We perform unsteady three-dimensional direct numerical simulations to study the aerodynamic characteristics of finite-aspect-ratio swept wings with a NACA 0015 cross-section at a chord-based Reynolds number of 400. The effects of the sweep angle ($Λ=0^{\circ}-45^{\circ}$) on the aerodynamic force coefficients are examined for finite-aspect-ratio wings ($sAR=0.5$, 1, and 2) over a wide range of angles of attack ($α=0^{\circ}-30^{\circ}$). The unsteady laminar separated flows exhibit complex aerodynamic characteristics with respect to these parameters. The introduction of sweep enhances lift for wings with low aspect ratios of $sAR=0.5$ and 1, due to the lift generated by the vortical structures near the midspan. For these cases, the dependence of drag coefficients on the sweep angle is less noticeable, particularly at lower angles of attack. The lift-to-drag ratios for low-aspect-ratio wings increase with the sweep angle. However, such favorable effects of sweep angle on the lift coefficients and lift-to-drag ratios are not observed for wings with higher aspect ratios, where the midspan effects are relatively weaker over the wing span. The results herein provide a laminar aerodynamic characterization of the low-aspect-ratio wings and complement the unsteady low-Reynolds-number aerodynamic database with highlight on the effect of sweep.
Forward-swept wings offer unique advantages in the aerodynamic performance of air vehicles. However, the low-Reynolds-number characteristics of such wings have not been explored in the past. In this work, we numerically study laminar separated flows over forward-swept wings with semi aspect ratios $sAR=0.5$ to 2 at a chord-based Reynolds number of 400. Forward-swept wings generate wakes that are significantly different from those of backward-swept wings. For low-aspect-ratio forward wings, the wakes remain steady due to the strong downwash effects induced by the tip vortices. For larger aspect…
Through triglobal resolvent analysis, we reveal the effects of wing tip and sweep angle on laminar separated wakes over swept wings. For the present study, we consider wings with semi-aspect ratios from $1$ to $4$, sweep angles from $0^\circ$ to $45^\circ$, and angles of attack of $20^\circ$ and $30^\circ$ at a chord-based Reynolds number of $400$ and a Mach number of $0.1$. Using direct numerical simulations, we observe that unswept wings develop vortex shedding near the wing root with a quasi-steady tip vortex. For swept wings, vortex shedding is seen near the wing tip for low sweep angles, …
In this paper I present the aerodynamic optimization of the angle of attack of MQ-9 Reaper wings under turbulent airflow conditions. The background discusses the evolution of UAVs such as the Hunter and their usages for different tasks, specifically within the last decade. The main procedural stage consists of creating a criterion for choosing the most aerodynamic wing design by considering certain aerodynamic properties and analyzing the lift and drag coefficients using computer software. At the end of the paper, the final optimized MQ-9 wing design, along with its respective design parameter…
The large active wing deformation is a significant way to generate high aerodynamic forces required in bat flapping flight. Besides the twisting, the elementary morphing models of a bat wing are proposed, such as wing-bending in the spanwise direction, wing-cambering in the chordwise direction, and wing area-changing. A plate of aspect ratio 3 is used to model a bat wing and a three dimensional unsteady panel method is applied to predict the aerodynamic forces. It is found that the cambering model has a great positive influence on the lift, followed by area-changing model and then the bending …
We perform direct numerical simulations of laminar separated flows over finite-aspect-ratio swept wings at a chord-base Reynolds number of $Re = 400$ to reveal a variety of wake structures generated for a range of aspect ratios ($sAR=0.5-4$), angles of attack ($α=16^{\circ}-30^{\circ}$), and sweep angles ($Λ=0^{\circ}-45^{\circ}$). Flows behind swept wings exhibit increased complexity in their dynamical features compared to unswept-wing wakes. For unswept wings, the wake dynamics are predominantly influenced by the tip effects. Steady wakes are mainly limited to low-aspect-ratio wings. Unstead…
While dragonflies are highly agile flyers, some key aerodynamic mechanisms responsible for their flight performance remain inadequately understood. Based on forward flight conditions, we investigate dragonfliess spanwise aerodynamic behaviors associated with flapping wings phasing relationship. Overall, the leading edge vortex (LEV) on the forewing forms without the influence of the hindwing. For hindwing, the wing root region prominently displays a trailing edge vortex (TEV). In the inner span region, the vortical flow structures around the hindwing is influenced by the forewings LEV when bot…
A preliminary numerical study on the aerodynamics of a kite wing for high altitude wind power generators is proposed. Tethered kites are a key element of an innovative wind energy technology, which aims to capture energy from the wind at higher altitudes than conventional wind towers. We present the results obtained from three-dimensional finite volume numerical simulations of the steady air flow past a three-dimensional curved rectangular kite wing (aspect ratio equal to 3.2, Reynolds number equal to 3x10^6). Two angles of incidence -- a standard incidence for the flight of a tethered airfoil…
Linear modal instabilities of flow over finite-span untapered wings have been investigated numerically at Reynolds number 400, at a range of angles of attack and sweep on two wings having aspect ratios 4 and 8. Base flows have been generated by direct numerical simulation, marching the unsteady incompressible three-dimensional Navier-Stokes equations to a steady state, or using selective frequency damping to obtain stationary linearly unstable flows. Unstable three-dimensional linear global modes of swept wings have been identified for the first time using spectral-element time-stepping solver…
Wing flexibility plays an essential role in the aerodynamic performance of insects due to the considerable deformation of their wings during flight under the impact of inertial and aerodynamic forces. These forces come from the complex wing kinematics of insects. In this study, both wing structural dynamics and flapping wing motion are taken into account to investigate the effect of wing deformation on the aerodynamic efficiency of a bumblebee in tethered flight. A fluid-structure interaction solver, coupling a mass-spring model for the flexible wing with a pseudo-spectral code solving the inc…
Passive aerodynamic robustness reduces disturbance amplification in flight
J. C. Wu Center for Aerodynamics, School of Aeronautics and Astronautics, Shanghai Jiao Tong University（上海交通大学航空航天学院空气动力学中心）；Commercial Aircraft Corporation of China, Ltd.（中国商用飞机有限责任公司）
Two configurations typical of fixed-wing aircraft are simulated with the actuator line method (ALM): a wing with winglets and a T-tail. The ALM is extensively used in rotor simulations to model the blades by body forces, which are calculated from airfoil data and the relative flow velocity. This method has not been used to simulate airplane aerodynamics, despite its advantage of allowing coarser grids. This may be credited to the failure of the uncorrected ALM to accurately predict forces near the tip of wings, even for simple configurations. The recently-proposed vortex-based smearing correct…
We study analytically the dynamic response of membrane aerofoils subject to arbitrary, small-amplitude chord motions and transverse gusts in a two-dimensional inviscid incompressible flow. The theoretical model assumes linear deformations of an extensible membrane under constant tension, which are coupled aeroelastically to external aerodynamic loads using unsteady thin aerofoil theory. The structural and aerodynamic membrane responses are investigated for harmonic heave oscillations, an instantaneous change in angle of attack, sinusoidal transverse gusts, and a sharp-edged gust. The unsteady …
Biological flapping wing fliers operate efficiently and robustly in a wide range of flight conditions and are a great source of inspiration to engineers. The unsteady aerodynamics of flapping-wings are dominated by large-scale vortical structures that augment the aerodynamic performance but are sensitive to minor changes in the wing actuation. We experimentally optimise the pitch angle kinematics of a flapping wing system in hover to maximise the stroke average lift and hovering efficiency using a evolutionary algorithm and in-situ force and torque measurements at the wing root. Additional flo…
Wing flapping is one of the most widespread propulsion methods found in nature; however, the current understanding of the aerodynamics in bird wakes is incomplete. The role of the unsteady motion in the flow and its contribution to the aerodynamics is still an open question. In the current study, the wake of a freely flying European starling has been investigated using long-duration high-speed Particle Image Velocimetry (PIV) in the near wake. Kinematic analysis of the wings and body of the bird has been performed using additional high-speed cameras that recorded the bird movement simultaneous…
We report direct numerical simulations of a pair of wings in horizontal tandem configuration, to analyze the effect of their aspect ratio on the flow and the aerodynamic performance of the system. The wings are immersed in a uniform free-stream at Reynolds number Re = 1000, and they undergo heaving and pitching oscillation with Strouhal number St = 0.7. The aspect ratios of forewing and hindwing vary between 2 and 4. The aerodynamic performance of the system is dictated by the interaction between the trailing edge vortex (TEV) shed by the forewing and the induced leading edge vortex formed on …
Aerodynamic ground effect in flapping-wing insect flight is of importance to comparative morphologies and of interest to the micro-air-vehicle (MAV) community. Recent studies, however, show apparently contradictory results of either some significant extra lift or power savings, or zero ground effect. Here we present a numerical study of fruitfly sized insect takeoff with a specific focus on the significance of leg thrust and wing kinematics. Flapping-wing takeoff is studied using numerical modelling and high performance computing. The aerodynamic forces are calculated using a three-dimensional…
In the present work, we investigate dynamic interaction and response of flexible bio-inspired morphing wing structure to a low Reynolds aerodynamic load. The aspects of inspiration are as follows. First, the segmentation of the wing into rigid and flexible segments. Considering a leading edge constitution of bone and muscle. In addition to a flexible trailing edge composed of feathers. Second, the material properties provided by experimental biology in literature are adopted such as the bending stiffness and Young's modulus. The development of numerical models allowing non uniform distribution…
Tiny flying insects of body lengths under 2 mm use the `clap-and-fling' mechanism with bristled wings for lift augmentation and drag reduction at chord-based Reynolds number ($Re$) on $\mathcal{O}$(10). We examine wing-wing interaction of bristled wings in fling at $Re$=10, as a function of initial inter-wing spacing ($δ$) and degree of overlap between rotation and linear translation. A dynamically scaled robotic platform was used to drive physical models of bristled wing pairs with the following kinematics (all angles relative to vertical): 1) rotation about the trailing edge to angle $θ_\tex…
The wind-tunnel experiment plays a critical role in the design and development phases of modern aircraft, which is limited by prohibitive cost. In contrast, numerical simulation, as an important alternative paradigm, mimics complex flow behaviors but is less accurate compared to experiment. This leads to the recent development and emerging interest in applying data fusion for aerodynamic prediction. In particular, the accurate prediction of aerodynamic with lower computational cost can be achieved by fusing experimental (high-fidelity) and computational (low-fidelity) aerodynamic data. Current…
Flying animals resort to fast, large-degree-of-freedom motion of flapping wings, a key feature that distinguishes them from rotary or fixed-winged robotic fliers with limited motion of aerodynamic surfaces. However, flapping-wing aerodynamics are characterised by highly unsteady and three-dimensional flows difficult to model or control, and accurate aerodynamic force predictions often rely on expensive computational or experimental methods. Here, we developed a computationally efficient and data-driven state-space model to dynamically map wing kinematics to aerodynamic forces/moments. This mod…
SuperWing: a comprehensive transonic wing dataset for data-driven aerodynamic design
School of Aerospace Engineering, Tsinghua University, Beijing, China（清华大学北京航空航天工程学院）；School of Computation, Information and Technology, Technical University of Munich, Germany（慕尼黑技术大学计算、信息与技术学院）
This work describes a novel mechanism of laminar flow control of a backward swept wing with a comb-like leading edge device. It is inspired by the leading-edge comb on owl feathers and the special design of its barbs, resembling a cascade of complex 3D-curved thin finlets. The details of the geometry of the barbs from an owl feather were used to design a generic model of the comb for experimental and numerical flow studies with the comb attached to the leading edge of a flat plate. Examination was carried out at different sweep angles, because life animal clearly show the backward sweep of the…
During the pull-out maneuver, Peregrine falcons were observed to adopt specific flight configurations which are thought to offer an aerodynamic advantage over aerial prey. Analysis of the flight trajectory of a falcon in a controlled environment shows it experiencing load factors up to 3 and further predictions suggest this could be increased up to almost 10g during high-speed pull-out. This can be attributed to the high maneuverability promoted by lift-generating vortical structures over the wing. Wind-tunnel experiments on life-sized models together with high fidelity simulations on idealize…
Frequency domain Unsteady Lifting-Line Theory (ULLT) provides a means by which the aerodynamics of oscillating wings may be studied at low computational cost without neglecting the interacting effects of aspect ratio and oscillation frequency. Renewed interest in the method has drawn attention to several uncertainties however. Firstly, to what extent is ULLT practically useful for rectangular wings, despite theoretical limitations? And secondly, to what extent is a complicated wake model needed in the outer solution for good accuracy? This paper aims to answer these questions by presenting a c…
The source of the hummingbirds distinctive hum is not well understood, but there are clues to its origin in the acoustic nearfield and farfield. To unravel this mystery, we recorded the acoustic nearfield generated by six freely hovering Annas hummingbirds using a 2176 microphone array. We also directly measured the 3D aerodynamic forces generated by the hummingbird in vivo using a new aerodynamic force platform. To determine the degree to which the aerodynamic forces cause the hum, we developed a simple first-principles model to predict the acoustic field radiated by the 3D oscillating forces…
In this video, effect of chordwise damage on a damselfly (American Rubyspot)'s wings is investigated. High speed photogrammetry was used to collect the data of damselflies' flight with intact and damaged wings along the wing chord. Different level of deterioration of flight performance can be observed. Further investigation will be on the dynamic and aerodynamic roles of each wing with and without damage.
A vortex-lattice method for wing aerodynamics that uses nonlinear airfoil data is presented. Two applications of this procedure are presented: Direct Design of a Flying Wing and Inverse Identification from wind tunnel measurements with low-aspect ratio wings. A Newton method is employed, which not only allows very fast solutions to the nonlinear equations but enables the calculation of static and dynamic stability and control derivatives without further cost.
Saving energy and enhancing performance are secular preoccupations shared by both nature and human beings. In animal locomotion, flapping flyers or swimmers rely on the flexibility of their wings or body to passively increase their efficiency using an appropriate cycle of storing and releasing elastic energy. Despite the convergence of many observations pointing out this feature, the underlying mechanisms explaining how the elastic nature of the wings is related to propulsive efficiency remain unclear. Here we use an experiment with a self-propelled simplified insect model allowing to show how…
