A new strategy is proposed to control interior permanent magnet generators in dc microgrids interfaced through an active rectifier. The controller design is based on the decomposition of the system dynamics into slow and fast modes using singular perturbation theory. An inner current controller is developed based on output regulation techniques and an outer voltage controller is proposed using Nonlinear Model Predictive Control (NMPC). The NMPC regulates the dc bus voltage and minimizes the ac side losses. Simulation results are then presented based on realistic conditions for aircraft power systems.
A Communication-Free Master-Slave Microgrid with Power Sharing
Johann Bernoulli Institute for Mathematics and Computer Science, University of Groningen（格罗宁根大学约翰·伯努利数学与计算机科学研究所）；Engineering and Technology Institute, University of Groningen（格罗宁根大学工程与技术研究所）
In autonomous microgrids frequency regulation (FR) is a critical issue, especially with a high level of penetration of the photovoltaic (PV) generation. In this study, a novel virtual synchronous generator (VSG) control for PV generation was introduced to provide frequency support without energy storage. PV generation reserve a part of the active power in accordance with the pre-defined power versus voltage curve. Based on the similarities of the synchronous generator power-angle characteristic curve and the PV array characteristic curve, PV voltage Vpv can be analogized to the power angle δ. …
This paper proposes a disturbance observer-based control (DOBC) method for frequency and voltage regulation of a solar photovoltaic (PV)-diesel generator(DG) based hybrid microgrid during islanding conditions. The DOBC is integrated as a feed-forward control to the synchronous generator based DG, which handles real-time power mismatches and regulates the microgrid frequency and voltage under islanding. To substantiate the operational robustness of the developed controller under real-time uncertainties arising due to variability in PV output and load, the controller has been tested under worstc…
Interior permanent magnet synchronous machine drives are widely employed in electric traction systems and various industrial processes. However, prolonged exposure to high temperatures while operating can demagnetize the permanent magnets to the point of irreversible demagnetization. In addition, direct measurements with infrared sensors or contact-type sensors with wireless communication can be expensive and intrusive to the motor drive systems. This paper thus proposes a nonintrusive thermal monitoring scheme for the permanent magnets inside the direct-torque-controlled interior permanent ma…
A resonance and an antiresonance peak characterize many industrial mechanisms dynamics driven by a Permanent Magnet Synchronous Motor (PMSM). The presence of the resonance peak can lead to vibrations and instability of the system. On that account, advanced methods exist to tune the speed Proportional Integral (PI) controller based on adaptive or fuzzy theory. However, those methods require expertise in control theory and are not available in commercial drives. For that, this paper proposes a Bode-based method for PI parameters selection in combination with a notch filter that can be easily set…
A timely, accurate, and secure dynamic state estimation is needed for reliable monitoring and efficient control of microgrids. The synchrophasor technology enables us to obtain synchronized measurements in real-time and to develop dynamic state estimators for real-time monitoring and control of microgrids. In this study, we consider an AC microgrid comprising several synchronous generators and inverter-interface power supplies, and focus on securely estimating the dynamic states of the microgrid from a set of corrupted data. We propose a dynamic state estimator which enables the microgrid oper…
In this paper, we present a model-based frequency controller for microgrids with nonzero line resistances based on a port-Hamiltonian formulation of the microgrid model and real-time dynamic pricing. The controller is applicable for conventional generation with synchronous machines as well as for power electronics interfaced sources and it is robust against power fluctuations from uncontrollable loads or volatile regenerative sources. The price-based formulation allows additional requirements such as active power sharing to be met. The capability and effectiveness of our procedure is demonstra…
In this paper, we present a Nonlinear-Proportional Integrator (N-PI) disturbance observer (DOB) to enhance the motion tracking of the performance of a surface-mounted Permanent Magnet Synchronous Motor (SPMSM) in rapidly speed varying regions. By presenting an N-PI-DOB for load torque estimation with torque modulation technique, we show that the tracking error dynamics of angular position/velocity are coupled with tracking errors of currents loop and estimation errors. After analyzing disturbances of currents tracking error dynamics, we design the N-PI-DOB and Lyapunov-based nonlinear currents…
A globally exponentially stable position observer for interior permanent magnet synchronous motors
ITMO University（圣彼得堡信息、光学和机械大学）；The University of Sydney（悉尼大学）；University of Belgrade（贝尔格莱德大学）；Pohang University of Science and Technology (POSTECH)（韩国科学技术院）
In this study, a new approach based on adaptive dynamic programming (ADP) is proposed to control permanent magnet synchronous motors (PMSMs). The objective of this paper is to control the torque and consequently the speed of a PMSM when an unknown load torque is applied to it. The proposed controller achieves a fast transient response, low ripples and small steady-state error. The control algorithm uses two neural networks, called critic and actor. The former is utilized to evaluate the cost and the latter is used to generate control signals. The training is done once offline and the calculate…
In this paper, we present a hybrid sensorless observer for Permanent Magnets Synchronous Machines, with no a priori knowledge of the mechanical dynamics and without the typical assumption of constant or slowly-varying speed. Instead, we impose the rotor speed to have a constant (unknown) sign and a non-zero magnitude at all times. For the design of the proposed scheme, meaningful Lie group formalism is adopted to describe the rotor position as an element of the unit circle. This choice, however, leads to a non-contractible state space, and therefore it introduces topological constraints that c…
The performance of model predictive controllers (MPC) strongly depends on the model quality. In the field of electric drive control, white-box (WB) modeling approaches derived from first-order physical principles are most common. This procedure typically does not cover parasitic effects and parameter deviations are frequent. These issues are particularly crucial in the domain of self-commissioning drives when a hand-tailored, accurate WB plant model is not available. In order to compensate for such modeling errors and, therefore, to improve the control performance during transients and steady-…
A New Signal Injection-based Method for Estimation of Position in Interior Permanent Magnet Synchronous Motors
Shanghai Jiao Tong University（上海交通大学）；Laboratoire des Signaux et Systèmes, CNRS - CentraleSupélec（信号与系统实验室，法国国家科学研究中心-中央理工-高等电力学院）；University of Belgrade（贝尔格莱德大学）；ITMO University（ITMO大学）；Tufts University（塔夫茨大学）
This paper investigates the design of a robust output-feedback linear parameter-varying (LPV) gain-scheduled controller for the speed regulation of a surface permanent magnet synchronous motor (SPMSM). Motor dynamics is defined in the $α- β$ stationary reference frame and a parameter-varying model formulation is provided to describe the SPMSM nonlinear dynamics. In this context, a robust gain-scheduled LPV output-feedback dynamic controller is designed to satisfy the asymptotic stability of the closed-loop system and meet desired performance requirements, as well as, guarantee robustness again…
This project discusses the control schemes for distribution grids with a large amount of wind penetration. Microgrids are constantly gaining popularity, especially in the countries, where there is energy crisis. Various systems, including synchronous generators, grid and loads, have been investigated in this project. Major focus is placed on active and reactive power sharing. Droop control for multiple synchronous generators is explored. The phenomenon of load transients has also been reviewed and associated simulations have been carried out on SimPower Systems. Constant wind power has been in…
Diesel electric generators are an inherent part of remote hybrid microgrids found in remote regions of the world that provide primary frequency response (PFR) to restore system frequency during load or generation changes. However, with inverter-based resources (IBR) integration into microgrids, the IBR control provides a fast frequency response (FFR) to restore the system frequency. Hence, supplementing PFR with FFR requires a sophisticated control system and a high fidelity diesel electric generator model to design these control systems. In this work, a high-fidelity model of a diesel electri…
Network reconfiguration (NR) has recently received significant attention due to its potential to improve grid resilience by realizing self-healing microgrids (MGs). This paper proposes a new strategy for the real-time frequency regulation of a reconfigurable MG, wherein the feedforward control of synchronous and inverter-interfaced distributed generators (DGs) is achieved in coordination with the operations of sectionalizing and tie switches (SWs). This enables DGs to compensate more quickly, and preemptively, for a forthcoming variation in load demand due to NR-aided restoration. An analytica…
Monitoring the magnet temperature in permanent magnet synchronous motors (PMSMs) for automotive applications is a challenging task for several decades now, as signal injection or sensor-based methods still prove unfeasible in a commercial context. Overheating results in severe motor deterioration and is thus of high concern for the machine's control strategy and its design. Lack of precise temperature estimations leads to lesser device utilization and higher material cost. In this work, several machine learning (ML) models are empirically evaluated on their estimation accuracy for the task of …
Inverter-connected resources can improve transient stability in low-inertia grids by injecting active power to minimize system frequency deviations following disturbances. In practice, most generation and load disturbances are step changes and the engineering figure-of-merit is often the peak overshoot in frequency resulting from these step disturbances. In addition, the inverter-connected resources tend to saturate much more easily than conventional synchronous machines. However, despite these challenges, standard controller designs must deal with averaged quantities through $H_2$ or $H_\inft…
Grid-forming inverter-based autonomous microgrids present new operational challenges as the stabilizing rotational inertia of synchronous machines is absent. The design of efficient control policies for grid-forming inverters is, however, a non-trivial problem where multiple performance objectives need to be satisfied, including voltage/frequency regulation, current limiting capabilities, as well as active power sharing and a scalable operation. We propose in this paper a novel control architecture for frequency and voltage control which allows current limitation via an inner loop, active powe…
In a purely inverter-based microgrid, both grid-forming (GFM) and grid-following (GFL) inverters will have a crucial role to play in frequency/voltage regulation and maintaining power sharing through their grid support capabilities. Consequently, the coordination between these two technologies becomes increasingly important for optimal system performance. However, the existing work does not consider GFL's potential to participate in a secondary control in coordination with GFM, thus not able to utilize the full capability of inverter resources. In this paper, we show that it is possible to ful…
An islanded inverter-based microgrid is a collection of heterogeneous DC energy resources, e.g., photovoltaic arrays, fuel cells, and energy-storage devices, interfaced to an AC distribution network and operated independently from the bulk power system. Energy conversion is typically managed by power electronics in voltage source inverters. Drawing from the control of synchronous machines in bulk power systems, different control schemes have been recently adopted in order to achieve a stable network operation. The vast majority of academic and industrial efforts opt for these strategies during…
Composite Adaptive Higher-Order Control Barrier Functions for Joint Frequency-RoCoF Safety in Low-Inertia SIDS Microgrids
Engineering Department M&E Partners (Barbados) Limited（M&E Partners（巴巴多斯）有限公司工程部）；Department of Electrical and Computer Engineering The University of the West Indies（西印度大学电气与计算机工程系）
In this paper, an improved multi-step finite control set model predictive current control (FCS-MPCC) strategy with speed loop disturbance compensation is proposed for permanent magnet synchronous machine (PMSM) drives system. A multi-step prediction mechanism is beneficial to significantly improve the steady-state performance of the motor system. While the conventional multi-step prediction has the defect of heavy computational burden, an improved multi-step finite control set model predictive current control (IM MPCC) strategy is proposed by developing a new multi-step prediction mechanism. F…
This paper investigates the combination of two model predictive control concepts, sequential model predictive control and long-horizon model predictive control for power electronics. To achieve sequential model predictive control, the optimization problem is split into two subproblems: The first one summarizes all control goals which linearly depend on the system inputs. Sequential model predictive control generally requires to obtain more than one solution for the first subproblem. Due to the mixed-integer nature of finite control set model predictive control power electronics a special spher…
In this work we present a novel dual-port grid-forming control strategy, for permanent magnet synchronous generator wind turbines with back-to-back voltage source converters, that unifies the entire range of functions from maximum power point tracking (MPPT) to providing inertia and fast frequency response without explicit mode switching between grid-following and grid-forming control. The controls impose a well-defined AC voltage at the grid-side converter (GSC) and the machine-side converter (MSC) AC terminals and explicitly stabilize the DC-link capacitor voltage through both GSC and MSC. T…
