Microwave Package Design for Superconducting Quantum Processors
Sihao Huang, Benjamin Lienhard, Greg Calusine, Antti Vepsäläinen, Jochen Braumüller, David K. Kim, Alexander J. Melville, Bethany M. Niedzielski, Jonilyn L. Yod… 展开作者
Sihao Huang, Benjamin Lienhard, Greg Calusine, Antti Vepsäläinen, Jochen Braumüller, David K. Kim, Alexander J. Melville, Bethany M. Niedzielski, Jonilyn L. Yoder, Bharath Kannan, Terry P. Orlando, Simon Gustavsson, William D. Oliver
Solid-state qubits with transition frequencies in the microwave regime, such as superconducting qubits, are at the forefront of quantum information processing. However, high-fidelity, simultaneous control of superconducting qubits at even a moderate scale remains a challenge, partly due to the complexities of packaging these devices. Here, we present an approach to microwave package design focusing on material choices, signal line engineering, and spurious mode suppression. We describe design guidelines validated using simulations and measurements used to develop a 24-port microwave package. Analyzing the qubit environment reveals no spurious modes up to 11GHz. The material and geometric design choices enable the package to support qubits with lifetimes exceeding 350 μs. The microwave package design guidelines presented here address many issues relevant for near-term quantum processors.
Cryogenic Multiplexing Control Chip for Superconducting Quantum Processor
Tsinghua University（清华大学）；Beijing National Research Center for Information Science and Technology（北京信息科学与技术国家研究中心）；Beijing Innovation Center for Future Chips, Tsinghua University（清华大学未来芯片创新中心）
We demonstrate a pogo pin package for a superconducting quantum processor specifically designed with a nontrivial layout topology (e.g., a center qubit that cannot be accessed from the sides of the chip). Two experiments on two nominally identical superconducting quantum processors in pogo packages, which use commercially available parts and require modest machining tolerances, are performed at low temperature (10 mK) in a dilution refrigerator and both found to behave comparably to processors in standard planar packages with wirebonds where control and readout signals come in from the edges. …
We propose a quantum processor for the scalable quantum computation on microwave photons in distant one-dimensional superconducting resonators. It is composed of a common resonator R acting as a quantum bus and some distant resonators $r_j$ coupled to the bus in different positions assisted by superconducting quantum interferometer devices (SQUID), different from previous processors. R is coupled to one transmon qutrit, and the coupling strengths between $r_j$ and R can be fully tuned by the external flux through the SQUID. To show the processor can be used to achieve universal quantum computa…
Optimising Cryogenic Wiring for Microwave-frequency Millikelvin Quantum Processors
Sydney Quantum Academy（悉尼量子学院）；Centre for Quantum Software & Information, School of Mathematical & Physical Sciences, University of Technology Sydney（悉尼科技大学数学与物理科学学院量子软件与信息研究中心）
We design a quantum repeater architecture, necessary for long distance quantum networks, using the recently proposed microwave cat state qubits, formed and manipulated via interaction between a superconducting nonlinear element and a microwave cavity. These qubits are especially attractive for repeaters because in addition to serving as excellent computational units with deterministic gate operations, they also have coherence times long enough to deal with the unavoidable propagation delays. Since microwave photons are too low in energy to be able to carry quantum information over long distanc…
Extracting Electromagnetic Bare Mode Couplings in Large Superconducting Quantum Processors
Google Quantum AI（谷歌量子人工智能）；Purdue Quantum Science and Engineering Institute, Purdue University（普渡大学量子科学与工程研究所）；Department of Physics, University of California, Santa Barbara（加州大学圣塔芭芭拉分校物理系）
PyGSTi is a Python software package for assessing and characterizing the performance of quantum computing processors. It can be used as a standalone application, or as a library, to perform a wide variety of quantum characterization, verification, and validation (QCVV) protocols on as-built quantum processors. We outline pyGSTi's structure, and what it can do, using multiple examples. We cover its main characterization protocols with end-to-end implementations. These include gate set tomography, randomized benchmarking on one or many qubits, and several specialized techniques. We also discuss …
Advancements in computing based on qubit networks, and in particular the flux-qubit processor architecture developed by D-Wave System's Inc., have enabled the physical simulation of quantum-dot cellular automata (QCA) networks beyond the limit of classical methods. However, the embedding of QCA networks onto the available processor architecture is a key challenge in preparing such simulations. In this work, two approaches to embedding QCA circuits are characterized: a dense placement algorithm that uses a routing method based on negotiated congestion; and a heuristic method implemented in D-Wa…
We propose a new design for a quantum information processor where qubits are encoded into Hyperfine states of ions held in a linear array of individually tailored microtraps and sitting in a spatially varying magnetic field. The magnetic field gradient introduces spatially dependent qubit transition frequencies and a type of spin-spin interaction between qubits. Single and multi-qubit manipulation is achieved via resonant microwave pulses as in liquid-NMR quantum computation while the qubit readout and reset is achieved through trapped-ion fluorescence shelving techniques. By adjusting the mic…
Native CCZ Gate with Fluxonium Qubits and a Microwave-Driven Coupler
National University of Science and Technology “MISIS”（国立科技大学 MISIS）；International Center for Quantum Optics and Quantum Technologies, Assn（国际量子光学与量子技术协会）；Moscow Center for Advanced Studies（莫斯科高等研究中心）
Quantum transduction refers to the coherent conversion between microwave and optical states, which can be achieved by quantum teleportation if given high fidelity microwave-optical entanglement, namely entanglement-based quantum transduction. Reliable microwave-optical entanglement can be generated using various platforms. In this paper, we base the discussion on piezo-optomechanical system and make the teleportation induced conversion scheme more concrete in the framework of quantum channel theory. By comparing the quantum capacity between the entanglement-based conversion channel and the tra…
We introduce a method for high-fidelity quantum state transduction between a superconducting microwave qubit and the ground state spin system of a solid-state artificial atom, mediated via an acoustic bus connected by piezoelectric transducers. Applied to present-day experimental parameters for superconducting circuit qubits and diamond silicon vacancy centers in an optimized phononic cavity, we estimate quantum state transduction with fidelity exceeding 99\% at a MHz-scale bandwidth. By combining the complementary strengths of superconducting circuit quantum computing and artificial atoms, th…
Practical quantum computers require the construction of a large network of highly coherent qubits, interconnected in a design robust against errors. Donor spins in silicon provide state-of-the-art coherence and quantum gate fidelities, in a physical platform adapted from industrial semiconductor processing. Here we present a scalable design for a silicon quantum processor that does not require precise donor placement and allows hundreds of nanometers inter-qubit distances, therefore facilitating fabrication using current technology. All qubit operations are performed via electrical means on th…
A possibility of performing the C-NOT gate operation at the ground and the first excited states of two harmonic oscillators interacting via a two-level system subject to complete control is demonstrated. The system resembles Turing machine, where the result of interaction between oscillators and the two level system is restricted to a certain fixed unitary transformation matrix, while all the control required for the implementation of the gate is provided via manipulations with the two-level system, which remains the only fully-controllable part of the entire system. Each gate operation requir…
Scalable quantum information processing requires that modular gate operations can be executed in parallel. The presence of crosstalk decreases the individual addressability, causing erroneous results during simultaneous operations. For superconducting qubits which operate in the microwave regime, electromagnetic isolation is often limited due to design constraints, leading to signal crosstalk that can deteriorate the quality of simultaneous gate operations. Here, we propose and demonstrate a method based on AC Stark effect for calibrating the microwave signal crosstalk. The method is suitable …
Pump-Free Microwave-Optical Bell Pair Generation for Teleportation-Based Quantum Transduction
University of Chicago（芝加哥大学）；Pritzker School of Molecular Engineering, University of Chicago（普里茨克分子工程学院）；Q-NEXT, Argonne National Laboratory（Q-NEXT，阿贡国家实验室）；Materials Science Division, Argonne National Laboratory（材料科学部，阿贡国家实验室）
Frequency conversion between microwave and optical photons is a key enabling technology to create links between superconducting quantum processors and to realize distributed quantum networks. We propose a microwave-optical transduction platform based on long-coherence-time superconducting radio-frequency (SRF) cavities coupled to electro-optic optical cavities to mitigate the loss mechanisms that limit the attainment of high conversion efficiency. In the design, we optimize the microwave-optical field overlap and optical coupling losses, while achieving long microwave and optical photon lifeti…
As the field of quantum computing progresses to larger-scale devices, multiplexing will be crucial to scale quantum processors. While multiplexed readout is common practice for superconducting devices, relatively little work has been reported about the combination of flux and microwave control lines. Here, we present a method to integrate a microwave line and a flux line into a single "XYZ line". This combined control line allows us to perform fast single-qubit gates as well as to deliver flux signals to the qubits. The measured relaxation times of the qubits are comparable to state-of-art dev…
Based on a microwave-photon quantum processor with two superconducting resonators coupled to one transmon qutrit, we construct the controlled-phase (c-phase) gate on microwave-photon-resonator qudits, by combination of the photon-number-dependent frequency-shift effect on the transmon qutrit by the first resonator and the resonant operation between the qutrit and the second resonator. This distinct feature provides us a useful way to achieve the c-phase gate on the two resonator qudits with a higher fidelity and a shorter operation time, compared with the previous proposals. The fidelity of ou…
The scaleup of quantum computers operating in the microwave domain requires advanced control electronics, and the use of integrated components that operate at the temperature of the quantum devices is potentially beneficial. However, such an approach requires ultra-low power dissipation and high signal quality in order to ensure quantum-coherent operations. Here, we report an on-chip device that is based on a Josephson junction coupled to a spiral resonator and is capable of coherent continuous-wave microwave emission. We show that characteristics of the device accurately follow a theory based…
Improving gate performance is vital for scalable quantum computing. The universal quantum computing also requires the gate fidelity to reach a high level. For superconducting quantum processor, which operates in the microwave band, the single-qubit gates are usually realized with microwave driving. The crosstalk between microwave pulses is a non-negligible error source. In this article, we propose an error mitigation scheme to address this crosstalk issue for single-qubit gates. There are three steps in our method. First, by controlling the detuning between qubits, the microwave induced classi…
We present a scalable quantum-bus-based device for generating the entanglement on microwave photons (MPs) in distant superconducting resonators (SRs). Different from the processors in previous works with some resonators coupled to a superconducting qubit (SQ), our device is composed of some 1D SRs $r_j$ which are coupled to the quantum bus (another common resonator $R$) in its different positions simply, assisted by superconducting quantum interferometer devices. By using the technique for catching and releasing a MP state in a 1D SR, it can work as an entanglement generator or a node in quant…
Large-scale quantum information processors or quantum communication networks will require reliable exchange of information between spatially separated nodes. The links connecting these nodes can be established using traveling photons that need to be absorbed at the receiving node with high efficiency. This is achievable by shaping the temporal profile of the photons and absorbing them at the receiver by time reversing the emission process. Here, we demonstrate a scheme for creating shaped microwave photons using a superconducting transmon-type three-level system coupled to a transmission line …
Inter-qubit coupling and qubit connectivity in a processor are crucial for achieving high fidelity multi-qubit gates and efficient implementation of quantum algorithms. Typical superconducting processors employ relatively weak transverse inter-qubit coupling which are activated via frequency tuning or microwave drives. Here, we propose a class of multi-mode superconducting circuits which realize multiple transmon qubits with all-to-all longitudinal coupling. These "artificial molecules" directly implement a multi-dimensional Hilbert space that can be easily manipulated due to the always-on lon…
A quantum memory that can store quantum states faithfully and retrieve them on demand has wide applications in quantum information science. An efficient quantum memory in the microwave regime working alongside quantum processors based on superconducting quantum circuits may serve as an important architecture for quantum computers. Here we realize on-demand storage and retrieval of weak coherent microwave photon pulses at the single-photon level. We implement a superconducting multi-resonator quantum memory which is composed of a set of frequency-tunable coplanar transmission line (CPW) resonat…
Realistic modeling of qubit systems including noise and constraints imposed by control hardware is required for performance prediction and control optimization of quantum processors. We introduce qopt, a software framework for simulating qubit dynamics and robust quantum optimal control considering common experimental situations. To this end, we model open and closed qubit systems with a focus on the simulation of realistic noise characteristics and experimental constraints. Specifically, the influence of noise can be calculated using Monte Carlo methods, effective master equations or with the…
We investigate a hybrid quantum circuit where ensembles of cold polar molecules serve as long-lived quantum memories and optical interfaces for solid state quantum processors. The quantum memory realized by collective spin states (ensemble qubit) is coupled to a high-Q stripline cavity via microwave Raman processes. We show that for convenient trap-surface distances of a few $μ$m, strong coupling between the cavity and ensemble qubit can be achieved. We discuss basic quantum information protocols, including a swap from the cavity photon bus to the molecular quantum memory, and a deterministic …
A challenge in building large-scale superconducting quantum processors is to find the right balance between coherence, qubit addressability, qubit-qubit coupling strength, circuit complexity and the number of required control lines. Leading all-microwave approaches for coupling two qubits require comparatively few control lines and benefit from high coherence but suffer from frequency crowding and limited addressability in multi-qubit settings. Here, we overcome these limitations by realizing an all-microwave controlled-phase gate between two transversely coupled transmon qubits which are far …
Stark shift on a superconducting qubit in circuit quantum electrodynamics (QED) has been used to construct universal quantum entangling gates on superconducting resonators in previous works. It is a second-order coupling effect between the resonator and the qubit in the dispersive regime, which leads to a slow state-selective rotation on the qubit. Here, we present two proposals to construct the fast universal quantum gates on superconducting resonators in a microwave-photon quantum processor composed of multiple superconducting resonators coupled to a superconducting transmon qutrit, that is,…
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable $ZZ$ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off-resonantly. We show tunable coupling over one order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of …
