We address the manipulation task of retrieving a target object from a cluttered shelf. When the target object is hidden, the robot must search through the clutter for retrieving it. Solving this task requires reasoning over the likely locations of the target object. It also requires physics reasoning over multi-object interactions and future occlusions. In this work, we present a data-driven hybrid planner for generating occlusion-aware actions in closed-loop. The hybrid planner explores likely locations of the occluded target object as predicted by a learned distribution from the observation stream. The search is guided by a heuristic trained with reinforcement learning to act on observations with occlusions. We evaluate our approach in different simulation and real-world settings (video available on https://youtu.be/dY7YQ3LUVQg). The results validate that our approach can search and retrieve a target object in near real time in the real world while only being trained in simulation.
We consider artificial agents that learn to jointly control their gripperand camera in order to reinforcement learn manipulation policies in the presenceof occlusions from distractor objects. Distractors often occlude the object of in-terest and cause it to disappear from the field of view. We propose hand/eye con-trollers that learn to move the camera to keep the object within the field of viewand visible, in coordination to manipulating it to achieve the desired goal, e.g.,pushing it to a target location. We incorporate structural biases of object-centricattention within our actor-critic arc…
Stanford University（斯坦福大学）；Caltech（加州理工学院）；University of Toronto（多伦多大学）；Vector Institute（向量学院）；Nvidia（英伟达）
When searching for objects in cluttered environments, it is often necessary to perform complex interactions in order to move occluding objects out of the way and fully reveal the object of interest and make it graspable. Due to the complexity of the physics involved and the lack of accurate models of the clutter, planning and controlling precise predefined interactions with accurate outcome is extremely hard, when not impossible. In problems where accurate (forward) models are lacking, Deep Reinforcement Learning (RL) has shown to be a viable solution to map observations (e.g. images) to good …
Clutter Resilient Occlusion Avoidance for Tightly-Coupled Motion-Assisted Detection
Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences（中国科学院深圳先进技术研究院）；University of Macau（澳门大学）；Weizmann Institute of Science（魏茨曼科学研究所）；Southern University of Science Technology（南方科技大学）
We present joint learning of instance and semantic segmentation for visible and occluded region masks. Sharing the feature extractor with instance occlusion segmentation, we introduce semantic occlusion segmentation into the instance segmentation model. This joint learning fuses the instance- and image-level reasoning of the mask prediction on the different segmentation tasks, which was missing in the previous work of learning instance segmentation only (instance-only). In the experiments, we evaluated the proposed joint learning comparing the instance-only learning on the test dataset. We als…
Australian Centre for Robotic Vision（澳大利亚机器人视觉中心）；Queensland University of Technology（昆士兰科技大学）
Camera viewpoint selection is an important aspect of visual grasp detection, especially in clutter where many occlusions are present. Where other approaches use a static camera position or fixed data collection routines, our Multi-View Picking (MVP) controller uses an active perception approach to choose informative viewpoints based directly on a distribution of grasp pose estimates in real time, reducing uncertainty in the grasp poses caused by clutter and occlusions. In trials of grasping 20 objects from clutter, our MVP controller achieves 80% grasp success, outperforming a single-viewpoint…
Recent work in robotic manipulation focuses on object retrieval in cluttered spaces under occlusion. Nevertheless, the majority of efforts lack an analysis of conditions for the completeness of the approaches or the methods apply only when objects can be removed from the workspace. This work formulates the general, occlusion-aware manipulation task, and focuses on safe object reconstruction in a confined space with in-place rearrangement. It proposes a framework that ensures safety with completeness guarantees. Furthermore, an algorithm, which is an instantiation of this abstract framework for…
Beijing National Research Center for Information Science and Technology（北京信息科学与技术国家研究中心）；Tsinghua University（清华大学）
Grasping in dense clutter is a fundamental skill for autonomous robots. However, the crowdedness and occlusions in the cluttered scenario cause significant difficulties to generate valid grasp poses without collisions, which results in low efficiency and high failure rates. To address these, we present a generic framework called GE-Grasp for robotic motion planning in dense clutter, where we leverage diverse action primitives for occluded object removal and present the generator-evaluator architecture to avoid spatial collisions. Therefore, our GE-Grasp is capable of grasping objects in dense …
Retrieving an object from cluttered spaces suchas cupboards, refrigerators, or bins requires tracking objects with limited or no visual sensing. In these scenarios, contact feedback is necessary to estimate the pose of the objects, yet the objects are movable while their shapes and number may be unknown, making the association of contacts with objects extremely difficult. While previous work has focused on multi-target tracking, the assumptions therein prohibit using prior methods given only the contact-sensing modality. Instead, this paper proposes the method Soft Tracking Using Contacts for …
Rutgers, the State University of New Jersey（罗格斯大学（新泽西州立大学））
In this study, working with the task of object retrieval in clutter, we have developed a robot learning framework in which Monte Carlo Tree Search (MCTS) is first applied to enable a Deep Neural Network (DNN) to learn the intricate interactions between a robot arm and a complex scene containing many objects, allowing the DNN to partially clone the behavior of MCTS. In turn, the trained DNN is integrated into MCTS to help guide its search effort. We call this approach learning-guided Monte Carlo tree search for Object REtrieval (MORE), which delivers significant computational efficiency gains a…
Non-prehensile manipulation methods usually use a simple end effector, e.g., a single rod, to manipulate the object. Compared to the grasping method, such an end effector is compact and flexible, and hence it can perform tasks in a constrained workspace; As a trade-off, it has relatively few degrees of freedom (DoFs), resulting in an under-actuation problem with complex constraints for planning and control. This paper proposes a new non-prehensile manipulation method for the task of object retrieval in cluttered environments, using a rod-like pusher. Specifically, a candidate trajectory in a c…
Rutgers, the State University of New Jersey（罗格斯大学（新泽西州立大学））
This paper considers the problem of retrieving an object from many tightly packed objects using a combination of robotic pushing and grasping actions. Object retrieval in dense clutter is an important skill for robots to operate in households and everyday environments effectively. The proposed solution, Visual Foresight Trees (VFT), intelligently rearranges the clutter surrounding a target object so that it can be grasped easily. Rearrangement with nested nonprehensile actions is challenging as it requires predicting complex object interactions in a combinatorially large configuration space of…
Korea Institute of Science and Technology（韩国科学技术研究院）
This paper presents planning algorithms for a robotic manipulator with a fixed base in order to grasp a target object in cluttered environments. We consider a configuration of objects in a confined space with a high density so no collision-free path to the target exists. The robot must relocate some objects to retrieve the target while avoiding collisions. For fast completion of the retrieval task, the robot needs to compute a plan optimizing an appropriate objective value directly related to the execution time of the relocation plan. We propose planning algorithms that aim to minimize the num…
Korea Institute of Science and Technology（韩国科学技术研究院）；Inha University（仁荷大学）
We consider the problem of retrieving a target object from a confined space by two robotic manipulators where overhand grasps are not allowed. If other movable obstacles occlude the target, more than one object should be relocated to clear the path to reach the target object. With two robots, the relocation could be done efficiently by simultaneously performing relocation tasks. However, the precedence constraint between the tasks (e.g, some objects at the front should be removed to manipulate the objects in the back) makes the simultaneous task execution difficult. We propose a coordination m…
Korea Institute of Science and Technology（韩国科学技术研究院）
This paper presents a task and motion planning (TAMP) framework for a robotic manipulator in order to retrieve a target object from clutter. We consider a configuration of objects in a confined space with a high density so no collision-free path to the target exists. The robot must relocate some objects to retrieve the target without collisions. For fast completion of object rearrangement, the robot aims to optimize the number of pick-and-place actions which often determines the efficiency of a TAMP framework. We propose a task planner incorporating motion planning to generate executable plans…
University of California, Berkeley（加州大学伯克利分校）；Stanford University（斯坦福大学）
When operating in unstructured environments such as warehouses, homes, and retail centers, robots are frequently required to interactively search for and retrieve specific objects from cluttered bins, shelves, or tables. Mechanical Search describes the class of tasks where the goal is to locate and extract a known target object. In this paper, we formalize Mechanical Search and study a version where distractor objects are heaped over the target object in a bin. The robot uses an RGBD perception system and control policies to iteratively select, parameterize, and perform one of 3 actions -- pus…
This work proposes a process for efficiently searching over combinations of individual object 6D pose hypotheses in cluttered scenes, especially in cases involving occlusions and objects resting on each other. The initial set of candidate object poses is generated from state-of-the-art object detection and global point cloud registration techniques. The best-scored pose per object by using these techniques may not be accurate due to overlaps and occlusions. Nevertheless, experimental indications provided in this work show that object poses with lower ranks may be closer to the real poses than …
GraspClutter6D: A Large-scale Real-world Dataset for Robust Perception and Grasping in Cluttered Scenes
Korea Institute of Machinery & Materials (KIMM)（韩国机械材料研究院）；Gwangju Institute of Science and Technology (GIST)（全州科学技术院）；Korea Advanced Institute of Science and Technology (KAIST)（韩国科学技术院）
Robots in the real world frequently come across identical objects in dense clutter. When evaluating grasp poses in these scenarios, a target-driven grasping system requires knowledge of spatial relations between scene objects (e.g., proximity, adjacency, and occlusions). To efficiently complete this task, we propose a target-driven grasping system that simultaneously considers object relations and predicts 6-DoF grasp poses. A densely cluttered scene is first formulated as a grasp graph with nodes representing object geometries in the grasp coordinate frame and edges indicating spatial relatio…
ClutterDexGrasp: A Sim-to-Real System for General Dexterous Grasping in Cluttered Scenes
CFCS, School of Computer Science, Peking University（计算机学院，北京大学）；PKU-AgiBot Lab（北京大学阿吉机器人实验室）；PKU-PsiBot Lab（北京大学Psi机器人实验室）；Princeton University（普林斯顿大学）
FetchBot: Learning Generalizable Object Fetching in Cluttered Scenes via Zero-Shot Sim2Real
Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；CFCS, School of Computer Science, Peking University（计算机科学系，北京大学）；Galbot；Beijing Academy of Artificial Intelligence（北京人工智能研究院）
TransBiolab: A Real-World Multi-View Dataset of Cluttered Transparent Biomedical Objects
School of Artificial Intelligence and Automation, Huazhong University of Science and Technology（华中科技大学人工智能与自动化学院）；College of Design and Innovation, Tongji University（同济大学设计创意学院）；Shanghai Institute for Intelligent Autonomous Systems, Tongji University（同济大学上海智能无人系统研究院）；School of Software and Engineering, Huazhong University of Science and Technology（华中科技大学软件学院）
Gwangju Institute of Science and Technology（光州科学技术院）
Instance-aware segmentation of unseen objects is essential for a robotic system in an unstructured environment. Although previous works achieved encouraging results, they were limited to segmenting the only visible regions of unseen objects. For robotic manipulation in a cluttered scene, amodal perception is required to handle the occluded objects behind others. This paper addresses Unseen Object Amodal Instance Segmentation (UOAIS) to detect 1) visible masks, 2) amodal masks, and 3) occlusions on unseen object instances. For this, we propose a Hierarchical Occlusion Modeling (HOM) scheme desi…
We propose GeoFusion, a SLAM-based scene estimation method for building an object-level semantic map in dense clutter. In dense clutter, objects are often in close contact and severe occlusions, which brings more false detections and noisy pose estimates from existing perception methods. To solve these problems, our key insight is to consider geometric consistency at the object level within a general SLAM framework. The geometric consistency is defined in two parts: geometric consistency score and geometric relation. The geometric consistency score describes the compatibility between object ge…
Recognizing objects in dense clutter accurately plays an important role to a wide variety of robotic manipulation tasks including grasping, packing, rearranging and many others. However, conventional visual recognition models usually miss objects because of the significant occlusion among instances and causes incorrect prediction due to the visual ambiguity with the high object crowdedness. In this paper, we propose an interactive exploration framework called Smart Explorer for recognizing all objects in dense clutters. Our Smart Explorer physically interacts with the clutter to maximize the r…
Beijing University of Posts and Telecommunications（北京邮电大学）；Tsinghua University（清华大学）；Beijing National Research Center for Information Science and Technology（北京信息科学与技术国家研究中心）
Accurately estimating the shape of objects in dense clutters makes important contribution to robotic packing, because the optimal object arrangement requires the robot planner to acquire shape information of all existed objects. However, the objects for packing are usually piled in dense clutters with severe occlusion, and the object shape varies significantly across different instances for the same category. They respectively cause large object segmentation errors and inaccurate shape recovery on unseen instances, which both degrade the performance of shape estimation during deployment. In th…
In this paper, a quick and efficient method is presented for grasping unknown objects in clutter. The grasping method relies on real-time superquadric (SQ) representation of partial view objects and incomplete object modelling, well suited for unknown symmetric objects in cluttered scenarios which is followed by optimized antipodal grasping. The incomplete object models are processed through a mirroring algorithm that assumes symmetry to first create an approximate complete model and then fit for SQ representation. The grasping algorithm is designed for maximum force balance and stability, tak…
Images of heavily occluded objects in cluttered scenes, such as fruit clusters in trees, are hard to segment. To further retrieve the 3D size and 6D pose of each individual object in such cases, bounding boxes are not reliable from multiple views since only a little portion of the object's geometry is captured. We introduce the first CNN-based ellipse detector, called Ellipse R-CNN, to represent and infer occluded objects as ellipses. We first propose a robust and compact ellipse regression based on the Mask R-CNN architecture for elliptical object detection. Our method can infer the parameter…
This paper focuses on vision-based pose estimation for multiple rigid objects placed in clutter, especially in cases involving occlusions and objects resting on each other. Progress has been achieved recently in object recognition given advancements in deep learning. Nevertheless, such tools typically require a large amount of training data and significant manual effort to label objects. This limits their applicability in robotics, where solutions must scale to a large number of objects and variety of conditions. Moreover, the combinatorial nature of the scenes that could arise from the placem…
