This study analyzes and compares the drivetrain losses of two methods of fuel cell integration in electric vehicle drivetrains. The first is a conventional (boosted) two-stage system while the second is a dual inverter based solution. Each source of drivetrain losses is described by mathematical equations and the impact of higher order harmonics are observed through circuit model simulation. The dual inverter system achieves an overall energy efficiency improvement of 5.27% and 10.13% for highway and urban driving compared to the conventional method. The use of lower voltage rated power modules and lower switching frequency in the dual inverter system has significantly reduced the switching losses and improved the driving efficiency.
This paper examines the degree to which connectivity and automation can potentially reduce the overall fuel consumption of on-road vehicles. The paper begins with a simulation study highlighting the tradeoff between: (i) the fuel that a vehicle can save through speed trajectory shaping, versus (ii) the additional inter-vehicle spacing needed for this trajectory shaping to be feasible. This study shows that connectivity and automation are essential, rather than merely useful, for substantial reductions in the fuel consumed by fixed on-road vehicle powertrain/chassis configurations in traffic. M…
Several approaches have been presented during the last decades to reduce carbon pollution from transportation. One example is the use of platooning mode. This paper considers data obtained from daily trips to investigate the impact of platooning on travel time, emissions of CO2, CO, NO2 and HC and fuel consumption on a road network in Upper Austria. For this purpose, we studied fuel combustion-based engines relying on the extension of the 3DCoAutoSim simulation platform. The obtained results showed that the platooning mode not only increased driving efficiency but also decreased the total emis…
Drivers have distinctively diverse behaviors when operating vehicles in natural traffic flow, such as preferred pedal position, car-following distance, preview time headway, etc. These highly personalized behavioral variations are known to impact vehicle fuel economy qualitatively. Nevertheless, the quantitative relationship between driving behaviors and vehicle fuel consumption remains obscure. Addressing this critical missing link will contribute to the improvement of transportation sustainability, as well as understanding drivers' behavioral diversity. This study proposed an integrated micr…
In this paper, empirical data from the literature are used to develop general power models that capture the impact of a vehicle position, in a platoon of homogeneous vehicles, and the distance gap to its lead (and following) vehicle on its drag coefficient. These models are developed for light duty vehicles, buses, and heavy duty trucks. The models were fit using a constrained optimization framework to fit a general power function using either direct drag force or fuel measurements. The model is then used to extrapolate the empirical measurements to a wide range of vehicle distance gaps within…
An Exact Algorithm for a Fuel-Constrained Autonomous Vehicle Path Planning Problem
Center for Non-Linear Studies, Los Alamos National Laboratory（洛斯阿拉莫斯国家实验室非线性研究中心）；Dept. of Industrial and Systems Engg., Wayne State University（韦恩州立大学工业与系统工程系）；Dept. of Mechanical Engg., Texas A&M University（德克萨斯农工大学机械工程系）
Connectivity in ground vehicles allows vehicles to share crucial vehicle data, such as vehicle acceleration, with each other. Using sensors such as cameras, radars and lidars, on the other hand, the intravehicular distance between a leader vehicle and a host vehicle can be detected, as well as the relative speed. Cooperative Adaptive Cruise Control (CACC) builds upon ground vehicle connectivity and sensor information to form convoys with automated car following. CACC can also be used to improve fuel economy and mobility performance of vehicles in the said convoy. In this paper, 3 car following…
Fuel cell electric vehicles have earned substantial attentions in recent decades due to their high-efficiency and zero-emission features, while the high operating costs remain the major barrier towards their large-scale commercialization. In such context, this paper aims to devise an energy management strategy for an urban postal-delivery fuel cell electric vehicle for operating cost mitigation. First, a data-driven dual-loop spatial-domain battery state-of-charge reference estimator is designed to guide battery energy depletion, which is trained by real-world driving data collected in postal …
In this paper, we introduce an open-source model "MOVESTAR" to calculate the fuel consumption and pollutant emissions of motor vehicles. This model is developed based on U.S. Environmental Protection Agency's (EPA) Motor Vehicle Emission Simulator (MOVES), which provides an accurate estimate of vehicle emissions under a wide range of user-defined conditions. Originally, MOVES requires users to specify many parameters through its software, including vehicle types, time periods, geographical areas, pollutants, vehicle operating characteristics, and road types. In this paper, MOVESTAR is develope…
This paper introduces a robust optimal green light speed advisory system for fixed and actuated traffic signals when a probability distribution is provided. These distributions represent the domain of possible switching times from the Signal Phasing and Timing (SPaT) messages. The system finds the least-cost vehicle trajectory using a computationally efficient A-star algorithm incorporated in a dynamic programming procedure to minimize the vehicle's total fuel consumption. Constraints are introduced to ensure that vehicles do not, collide with other vehicles, run red lights, or exceed a maximu…
Modeling difficulty, time-varying model, and uncertain external inputs are the main challenges for energy management of fuel cell hybrid electric vehicles. In the paper, a fuzzy reinforcement learning-based energy management strategy for fuel cell hybrid electric vehicles is proposed to reduce fuel consumption, maintain the batteries' long-term operation, and extend the lifetime of the fuel cells system. Fuzzy Q-learning is a model-free reinforcement learning that can learn itself by interacting with the environment, so there is no need for modeling the fuel cells system. In addition, frequent…
This paper addresses the problem of trajectory optimization for an unmanned surface vehicle while considering direction-dependent ocean currents and flexible refueling constraints. This work is motivated by the rising interest in developing autonomous navigation technology for commercial, scientific, and military applications for ocean-bound unmanned surface vehicles. Relevant literature on such vehicles has addressed energy-efficient trajectory optimization and time-efficient trajectory optimization. However, the application of trajectory optimization techniques which include refueling stops …
Urban traffic congestion is a chronic problem faced by many cities. It is essentially inefficient infrastructure use which results in increased vehicle fuel consumption and emissions. This in turn adds extra costs to commuters and businesses. Addressing this issue is therefore of paramount interest due to the perceived dual benefit. Many technologies were and are being developed. These include adaptive traffic signals, dedicated lanes, etc. This paper presents a simple platooning algorithm that maintains relatively small distances (pre-specified time gap) between consecutive vehicles to enhanc…
Platooning of vehicles with coordinated adaptive cruise control (CACC) capabilities is a promising technology with a strong potential for fuel savings and congestion mitigation. Although some researchers have studied the vehicle-level fuel savings of platooning, few have considered the system-level benefits. This paper evaluates vehicle platooning as a fuel-reduction method and propose a hierarchical control system. We particularly focus on the impact of platooning coordination algorithm on system-wide benefits. The main task of platooning coordination is to regulate the times at which multipl…
This research details outcomes from a global model which estimates future hydrogen penetration into a carbon constrained energy system to the year 2050. Focusing on minimum and maximum penetration scenarios, an investigation of global fuel cell vehicle (FCV) deployment is undertaken, cognizant of optimal economic deployment at the global level and stakeholder preferences in a case study of Japan. The model is mathematically formulated as a very large-scale linear optimization problem, aiming to minimize system costs, including generation type, fuel costs, conversion costs, and carbon reduction…
This paper proposes an ecological adaptive cruise control (EACC) concept with the primary goal to minimize the fuel consumption in a city bus with an internal combustion engine (ICE). A hybrid model predictive control (HMPC) is implemented in this work to control both continuous and discrete-time variables. Moreover, a multi-objective optimization problem for EACC is formulated in time-domain as a mixed-integer quadratically constrained quadratic programming (MIQCQP) problem. The proposed HMPC-EACC performs robust vehicle-following while tracking a leading vehicle and plans fuel-efficient acce…
The multi-source electromechanical coupling makes the energy management of fuel cell electric vehicles (FCEVs) relatively nonlinear and complex especially in the types of 4-wheel-drive (4WD) FCEVs. Accurate state observing for complicated nonlinear system is the basis for fantastic energy managing in FCEVs. Aiming at releasing the energy-saving potential of FCEVs, a novel learning-based robust model predictive control (LRMPC) strategy is proposed for a 4WD FCEV, contributing to suitable power distribution among multiple energy sources. The well-designed strategy based on machine learning (ML) …
Consecutive traffic signalized intersections can increase vehicle stops, producing vehicle accelerations on arterial roads and potentially increasing vehicle fuel consumption levels. Eco-driving systems are one method to improve vehicle energy efficiency with the help of vehicle connectivity. In this paper, an eco-driving system is developed that computes a fuel-optimized vehicle trajectory while traversing more than one signalized intersection. The system is designed in a modular and scalable fashion allowing it to be implemented in large networks without significantly increasing the computat…
Connected and automated vehicles (CAVs) can plan and actuate control that explicitly considers performance, system safety, and actuation constraints in a manner more efficient than their human-driven counterparts. In particular, eco-driving is enabled through connected exchange of information from signalized corridors that share their upcoming signal phase and timing (SPaT). This is accomplished in the proposed control approach, which follows first principles to plan a free-flow acceleration-optimal trajectory through green traffic light intervals by Pontryagin's Minimum Principle in a feedbac…
To improve the driving mobility and energy efficiency of connected autonomous electrified vehicles, this paper presents an integrated longitudinal speed decision-making and energy efficiency control strategy. The proposed approach is a hierarchical control architecture, which is assumed to consist of higher-level and lower-level controls. As the core of this study, model predictive control and reinforcement learning are combined to improve the powertrain mobility and fuel economy for a group of automated vehicles. The higher-level exploits the signal phase and timing and state information of c…
Our current transportation system suffers from a number of problems in terms of safety, mobility, and environmental sustainability. The emergence of innovative intelligent transportation systems (ITS) technologies, and in particular connected and automated vehicles (CAVs), provides many opportunities to address the aforementioned issues. In this paper, we propose a hierarchical ramp merging system that not only generates microscopic cooperative maneuvers for CAVs on the ramp to merge into the mainline traffic flow, but also provides controllability of the ramp inflow rate, thereby enabling mac…
Optimization Models and Steady-State Minimum-Fuel Operating Strategies for Hydrogen-based Hybrid Electric Aerospace Propulsion Systems
Eindhoven University of Technology（埃因霍温理工大学）；Cranfield University（克兰菲尔德大学）；DLR-Institut für Elektrifizierte Luftfahrtantriebe（德国航空航天中心电气化航空推进研究所）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；Università degli Studi di Genova（热那亚大学）
With recent developments in vehicle and battery technologies, electric vehicles (EVs) are rapidly getting established as a sustainable alternative to traditional fossil-fuel vehicles. This has made the large-scale electrification of ride-sourcing operations a practical viability, providing an opportunity for a leap toward urban sustainability goals. Despite having a similar driving range to fossil-fuel vehicles, EVs are disadvantaged by their long charging times which compromises the total fleet service time. To efficiently manage an EV fleet, the operator needs to address the charge schedulin…
Improving the powertrain control of heavy-duty vehicles can be an efficient way to reduce the fuel consumption and thereby reduce both the operating cost and the environmental impact. One way of doing so is by using information about the upcoming driving conditions, known as look-ahead information, in order to coast with a gear engaged or to use freewheeling. Controllers using such techniques today mainly exist for vehicles in highway driving. This paper therefore targets how such control can be applied to vehicles with more variations in their velocity, such as distribution vehicles. The driv…
ACCESS Linnaeus Centre and the Department of Automatic Control, School of Electrical Engineering, KTH Royal Institute of Technology（ACCESS林奈斯中心，电气工程学院自动控制系，瑞典皇家理工学院）；KTH Royal Institute of Technology（瑞典皇家理工学院）；Scania CV AB（斯堪尼亚商用车公司）
Connected and Automated Vehicles (CAVs), particularly those with a hybrid electric powertrain, have the potential to significantly improve vehicle energy savings in real-world driving conditions. In particular, the Eco-Driving problem seeks to design optimal speed and power usage profiles based on available information from connectivity and advanced mapping features to minimize the fuel consumption over an itinerary. This paper presents a hierarchical multi-layer Model Predictive Control (MPC) approach for improving the fuel economy of a 48V mild-hybrid powertrain in a connected vehicle enviro…
The growing deployment of electric mobility calls for power system analyses to investigate to what extent the simultaneous charging of electric vehicles leads to degraded network operation and to validate the efficiency of countermeasures. To reduce complexity and CPU time, a common approach while performing these analyses consists in replacing electric vehicles and their charging stations with constant PQ loads. However, this approach is inaccurate, as the power absorbed by these elements actually depends not only on voltage but also on the state of charge, charging method, cathode chemistry …
In this paper, a comprehensive Eco-Driving strategy for CAVs is presented. In this setup, multiple driving modes calculate speed profiles ideal for their own set of constraints simultaneously to save fuel as much as possible, while a High Level (HL) controller ensures smooth transitions between the driving modes for Eco-Driving. This Eco-Driving deterministic controller for an ego CAV was equipped with Vehicle-to-Infrastructure (V2I) and Vehicle-to-Vehicle (V2V) algorithms. Simulation results are used to show that the HL controller ensures significant fuel economy improvement as compared to ba…
Predictive energy management of Connected and Automated Vehicles (CAVs), in particular those with multiple power sources, has the potential to significantly improve energy savings in real-world driving conditions. In particular, the eco-driving problem seeks to design optimal speed and power usage profiles based upon available information from connectivity and advanced mapping features to minimize the fuel consumption between two designated locations. In this work, the eco-driving problem is formulated as a three-state receding horizon optimal control problem and solved via Dynamic Programming…
This paper studies the optimal energy management in a group of dwellings having micro fuel cell combined heat and power systems. To increase the self-sufficiency and resilience of such local community, a peer-to-peer energy trading system between dwellings is proposed in which output powers from fuel cells working under their rated powers can be sold to those already reach their rated outputs but still lack powers. The arising optimization problem from this optimal peer-to-peer energy trading system is non-convex due to the nonlinear dependence of power and heat efficiencies on fuel cell outpu…
