Doping mobile carriers into ordinary semiconductors such as Si, GaAs, and ZnO was the enabling step in the electronic and optoelectronic revolutions. The recent emergence of a class of "Quantum Materials", where uniquely quantum interactions between the components produce specific behaviors such as topological insulation, unusual magnetism, superconductivity, spin-orbit-induced and magnetically-induced spin splitting, polaron formation, and transparency of electrical conductors, pointed attention to a range of doping-related phenomena associated with chemical classes that differ from the traditional semiconductors. These include wide-gap oxides, compounds containing open-shell d electrons, and compounds made of heavy elements yet having significant band gaps. The atomistic electronic structure theory of doping that has been developed over the past two decades in the sub-field of semiconductor physics has recently been extended and applied to quantum materials. The present review focuses on explaining the main concepts needed for a basic understanding of the doping phenomenology and indeed peculiarities in quantum materials from the perspective of condensed matter theory, with the hope of forging bridges to the chemists that have enabled the synthesis of some of the most interesting compounds in this field.
Bipolar carrier transport is often a limiting factor in the thermoelectric efficiency of narrow bandgap materials at high temperatures due to the reduction in the Seebeck coefficient and the introduction of an additional term to the thermal conductivity. Using the Boltzmann transport formalism and a two-band model, we simulate transport through bipolar systems and calculate their thermoelectric transport properties: the electrical conductivity, the Seebeck coefficient and the thermoelectric power factor. We present an investigation into the doping optimisation of such materials, showing the de…
Historically, the discovery and optimization of doped bulk materials has been predominantly developed through an Edisonian approach. While successful and despite the constant progress in fundamental understanding of detector materials physics, the process has been restricted by its inherent slow pace and low success rate. This poor throughput owes largely to the considerable compositional space that needs to be accounted for to fully comprehend complex material/performance relationship. Here, we present a combinatorial approach where doped bulk scintillator materials can be rapidly optimized f…
Ordinary doping by electrons (holes) generally means that the Fermi level shifts towards the conduction band (valence band) and that the conductivity of free carriers increases. Recently, however, some peculiar doping characteristics were sporadically recorded in different materials without noting the mechanism: electron doping was observed to cause a portion of the lowest unoccupied band to merge into the valance band, leading to a decrease in conductivity. This behavior we dub as 'anti-doping' was seen in rare-earth nickel oxides SmNiO3, cobalt oxides SrCoO2.5, Li-ion battery materials and e…
This chapter illustrates the use of defect physics as a conceptual and theoretical framework for understanding and designing battery materials. It starts with a methodology for first-principles studies of defects in complex transition-metal oxides. The chapter then considers defects that are activated in a cathode material during synthesis, during measurements, and during battery use. Through these cases, it discusses possible defect landscapes in the material and their implications, guidelines for materials design via defect-controlled synthesis, mechanisms for electronic and ionic conduction…
Recently the discovery of magnetic order in two-dimensional monolayer chromium trihalides opens the new research field in two-dimensional materials. We use first-principles calculations to systematically examine the doping effect of chalcogen on CrBr3. In the case of S-doping, four stable configurations, Cr2Br5S, Cr2Br4S2-A, Cr2Br4S2-B and Cr2Br3S3-A, are predicted to be ferromagnetic semiconductors. It is found that the new bands appearing in the original bandgap are made up of S-p and Cr-d-egorbits, lead to the obvious reduce of bandgap and the enhanced optical absorption in the visible rang…
The n-type tensile-strained Ge can be used as high-efficient light-emitting materials. To reveal the influence of n-type doping on the electronic structure of Ge, we have computed the electronic structure of P, As and Sb doped Ge using first-principles calculation and band unfolding technique. We find that these n-type doping can induce both indirect and direct band gap narrowing, which well reproduce experimental observation that red-shifts occur in photoluminescence spectra of Ge with n-type doping. We reveal that the indirect band gap narrowing is mainly caused by impurity state, while the …
The electronic structure and the physical properties of quantum materials can be significantly altered by charge carrier doping and magnetic state transition. Here we report a discovery of a giant and reversible electronic structure evolution with doping in a magnetic topological material. By performing high-resolution angle-resolved photoemission measurements on EuCd2As2,we found that a huge amount of hole doping can be introduced into the sample surface due to surface absorption. The electronic structure exhibits a dramatic change with the hole doping which can not be described by a rigid ba…
We investigate the effect of lattice disorder and local correlation effects in finite and periodic silicene structures caused by carbon doping using first-principles calculations. For both finite and periodic silicene structures, the electronic properties carbon-doped monolayers are dramatically changed by controlling the doping sites in the structures, which is related to the amount of disorder introduced in the lattice and electron-electron correlation effects. By changing the position of the carbon dopants, we found that a Mott-Anderson transition is achieved. Moreover, the band gap is dete…
The atomic thickness of two-dimensional (2D) materials provides a unique opportunity to control material properties and engineer new functionalities by electrostatic doping. Electrostatic doping has been demonstrated to tune the electrical and optical properties of 2D materials in a wide range, as well as to drive the electronic phase transitions. The recent discovery of atomically thin magnetic insulators has opened up the prospect of electrical control of magnetism and new devices with unprecedented performance. Here we demonstrate control of the magnetic properties of monolayer and bilayer …
To obtain high-performance spintronic devices with high integration density, two-dimensional (2D) half-metallic materials are eagerly pursued all along. Here, we propose a stable 2D material with a honeycomb-kagome lattice, i.e., the Mg3C2 monolayer, based on first-principles calculations. This monolayer is an anti-ferromagnetic (AFM) semiconductor at its ground state. We further demonstrate that a transition from AFM semiconductor to ferromagnetic half-metal in this 2D material can be induced by carrier (electron or hole) doping. This magnetic transition can be understood by the Stoner criter…
Surface doping of ZnO allows for tailoring the surface chemistry of the material while preserving the superb electronic structure of the bulk. Apart from obvious changes in adsorption energies and activation energies for catalysis, surface doping can alter the workfunction of the material and allow it to be tuned for specific photocatalytic and optoelectronic applications. We present first-principles electronic structure calculations for surface doping of Mn on the ZnO (0001) surface. Various dopant concentrations have been considered at the out-most (surface) layer of Zn atoms, while the inte…
The doping of semiconductor materials is a fundamental part of modern technology, but the classical approaches have in many cases reached their limits both in regard to achievable charge carrier density, as well as mobility. Modulation doping, a mechanism that exploits the energy band alignment at an interface between two materials to induce free charge carriers in one of them, has been shown to circumvent the mobility restriction. Due to an alignment of doping limits by intrinsic defects, however, the carrier density limit cannot be lifted using this approach. Here we present a novel doping s…
Doping lithium-ion battery electrode materials LiMO$_2$ (M = Co, Ni, Mn) with impurities has been shown to be an effective way to optimize their electrochemical properties. Here, we report a detailed first-principles study of layered oxides LiCoO$_2$, LiNiO$_2$, and LiMnO$_2$ lightly doped with transition-metal (Fe, Co, Ni, Mn) and non-transition-metal (Mg, Al) impurities using hybrid-density-functional defect calculations. We find that the lattice site preference is dependent on both the dopant's charge and spin states, which are coupled strongly to the local lattice environment and can be af…
We report a detailed first-principles study of doping in Li$_2$MnO$_3$, in both the dilute doping limit and heavy doping, using hybrid density-functional calculations. We find that Al, Fe, Mo, and Ru impurities are energetically most favorable when incorporated into Li$_2$MnO$_3$ at the Mn site, whereas Mg is most favorable when doped at the Li sites. Ni, on the other hand, can be incorporated at the Li site and/or the Mn site, and the distribution of Ni over the lattice sites can be tuned by tuning the materials preparation conditions. There is a strong interplay between the lattice site pref…
Doping is an effective way to modify the electronic property of two-dimensional (2D) materials and endow them with new functionalities. However, wide-range control of the substitutional doping concentration with large scale uniformity remains challenging in 2D materials. Here we report in-situ chemical vapor deposition growth of vanadium (V) doped monolayer molybdenum disulfide (MoS2) with widely tunable doping concentrations ranging from 0.3 to 13.1 at%. The key to regulate the doping concentration lies in the use of appropriate V precursors with different doping abilities, which also generat…
How to electrically control magnetic properties of a magnetic material is promising towards spintronic applications, where the investigation of carrier doping effects on antiferromagnetic (AFM) materials remains challenging due to their zero net magnetization. In this work, we found electron doping dependent variation of magnetic orders of a two-dimensional (2D) AFM insulator NiPS3, where doping concentration is tuned by intercalating various organic cations into the van der Waals gaps of NiPS3 without introduction of defects and impurity phases. The doped NiPS3 shows an AFM-ferrimagnetic (FIM…
Lithium niobate, LiNbO3, is an important technological material with good electro-optic, acousto-optic, elasto-optic, piezoelectric and nonlinear properties. Doping LiNbO3 with hafnium, Hf has been shown to improve the resistance of the material to optical damage. Computer modelling provides a useful means of determining the properties of doped and undoped LiNbO3, including its defect chemistry, and the effect of doping on the structure. In this paper, Hf doped LiNbO3 has been modelled, and the final defect configurations are found to be consistent with experimental results.
Graphene and carbon nanotubes have extraordinary mechanical and electronic properties. Intrinsic line defects such as local non-hexagonal reconstructions or grain boundaries, however, significantly reduce the tensile strength, but feature exciting electronic properties. Here, we address the properties of line defects in graphene from first-principles on the level of full-potential density-functional theory, and assess doping as one strategy to strengthen such materials. We carefully disentangle the global and local effect of doping by comparing results from the virtual crystal approximation wi…
Two-dimensional (2D) ferromagnetic materials are considered as promising candidates for the future generations of spintronic devices. Yet, 2D materials with intrinsic ferromagnetism are scarce. High-throughput first-principles simulations are performed in order to screen 2D materials that present a non-magnetic to a ferromagnetic transition upon hole doping. A global evolutionary search is subsequently performed, in order to identify alternative possible atomic structures of the eligible candidates, and 122 materials exhibiting a hole-doping induced ferromagnetism are identified. Their energet…
Effect of Pb doping on the crystallization process and thermoelectric properties of Ge2Sb2Te5 phase change material
A.B. Nalbandyan Institute of Chemical Physics NAS RA（纳尔班扬化学物理研究所）；Belgorod State University（别尔哥罗德国立大学）；Institute of Radiophysics and Electronics NAS RA（无线电物理与电子研究所）
The Mott transistor is a paradigm for a new class of electronic devices---often referred to by the term Mottronics---, which are based on charge correlations between the electrons. Since correlation-induced insulating phases of most oxide compounds are usually very robust, new methods have to be developed to push such materials right to the boundary to the metallic phase in order to enable the metal-insulator transition to be switched by electric gating. Here we demonstrate that thin films of the prototypical Mott insulator LaTiO$_3$ grown by pulsed laser deposition under oxygen atmosphere are…
Polar metals characterized by the simultaneous coexistence of ferroelectric distortions and metallicity have attracted tremendous attention. Developing such materials at low dimensions remains challenging since both conducting electrons and reduced dimensions are supposed to quench ferroelectricity. Here, based on first-principles calculations, we report the discovery of ferroelectric behavior in two-dimensional (2D) metallic materials with electrostatic doping, even though ferroelectricity is unconventional at the atomic scale. We reveal that PbTe monolayer is intrinsic ferroelectrics with pr…
It is common to measure a single sample using multiple different microscopy methods that have variable scales, rotation and translation. Registering hyperspectral images of two dimensional materials is particularly difficult due to the lack of keypoints on unprepared substrates. Identifying variations in the strain of these samples can assist in the registration of these samples by creating keypoints to correlate images. Registration of these images allow for multimodal analysis from these various instruments by aligning multiple images into a single coordinate space. This is done by Hough tra…
Graphene is known as the strongest 2D material in nature, yet we show that moderate charge doping of either electrons or holes can further enhance its ideal strength by up to ~17%, based on first principles calculations. This unusual electronic enhancement, versus conventional structural enhancement, of material's strength is achieved by an intriguing physical mechanism of charge doping counteracting on strain induced enhancement of Kohn anomaly, which leads to an overall stiffening of zone boundary K1 phonon mode whose softening under strain is responsible for graphene failure. Electrons and …
The recent discovery of high thermoelectric performance in Mg$_3$Sb$_2$ has been critically enabled by the success in $n$-type doping of this material, which is achieved under Mg-rich growth conditions, typically with chalcogens (Se, Te) as extrinsic dopants. Using first-principles defect calculations, we previously predicted that higher electron concentrations ($\sim10^{20}$ cm$^{-3}$) can be achieved in Mg$_3$Sb$_2$ by doping with La instead of Se or Te. Subsequent experiments showed that free electron concentration in La-doped Mg$_3$Sb$_{2-x}$Bi$_x$ indeed exceeds those in the Te-doped mate…
It is well known that the efficiency of a good thermoelectric material should be optimized with respect to doping concentration. However, much less attention has been paid to the optimization of the dopant's energy level. Thermoelectric materials doped with shallow levels may experience a dramatic reduction in their figures of merit at high temperatures due to the excitation of minority carriers that reduces the Seebeck coefficient and increases bipolar heat conduction. Doping with deep level impurities can delay the excitation of minority carriers as it requires a higher temperature to ionize…
Stanene is a quantum spin hall insulator and a promising material for electronic and optoelectronic devices. Density functional theory (DFT) calculations are performed to study the band gap opening in stanene by elemental mono- (B, N) and co-doping (B-N). Different patterned B-N co-doping is studied to change the electronic properties in stanene. A patterned B-N co-doping opens the band gap in stanene and the semiconducting nature persists with strain. Molecular dynamics (MD) simulations are performed to confirm the thermal stability of such doped system. The stress-strain study indicates that…
Supercapacitors have recently gained popularity as possible energy storage systems due to their high cycling ability and increased power density. However, one of the major drawbacks of supercapacitors is that they have a low energy density, which makes them less effective than batteries. Herein, we explore different methods of increasing the supercapacitor performance of the perovskite SrCoO3. We carry out first-principles calculations to systematically study how SrCoO3/graphene interface, oxygen vacancies, and doping improve the performance of strontium cobaltite as an anion-intercalation-typ…
High-speed electrical switching of Ge2Sb2Te5 (GST) remains a challenging task due to the large impedance mismatch between the low-conductivity amorphous state and the high-conductivity crystalline state. In this letter, we demonstrate an effective doping scheme using nickel to reduce the resistivity contrast between the amorphous and crystalline states by nearly three orders of magnitude. Most importantly, our results show that doping produces the desired electrical performance without adversely affecting the film's optical properties. The nickel doping level is approximately 2% and the lattic…
In this study, the effect of Sr- and Ni-doping on microstructural, morphological and sensing properties of ZnO nanorods has been investigated. Nanorods with different Sr and Ni loadings were prepared using a simple wet chemical method and characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD) and photoluminescence (PL) analysis. XRD data confirmed that Sr- and Ni-doped samples maintainsthe wurtzite hexagonal structure of pure ZnO. However, unlikes Sr, Ni doping modifies the nanorod morphology, increases the surface area (SA) and decreases the ratio of IUV/Igreen …
Oxide materials offer a wide range of interesting physical and chemical properties. Even more versatile behavior of oxides is seen at the nanoscale, qualifying these materials for a number of applications. In this study we used DFT calculations to investigate the physical and chemical properties of small hexagonal MgO nanotubes of different length. We analyzed the effect of Li, B, C, N, and F doping on the properties of the nanotubes. We find that all dopants favor the edge positions when, incorporated into the nanotubes. Doping results in the net magnetization whose value depends on the type …
Metal-intercalated iron selenides are a class of superconductors that have received much attention but are less understood in comparison with their FeAs-based counterparts. Here, the controversial issues such as Fe vacancy, the real phase responsible for superconductivity, and lattice stability have been addressed based on first-principles calculations. New insights into the distinct features in terms of carrier doping have been revealed.
Due to its unique physical and chemical properties, graphene is being considered as a promising material for energy conversion and storage applications. Introduction of functional groups and dopants on/in graphene is a useful strategy for tuning its properties. In order to fully exploit its potential, atomic-level understanding of its interaction with species of importance for such applications is required. We present a DFT study of the interaction of sodium atoms with epoxy-graphene and analyze how this interaction is affected upon doping with boron and nitrogen. We demonstrate how the dopant…
While doping is widely used for tuning physical properties of perovskites in experiments, it remains a challenge to exactly know how doping achieves the desired effects. Here, we propose an empirical and computationally tractable model to understand the effects of doping with Fe-doped BaTiO$_{3}$ as an example. This model assumes that the lattice sites occupied by Fe ion and its nearest six neighbors lose their ability to polarize, giving rise to a small cluster of defective dipoles. Employing this model in Monte-Carlo simulations, many important features like reduced polarization and the conv…
Bi$_2$Se$_3$, a layered three dimensional (3D) material, exhibits topological insulating properties due to presence of surface states and a band gap of 0.3 eV in the bulk. We study the effect hydrostatic pressure $P$ and doping with rare earth elements on the topological aspect of this material in bulk from a first principles perspective. Our study shows that under a moderate pressure of P$>$7.9 GPa, the bulk electronic properties show a transition from an insulating to a Weyl semi-metal state due to band inversion. This electronic topological transition may be correlated to a structural chang…
Density functional theory based First Principles calculations were used to study the effect of Silicon (Si) doping on the structural, electronic and optical properties of CsCaI3. From our calculations, we predict that CsCaI3 can form stable perovskite structure. It is also observed that after substitutional doping of Si in CsCaI3, the material still can stay in perovskite form. Band structure studies showed that with Si doping, the band gap can be varied from 4.76eV for un-doped CsCaI3 to 0.639eV for 75 percent Si doped CsCaI3. The optical absorption spectra of the materials showed that Si dop…
Various types of magnetism can appear in emerging quantum materials such as van der Waals layered ones. Here, we report the successful doping of manganese atoms into a post-transition metal dichalcogenide semiconductor: SnSe$_2$. We synthesized a single crystal Sn$_{1-x}$Mn$_x$Se$_{2}$ with $\textit{x}$ = 0.04 by the chemical vapor transport (CVT) method and characterized it by x-ray diffraction (XRD) and energy-dispersive x-ray spectroscopy (EDS). The magnetic properties indicated a competition between coexisting ferromagnetic and antiferromagnetic interactions, from the temperature dependenc…
Selenium direct doping obtained high-performance-n-type Bi2Te3-based thermoelectric materials with a wide temperature range
Advanced Ceramics Research Center, School of Materials Science and Engineering, Anhui University of Technology（安徽工业大学材料科学与工程学院先进陶瓷研究中心）；Institute of Energy, Hefei Comprehensive National Science Center (Anhui Energy Laboratory)（合肥综合性国家科学中心能源研究院（安徽能源实验室））；School of Chemistry and Materials Science, University of Science and Technology of China（中国科学技术大学化学与材料科学学院）
通过高温熔炼结合退火工艺制备 n 型 Bi2Te3 基热电材料，研究硒掺杂量和退火对载流子浓度、双极效应抑制及热电性能的影响，为相关研究提供参考。
(Ga,Mn)As is at the forefront of research exploring the synergy of magnetism with the physics and technology of semiconductors, and has led to discoveries of new spin-dependent phenomena and functionalities applicable to a wide range of material systems. Its recognition and utility as an ideal model material for spintronics research has been undermined by the large scatter in reported semiconducting doping trends and micromagnetic parameters. In this paper we establish these basic material characteristics by individually optimizing the highly non-equilibrium synthesis for each Mn-doping level …
Black phosphorus (BP) has recently attracted significant interest due to its unique electronic and optical properties. Doping is an effective strategy to tune a material's electronic structures, however, the direct and controllable growth of BP with a high yield and its doping remain a great challenge. Here we report an efficient short-distance transport (SDT) growth approach and achieve the controlled growth of high quality BP with the highest yield so far, where 98% of the red phosphorus is converted to BP. The doping of BP by As, Sb, Bi, Se and Te are also achieved by this SDT growth approa…
N-type Bi100-xSbx alloys have the highest thermoelectric figure of merit (zT) of all materials below 200K; here we investigate how filling multiple valence band pockets at T and H-points of the Brillouin zone produces high zT in p-type Sn-doped material. This approach, theoretically predicted to potentially give zT>1 in Bi, was used successfully in PbTe. We report thermopower, electrical and thermal conductivity (2 to 400K) of single crystals with 12<x<37 and polycrystals (x=50-90), higher Sb concentrations than previous studies. We obtain a 60% improvement in zT to 0.13.
In this paper, we report on electrical transport in F4TCNQ doped organic semiconductor (host) materials. By monitoring the conductance of the sample in-situ during and after deposition, we show that sequential deposition of F4TCNQ and host semiconductor results in bulk doping of the semiconductor. In addition, the doping density (and conductivity) of the host can be easily controlled by adjusting the thickness of the bottom F4TCNQ layer. This alternative scheme for doping is simpler than the conventional way of doping small molecules which involves simultaneous co-evaporation of host and dopan…
Low-resistivity metal-semiconductor (M-S) contact is one of the urgent challenges in the research of 2D transition metal dichalcogenides (TMDs). Here, we report a chloride molecular doping technique which greatly reduces the contact resistance (Rc) in the few-layer WS2 and MoS2. After doping, the Rc of WS2 and MoS2 have been decreased to 0.7 kohm*um and 0.5 kohm*um, respectively. The significant reduction of the Rc is attributed to the achieved high electron doping density thus significant reduction of Schottky barrier width. As a proof-ofconcept, high-performance few-layer WS2 field-effect tr…
In metal/degenerately doped silicon bilayer structure, the interfacial flexoelectric effect due to strain gradient leads to charge carrier transfer from metal layer to the silicon layer. This excess charge carrier concentration is called flexoelectronic doping or flexoelectronic charge transfer, which gives rise to an electronically polarized (order of magnitude larger than ferroelectric materials) silicon layer. In the transport measurements, the charge carrier concentration in silicon is found to increase by two orders of magnitude due to flexoelectronic doping, which changes the Fermi level…
Nitrogen doped graphene and carbon nanotubes are popularly in focus as metal-free electro-catalysts for oxygen reduction reactions (ORR) central to fuel-cells. N doped CNTs have been also reported to chemisorb mutually, promising a route to their robust pre-determined assembly into devices and mechanical reinforcements. We propose from first-principles a common mechanistic understanding of these two aspects pointing further to a generic chemical activation of carbon atoms due to substitution by nitrogen in experimentally observed configurations. Wannier-function based orbital resolved study of…
We report a combined theoretical and experimental search for thermoelectric materials based on semiconducting zinc antimony. Influence of three new doping elements (sodium, potassium and boron) on the electronic properties is investigated as well as the carrier concentration and temperature dependence of the thermoelectric coefficients obtained through density-functional calculations and Boltzmann transport theory. Distortion of the electron arrangement caused by the doping elements is displayed as a deformation charge density around the atoms. Based on the band structures, the density of stat…
Single dopings of Mn and Fe in Si are investigated using 8-, 64-, and 216-atom supercells and a first-principles method based on density functional theory. Between the two transition metal elements (TMEs), atom sizes play an essential role in determining the contraction or the expansion of neighboring atoms around the TME dopant at a substitutional site. At a tetrahedral interstitial site, there is only expansion. Magnetic moments/TME at the two sites are calculated. Physical origins for these inter-related properties are discussed. A few suggestions about the growth of these Si-based alloys a…
Van der Waals single-layer materials are characterized by an inherent extremely low bending rigidity and therefore are prone to nanoscale structural modifications due to substrate interactions. Such interactions can induce excess charge concentration, conformational ripples and residual mechanical strain. In this work, we employed spatially resolved Raman and Photoluminescence images to investigate strain and doping inhomogeneities in a single layer exfoliated Molybdenum disulphide crystal. We have found that correlations between the spectral parameters of the most prominent Raman bands A1' an…
Two-dimensional (2D) materials with robust magnetism have drawn immense attention for their promising applications in spintronics. Recently, intrinsic ferromagnetic vanadium triiodide (VI3) has been synthesized experimentally. To enhance its spintronic property, we modified VI3 by interstitial doping with 3d transition metals (TM) and used first-principles calculations to investigate the geometric structure, formation energy, electronic property, and magnetism of pristine VI3 and 3d TM-doped VI3 monolayer. Among eight transition metal (Sc-, Ti-, V-, Cr-, Mn-, Fe-, Co-, and Ni-) doped VI3 mater…
