In this paper, empirical data from the literature are used to develop general power models that capture the impact of a vehicle position, in a platoon of homogeneous vehicles, and the distance gap to its lead (and following) vehicle on its drag coefficient. These models are developed for light duty vehicles, buses, and heavy duty trucks. The models were fit using a constrained optimization framework to fit a general power function using either direct drag force or fuel measurements. The model is then used to extrapolate the empirical measurements to a wide range of vehicle distance gaps within a platoon. Using these models we estimate the potential fuel reduction associated with homogeneous platoons of light duty vehicles, buses, and heavy duty trucks. The results show a significant reduction in the vehicle fuel consumption when compared with those based on a constant drag coefficient assumption. Specifically, considering a minimum time gap between vehicles of $0.5 \; secs$ (which is typical considering state-of-practice communication and mechanical system latencies) running at a speed of $100 \; km/hr$, the optimum fuel reduction that is achieved is $4.5 \%$, $15.5 \%$, and $7.0 \%$ for light duty vehicle, bus, and heavy duty truck platoons, respectively. For longer time gaps, the bus and heavy duty truck platoons still produce fuel reductions in the order of $9.0 \%$ and $4.5 \%$, whereas light duty vehicles produce negligible fuel savings.
Several approaches have been presented during the last decades to reduce carbon pollution from transportation. One example is the use of platooning mode. This paper considers data obtained from daily trips to investigate the impact of platooning on travel time, emissions of CO2, CO, NO2 and HC and fuel consumption on a road network in Upper Austria. For this purpose, we studied fuel combustion-based engines relying on the extension of the 3DCoAutoSim simulation platform. The obtained results showed that the platooning mode not only increased driving efficiency but also decreased the total emis…
Platooning of vehicles with coordinated adaptive cruise control (CACC) capabilities is a promising technology with a strong potential for fuel savings and congestion mitigation. Although some researchers have studied the vehicle-level fuel savings of platooning, few have considered the system-level benefits. This paper evaluates vehicle platooning as a fuel-reduction method and propose a hierarchical control system. We particularly focus on the impact of platooning coordination algorithm on system-wide benefits. The main task of platooning coordination is to regulate the times at which multipl…
We study a transportation problem where two heavy-duty trucks travel across the national highway from separate origins to destinations, subject to individual deadline constraints. Our objective is to minimize their total fuel consumption by jointly optimizing path planning, speed planning, and platooning configuration. Such a two-truck platooning problem is pervasive in practice yet challenging to solve due to hard deadline constraints and enormous platooning configurations to consider. We first leverage a unique problem structure to significantly simplify platooning optimization and present a…
Urban traffic congestion is a chronic problem faced by many cities. It is essentially inefficient infrastructure use which results in increased vehicle fuel consumption and emissions. This in turn adds extra costs to commuters and businesses. Addressing this issue is therefore of paramount interest due to the perceived dual benefit. Many technologies were and are being developed. These include adaptive traffic signals, dedicated lanes, etc. This paper presents a simple platooning algorithm that maintains relatively small distances (pre-specified time gap) between consecutive vehicles to enhanc…
This paper examines the degree to which connectivity and automation can potentially reduce the overall fuel consumption of on-road vehicles. The paper begins with a simulation study highlighting the tradeoff between: (i) the fuel that a vehicle can save through speed trajectory shaping, versus (ii) the additional inter-vehicle spacing needed for this trajectory shaping to be feasible. This study shows that connectivity and automation are essential, rather than merely useful, for substantial reductions in the fuel consumed by fixed on-road vehicle powertrain/chassis configurations in traffic. M…
Platooning of connected and autonomous vehicles (CAVs) is an emerging technology with a strong potential for throughput improvement and fuel reduction. Adequate macroscopic models are critical for system-level efficiency and reliability of platooning. In this paper, we consider a hybrid queuing model for a mixed-autonomy highway section and develop an easy-to-use training algorithm. The model predicts CAV and non-CAV counts according to the traffic demand as well as key parameters of the highway section. The training algorithm learns the highway parameters from observed data in real time. We t…
Vehicle platooning has been shown to be quite fruitful in the transportation industry to enhance fuel economy, road throughput, and driving comfort. Model Predictive Control (MPC) is widely used in literature for platoon control to achieve certain objectives, such as safely reducing the distance among consecutive vehicles while following the leader vehicle. In this paper, we propose a Distributed Nonlinear MPC (DNMPC), based upon an existing approach, to control a heterogeneous dynamic platoon with unidirectional topologies, handling possible cut-in/cut-out maneuvers. The introduced method add…
As the automotive industry is developing autonomous driving systems and vehicular networks, attention to truck platooning has increased as a way to reduce costs (fuel consumption) and improve efficiency in the highway. Recent research in this area has focused mainly on the aerodynamics, network stability, and longitudinal control of platoons. However, the system aspects (e.g., platoon coordination) are still not well explored. In this paper, we formulate a platooning coordination problem and study whether trucks waiting at an initial location (station) should wait for a platoon to arrive in or…
Connectivity-enabled automation of distributed control systems allow for better anticipation of system disturbances and better prediction of the effects of actuator limitations on individual agents when incorporating a model. Automated convoy of heavy-duty trucks in the form of platooning is one such application designed to maintain close gaps between trucks to exploit drafting benefits and improve fuel economy, and has traditionally been handled with classically-designed connected and adaptive cruise control (CACC). This paper is motivated by demonstrated limitations of such a control strateg…
Platooning Connected, Autonomous, and Human-Driven Vehicles: A Deep Reinforcement Learning-based Approach
School of Systems Science, Beijing Jiaotong University, Beijing 100044, China（北京交通大学系统科学学院）；Faculty of Science and Engineering, University of Nottingham Ningbo China（诺丁汉大学宁波分校理学院）
We consider the platoon matching problem for a set of trucks with the same origin, but different destinations. It is assumed that the vehicles benefit from traveling in a platoon for instance through reduced fuel consumption. The vehicles belong to different fleet owners and their strategic interaction is modeled as a non-cooperative game where the vehicle actions are their departure times. Each truck has a preferred departure time and its utility function is defined as the difference between its benefit from platooning and the cost of deviating from its preferred departure time. We show that …
Platooning and coordination are two implementation strategies that are frequently proposed for traffic control of connected and autonomous vehicles (CAVs) at signal-free intersections instead of using conventional traffic signals. However, few studies have attempted to integrate both strategies to better facilitate the CAV control at signal-free intersections. To this end, this study proposes a hierarchical control model, named COOR-PLT, to coordinate adaptive CAV platoons at a signal-free intersection based on deep reinforcement learning (DRL). COOR-PLT has a two-layer framework. The first la…
ACCESS Linnaeus Centre and the Department of Automatic Control, School of Electrical Engineering, KTH Royal Institute of Technology（ACCESS林奈斯中心，电气工程学院自动控制系，瑞典皇家理工学院）；KTH Royal Institute of Technology（瑞典皇家理工学院）；Scania CV AB（斯堪尼亚商用车公司）
Cooperative Adaptive Cruise Control (CACC) is an autonomous vehicle-following technology that allows groups of vehicles on the highway to form in tightly-coupled platoons. This is accomplished by exchanging inter-vehicle data through Vehicle-to-Vehicle (V2V) wireless communication networks. CACC increases traffic throughput and safety, and decreases fuel consumption. However, the surge of vehicle connectivity has brought new security challenges as vehicular networks increasingly serve as new access points for adversaries trying to deteriorate the platooning performance or even cause collisions…
Vehicle platooning has the potential to significantly improve traffic throughput and reduce fuel consumption and emissions and thus has attracted extensive attention recently. In this study, we propose a hybrid vehicle platoon system for the connected and automated vehicles (CAVs). First, a hybrid spacing policy combining the constant time gap (CTG) and constant spacing (CS) is formulated for the proposed platoon system, where the leader adopts the CTG and the followers use the CS policy. Based on the h2-norm string stability criteria, the notions of exogenous-head-to-tail string stability and…
