprie…
The Bayesian probit regression model (Albert and Chib (1993)) is popular and widely used for binary regression. While the improper flat prior for the regression coefficients is an appropriate choice in the absence of any prior information, a proper normal prior is desirable when prior information is available or in modern high dimensional settings where the number of coefficients ($p$) is greater than the sample size ($n$). For both choices of priors, the resulting posterior density is intractable and a Data Dugmentation (DA) Markov chain is used to generate approximate samples from the poster…
The area under the receiver operating characteristic curve (AUC) serves as a summary of a binary classifier's performance. Methods for estimating the AUC have been developed under a binormality assumption which restricts the distribution of the score produced by the classifier. However, this assumption introduces an infinite-dimensional nuisance parameter and can be inappropriate, especially in the context of machine learning. This motivates us to adopt a model-free Gibbs posterior distribution for the AUC. We present the asymptotic Gibbs posterior concentration rate, and a strategy for tuning…
Youden's index cutoff is a classifier mapping a patient's diagnostic test outcome and available covariate information to a diagnostic category. Typically the cutoff is estimated indirectly by first modeling the conditional distributions of test outcomes given diagnosis and then choosing the optimal cutoff for the estimated distributions. Here we present a Gibbs posterior distribution for direct inference on the cutoff. Our approach makes incorporating prior information about the cutoff much easier compared to existing methods, and does so without specifying probability models for the data, whi…
The Bayesian lasso is well-known as a Bayesian alternative for Lasso. Although the advantage of the Bayesian lasso is capable of full probabilistic uncertain quantification for parameters, the corresponding posterior distribution can be sensitive to outliers. To overcome such problem, robust Bayesian regression models have been proposed in recent years. In this paper, we consider the robust and efficient estimation for the Bayesian Huberized lasso regression in fully Bayesian perspective. A new posterior computation algorithm for the Bayesian Huberized lasso regression is proposed. The propose…
The logistic regression model is the most popular model for analyzing binary data. In the absence of any prior information, an improper flat prior is often used for the regression coefficients in Bayesian logistic regression models. The resulting intractable posterior density can be explored by running Polson et al.'s (2013) data augmentation (DA) algorithm. In this paper, we establish that the Markov chain underlying Polson et al.'s (2013) DA algorithm is geometrically ergodic. Proving this theoretical result is practically important as it ensures the existence of central limit theorems (CLTs…
In this study, we present a multi-class graphical Bayesian predictive classifier that incorporates the uncertainty in the model selection into the standard Bayesian formalism. For each class, the dependence structure underlying the observed features is represented by a set of decomposable Gaussian graphical models. Emphasis is then placed on the Bayesian model averaging which takes full account of the class-specific model uncertainty by averaging over the posterior graph model probabilities. An explicit evaluation of the model probabilities is well known to be infeasible. To address this issue…
The logistic linear mixed model (LLMM) is one of the most widely used statistical models. Generally, Markov chain Monte Carlo algorithms are used to explore the posterior densities associated with the Bayesian LLMMs. Polson, Scott and Windle's (2013) Polya-Gamma data augmentation (DA) technique can be used to construct full Gibbs (FG) samplers for the LLMMs. Here, we develop efficient block Gibbs (BG) samplers for Bayesian LLMMs using the Polya-Gamma DA method. We compare the FG and BG samplers in the context of a real data example, as the correlation between the fixed effects and the random e…
We consider the problem of learning the structure of a high dimensional precision matrix under sparsity assumptions. We propose to use a shrinkage prior, called the DL-graphical prior based on the Dirichlet-Laplace prior used for the Gaussian mean problem. A posterior sampling scheme based on Gibbs sampling is also provided along with theoretical guarantees of the method by obtaining the posterior convergence rate of the precision matrix.
Models are often defined through conditional rather than joint distributions, but it can be difficult to check whether the conditional distributions are compatible, i.e. whether there exists a joint probability distribution which generates them. When they are compatible, a Gibbs sampler can be used to sample from this joint distribution. When they are not, the Gibbs sampling algorithm may still be applied, resulting in a "pseudo-Gibbs sampler". We show its stationary probability distribution to be the optimal compromise between the conditional distributions, in the sense that it minimizes a me…
The use of Gaussian processes (GPs) is supported by efficient sampling algorithms, a rich methodological literature, and strong theoretical grounding. However, due to their prohibitive computation and storage demands, the use of exact GPs in Bayesian models is limited to problems containing at most several thousand observations. Sampling requires matrix operations that scale at $\mathcal{O}(n^3),$ where $n$ is the number of unique inputs. Storage of individual matrices scales at $\mathcal{O}(n^2),$ and can quickly overwhelm the resources of most modern computers. To overcome these bottlenecks,…
The focus in this paper is Bayesian system identification based on noisy incomplete modal data where we can impose spatially-sparse stiffness changes when updating a structural model. To this end, based on a similar hierarchical sparse Bayesian learning model from our previous work, we propose two Gibbs sampling algorithms. The algorithms differ in their strategies to deal with the posterior uncertainty of the equation-error precision parameter, but both sample from the conditional posterior probability density functions (PDFs) for the structural stiffness parameters and system modal parameter…
We consider posterior sampling in the very common Bayesian hierarchical model in which observed data depends on high-dimensional latent variables that, in turn, depend on relatively few hyperparameters. When the full conditional over the latent variables has a known form, the marginal posterior distribution over hyperparameters is accessible and can be sampled using a Markov chain Monte Carlo (MCMC) method on a low-dimensional parameter space. This may improve computational efficiency over standard Gibbs sampling since computation is not over the high-dimensional space of latent variables and …
Markov chain Monte Carlo (MCMC) samplers are numerical methods for drawing samples from a given target probability distribution. We discuss one particular MCMC sampler, the MALA-within-Gibbs sampler, from the theoretical and practical perspectives. We first show that the acceptance ratio and step size of this sampler are independent of the overall problem dimension when (i) the target distribution has sparse conditional structure, and (ii) this structure is reflected in the partial updating strategy of MALA-within-Gibbs. If, in addition, the target density is block-wise log-concave, then the s…
In this work, we propose a model for estimating volatility from financial time series, extending the non-Gaussian family of space-state models with exact marginal likelihood proposed by Gamerman, Santos and Franco (2013). On the literature there are models focused on estimating financial assets risk, however, most of them rely on MCMC methods based on Metropolis algorithms, since full conditional posterior distributions are not known. We present an alternative model capable of estimating the volatility, in an automatic way, since all full conditional posterior distributions are known, and it i…
In this paper, we consider the well known problem of estimating a density function under qualitative assumptions. More precisely, we estimate monotone non increasing densities in a Bayesian setting and derive concentration rate for the posterior distribution for a Dirichlet process and finite mixture prior. We prove that the posterior distribution based on both priors concentrates at the rate $(n/\log(n))^{-1/3}$, which is the minimax rate of estimation up to a \log(n)$ factor. We also study the behaviour of the posterior for the point-wise loss at any fixed point of the support the density an…
University of Tübingen（蒂宾根大学）；Max Planck Institute for Intelligent Systems（马克斯·普朗克智能系统研究所）
Full Bayesian posteriors are rarely analytically tractable, which is why real-world Bayesian inference heavily relies on approximate techniques. Approximations generally differ from the true posterior and require diagnostic tools to assess whether the inference can still be trusted. We investigate a new approach to diagnosing approximate inference: the approximation mismatch is attributed to a change in the inductive bias by treating the approximations as exact and reverse-engineering the corresponding prior. We show that the problem is more complicated than it appears to be at first glance, b…
The emergence of big data has led to a growing interest in so-called convergence complexity analysis, which is the study of how the convergence rate of a Monte Carlo Markov chain (for an intractable Bayesian posterior distribution) scales as the underlying data set grows in size. Convergence complexity analysis of practical Monte Carlo Markov chains on continuous state spaces is quite challenging, and there have been very few successful analyses of such chains. One fruitful analysis was recently presented by Qin and Hobert (2021b), who studied a Gibbs sampler for a simple Bayesian random effec…
It is well known that the Lasso can be interpreted as a Bayesian posterior mode estimate with a Laplacian prior. Obtaining samples from the full posterior distribution, the Bayesian Lasso, confers major advantages in performance as compared to having only the Lasso point estimate. Traditionally, the Bayesian Lasso is implemented via Gibbs sampling methods which suffer from lack of scalability, unknown convergence rates, and generation of samples that are necessarily correlated. We provide a measure transport approach to generate i.i.d samples from the posterior by constructing a transport map …
Gibbs sampling is a widely popular Markov chain Monte Carlo algorithm that can be used to analyze intractable posterior distributions associated with Bayesian hierarchical models. There are two standard versions of the Gibbs sampler: The systematic scan (SS) version, where all variables are updated at each iteration, and the random scan (RS) version, where a single, randomly selected variable is updated at each iteration. The literature comparing the theoretical properties of SS and RS Gibbs samplers is reviewed, and an alternative hybrid scan Gibbs sampler is introduced, which is particularly…
