Hexagonal boron nitride (h-BN) is unique among two-dimensional materials, with a large band gap (~6 eV) and high thermal conductivity (>400 W/m/K), second only to diamond among electrical insulators. Most electronic studies to date have relied on h-BN exfoliated from bulk crystals; however, for scalable applications the material must be synthesized by methods such as chemical vapor deposition (CVD). Here, we demonstrate single- and few-layer h-BN synthesized by CVD on single crystal platinum and on carbon nanotube (CNT) substrates, also comparing these films with h-BN deposited on the more commonly used polycrystalline Pt and Cu growth substrates. The h-BN film grown on single crystal Pt has a lower surface roughness and is more spatially homogeneous than the film from a polycrystalline Pt foil, and our electrochemical transfer process allows for these expensive foils to be reused with no measurable degradation. In addition, we demonstrate monolayer h-BN as an ultrathin, 3.33 $\unicode{x212B}$ barrier protecting MoS2 from damage at high temperatures and discuss other applications that take advantage of the conformal h-BN deposition on various substrates demonstrated in this work.
Monolayer of hexagonal boron nitride (h-BN), commonly known as "white graphene" is a promising wide bandgap semiconducting material for deep-ultaviolet optoelectronic devices. In this report, the light absorption of a single layer hexagonal boron nitride is calculated using a tight-binding Hamiltonian. The absorption is found to be monotonically decreasing function of photon energy compared to graphene where absorption coefficient is independent of photon energy and characterized by the effective fine-structure constant.
An ab initio calculations have been carried out for examining the curvature effect of small diameter hexagonal boron nanotubes. The considered conformations of boron nanotubes are namely armchair (3,3), zigzag (5,0) and chiral (4,2), and consist of 12, 20, and 56 atoms, respectively. The strain energy is evaluated in order to examine the curvature effect. It is found that the strain energy of hexagonal BNT strongly depends upon the radius, whereas the strain energy of triangular BNTs depends on both radius and chirality.
There is a strong interest to attach nanoparticles non-covalently to one-dimensional systems like boron nitride nanotubes to form composites. The combination of those materials might be used for catalysis, in solar cells, or for water splitting. Additionally, the fundamental aspect of charge transfer between the components can be studied in such systems. We report on the synthesis and characterization of nanocomposites based on semiconductor nanoparticles attached directly and non-covalently to boron nitride nanotubes. Boron nitride nanotubes were simply integrated into the colloidal synthesis…
The influence of triaxial in-plane strain on the electronic properties of a hexagonal boron-nitride sheet is investigated using density functional theory. Different from graphene, the triaxial strain localizes the molecular orbitals of the boron-nitride flake in its center depending on the direction of the applied strain. The proposed technique for localizing the molecular orbitals that are close to the Fermi level in the center of boron nitride flakes can be used to actualize engineered nanosensors, for instance, to selectively detect gas molecules. We show that the central part of the strain…
We study silicene on hexagonal boron nitride, using first principles calculations. Since hexagonal boron nitride is semiconducting, the interaction with silicene is weaker than for metallic substrates. It therefore is possible to open a 50 meV band gap in the silicene. We further address the effect of Mn decoration by determining the onsite Hubbard interaction parameter, which turns out to differ significantly for decoration at the top and hollow sites. The induced magnetism in the system is analyzed in detail.
We have carried out first-principles calculations on electronic properties of graphene quantum dots embedded in hexagonal boron nitride monolayer sheets. The calculations with density functional theory show that the band gaps of quantum dots are determined by the quantum confinement effects and the hybridization of π orbitals from B, N and C atoms. The energy states near the Fermi level are found to be strongly localized within and in the vicinity of the quantum dots.
Novel materials with tunable magnetic states play a significant role in the development of next-generation spintronic devices. In this paper, we examine the role of biaxial strain on the electronic properties of vacancy-decorated hexagonal boron nitride (h-BN) monolayers using density functional theory calculations. We found that the strain can lead to switching of the magnetic state for h-BN monolayers with boron vacancy or divacancy. Our findings promise a new route for the operation of low-dimensional spintronic devices.
The design of stacks of layered materials in which adjacent layers interact by van der Waals forces[1] has enabled the combination of various two-dimensional crystals with different electrical, optical and mechanical properties, and the emergence of novel physical phenomena and device functionality[2-8]. Here we report photo-induced doping in van der Waals heterostructures (VDHs) consisting of graphene and boron nitride layers. It enables flexible and repeatable writing and erasing of charge doping in graphene with visible light. We demonstrate that this photo-induced doping maintains the high…
A continuum theory to describe periodic ripple formation in planar graphene/boron nitride superlattices is formulated. Due to the lattice mismatch between the two materials, it is shown that flat superlattices are unstable with respect to ripple formation of appropriate wavelengths. A competition between bending energy and transverse stretching energy gives rise to an optimal ripple wavelength that depends on the superlattice pitch. The optimal wavelengths predicted by the continuum theory are in good agreement with atomic scale total energy calculations previously reported in Nandwana and Ert…
The field of graphene research has developed rapidly since its first isolation by mechanical exfoliation in 2004. Due to the relativistic Dirac nature of its charge carriers, graphene is both a promising material for next-generation electronic devices and a convenient low-energy testbed for intrinsically high-energy physical phenomena. Both of these research branches require the facile fabrication of clean graphene devices so as not to obscure its intrinsic physical properties. Hexagonal boron nitride has emerged as a promising substrate for graphene devices, as it is insulating, atomically fl…
Quantum emitters in layered materials are promising candidates for applications in nanophotonics. Here we present a technique based on charge transfer to graphene for measuring the charge transition levels ($\rm E_t$) of fluorescent defects in a wide bandgap 2D material, and apply it to quantum emitters in hexagonal boron nitride (hBN). Our results will aid in identifying the atomic structures of quantum emitters in hBN, as well as practical applications since $\rm E_t$ determines defect charge states and plays a key role in photodynamics.
We propose monolayer epitaxial graphene and hexagonal boron nitride (h-BN) as ultimate thickness covalent spacers for magnetoresistive junctions. Using a first-principles approach, we investigate the structural, magnetic and spin transport properties of such junctions based on structurally well defined interfaces with (111) fcc or (0001) hcp ferromagnetic transition metals. We find low resistance area products, strong exchange couplings across the interface, and magnetoresistance ratios exceeding 100% for certain chemical compositions. These properties can be fine tuned, making the proposed ju…
We demonstrate single crystal growth of wafer-scale hexagonal boron nitride (hBN), an insulating atomic thin monolayer, on high-symmetry index surface plane Cu(111). The unidirectional epitaxial growth is guaranteed by large binding energy difference, ~0.23 eV, between A- and B-steps edges on Cu(111) docking with B6N7 clusters, confirmed by density functional theory calculations.
Despite recent successes in the synthesis of boron nanotubes (BNTs), the atomic arrangement of their walls has not yet been determined and many questions about their basic properties do remain. Here, we unveil the dynamical stability of BNTs by means of first-principles molecular dynamics simulations. We find that free-standing, single-wall BNTs with diameters larger than 0.6 nm are thermally stable at the experimentally reported synthesis temperature of 870$^\circ$C and higher. The walls of thermally stable BNTs are found to have a variety of different mixed triangular-hexagonal morphologies.…
We show that carbon-doped hexagonal boron nitride (h-BN) has extraordinary properties with many possible applications. We demonstrate that the substitution-induced impurity states, associated with carbon atoms, and their interactions dictate the electronic structure and properties of C-doped h-BN. Furthermore, we show that stacking of localized impurity states in small C clusters embedded in h-BN forms a set of discrete energy levels in the wide gap of h-BN. The electronic structures of these C clusters have a plethora of applications in optics, magneto-optics, and opto-electronics.
Two-dimensional materials are characterised by a number of unique physical properties which can potentially make them useful to a wide diversity of applications. In particular, the large thermal conductivity of graphene and hexagonal boron nitride has already been acknowledged and these materials have been suggested as novel core materials for thermal management in electronics. However, it was not clear if mass produced flakes of hexagonal boron nitride would allow one to achieve an industrially-relevant value of thermal conductivity. Here we demonstrate that laminates of hexagonal boron nitri…
Recently, Bafekry et al. [J. Appl. Phys. 130, 114301(2021)] reported their density functional theory (DFT) results on the structural, phonon dispersion, elastic constants and electronic properties of a BCN monolayer. The aforementioned theoretical work however includes erroneous results and discussions, as will be explained in the following.
We calculate theoretically the disorder-limited conductivity of monolayer and bilayer graphene on hexagonal boron nitride (h-BN) substrates, comparing our theoretical results with the recent experimental results. The comparison leads to a direct quantitative estimate of the underlying disorder strength for both short-range and long-range disorder in the graphene on h-BN system. We find that the good interface quality between graphene and h-BN leads to strongly suppressed charged impurity scattering compared with the corresponding SiO$_2$ substrate case, thus producing very high mobility for th…
We investigate tunneling in metal-insulator-metal junctions employing few atomic layers of hexagonal boron nitride (hBN) as the insulating barrier. While the low-bias tunnel resistance increases nearly exponentially with barrier thickness, subtle features are seen in the current-voltage curves, indicating marked influence of the intrinsic defects present in the hBN insulator on the tunneling transport. In particular, single electron charging events are observed, which are more evident in thicker-barrier devices where direct tunneling is substantially low. Furthermore, we find that annealing th…
The hybrid graphene - hexagonal boron nitride (G-hBN) systems offer new routes in the design of nanoscale electronic devices. Using {\it ab initio} density functional theory calculations we investigate the dynamics of zig-zag nanoribbons a few interatomic distances wide. Several structures are analyzed, namely pristine graphene, hBN and G-hBN systems. By passivating the nanoribbon edges with hydrogen and different halogen atoms, one may tune the electronic and mechanical properties, like the band gap energies and the natural frequencies of vibration.
We describe the identification of single- and few- layer boron nitride. Its optical contrast is much smaller than that of graphene but even monolayers are discernable by optimizing viewing conditions. Raman spectroscopy can be used to confirm BN monolayers. They exhibit an upshift in the fundamental Raman mode by up to 4 cm-1. The number of layers in thicker crystals can be counted by exploiting an integer-step increase in the Raman intensity and optical contrast.
We demonstrate a simple method to manipulate and exfoliate thick hexagonal boron nitride (h-BN) flakes using an atomic force microscope (AFM) cantilever and tip mounted to a micromanipulator stage. Thick flakes of tens to hundreds of nanometers can be thinned down to large area, few-layer and monolayer flakes. We characterize the resulting thinned-down flakes using AFM and Raman spectroscopy. This technique is extendable to other two dimensional, van der Waals materials.
Few-layer flakes of hexagonal boron nitride were prepared by ultrasonication of bulk crystals and agglomerated to form thin films. The transmission and reflection spectra of the thin films were measured. The spectral dependences of the linear and circular polarization revealed a hidden anisotropy of the films over the whole sample area which could not be explained by the anisotropy of the chaotically-oriented individual particles. Statistical analysis of optical microscopy images showed a macroscopic particle density distribution with ordering corresponding to the optical axis observed in the …
The atomically-precise controlled synthesis of graphene stripes embedded in hexagonal boron nitride opens up new possibilities for the construction of nanodevices with applications in sensing. Here, we explore properties related to electronic structure and quantum transport of a graphene nanoroad embedded in hexagonal boron nitride, using a combination of density functional theory and the non-equilibrium Green's functions method to calculate the electric conductance. We find that the graphene nanoribbon signature is preserved in the transmission spectra and that the local current is mainly con…
Devising ways of opening a band gap in graphene to make charge-carrier masses finite is essential for many applications. Recent experiments with graphene on hexagonal boron nitride (h-BN) offer tantalizing hints that the weak interaction with the substrate is sufficient to open a gap, in contradiction of earlier findings. Using many-body perturbation theory, we find that the small observed gap is what remains after a much larger underlying quasiparticle gap is suppressed by incommensurability. The sensitivity of this suppression to a small modulation of the distance separating graphene from th…
2D ferroelectrics with robust polarization down to atomic thicknesses provide novel building blocks for functional heterostructures. Experimental reports, however, remain scarce because of the requirement of a layered polar crystal. Here, we demonstrate a rational design approach to engineering 2D ferroelectrics from a non-ferroelectric parent compound via employing van der Waals assembly. Parallel-stacked bilayer boron nitride is shown to exhibit out-of-plane electric polarization that reverses depending on the stacking order. The polarization switching is probed via the resistance of an adja…
We investigate the symmetry of the boron buckyball and a related boron nanotube. Using large-scale ab-initio calculations up to second-order Møller Plesset perturbation theory, we have determined unambiguously the equilibrium geometry/symmetry of two structurally related boron clusters: the B80 fullerene and the finite-length (5,0) boron nanotube. The B80 cluster was found to have the same symmetry, Ih, as the C60 molecule since its 20 additional boron atoms are located exactly at the centers of the 20 hexagons. Additionally, we also show that the (5,0) boron nanotube does not suffer from atom…
All local electronic properties of graphene on a hexagonal boron nitride (hBN) substrate exhibit spatial moiré patterns related to lattice constant and orientation differences between shared triangular Bravais lattices. We apply a previously derived effective Hamiltonian for the $π$-bands of graphene on h-BN to address the carrier-dependence of transport properties, concentrating on the conductivity features at four electrons and four holes per unit cell. These transport features measure the strength of Bragg scattering of $π$-electrons off the moiré pattern, and exhibit a striking particle-ho…
We investigate by means of DFT/GGA+U calculations the electronic and structural properties of magnetic nanotubes composed of an iron oxide monolayer and (n,0) Boron Nitride (BN) nanotubes, with n ranging from 6 up to 14. The formation energy per FeO molecule of FeO covered tubes is smaller than the formation energy of small FeO nanoparticles which suggest that the FeO molecules may cover the BN nanotubes rather than to aggregate to form the FeO bulk. We propose a continuous model for the FeO covered BN nanotubes formation energy which predicts that BN tubes with diameter of roughly 13 Åare the…
Optical reflectivity contrast provides a simple, fast and noninvasive method for characterization of few monolayer samples of two-dimensional materials. Here we apply this technique to measure the thickness of thin flakes of hexagonal Boron Nitride (hBN), which is a material of increasing interest in nanodevice fabrication. The optical contrast shows a strong negative peak at short wavelengths and zero contrast at a thickness dependent wavelength. The optical contrast varies linearly for 1-80 layers of hBN, which permits easy calibration of thickness. We demonstrate the applicability of this q…
Friction is one of the main sources of dissipation at liquid water/solid interfaces. Despite recent progress, a detailed understanding of water/solid friction in connection with the structure and energetics of the solid surface is lacking. Here we show for the first time that \textit{ab initio} molecular dynamics can be used to unravel the connection between the structure of nanoscale water and friction for liquid water in contact with graphene and with hexagonal boron nitride. We find that whilst the interface presents a very similar structure between the two sheets, the friction coefficient …
We present a new class of boron sheets, composed of triangular and hexagonal motifs, that are more stable than structures considered to date and thus are likely to be the precursors of boron nanotubes. We describe a simple and clear picture of electronic bonding in boron sheets and highlight the importance of three-center bonding and its competition with two-center bonding, which can also explain the stability of recently discovered boron fullerenes. Our findings call for reconsideration of the literature on boron sheets, nanotubes, and clusters.
The substrate material of monolayer graphene influences the charge carrier mobility by various mechanisms. At room temperature, the scattering of conduction electrons by phonon modes localized at the substrate surface can severely limit the charge carrier mobility. We here show that for substrates made of the piezoelectric hexagonal boron nitride (hBN), in comparison to the widely used SiO$_2$, this mechanism of remote phonon scattering is --at room temperature-- weaker by almost an order of magnitude, and causes a resistivity of approximately 3\,$Ω$. This makes hBN an excellent candidate mate…
Using the minima hopping global geometry optimization method on the density functional potential energy surface we study medium size and large boron clusters. Even though for isolated medium size clusters the ground state is a cage like structure they are unstable against external perturbations such as contact with other clusters. The energy landscape of larger boron clusters is glass like and has a large number of structures which are lower in energy than the cages. This is in contrast to carbon and boron nitride systems which can be clearly identified as structure seekers in our minima hoppi…
The configurations, stability and electronic structures of a new class of boron sheet and related boron nanotubes are predicted within the framework of density functional theory. This boron sheet is sparser than those of recent proposals. Our theoretic results show that the stable boron sheet remains flat and is metallic. There are bands similar to the p-bands in graphite near the Fermi level. Stable nanotubes with various diameters and chiral vectors can be rolled from the sheet. Within our study, only the thin (8, 0) nanotube with a band gap of 0.44 eV is semiconducting, while all the other …
We perform both lattice dynamics analysis and molecular dynamics simulations to demonstrate the existence of topologically protected phonon modes in a two-dimensional, monolayer hexagonal boron nitride sheet. The topological phonon modes are found to be localized at an in-plane interface that divides the system into two regions of distinct valley Chern numbers. The dispersion of this topological phonon mode crosses over the frequency gap [1123, 1278] cm^{-1}, which is opened through analogy with the quantum valley Hall effect by breaking inversion symmetry of the boron and nitride atoms in the…
We determine the electronic structure of a graphene sheet on top of a lattice-matched hexagonal boron nitride (h-BN) substrate using ab initio density functional calculations. The most stable configuration has one carbon atom on top of a boron atom, the other centered above a BN ring. The resulting inequivalence of the two carbon sites leads to the opening of a gap of 53 meV at the Dirac points of graphene and to finite masses for the Dirac fermions. Alternative orientations of the graphene sheet on the BN substrate generate similar band gaps and masses. The band gap induced by the BN surface …
Chemical vapor deposited (CVD) graphene is often presented as a scalable solution to graphene device fabrication, but to date such graphene has exhibited lower mobility than that produced by exfoliation. Using a boron nitride underlayer, we achieve mobilities as high as 37,000 cm^2/Vs, an order of magnitude higher than commonly reported for CVD graphene and better than most exfoliated graphene. This result demonstrates that the barrier to scalable, high mobility CVD graphene is not the growth technique but rather the choice of a substrate that minimizes carrier scattering.
Van der Waals heterostructures formed by assembling different two-dimensional atomic crystals into stacks can lead to many new phenomena and device functionalities. In particular, graphene/boron-nitride heterostructures have emerged as a very promising system for band engineering of graphene. However, the intrinsic value and origin of the bandgap in such heterostructures remain unresolved. Here we report the observation of an intrinsic bandgap in epitaxial graphene/boron-nitride heterostructures with zero crystallographic alignment angle. Magneto-optical spectroscopy provides a direct probe of…
In an attempt to understand why catalytic methods for the growth of boron nitride nanotubes work much worse than for their carbon counterparts, we use first-principles calculations to study the energetics of elemental reactions forming N2, B2 and BN molecules on an iron catalyst. We observe that in the case of these small molecules, the catalytic activity is hindered by the formation of B2 on the iron surface. We also observe that the local morphology of a step edge present in our nanoparticle model stabilizes the boron nitride molecule with respect to B2 due to the ability of the step edge to…
Cathodoluminescence imaging and spectroscopy experiments on a single bamboo-like boron nitride nanotube are reported. Imaging experiments show that the luminescence is located all along the nanotube. Spectroscopy experiments point out the important role of dimensionality in this one dimensional object.
High pressure Raman experiments on Boron Nitride multi-walled nanotubes show that the intensity of the vibrational mode at ~ 1367 cm-1 vanishes at ~ 12 GPa and it does not recover under decompression. In comparison, the high pressure Raman experiments on hexagonal Boron Nitride show a clear signature of a phase transition from hexagonal to wurtzite at ~ 13 GPa which is reversible on decompression. These results are contrasted with the pressure behavior of carbon nanotubes and graphite.
The current rechargeable battery technologies have a failure in their performance at high pressure and temperature. In this article, we have brought theoretical insights on using boron nitride flakes as a protecting layer for a lithium-ion battery device and extended its application for a spin-dependent photon emission device. Hence, the electronic properties of pristine and lithium-doped hydrogen-edged boron nitride flakes have been studied by the first principle density functional theory calculations. In this study, we have discussed the stability, adsorption energies, bond lengths, electron…
Based on a numerical ab initio study, we discuss a structure model for a broad boron sheet, which is the analog of a single graphite sheet, and the precursor of boron nanotubes. The sheet has linear chains of sp hybridized sigma bonds lying only along its armchair direction, a high stiffness, and anisotropic bonds properties. The puckering of the sheet is explained as a mechanism to stabilize the sp sigma bonds. The anisotropic bond properties of the boron sheet lead to a two-dimensional reference lattice structure, which is rectangular rather than triangular. As a consequence the chiral angle…
The recent discovery of pure boron nanotubes raises questions about their detailed atomic structure. Previous simulations predicted tubular structures with smooth or puckered surfaces. Here, we present some novel results based on ab initio simulations of bundled single-wall zigzag boron nanotubes (ropes). Besides the known smooth and puckered modifications, we found new forms that are radially constricted, and which seem to be energetically superior to the known isomers. Furthermore, those structures might be interpreted as intermediate states between ideal tubular phases and the known bulk ph…
Ab initio density-functional theory study suggests that pillared Li-dispersed boron carbide nanotubes is capable of storing hydrogen with a mass density higher than 6.0 weight% and a volumetric density higher than 45 g/L. The boron substitution in carbon nanotube greatly enhances the binding energy of Li atom to the nanotube, and this binding energy (~ 2.7 eV) is greater than the cohesive energy of lithium metal (~1.7 eV), preventing lithium from aggregation (or segregation) at high lithium doping concentration. The adsorption energy of hydrogen on the Li-dispersed boron carbide nanotube is in…
We report on the measurement of the effective radial modulus of multiwalled Boron Nitride nanotubes with external radii in the range 3.7 to 36 nm and number of layers in between 5 and 48. These Boron Nitride nanotubes are radially much stiffer than previously reported thinner and smaller Boron Nitride nanotubes. Here, we show the key role of the morphology of the nanotubes in determining their radial rigidity, in particular we find that the external and internal radii, R_ext and R_int, have a stronger influence on the radial modulus than the NT's thickness, t. We find that the effective radial…
Imaging and spectroscopy performed in a low-voltage scanning transmission electron microscope (LV-STEM) are used to characterize the structure and chemical properties of boron-terminated tetravacancies in hexagonal boron nitride (h-BN). We confirm earlier theoretical predictions about the structure of these defects and identify new features in the electron energy-loss spectra (EELS) of B atoms using high resolution chemical maps, highlighting differences between these areas and pristine sample regions. We correlate our experimental data with calculations which help explain our observations.
We investigate the field emission properties of nitrogenated and boronated carbon nanotubes using time-dependent density functional theory, were the wave function propagation is performed using the Crank-Nicholson algorithm. We extract the current-voltage characteristics of the emitted electrons from nanotubes with different doping configurations. We found that boron doping either impedes, or slightly enhances, field emission. Nitrogen strongly influences the emission current, and the current is sensitive to the location of the nitrogen dopant in the nanotube. The emitted charge cloud from nit…
The effect of doping of cubic boron nitride with beryllium, silicon, sulfur and magnesium on the lattice parameters, electrical conductivity and EPR spectra has been studied. It is established that the degree of doping increases significantly in the case of crystallization of cubic boron nitride from BN solutions in supercritical ammonia at 3.9-4.2 GPa and 1100°C in comparison with the conventional synthesis from melts of the Mg-B-N system at 4.2 GPa and 1400°C. Doping with silicon and beryllium results in semiconductor properties of cubic boron nitride.
A comparison between experimental and theoretical electron Energy Loss Near Edge Structure (ELNES) of B and N K-edges in cubic boron nitride is presented. The electron energy loss spectra of cubic boron nitride particles were measured using a scanning transmission electron microscope. The theoretical calculation of the ELNES was performed within the framework of density functional theory including single particle core-hole effects. It is found that experimental and calculated ELNES of both the B and N K-edges in cubic boron nitride show excellent agreement.
Ab initio calculations of the spontaneous polarization and piezoelectric properties of boron nitride nanotubes show that they are excellent piezoelectric systems with response values larger than those of piezoelectric polymers. The intrinsic chiral symmetry of the nanotubes induces an exact cancellation of the total spontaneous polarization in ideal, isolated nanotubes of arbitrary indices. Breaking of this symmetry by inter-tube interaction or elastic deformations induces spontaneous polarization comparable to those of wurtzite semiconductors.
Recently hybridized monolayers consisting of hexagonal boron nitride (h-BN) phases inside graphene layer have been synthesized and shown to be an effective way of opening band gap in graphene monolayers [1]. In this letter, we report an ab initio density functional theory (DFT)- based study of h-BN domain size effect on the elastic properties of graphene/boron nitride hybrid monolayers (h-BNC). We found both inplane stiffness and longitudinal sound velocity of h-BNC linearly decrease with h-BN concentration.
Graphene nanoribbons are prepared inside boron nitride nanotubes by liquid phase encapsulation and subsequent annealing of 1,2,4-trichlorobenzene. The product is imaged with high resolution transmission electron microscopy, and characterized by optical absorption and Raman spectroscopy. Carbon-containing material is detected inside the boron nitride nanotubes with energy-dispersive x-ray spectroscopy (EDS) and scanning transmission electron microscopy (STEM). The observed structures twist under the electron beam and the characteristic features of nanoribbons appear in the Raman spectra.
Boron-doped multi-walled carbon nanotubes (MWNTs) were synthesized using a methanol solution of boric acid as a source material. Accurate measurements of the electrical resistivity of an individual boron-doped MWNT was performed with a four-point contact, which was fabricated using an electron beam lithography technique. The doped boron provides conduction carriers, which reduces the resistivity of the MWNT.
We have studied zig-zag boron nitride (BN) nanotubes doped with the Ni hexagonal-closepacked nanowire. The doped BN nanotubes are ferromagnetic metals with substantial magnetism. Some special magnetic properties resulting from the interaction between the Ni nanowire and BN nanotubes are found. The Ni doped BN(9,0) nanotube shows semi-half-metallic behavior, which could become half-metallic after doping electrons more than 1.4 e/unit cell. The intrinsic halfmetallic behavior could be achieved by two dierent ways: one is coating the Ni nanowire with a smaller BN nanotube, i.e., BN(8,0), the othe…
Nanostructure and mechanical properties of bulk nanocristalline cubic boron nitride have been studied by transmission electron microscopy, and micro- and nanoindentation. The obtained data on hardness, elastic properties and fracture toughness clearly indicate that nano-cBN belongs to a family of advanced ultra-hard materials.
We represent the results of quantum chemical calculations of boron nitride nanotubes intercalated by alkali and alkali-earth metall atoms and its ions. It was obtained that unpair spins were localized on seperated metal atoms. So we propose to construct the two-qubit cells on the basis of infilled boron nitride nanotubes for the quantum computer.
