The field of graphene research has developed rapidly since its first isolation by mechanical exfoliation in 2004. Due to the relativistic Dirac nature of its charge carriers, graphene is both a promising material for next-generation electronic devices and a convenient low-energy testbed for intrinsically high-energy physical phenomena. Both of these research branches require the facile fabrication of clean graphene devices so as not to obscure its intrinsic physical properties. Hexagonal boron nitride has emerged as a promising substrate for graphene devices, as it is insulating, atomically flat and provides a clean charge environment for the graphene. Additionally, the interaction between graphene and boron nitride provides a path for the study of new physical phenomena not present in bare graphene devices. This review focuses on recent advancements in the study of graphene on hexagonal boron nitride devices from the perspective of scanning tunneling microscopy with highlights of some important results from electrical transport measurements.
Monolayer of hexagonal boron nitride (h-BN), commonly known as "white graphene" is a promising wide bandgap semiconducting material for deep-ultaviolet optoelectronic devices. In this report, the light absorption of a single layer hexagonal boron nitride is calculated using a tight-binding Hamiltonian. The absorption is found to be monotonically decreasing function of photon energy compared to graphene where absorption coefficient is independent of photon energy and characterized by the effective fine-structure constant.
The influence of triaxial in-plane strain on the electronic properties of a hexagonal boron-nitride sheet is investigated using density functional theory. Different from graphene, the triaxial strain localizes the molecular orbitals of the boron-nitride flake in its center depending on the direction of the applied strain. The proposed technique for localizing the molecular orbitals that are close to the Fermi level in the center of boron nitride flakes can be used to actualize engineered nanosensors, for instance, to selectively detect gas molecules. We show that the central part of the strain…
We study silicene on hexagonal boron nitride, using first principles calculations. Since hexagonal boron nitride is semiconducting, the interaction with silicene is weaker than for metallic substrates. It therefore is possible to open a 50 meV band gap in the silicene. We further address the effect of Mn decoration by determining the onsite Hubbard interaction parameter, which turns out to differ significantly for decoration at the top and hollow sites. The induced magnetism in the system is analyzed in detail.
We have carried out first-principles calculations on electronic properties of graphene quantum dots embedded in hexagonal boron nitride monolayer sheets. The calculations with density functional theory show that the band gaps of quantum dots are determined by the quantum confinement effects and the hybridization of π orbitals from B, N and C atoms. The energy states near the Fermi level are found to be strongly localized within and in the vicinity of the quantum dots.
Novel materials with tunable magnetic states play a significant role in the development of next-generation spintronic devices. In this paper, we examine the role of biaxial strain on the electronic properties of vacancy-decorated hexagonal boron nitride (h-BN) monolayers using density functional theory calculations. We found that the strain can lead to switching of the magnetic state for h-BN monolayers with boron vacancy or divacancy. Our findings promise a new route for the operation of low-dimensional spintronic devices.
There is a strong interest to attach nanoparticles non-covalently to one-dimensional systems like boron nitride nanotubes to form composites. The combination of those materials might be used for catalysis, in solar cells, or for water splitting. Additionally, the fundamental aspect of charge transfer between the components can be studied in such systems. We report on the synthesis and characterization of nanocomposites based on semiconductor nanoparticles attached directly and non-covalently to boron nitride nanotubes. Boron nitride nanotubes were simply integrated into the colloidal synthesis…
The design of stacks of layered materials in which adjacent layers interact by van der Waals forces[1] has enabled the combination of various two-dimensional crystals with different electrical, optical and mechanical properties, and the emergence of novel physical phenomena and device functionality[2-8]. Here we report photo-induced doping in van der Waals heterostructures (VDHs) consisting of graphene and boron nitride layers. It enables flexible and repeatable writing and erasing of charge doping in graphene with visible light. We demonstrate that this photo-induced doping maintains the high…
A continuum theory to describe periodic ripple formation in planar graphene/boron nitride superlattices is formulated. Due to the lattice mismatch between the two materials, it is shown that flat superlattices are unstable with respect to ripple formation of appropriate wavelengths. A competition between bending energy and transverse stretching energy gives rise to an optimal ripple wavelength that depends on the superlattice pitch. The optimal wavelengths predicted by the continuum theory are in good agreement with atomic scale total energy calculations previously reported in Nandwana and Ert…
Quantum emitters in layered materials are promising candidates for applications in nanophotonics. Here we present a technique based on charge transfer to graphene for measuring the charge transition levels ($\rm E_t$) of fluorescent defects in a wide bandgap 2D material, and apply it to quantum emitters in hexagonal boron nitride (hBN). Our results will aid in identifying the atomic structures of quantum emitters in hBN, as well as practical applications since $\rm E_t$ determines defect charge states and plays a key role in photodynamics.
We propose monolayer epitaxial graphene and hexagonal boron nitride (h-BN) as ultimate thickness covalent spacers for magnetoresistive junctions. Using a first-principles approach, we investigate the structural, magnetic and spin transport properties of such junctions based on structurally well defined interfaces with (111) fcc or (0001) hcp ferromagnetic transition metals. We find low resistance area products, strong exchange couplings across the interface, and magnetoresistance ratios exceeding 100% for certain chemical compositions. These properties can be fine tuned, making the proposed ju…
We demonstrate single crystal growth of wafer-scale hexagonal boron nitride (hBN), an insulating atomic thin monolayer, on high-symmetry index surface plane Cu(111). The unidirectional epitaxial growth is guaranteed by large binding energy difference, ~0.23 eV, between A- and B-steps edges on Cu(111) docking with B6N7 clusters, confirmed by density functional theory calculations.
We show that carbon-doped hexagonal boron nitride (h-BN) has extraordinary properties with many possible applications. We demonstrate that the substitution-induced impurity states, associated with carbon atoms, and their interactions dictate the electronic structure and properties of C-doped h-BN. Furthermore, we show that stacking of localized impurity states in small C clusters embedded in h-BN forms a set of discrete energy levels in the wide gap of h-BN. The electronic structures of these C clusters have a plethora of applications in optics, magneto-optics, and opto-electronics.
Two-dimensional materials are characterised by a number of unique physical properties which can potentially make them useful to a wide diversity of applications. In particular, the large thermal conductivity of graphene and hexagonal boron nitride has already been acknowledged and these materials have been suggested as novel core materials for thermal management in electronics. However, it was not clear if mass produced flakes of hexagonal boron nitride would allow one to achieve an industrially-relevant value of thermal conductivity. Here we demonstrate that laminates of hexagonal boron nitri…
Recently, Bafekry et al. [J. Appl. Phys. 130, 114301(2021)] reported their density functional theory (DFT) results on the structural, phonon dispersion, elastic constants and electronic properties of a BCN monolayer. The aforementioned theoretical work however includes erroneous results and discussions, as will be explained in the following.
We calculate theoretically the disorder-limited conductivity of monolayer and bilayer graphene on hexagonal boron nitride (h-BN) substrates, comparing our theoretical results with the recent experimental results. The comparison leads to a direct quantitative estimate of the underlying disorder strength for both short-range and long-range disorder in the graphene on h-BN system. We find that the good interface quality between graphene and h-BN leads to strongly suppressed charged impurity scattering compared with the corresponding SiO$_2$ substrate case, thus producing very high mobility for th…
We investigate tunneling in metal-insulator-metal junctions employing few atomic layers of hexagonal boron nitride (hBN) as the insulating barrier. While the low-bias tunnel resistance increases nearly exponentially with barrier thickness, subtle features are seen in the current-voltage curves, indicating marked influence of the intrinsic defects present in the hBN insulator on the tunneling transport. In particular, single electron charging events are observed, which are more evident in thicker-barrier devices where direct tunneling is substantially low. Furthermore, we find that annealing th…
The hybrid graphene - hexagonal boron nitride (G-hBN) systems offer new routes in the design of nanoscale electronic devices. Using {\it ab initio} density functional theory calculations we investigate the dynamics of zig-zag nanoribbons a few interatomic distances wide. Several structures are analyzed, namely pristine graphene, hBN and G-hBN systems. By passivating the nanoribbon edges with hydrogen and different halogen atoms, one may tune the electronic and mechanical properties, like the band gap energies and the natural frequencies of vibration.
We describe the identification of single- and few- layer boron nitride. Its optical contrast is much smaller than that of graphene but even monolayers are discernable by optimizing viewing conditions. Raman spectroscopy can be used to confirm BN monolayers. They exhibit an upshift in the fundamental Raman mode by up to 4 cm-1. The number of layers in thicker crystals can be counted by exploiting an integer-step increase in the Raman intensity and optical contrast.
We demonstrate a simple method to manipulate and exfoliate thick hexagonal boron nitride (h-BN) flakes using an atomic force microscope (AFM) cantilever and tip mounted to a micromanipulator stage. Thick flakes of tens to hundreds of nanometers can be thinned down to large area, few-layer and monolayer flakes. We characterize the resulting thinned-down flakes using AFM and Raman spectroscopy. This technique is extendable to other two dimensional, van der Waals materials.
Few-layer flakes of hexagonal boron nitride were prepared by ultrasonication of bulk crystals and agglomerated to form thin films. The transmission and reflection spectra of the thin films were measured. The spectral dependences of the linear and circular polarization revealed a hidden anisotropy of the films over the whole sample area which could not be explained by the anisotropy of the chaotically-oriented individual particles. Statistical analysis of optical microscopy images showed a macroscopic particle density distribution with ordering corresponding to the optical axis observed in the …
The atomically-precise controlled synthesis of graphene stripes embedded in hexagonal boron nitride opens up new possibilities for the construction of nanodevices with applications in sensing. Here, we explore properties related to electronic structure and quantum transport of a graphene nanoroad embedded in hexagonal boron nitride, using a combination of density functional theory and the non-equilibrium Green's functions method to calculate the electric conductance. We find that the graphene nanoribbon signature is preserved in the transmission spectra and that the local current is mainly con…
Devising ways of opening a band gap in graphene to make charge-carrier masses finite is essential for many applications. Recent experiments with graphene on hexagonal boron nitride (h-BN) offer tantalizing hints that the weak interaction with the substrate is sufficient to open a gap, in contradiction of earlier findings. Using many-body perturbation theory, we find that the small observed gap is what remains after a much larger underlying quasiparticle gap is suppressed by incommensurability. The sensitivity of this suppression to a small modulation of the distance separating graphene from th…
2D ferroelectrics with robust polarization down to atomic thicknesses provide novel building blocks for functional heterostructures. Experimental reports, however, remain scarce because of the requirement of a layered polar crystal. Here, we demonstrate a rational design approach to engineering 2D ferroelectrics from a non-ferroelectric parent compound via employing van der Waals assembly. Parallel-stacked bilayer boron nitride is shown to exhibit out-of-plane electric polarization that reverses depending on the stacking order. The polarization switching is probed via the resistance of an adja…
Group theory and density functional theory methods are combined to obtain compact and accurate $k\cdot p$ Hamiltonians that describe the bandstructures around the $K$ and $Γ$ points for the 2D material hexagonal boron arsenide (h-BAs) predicted to be an important low-bandgap material for electric, thermoelectric, and piezoelectric properties that supplements the well-studied 2D material hexagonal boron nitride. Hexagonal boron arsenide is a direct bandgap material with band extrema at the $K$ point. The bandgap becomes indirect with a conduction-band minimum at the $Γ$ point subject to a stron…
An ab initio calculations have been carried out for examining the curvature effect of small diameter hexagonal boron nanotubes. The considered conformations of boron nanotubes are namely armchair (3,3), zigzag (5,0) and chiral (4,2), and consist of 12, 20, and 56 atoms, respectively. The strain energy is evaluated in order to examine the curvature effect. It is found that the strain energy of hexagonal BNT strongly depends upon the radius, whereas the strain energy of triangular BNTs depends on both radius and chirality.
All local electronic properties of graphene on a hexagonal boron nitride (hBN) substrate exhibit spatial moiré patterns related to lattice constant and orientation differences between shared triangular Bravais lattices. We apply a previously derived effective Hamiltonian for the $π$-bands of graphene on h-BN to address the carrier-dependence of transport properties, concentrating on the conductivity features at four electrons and four holes per unit cell. These transport features measure the strength of Bragg scattering of $π$-electrons off the moiré pattern, and exhibit a striking particle-ho…
Optical reflectivity contrast provides a simple, fast and noninvasive method for characterization of few monolayer samples of two-dimensional materials. Here we apply this technique to measure the thickness of thin flakes of hexagonal Boron Nitride (hBN), which is a material of increasing interest in nanodevice fabrication. The optical contrast shows a strong negative peak at short wavelengths and zero contrast at a thickness dependent wavelength. The optical contrast varies linearly for 1-80 layers of hBN, which permits easy calibration of thickness. We demonstrate the applicability of this q…
Friction is one of the main sources of dissipation at liquid water/solid interfaces. Despite recent progress, a detailed understanding of water/solid friction in connection with the structure and energetics of the solid surface is lacking. Here we show for the first time that \textit{ab initio} molecular dynamics can be used to unravel the connection between the structure of nanoscale water and friction for liquid water in contact with graphene and with hexagonal boron nitride. We find that whilst the interface presents a very similar structure between the two sheets, the friction coefficient …
Using the minima hopping global geometry optimization method on the density functional potential energy surface we study medium size and large boron clusters. Even though for isolated medium size clusters the ground state is a cage like structure they are unstable against external perturbations such as contact with other clusters. The energy landscape of larger boron clusters is glass like and has a large number of structures which are lower in energy than the cages. This is in contrast to carbon and boron nitride systems which can be clearly identified as structure seekers in our minima hoppi…
The substrate material of monolayer graphene influences the charge carrier mobility by various mechanisms. At room temperature, the scattering of conduction electrons by phonon modes localized at the substrate surface can severely limit the charge carrier mobility. We here show that for substrates made of the piezoelectric hexagonal boron nitride (hBN), in comparison to the widely used SiO$_2$, this mechanism of remote phonon scattering is --at room temperature-- weaker by almost an order of magnitude, and causes a resistivity of approximately 3\,$Ω$. This makes hBN an excellent candidate mate…
We perform both lattice dynamics analysis and molecular dynamics simulations to demonstrate the existence of topologically protected phonon modes in a two-dimensional, monolayer hexagonal boron nitride sheet. The topological phonon modes are found to be localized at an in-plane interface that divides the system into two regions of distinct valley Chern numbers. The dispersion of this topological phonon mode crosses over the frequency gap [1123, 1278] cm^{-1}, which is opened through analogy with the quantum valley Hall effect by breaking inversion symmetry of the boron and nitride atoms in the…
Single-layer and bilayer carbon and hexagonal boron nitride nanoscrolls as well as nanoscrolls made of bilayer graphene/hexagonal boron nitride heterostructure are considered. Structures of stable states of the corresponding nanoscrolls prepared by rolling single-layer and bilayer rectangular nanoribbons are obtained based on the analytical model and numerical calculations. The lengths of nanoribbons for which stable and energetically favorable nanoscrolls are possible are determined. Barriers to rolling of single-layer and bilayer nanoribbons into nanoscrolls and barriers to nanoscroll unroll…
We determine the electronic structure of a graphene sheet on top of a lattice-matched hexagonal boron nitride (h-BN) substrate using ab initio density functional calculations. The most stable configuration has one carbon atom on top of a boron atom, the other centered above a BN ring. The resulting inequivalence of the two carbon sites leads to the opening of a gap of 53 meV at the Dirac points of graphene and to finite masses for the Dirac fermions. Alternative orientations of the graphene sheet on the BN substrate generate similar band gaps and masses. The band gap induced by the BN surface …
Chemical vapor deposited (CVD) graphene is often presented as a scalable solution to graphene device fabrication, but to date such graphene has exhibited lower mobility than that produced by exfoliation. Using a boron nitride underlayer, we achieve mobilities as high as 37,000 cm^2/Vs, an order of magnitude higher than commonly reported for CVD graphene and better than most exfoliated graphene. This result demonstrates that the barrier to scalable, high mobility CVD graphene is not the growth technique but rather the choice of a substrate that minimizes carrier scattering.
Van der Waals heterostructures formed by assembling different two-dimensional atomic crystals into stacks can lead to many new phenomena and device functionalities. In particular, graphene/boron-nitride heterostructures have emerged as a very promising system for band engineering of graphene. However, the intrinsic value and origin of the bandgap in such heterostructures remain unresolved. Here we report the observation of an intrinsic bandgap in epitaxial graphene/boron-nitride heterostructures with zero crystallographic alignment angle. Magneto-optical spectroscopy provides a direct probe of…
We have studied electrical transport as a function of carrier density, temperature and bias in multi-terminal devices consisting of hexagonal boron nitride (h-BN) encapsulated titanium trisulfide (TiS$_3$) sheets. Through the encapsulation with h-BN, we observe metallic behavior and high electron mobilities. Below $\sim$60 K an increase in the resistance, and non-linear transport with plateau-like features in the differential resistance are present, in line with the expected charge density wave (CDW) formation. Importantly, the critical temperature and the threshold field of the CDW phase can …
Periodically corrugated epitaxial graphene and hexagonal boron nitride (h-BN) on metallic substrates are considered as perspective templates for the self-assembly of nanoparticles arrays. By using first-principles calculations, we determine binding energies and diffusion activation barriers of metal adatoms on graphene and h-BN. The observed chemical trends can be understood in terms of the interplay between charge transfer and covalent bonding involving the adatom d electrons. We further investigate the electronic effects of the metallic substrate and find that periodically corrugated templat…
Hexagonal boron nitride is widely used as a substrate for two-dimensional materials in both electronic and photonic devices. Here, we demonstrate that two-dimensional hexagonal boron nitride is also an ideal substrate for one-dimensional single-walled carbon nanotubes. Nanotubes directly attached to hexagonal boron nitride show bright photoluminescence with narrow linewidth at room temperature, comparable to air-suspended nanotubes. Using photoluminescence excitation spectroscopy, we unambiguously assign the chiralities of nanotubes on boron nitride by tracking individual tubes before and afte…
We have studied boron nitride monolayer and bilayer band structures. For bilayers, the ground state energies of the different five stackings are computed using DFT in order to determine the most stable configuration. Also, the interlayer distance for the five different types of stacking in which boron-nitride bilayers can be found is determined. Using a minimal tight binding model for the band structures of boron nitride bilayers, the hopping parameters and the onsite energies have been extracted by fitting a tight binding empirical model to the DFT results.
Hexagonal boron nitride sheets have been noted especially for their enhanced properties as substrates for sp2 carbon-based nanodevices. To evaluate whether such enhanced properties would remain under various realistic conditions, we investigate the structural and electronic properties of semiconducting carbon nanotubes on perfect and defective hexagonal boron nitride sheets under an external electric field as well as with a metal impurity, using density functional theory. We verify that the use of a perfect hexagonal boron nitride sheet as a substrate indeed improves the device performances of…
We present electronic transport measurements of single- and bilayer graphene on commercially available hexagonal boron nitride. We extract mobilities as high as 125 000 cm^2/V/s at room temperature and 275 000 cm^2/V/s at 4.2 K. The excellent quality is supported by the early development of the nu = 1 quantum Hall plateau at a magnetic field of 5 T and temperature of 4.2 K. We also present a new and accurate transfer technique of graphene to hexagonal boron nitride crystals. This technique is simple, fast and yields atomically flat graphene on boron nitride which is almost completely free of b…
In fractionally filled Landau levels there is only a small energy difference between broken translational symmetry electron-crystal states and exotic correlated quantum fluid states. We show that the spatially periodic substrate interaction associated with the long period moiré patterns present in graphene on nearly aligned hexagonal boron nitride (hBN) tilts this close competition in favor of the former, explaining surprising recent experimental findings.
Van der Waals heterostructures of graphene and hexagonal boron nitride feature a moiré superlattice for graphene's Dirac electrons. Here, we review the effects generated by this superlattice, including a specific miniband structure featuring gaps and secondary Dirac points, and a fractal spectrum of magnetic minibands known as Hofstadter's butterfly.
The interlayer interaction in graphene/boron-nitride heterostructures is studied using density functional theory calculations with the correction for van der Waals interactions. It is shown that the use of the experimental interlayer distance allows to describe the potential energy surface at the level of more accurate but expensive computational methods. On the other hand, it is also demonstrated that the dependence of the interlayer interaction energy on the relative in-plane position of the layers can be fitted with high accuracy by a simple expression determined by the system symmetry. The…
Hexagonal boron nitride is an ideal dielectric to form two-dimensional heterostructures due to the fact that it can be exfoliated to be just few atoms thick and its a very low density of defects. By placing graphene nanoribbons on high quality hexagonal boron nitride it is possible to create ideal quasi one dimensional (1D) systems with very high mobility. The availability of high quality one-dimensional electronic systems is of great interest also given that when in proximity to a superconductor they can be effectively engineered to realize Majorana bound states. In this work we study how a b…
Bilayer graphene nanoribbon with zigzag edge is investigated with the tight binding model. Two stacking structures, alpha and beta, are considered. The band splitting is seen in the alpha structure, while the splitting in the wave number direction is found in the beta structure. The local density of states in the beta structure tend to avoid sites where interlayer hopping interactions are present. The calculation is extended to the boron-carbon-nitride systems. The qualitative properties persist when zigzag edge atoms are replaced with borons and nitrogens.
For a system of two spatially separated monoatomic graphene layers encapsulated in hexagonal boron nitride, we consider the drag effect between charge carriers in the Fermi liquid regime. Commonly, the phenomenon is described in terms of an interlayer Coulomb interaction. We show that if an additional electron - electron interaction via exchange of virtual substrate phonons is included in the model, the predicted drag resistivity is modified considerably at temperatures above 150 K. The anisotropic crystal structure of boron nitride, with strong intralayer and comparatively weak interlayer bon…
We present comprehensive optical studies of recently discovered single photon sources in boron nitride, which appear in form of narrow lines emitting centres. Here, we aim to compactly characterise their basic optical properties, including the demonstration of several novel findings, in order to inspire discussion about their origin and utility. Initial inspection reveals the presence of narrow emission lines in boron nitride powder and exfoliated flakes of hexagonal boron nitride deposited on Si/SiO2 substrates. Generally rather stable, the boron nitride emitters constitute a good quality vis…
Strongly anisotropic media where the principal components of the dielectric tensor have opposite signs are called hyperbolic. Such materials length exhibit unique nanophotonic properties enabled by the highly directional propagation of slow-light modes localized at deeply sub-diffractional scales. While artificial hyperbolic metamaterials have been demonstrated, they suffer from high plasmonic losses and require complex nanofabrication, which in turn induces the size-dependent limitations on optical confinement. The low-loss, mid-infrared, natural hyperbolic material, hexagonal boron nitride i…
We calculate the optical properties of atomic-sized core-shell graphene - boron nitride nanoflakes with triangular shaped crossection using the density functional theory. The optical properties can be tuned by using different sizes and proportions of the core-shell materials. Anisotropic effects manifested in the absorption of unpolarized light with different orientations of the optical vector are pointed out.
Graphene field-effect transistors are fabricated utilizing single-crystal hexagonal boron nitride (h-BN), an insulating isomorph of graphene, as the gate dielectric. The devices exhibit mobility values exceeding 10,000 cm2/V-sec and current saturation down to 500 nm channel lengths with intrinsic transconductance values above 400 mS/mm. The work demonstrates the favorable properties of using h-BN as a gate dielectric for graphene FETs.
We report on the fabrication and measurement of a graphene tunnel junction using hexagonal-boron nitride as a tunnel barrier between graphene and a metal gate. The tunneling behavior into graphene is altered by the interactions with phonons and the presence of disorder. We extract prop- erties of graphene and observe multiple phonon-enhanced tunneling thresholds. Finally, differences in the measured properties of two devices are used to shed light on mutually-contrasting previous results of scanning tunneling microscopy in graphene.
Optically addressable spins in materials are important platforms for quantum technologies, such as repeaters and sensors. Identification of such systems in two-dimensional (2d) layered materials offers advantages over their bulk counterparts, as their reduced dimensionality enables more feasible on-chip integration into devices. Here, we report optically detected magnetic resonance (ODMR) from previously identified carbon-related defects in 2d hexagonal boron nitride (hBN). We show that single-defect ODMR contrast can be as strong as 6% and displays a magnetic-field dependence with both positi…
We report on the fabrication and electrical characterization of both single layer graphene micron-sized devices and nanoribbons on a hexagonal boron nitride substrate. We show that the micron-sized devices have significantly higher mobility and lower disorder density compared to devices fabricated on silicon dioxide substrate in agreement with previous findings. The transport characteristics of the reactive-ion-etched graphene nanoribbons on hexagonal boron nitride, however, appear to be very similar to those of ribbons on a silicon dioxide substrate. We perform a detailed study in order to hi…
We study a superlattice of silicene and hexagonal boron nitride by first principles calculations and demonstrate that the interaction between the layers of the superlattice is very small. As a consequence, quasi free-standing silicene is realized in this superlattice. In particular, the Dirac cone of silicene is preserved, which has not been possible in any other system so far. Due to the wide band gap of hexagonal boron nitride, the superlattice realizes the characteristic physical phenomena of free-standing silicene. In particular, we address by model calculations the combined effect of the …
We report the fabrication details and low-temperature characteristics of the first carbon nanotube (CNT) quantum dots on flakes of hexagonal boron nitride (hBN) as substrate. We demonstrate that CNTs can be grown on hBN by standard chemical vapor deposition and that standard scanning electron microscopy imaging and lithography can be employed to fabricate nanoelectronic structures when using optimized parameters. This proof of concept paves the way to more complex devices on hBN, with more predictable and reproducible characteristics and electronic stability.
We demonstrate electrical spin injection from a ferromagnet to a bilayer graphene (BLG) through a monolayer (ML) of single-crystal hexagonal boron nitride (h-BN). A Ni81Fe19/ML h-BN/BLG/h-BN structure is fabricated using a micromechanical cleavage and dry transfer technique. The transport properties across the ML h-BN layer exhibit tunnel barrier characteristics. Spin injection into BLG has been detected through non local magnetoresistance measurements.
Previously, graphene nanoribbons set in lateral heterostructures with hexagonal boron nitride were predicted to support topologically protected states at low energy. We investigate how robust the transport properties of these states are against lattice disorder. We find that forms of disorder that do not couple the two valleys of the zigzag graphene nanoribbon do not impact the transport properties at low bias, indicating that these lateral heterostructures are very promising candidates for chip-scale conducting interconnects. Forms of disorder that do couple the two valleys, such as vacancies…
