Graph convolutional networks (GCNs) can effectively capture the features of related nodes and improve the performance of the model. More attention is paid to employing GCN in Skeleton-Based action recognition. But existing methods based on GCNs have two problems. First, the consistency of temporal and spatial features is ignored for extracting features node by node and frame by frame. To obtain spatiotemporal features simultaneously, we design a generic representation of skeleton sequences for action recognition and propose a novel model called Temporal Graph Networks (TGN). Secondly, the adjacency matrix of the graph describing the relation of joints is mostly dependent on the physical connection between joints. To appropriately describe the relations between joints in the skeleton graph, we propose a multi-scale graph strategy, adopting a full-scale graph, part-scale graph, and core-scale graph to capture the local features of each joint and the contour features of important joints. Experiments were carried out on two large datasets and results show that TGN with our graph strategy outperforms state-of-the-art methods.
Georgia Institute of Technology（佐治亚理工学院）；Intel（英特尔）
Skeleton-based human action recognition technologies are increasingly used in video based applications, such as home robotics, healthcare on aging population, and surveillance. However, such models are vulnerable to adversarial attacks, raising serious concerns for their use in safety-critical applications. To develop an effective defense against attacks, it is essential to understand how such attacks mislead the pose detection models into making incorrect predictions. We present SkeletonVis, the first interactive system that visualizes how the attacks work on the models to enhance human under…
Cooperative Medianet Innovation Center, Shanghai Jiao Tong University（上海交通大学合作媒体网络创新中心）；Mitsubishi Electric Research Laboratories（三菱电机研究实验室）；Huawei Noah’s Ark Lab（华为诺亚方舟实验室）
Action recognition with skeleton data has recently attracted much attention in computer vision. Previous studies are mostly based on fixed skeleton graphs, only capturing local physical dependencies among joints, which may miss implicit joint correlations. To capture richer dependencies, we introduce an encoder-decoder structure, called A-link inference module, to capture action-specific latent dependencies, i.e. actional links, directly from actions. We also extend the existing skeleton graphs to represent higher-order dependencies, i.e. structural links. Combing the two types of links into a…
University of North Carolina at Charlotte（北卡罗来纳大学夏洛特分校）；College of Computing and Informatics（计算与信息学院）
Recently, there has been a remarkable increase in the interest towards skeleton-based action recognition within the research community, owing to its various advantageous features, including computational efficiency, representative features, and illumination invariance. Despite this, researchers continue to explore and investigate the most optimal way to represent human actions through skeleton representation and the extracted features. As a result, the growth and availability of human action recognition datasets have risen substantially. In addition, deep learning-based algorithms have gained …
Wangxuan Institute of Computer Technology, Peking University（北京大学王选计算机技术研究所）
In this paper, we address self-supervised representation learning from human skeletons for action recognition. Previous methods, which usually learn feature presentations from a single reconstruction task, may come across the overfitting problem, and the features are not generalizable for action recognition. Instead, we propose to integrate multiple tasks to learn more general representations in a self-supervised manner. To realize this goal, we integrate motion prediction, jigsaw puzzle recognition, and contrastive learning to learn skeleton features from different aspects. Skeleton dynamics …
Sign language is commonly used by deaf or mute people to communicate but requires extensive effort to master. It is usually performed with the fast yet delicate movement of hand gestures, body posture, and even facial expressions. Current Sign Language Recognition (SLR) methods usually extract features via deep neural networks and suffer overfitting due to limited and noisy data. Recently, skeleton-based action recognition has attracted increasing attention due to its subject-invariant and background-invariant nature, whereas skeleton-based SLR is still under exploration due to the lack of han…
One-shot action recognition allows the recognition of human-performed actions with only a single training example. This can influence human-robot-interaction positively by enabling the robot to react to previously unseen behaviour. We formulate the one-shot action recognition problem as a deep metric learning problem and propose a novel image-based skeleton representation that performs well in a metric learning setting. Therefore, we train a model that projects the image representations into an embedding space. In embedding space the similar actions have a low euclidean distance while dissimil…
Capturing the dependencies between joints is critical in skeleton-based action recognition task. Transformer shows great potential to model the correlation of important joints. However, the existing Transformer-based methods cannot capture the correlation of different joints between frames, which the correlation is very useful since different body parts (such as the arms and legs in "long jump") between adjacent frames move together. Focus on this problem, A novel spatio-temporal tuples Transformer (STTFormer) method is proposed. The skeleton sequence is divided into several parts, and several…
Frequency-Semantic Enhanced Variational Autoencoder for Zero-Shot Skeleton-based Action Recognition
University of North Carolina at Charlotte（夏洛特北卡罗来纳大学）；Northern Illinois University（北伊利诺伊大学）；Center for Research in Computer Vision, University of Central Florida（中佛罗里达大学计算机视觉研究中心）
Army Engineering University（陆军工程大学）；The Army Artillery and Defense Academy of PLA（中国人民解放军陆军炮兵防空兵学院）
Human skeleton data has received increasing attention in action recognition due to its background robustness and high efficiency. In skeleton-based action recognition, graph convolutional network (GCN) has become the mainstream method. This paper analyzes the fundamental factor for GCN-based models -- the adjacency matrix. We notice that most GCN-based methods conduct their adjacency matrix based on the human natural skeleton structure. Based on our former work and analysis, we propose that the human natural skeleton structure adjacency matrix is not proper for skeleton-based action recognitio…
Deep learning models achieve impressive performance for skeleton-based human action recognition. However, the robustness of these models to adversarial attacks remains largely unexplored due to their complex spatio-temporal nature that must represent sparse and discrete skeleton joints. This work presents the first adversarial attack on skeleton-based action recognition with graph convolutional networks. The proposed targeted attack, termed Constrained Iterative Attack for Skeleton Actions (CIASA), perturbs joint locations in an action sequence such that the resulting adversarial sequence pres…
State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing（测绘遥感信息工程国家重点实验室）；Wuhan University（武汉大学）；Information Systems Technology and Design Pillar（信息系统技术与设计学院）；Singapore University of Technology and Design（新加坡科技与设计大学）；School of Geodesy and Geomatics（测绘学院）；School of Mathematics and Statistics（数学与统计学院）；Wuhan University Shenzhen Research Institute（武汉大学深圳研究院）
The Chinese University of HongKong（香港中文大学）；Shanghai AI Laboratory（上海人工智能实验室）
We present PYSKL: an open-source toolbox for skeleton-based action recognition based on PyTorch. The toolbox supports a wide variety of skeleton action recognition algorithms, including approaches based on GCN and CNN. In contrast to existing open-source skeleton action recognition projects that include only one or two algorithms, PYSKL implements six different algorithms under a unified framework with both the latest and original good practices to ease the comparison of efficacy and efficiency. We also provide an original GCN-based skeleton action recognition model named ST-GCN++, which achie…
Institute of Information Engineering, Chinese Academy of Sciences（中国科学院信息工程研究所）
Graph convolutional networks (GCNs) have emerged as dominant methods for skeleton-based action recognition. However, they still suffer from two problems, namely, neighborhood constraints and entangled spatiotemporal feature representations. Most studies have focused on improving the design of graph topology to solve the first problem but they have yet to fully explore the latter. In this work, we design a disentangled spatiotemporal transformer (DSTT) block to overcome the above limitations of GCNs in three steps: (i) feature disentanglement for spatiotemporal decomposition;(ii) global spatiot…
Neurosymbolic Framework for Concept-Driven Logical Reasoning in Skeleton-Based Human Action Recognition
Department of ECSE, Faculty of Engineering, Monash University, Australia（莫纳什大学工程学院电子与计算机工程系，澳大利亚）；AIM for Health Lab, Faculty of Information Technology, Monash University, Australia（莫纳什大学信息科技学院健康人工智能实验室，澳大利亚）；Department of DSAI, Faculty of Information Technology, Monash University, Australia（莫纳什大学信息科技学院数据科学与人工智能系，澳大利亚）
Toward Universal Skeleton-Based Action Recognition across Heterogeneous Skeletons and Open Vocabularies
School of Cyber Science and Engineering, Southeast University, Nanjing, China（东南大学计算机科学与工程学院，南京，中国）；School of Computer Science and Engineering, Southeast University, Nanjing, China（东南大学计算机科学与工程学院，南京，中国）
Graph convolutional networks (GCNs) based methods have achieved advanced performance on skeleton-based action recognition task. However, the skeleton graph cannot fully represent the motion information contained in skeleton data. In addition, the topology of the skeleton graph in the GCN-based methods is manually set according to natural connections, and it is fixed for all samples, which cannot well adapt to different situations. In this work, we propose a novel dynamic hypergraph convolutional networks (DHGCN) for skeleton-based action recognition. DHGCN uses hypergraph to represent the skel…
The University of Western Australia（西澳大利亚大学）；Murdoch University（莫道克大学）
This paper presents a new method for 3D action recognition with skeleton sequences (i.e., 3D trajectories of human skeleton joints). The proposed method first transforms each skeleton sequence into three clips each consisting of several frames for spatial temporal feature learning using deep neural networks. Each clip is generated from one channel of the cylindrical coordinates of the skeleton sequence. Each frame of the generated clips represents the temporal information of the entire skeleton sequence, and incorporates one particular spatial relationship between the joints. The entire clips …
This study investigates unsupervised anomaly action recognition, which identifies video-level abnormal-human-behavior events in an unsupervised manner without abnormal samples, and simultaneously addresses three limitations in the conventional skeleton-based approaches: target domain-dependent DNN training, robustness against skeleton errors, and a lack of normal samples. We present a unified, user prompt-guided zero-shot learning framework using a target domain-independent skeleton feature extractor, which is pretrained on a large-scale action recognition dataset. Particularly, during the tra…
Skeleton-based action recognition attracts practitioners and researchers due to the lightweight, compact nature of datasets. Compared with RGB-video-based action recognition, skeleton-based action recognition is a safer way to protect the privacy of subjects while having competitive recognition performance. However, due to improvements in skeleton recognition algorithms as well as motion and depth sensors, more details of motion characteristics can be preserved in the skeleton dataset, leading to potential privacy leakage. We first train classifiers to categorize private information from skele…
Current state-of-the-art approaches to skeleton-based action recognition are mostly based on recurrent neural networks (RNN). In this paper, we propose a novel convolutional neural networks (CNN) based framework for both action classification and detection. Raw skeleton coordinates as well as skeleton motion are fed directly into CNN for label prediction. A novel skeleton transformer module is designed to rearrange and select important skeleton joints automatically. With a simple 7-layer network, we obtain 89.3% accuracy on validation set of the NTU RGB+D dataset. For action detection in untri…
Curtin University（科廷大学）；Gwangju Institution of Science and Technology（光州科学技术院）
In skeleton-based action recognition, graph convolutional networks (GCNs), which model human body skeletons using graphical components such as nodes and connections, have achieved remarkable performance recently. However, current state-of-the-art methods for skeleton-based action recognition usually work on the assumption that the completely observed skeletons will be provided. This may be problematic to apply this assumption in real scenarios since there is always a possibility that captured skeletons are incomplete or noisy. In this work, we propose a skeleton-based action recognition method…
Dynamics of human body skeletons convey significant information for human action recognition. Conventional approaches for modeling skeletons usually rely on hand-crafted parts or traversal rules, thus resulting in limited expressive power and difficulties of generalization. In this work, we propose a novel model of dynamic skeletons called Spatial-Temporal Graph Convolutional Networks (ST-GCN), which moves beyond the limitations of previous methods by automatically learning both the spatial and temporal patterns from data. This formulation not only leads to greater expressive power but also st…
Center for Research on Intelligent Perception and Computing, CASIA（中国科学院自动化研究所智能感知与计算研究中心）；National Laboratory of Pattern Recognition, CASIA（中国科学院自动化研究所模式识别国家重点实验室）；CAS Center for Excellence in Brain Science and Intelligence Technology（中国科学院脑科学与智能技术卓越创新中心）；University of Chinese Academy of Sciences（中国科学院大学）
With the fast development of effective and low-cost human skeleton capture systems, skeleton-based action recognition has attracted much attention recently. Most existing methods use Convolutional Neural Network (CNN) and Recurrent Neural Network (RNN) to extract spatio-temporal information embedded in the skeleton sequences for action recognition. However, these approaches are limited in the ability of relational modeling in a single skeleton, due to the loss of important structural information when converting the raw skeleton data to adapt to the input format of CNN or RNN. In this paper, we…
SmartMore Corporation（思谋科技）；The Chinese University of Hong Kong (Shenzhen)（香港中文大学（深圳））；South China University of Technology（华南理工大学）
Skeleton-based action recognition has attracted research attentions in recent years. One common drawback in currently popular skeleton-based human action recognition methods is that the sparse skeleton information alone is not sufficient to fully characterize human motion. This limitation makes several existing methods incapable of correctly classifying action categories which exhibit only subtle motion differences. In this paper, we propose a novel framework for employing human pose skeleton and joint-centered light-weight information jointly in a two-stream graph convolutional network, namel…
Tianjin University（天津大学）；Key Research Center for Surface Monitoring and Analysis of Cultural Relics (SMARC), State Administration of Cultural Heritage, China（中国国家文物局文物表面监测与分析重点研究中心）；University of South Carolina（南卡罗来纳大学）
Skeleton-based human action recognition has been drawing more interest recently due to its low sensitivity to appearance changes and the accessibility of more skeleton data. However, even the 3D skeletons captured in practice are still sensitive to the viewpoint and direction gave the occlusion of different human-body joints and the errors in human joint localization. Such view variance of skeleton data may significantly affect the performance of action recognition. To address this issue, we propose in this paper a new view-invariant representation learning approach, without any manual action …
This paper investigates body bones from skeleton data for skeleton based action recognition. Body joints, as the direct result of mature pose estimation technologies, are always the key concerns of traditional action recognition methods. However, instead of joints, we humans naturally identify how the human body moves according to shapes, lengths and places of bones, which are more obvious and stable for observation. Hence given graphs generated from skeleton data, we propose to develop convolutions over graph edges that correspond to bones in human skeleton. We describe an edge by integrating…
Due to the fast processing-speed and robustness it can achieve, skeleton-based action recognition has recently received the attention of the computer vision community. The recent Convolutional Neural Network (CNN)-based methods have shown commendable performance in learning spatio-temporal representations for skeleton sequence, which use skeleton image as input to a CNN. Since the CNN-based methods mainly encoding the temporal and skeleton joints simply as rows and columns, respectively, the latent correlation related to all joints may be lost caused by the 2D convolution. To solve this proble…
Nara Institute of Science Technology（奈良先端科学技术大学院大学）；RIKEN AIP（理化学研究所先进工业科学与技术研究院）；Kyoto University（京都大学）
Although skeleton-based action recognition has achieved great success in recent years, most of the existing methods may suffer from a large model size and slow execution speed. To alleviate this issue, we analyze skeleton sequence properties to propose a Double-feature Double-motion Network (DD-Net) for skeleton-based action recognition. By using a lightweight network structure (i.e., 0.15 million parameters), DD-Net can reach a super fast speed, as 3,500 FPS on one GPU, or, 2,000 FPS on one CPU. By employing robust features, DD-Net achieves the state-of-the-art performance on our experimental…
Skeleton-based action recognition relies on the extraction of spatial-temporal topological information. Hypergraphs can establish prior unnatural dependencies for the skeleton. However, the existing methods only focus on the construction of spatial topology and ignore the time-point dependence. This paper proposes a dynamic spatial-temporal hypergraph convolutional network (DST-HCN) to capture spatial-temporal information for skeleton-based action recognition. DST-HCN introduces a time-point hypergraph (TPH) to learn relationships at time points. With multiple spatial static hypergraphs and dy…
The Chinese University of HongKong（香港中文大学）；Shanghai AI Laboratory（上海人工智能实验室）；The University of Texas at Austin（德克萨斯大学奥斯汀分校）；SenseTime Research（商汤科技研究院）；Nanyang Technological University（南洋理工大学）
Human skeleton, as a compact representation of human action, has received increasing attention in recent years. Many skeleton-based action recognition methods adopt graph convolutional networks (GCN) to extract features on top of human skeletons. Despite the positive results shown in previous works, GCN-based methods are subject to limitations in robustness, interoperability, and scalability. In this work, we propose PoseC3D, a new approach to skeleton-based action recognition, which relies on a 3D heatmap stack instead of a graph sequence as the base representation of human skeletons. Compare…
The Chinese University of Hong Kong（香港中文大学）；Shanghai AI Lab（上海人工智能实验室）
Graph convolution networks (GCN) have been widely used in skeleton-based action recognition. We note that existing GCN-based approaches primarily rely on prescribed graphical structures (ie., a manually defined topology of skeleton joints), which limits their flexibility to capture complicated correlations between joints. To move beyond this limitation, we propose a new framework for skeleton-based action recognition, namely Dynamic Group Spatio-Temporal GCN (DG-STGCN). It consists of two modules, DG-GCN and DG-TCN, respectively, for spatial and temporal modeling. In particular, DG-GCN uses le…
There exist a wide range of intra class variations of the same actions and inter class similarity among the actions, at the same time, which makes the action recognition in videos very challenging. In this paper, we present a novel skeleton-based part-wise Spatiotemporal CNN RIAC Network-based 3D human action recognition framework to visualise the action dynamics in part wise manner and utilise each part for action recognition by applying weighted late fusion mechanism. Part wise skeleton based motion dynamics helps to highlight local features of the skeleton which is performed by partitioning…
Advanced Multimedia Research Lab, University of Wollongong（卧龙岗大学高级多媒体研究实验室）
Deep learning techniques are being used in skeleton based action recognition tasks and outstanding performance has been reported. Compared with RNN based methods which tend to overemphasize temporal information, CNN-based approaches can jointly capture spatio-temporal information from texture color images encoded from skeleton sequences. There are several skeleton-based features that have proven effective in RNN-based and handcrafted-feature-based methods. However, it remains unknown whether they are suitable for CNN-based approaches. This paper proposes to encode five spatial skeleton feature…
Skeleton-based action recognition receives increasing attention because the skeleton representations reduce the amount of training data by eliminating visual information irrelevant to actions. To further improve the sample efficiency, meta-learning-based one-shot learning solutions were developed for skeleton-based action recognition. These methods find the nearest neighbor according to the similarity between instance-level global average embedding. However, such measurement holds unstable representativity due to inadequate generalized learning on local invariant and noisy features, while intu…
Human action recognition in 3D skeleton sequences has attracted a lot of research attention. Recently, Long Short-Term Memory (LSTM) networks have shown promising performance in this task due to their strengths in modeling the dependencies and dynamics in sequential data. As not all skeletal joints are informative for action recognition, and the irrelevant joints often bring noise which can degrade the performance, we need to pay more attention to the informative ones. However, the original LSTM network does not have explicit attention ability. In this paper, we propose a new class of LSTM net…
This paper presents an image classification based approach for skeleton-based video action recognition problem. Firstly, A dataset independent translation-scale invariant image mapping method is proposed, which transformes the skeleton videos to colour images, named skeleton-images. Secondly, A multi-scale deep convolutional neural network (CNN) architecture is proposed which could be built and fine-tuned on the powerful pre-trained CNNs, e.g., AlexNet, VGGNet, ResNet etal.. Even though the skeleton-images are very different from natural images, the fine-tune strategy still works well. At last…
University of Chinese Academy of Sciences（中国科学院大学）；Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）
Current methods for skeleton-based human action recognition usually work with completely observed skeletons. However, in real scenarios, it is prone to capture incomplete and noisy skeletons, which will deteriorate the performance of traditional models. To enhance the robustness of action recognition models to incomplete skeletons, we propose a multi-stream graph convolutional network (GCN) for exploring sufficient discriminative features distributed over all skeleton joints. Here, each stream of the network is only responsible for learning features from currently unactivated joints, which are…
Alibaba DAMO Academy（阿里巴巴达摩院）；University of Wollongong（伍伦贡大学）
This paper presents a study of automatic design of neural network architectures for skeleton-based action recognition. Specifically, we encode a skeleton-based action instance into a tensor and carefully define a set of operations to build two types of network cells: normal cells and reduction cells. The recently developed DARTS (Differentiable Architecture Search) is adopted to search for an effective network architecture that is built upon the two types of cells. All operations are 2D based in order to reduce the overall computation and search space. Experiments on the challenging NTU RGB+D …
Recently skeleton-based action recognition has made signif-icant progresses in the computer vision community. Most state-of-the-art algorithms are based on Graph Convolutional Networks (GCN), andtarget at improving the network structure of the backbone GCN lay-ers. In this paper, we propose a novel mechanism to learn more robustdiscriminative features in space and time. More specifically, we add aDiscriminative Feature Learning (DFL) branch to the last layers of thenetwork to extract discriminative spatial and temporal features to helpregularize the learning. We also formally advocate the use …
Shanghai Jiao Tong University（上海交通大学）；Microsoft Research Asia（微软亚洲研究院）
Skeleton data carries valuable motion information and is widely explored in human action recognition. However, not only the motion information but also the interaction with the environment provides discriminative cues to recognize the action of persons. In this paper, we propose a joint learning framework for mutually assisted "interacted object localization" and "human action recognition" based on skeleton data. The two tasks are serialized together and collaborate to promote each other, where preliminary action type derived from skeleton alone helps improve interacted object localization, wh…
Xian Jiaotong University（西安交通大学）；Microsoft Research Asia（微软亚洲研究院）；Chinese Academy of Sciences（中国科学院）
Skeleton-based human action recognition has recently attracted increasing attention thanks to the accessibility and the popularity of 3D skeleton data. One of the key challenges in skeleton-based action recognition lies in the large view variations when capturing data. In order to alleviate the effects of view variations, this paper introduces a novel view adaptation scheme, which automatically determines the virtual observation viewpoints in a learning based data driven manner. We design two view adaptive neural networks, i.e., VA-RNN based on RNN, and VA-CNN based on CNN. For each network, a…
State Key Laboratory of General Artificial Intelligence, Peking University, Shenzhen Graduate School（国家一般人工智能实验室，北京大学深圳研究生院）；Department of Information Engineering and Computer Science (DISI), University of Trento（信息工程与计算机科学系（DISI），特伦托大学）；University at Buffalo, The State University of New York（布法罗大学，纽约州立大学）；Tsinghua Shenzhen International Graduate School, Tsinghua University（清华大学深圳国际研究生院，清华大学）
Skeleton-based human action recognition has recently drawn increasing attentions with the availability of large-scale skeleton datasets. The most crucial factors for this task lie in two aspects: the intra-frame representation for joint co-occurrences and the inter-frame representation for skeletons' temporal evolutions. In this paper we propose an end-to-end convolutional co-occurrence feature learning framework. The co-occurrence features are learned with a hierarchical methodology, in which different levels of contextual information are aggregated gradually. Firstly point-level information …
Skeleton-based action recognition aims to project skeleton sequences to action categories, where skeleton sequences are derived from multiple forms of pre-detected points. Compared with earlier methods that focus on exploring single-form skeletons via Graph Convolutional Networks (GCNs), existing methods tend to improve GCNs by leveraging multi-form skeletons due to their complementary cues. However, these methods (either adapting structure of GCNs or model ensemble) require the co-existence of all forms of skeletons during both training and inference stages, while a typical situation in real …
