Unmanned aerial vehicles (UAVs) can be users that support new applications, or be communication access points that serve terrestrial and/or aerial users. In this paper, we focus on the connectivity problem of aerial users when they are exclusively served by aerial base stations (BS), i.e., UAVBSs. Specifically, the 3D placement problem of a directional antenna equipped UAV-BS, aiming to maximize the number of covered aerial users under a spectrum sharing policy with terrestrial networks, is investigated. Given a known spectrum sharing policy between the aerial and terrestrial networks, we propose a 3D placement algorithm that achieves optimality. Simulation results show the performance of our approach, in terms of number of covered aerial users, for different configurations and parameters, such as the spectrum sharing policy, antenna beamwidth, transmit power, and aerial users density. These results represent novel guidelines for exclusive aerial networks deployment and applications, distinctively for orthogonal and non-orthogonal spectrum sharing policies with terrestrial networks.
We consider the relaying application of unmanned aerial vehicles (UAVs), in which UAVs are placed between two transceivers (TRs) to increase the throughput of the system. Instead of studying the placement of UAVs as pursued in existing literature, we focus on investigating the placement of a jammer or a major source of interference on the ground to effectively degrade the performance of the system, which is measured by the maximum achievable data rate of transmission between the TRs. We demonstrate that the optimal placement of the jammer is in general a non-convex optimization problem, for wh…
In recent years, unmanned aerial vehicles (UAVs) have been considered for telecommunications purposes as relays, caches, or IoT data collectors. In addition to being easy to deploy, their maneuverability allows them to adjust their location to optimize the capacity of the link to the user equipment on the ground or of the link to the basestation. The majority of the previous work that analyzes the optimal placement of such a UAV makes at least one of two assumptions: the channel can be predicted using a simple model or the locations of the users on the ground are known. In this paper, we use d…
Cooperative communication using unmanned aerial vehicles (UAVs) is a promising technology for infrastructureless wireless networks. One of the key challenges in UAV based communications is the backhaul throughput. In this paper, we propose optimization of the UAV swarm positions to achieve a high mulitplexing gain in line-of-sight (LoS) MIMO backhaul. We develop two distributed algorithms to position the UAVs such that each UAV moves a minimal distance to realize the highest capacity LoS MIMO channel. The first approach uses iterative gradient descent (GD) and the second uses iterative brute f…
Channel knowledge map (CKM) has recently emerged to facilitate the placement and trajectory optimization for unmanned aerial vehicle (UAV) communications. This paper investigates a CKM-assisted multi-UAV wireless network, by focusing on the construction and utilization of CKMs for multi-UAV placement optimization. First, we consider the CKM construction problem when data measurements for only a limited number of points are available. Towards this end, we exploit a data-driven interpolation technique to construct CKMs to characterize the signal propagation environments. Next, we study the multi…
Deployment of unmanned aerial vehicles (UAVs) as aerial base stations can deliver a fast and flexible solution for serving varying traffic demand. In order to adequately benefit of UAVs deployment, their efficient placement is of utmost importance, and requires to intelligently adapt to the environment changes. In this paper, we propose a learning-based mechanism for the three-dimensional deployment of UAVs assisting terrestrial cellular networks in the downlink. The problem is modeled as a non-cooperative game among UAVs in satisfaction form. To solve the game, we utilize a low complexity alg…
New Mexico Tech（新墨西哥理工学院）；Amir Kabir University of Technology（阿米尔·卡比尔理工大学）；Utah Valley university（犹他谷大学）
Temporary high traffic requests in cellular networks is a challenging problem to address. Recent advances in Unmanned Aerial Vehicles applied to cover these types of traffics. UAV -Mounted Mobile Base Stations placement is a challenging problem to achieve high performance. Different approaches have been proposed; however, user required traffic is not considered in UAV placement. We propose a new feature to apply to K-means clustering to find the optimum clusters. User required traffic is defined as a new feature to assign users to the UAVs. Our simulation results show that UAVs could be placed…
This paper considers LEO satellite- and cache-assisted UAV communications for content delivery in terrestrial networks, which shows great potential for next-generation systems to provide ubiquitous connectivity and high capacity. Specifically, caching is provided by the UAV to reduce backhaul congestion, and the LEO satellite supports the UAV's backhaul link. In this context, we aim to maximize the minimum achievable throughput per ground user (GU) by jointly optimizing cache placement, the UAV's resource allocation, and trajectory while cache capacity and flight time are limited. The formulat…
In this paper, we consider an Unmanned Aerial Vehicle (UAV)-assisted cellular system which consists of multiple UAV base stations (BSs) cooperating the terrestrial BSs. In such a heterogeneous network, for cellular operators, the problem is how to determine the appropriate number, locations, and altitudes of UAV-BSs to improve the system sumrate as well as satisfy the demands of arbitrarily flash crowds on data rates. We propose a data-driven 3D placement of UAV-BSs for providing an effective placement result with a feasible computational cost. The proposed algorithm searches for the appropria…
We consider multiple unmanned aerial vehicles (UAVs) serving a density of ground terminals (GTs) as base stations. The objective is to minimize the outage probability of GT-to-UAV transmissions. Optimal placement of UAVs under different UAV altitude constraints and GT densities is studied. First, using a random deployment argument, a general upper bound on the optimal outage probability is found for any density of GTs and any number of UAVs. A matching lower bound is also derived to show that the optimal outage probability decays exponentially with the number of UAVs. Next, the structure of op…
Unmanned aerial vehicles (UAVs) have been widely used in many applications. The limited flight time of UAVs, however, still remains as a major challenge. Although numerous approaches have been developed to recharge the battery of UAVs effectively, little is known about optimal methodologies to deploy charging stations. In this paper, we address the charging station deployment problem with an aim to find the optimal number and locations of charging stations such that the system performance is maximized. We show that the problem is NP-Hard and propose UBAT, a heuristic framework based on the ant…
Beijing University of Posts and Telecommunications（北京邮电大学）；Queen Mary University of London（伦敦玛丽女王大学）
This article investigates the cache-enabling unmanned aerial vehicle (UAV) cellular networks with massive access capability supported by non-orthogonal multiple access (NOMA). The delivery of a large volume of multimedia contents for ground users is assisted by a mobile UAV base station, which caches some popular contents for wireless backhaul link traffic offloading. In cache-enabling UAV NOMA networks, the caching placement of content caching phase and radio resource allocation of content delivery phase are crucial for network performance. To cope with the dynamic UAV locations and content r…
National Chiao Tung University（国立交通大学）；University of Houston（休斯顿大学）
The unmanned aerial vehicles base stations (UAV-BSs) have great potential in being widely used in many dynamic application scenarios. In those scenarios, the movements of served user equipments (UEs) are inevitable, so the UAV-BSs needs to be re-positioned dynamically for providing seamless services. In this paper, we propose a system framework consisting of UEs clustering, UAV-BS placement, UEs trajectories prediction, and UAV-BS reposition matching scheme, to serve the UEs seamlessly as well as minimize the energy cost of UAV-BSs' reposition trajectories. An Echo State Network (ESN) based al…
This paper investigates a new downlink nonorthogonal multiple access (NOMA) system, where a multiantenna unmanned aerial vehicle (UAV) is powered by wireless power transfer (WPT) and serves as the base station for multiple pairs of ground users (GUs) running NOMA in each pair. An energy efficiency (EE) maximization problem is formulated to jointly optimize the WPT time and the placement for the UAV, and the allocation of the UAV's transmit power between different NOMA user pairs and within each pair. To efficiently solve this nonconvex problem, we decompose the problem into three subproblems u…
This letter considers an unmanned aerial vehicle (UAV)-enabled relay communication system for delivering latency-critical messages with ultra-high reliability, where the relay is operating under amplifier-and-forward (AF) mode. We aim to jointly optimize the UAV location and power to minimize decoding error probability while guaranteeing the latency constraints. Both the free-space channel model and three-dimensional (3-D) channel model are considered. For the first model, we propose a low-complexity iterative algorithm to solve the problem, while globally optimal solution is derived for the c…
A swarm of cooperating UAVs communicating with a distant multiantenna ground station can leverage MIMO spatial multiplexing to scale the capacity. Due to the line-of-sight propagation between the swarm and the ground station, the MIMO channel is highly correlated, leading to limited multiplexing gains. In this paper, we optimize the UAV positions to attain the maximum MIMO capacity given by the single user bound. An infinite set of UAV placements that attains the capacity bound is first derived. Given an initial swarm placement, we formulate the problem of minimizing the distance traveled by t…
In this paper, we study the joint 3D placement of unmanned aerial vehicles (UAVs) and UAVs-users association under bandwidth limitation and quality of service constraint. In particular, in order to allow to UAVs to dynamically improve their 3D locations in a distributed fashion while maximizing the network's sum-rate, we break the underlying optimization into 3 subproblems where we separately solve the 2D UAVs positioning, the altitude optimization, and the UAVs-users association. First, given fixed 3D positions of UAVs, we propose a fully distributed matching based association that alleviates…
URLLC-Aware Proactive UAV Placement in Internet of Vehicles
New Jersey Institute of Technology（新泽西理工学院）；Maynooth University（梅努斯大学）；University of Peradeniya（佩拉德尼亚大学）；University of Oulu（奥卢大学）；Khalifa University of Science and Technology（哈利法科学技术大学）；CentraleSupélec, Université Paris-Saclay（巴黎萨克雷大学中央理工-高等电力学院）
Integrating unmanned aerial vehicles (UAV) to non-orthogonal multiple access (NOMA) visible light communications (VLC) exposes many potentials over VLC and NOMA-VLC systems. In this circumstance, user grouping is of importance to reduce the NOMA decoding complexity when the number of users is large; however, this issue has not been considered in the existing study. In this paper, we aim to maximize the weighted sum-rate of all the users by jointly optimizing UAV placement, user grouping, and power allocation in downlink NOMA-VLC systems. We first consider an efficient user clustering strategy,…
Due to the sustainable power supply and environment-friendly features, self-powered IoT devices have been increasingly employed in various fields such as providing observation data in remote areas, especially in rural areas or post-disaster scenarios. Generally, through multi-hop relay, the sensed data of those self-powered IoT devices are collected by the sink node which connects to the IoT backbones. However, due to the remoteness, the sink needs to be located at the border of the monitoring area where both the backbone of IoT and electrical infrastructures are accessible. Under such deploym…
Wind power is a clean and widely deployed alternative to reducing our dependence on fossil fuel power generation. Under this trend, more turbines will be installed in wind farms. However, the inspection of the turbines in an offshore wind farm is a challenging task because of the harsh environment (e.g., rough sea, strong wind, and so on) that leads to high risk for workers who need to work at considerable height. Also, inspecting increasing number of turbines requires long man hours. In this regard, unmanned aerial vehicles (UAVs) can play an important role for automated inspection of the tur…
Recently, as a consequence of the COVID-19 pandemic, dependence on telecommunication for remote working and telemedicine has significantly increased. In cellular networks, incorporation of Unmanned Aerial Vehicles (UAVs) can result in enhanced connectivity for outdoor users due to the high probability of establishing Line of Sight (LoS) links. The UAV's limited battery life and its signal attenuation in indoor areas, however, make it inefficient to manage users' requests in indoor environments. Referred to as the Cluster centric and Coded UAV-aided Femtocaching (CCUF) framework, the network's …
In this article, we investigate the content distribution in the hotspot area, whose traffic is offloaded by the combination of the unmanned aerial vehicle (UAV) communication and edge caching. In cache-enabling UAV-assisted cellular networks, the network deployment and resource allocation are vital for quality of experience (QoE) of users with content distribution applications. We formulate a joint optimization problem of UAV deployment, caching placement and user association for maximizing QoE of users, which is evaluated by mean opinion score (MOS). To solve this challenging problem, we deco…
Deployment of unmanned aerial vehicles (UAVs) is recently getting significant attention due to a variety of practical use cases, such as surveillance, data gathering, and commodity delivery. Since UAVs are powered by batteries, energy efficient communication is of paramount importance. In this paper, we investigate the problem of lifetime maximization of a UAV-assisted network in the presence of multiple sources of interference, where the UAVs are deployed to collect data from a set of wireless sensors. We demonstrate that the placement of the UAVs play a key role in prolonging the lifetime of…
In this letter, we propose an energy-efficient 3-dimensional placement of multiple aerial access points (AAPs), in the desired area, acting as flying base stations for uplink communication from a set of ground user equipment (UE). The globally optimal energy-efficient vertical position of AAPs is derived analytically by considering the inter-cell interference and AAP energy consumption. The horizontal position of AAPs which maximize the packing density of the AAP coverage area are determined using a novel regular polygon-based AAP placement algorithm. We also determine the maximum number of no…
In this paper, we focus on energy-efficient UAV-based IoT data collection in sensor networks in which the sensed data have different time deadlines. In the investigated setting, the sensors are clustered and managed by cluster heads (CHs), and multiple UAVs are used to collect data from the CHs. The formulated problem is solved through a two-step approach. In the first step, an efficient method is proposed to determine the minimal number of CHs and their best locations. Subsequently, the minimal number of UAVs and their trajectories are obtained by solving the associated capacitated vehicle ro…
Deployment of unmanned aerial vehicles (UAVs) performing as flying aerial base stations (BSs) has a great potential of adaptively serving ground users during temporary events, such as major disasters and massive events. However, planning an efficient, dynamic, and 3D deployment of UAVs in adaptation to dynamically and spatially varying ground users is a highly complicated problem due to the complexity in air-to-ground channels and interference among UAVs. In this paper, we propose a novel distributed 3D deployment method for UAV-BSs in a downlink network for on-demand coverage. Our method cons…
Unmanned aerial vehicle (UAV) is being integrated as an active element in 5G and beyond networks. Because of its flexibility and mobility, UAV base stations (UAV-BSs) can be deployed according to the ground user distributions and their quality of service (QoS) requirement. Although there has been quite some prior research on the UAV deployment, no work has studied this problem in a 3 dimensional (3D) setting and taken into account the UAV-BS capacity limit and the quality of service (QoS) requirements of ground users. Therefore, in this paper, we focus on the problem of deploying UAV-BSs to pr…
The demand for future wireless communication systems is being satisfied for various circumstances through unmanned aerial vehicles (UAVs), which act as flying base stations (BSs). In this letter, we propose an ellipse clustering algorithm that maximizes the user coverage probability of UAV- BSs and avoids inter-cell interference with minimal transmit power. We obtain the coverage of each UAV by adjusting its antenna half-power beamwidth, orientation, and 3D location by minimizing the path loss of the cell-edge user. Simulation results confirm that the proposed algorithm achieves high system th…
For an unmanned aerial vehicle (UAV) enabled network we investigate the energy-efficiency (EE) of joint caching and cooperative communication (Fog-RAN). Since UAVs are battery- and cache-limited, placing the popular contents in the caches and managing the energy expenditure of UAVs become crucial. We formulate the energy consumption of UAVs as an aggregate of communication/caching, hovering, and vertical displacement energies, and then devise an optimization problem for optimally assigning contents to caches and choosing the height of UAVs. Adopting tools from stochastic geometry, we also deri…
Unmanned aerial vehicles (UAVs) can be used as flying base stations (BSs) to offload Macro-BSs in hotspots. However, due to the limited battery on-board, UAVs can typically stay in operation for less than 1.5 hours. Afterward, the UAV has to fly back to a dedicated charging station that recharges/replaces the UAV's battery. In this paper, we study the performance of a UAV-enabled cellular network while capturing the influence of the spatial distribution of the charging stations. In particular, we use tools from stochastic geometry to derive the coverage probability of a UAV-enabled cellular ne…
Intelligent reflecting surface (IRS) enhanced multi-unmanned aerial vehicle (UAV) non-orthogonal multiple access (NOMA) networks are investigated. A new transmission framework is proposed, where multiple UAV-mounted base stations employ NOMA to serve multiple groups of ground users with the aid of an IRS. The three-dimensional (3D) placement and transmit power of UAVs, the reflection matrix of the IRS, and the NOMA decoding orders among users are jointly optimized for maximization of the sum rate of considered networks. To tackle the formulated mixed-integer non-convex optimization problem wit…
Unmanned Aerial Vehicles (UAVs) are emerging as important users of next-generation cellular networks. By operating in the sky, UAV users experience very different radio conditions than terrestrial users, due to factors such as strong Line-of-Sight (LoS) channels (and interference) and Base Station (BS) antenna misalignment. As a consequence, the UAVs may experience significant degradation to their received quality of service, particularly when they are moving and are subject to frequent handovers. The solution is to allow the UAV to be aware of its surrounding environment, and intelligently co…
To improve the localization precision of unmanned aerial vehicle (UAV), a novel framework is established by jointly utilizing multiple measurements of received signal strength (RSS) from multiple base stations (BSs) and multiple points on trajectory. First, a joint maximum likelihood (ML) of exploiting both trajectory information and multi-BSs is proposed. To reduce its high complexity, two low-complexity localization methods are designed. The first method is from BS to trajectory (BST), called LCSL-BST. First, fixing the nth BS, by exploiting multiple measurements along trajectory, the positi…
In this paper we study the impact of unmanned aerial vehicles (UAVs) trajectories on terrestrial users' spectral efficiency (SE). Assuming a strong line of sight path to the users, the distance from all users to all UAVs influence the outcome of an online trajectory optimization. The trajectory should be designed in a way that the fairness rate is maximized over time. That means, the UAVs travel in the directions that maximize the minimum of the users' SE. From the free-space path-loss channel model, a data-rate gradient is calculated and used to direct the UAVs in a long-term perspective towa…
Volkswagen Group（大众汽车集团）；L3S Research Center, University of Hannover（汉诺威大学L3S研究中心）；University of Bonn（波恩大学）
The transition from conventional mobility to electromobility largely depends on charging infrastructure availability and optimal placement.This paper examines the optimal placement of charging stations in urban areas. We maximise the charging infrastructure supply over the area and minimise waiting, travel, and charging times while setting budget constraints. Moreover, we include the possibility of charging vehicles at home to obtain a more refined estimation of the actual charging demand throughout the urban area. We formulate the Placement of Charging Stations problem as a non-linear integer…
The mushroom growth of cellular users requires novel advancements in the existing cellular infrastructure. One way to handle such a tremendous increase is to densely deploy terrestrial small-cell base stations (TSBSs) with careful management of smart backhaul/fronthaul networks. Nevertheless, terrestrial backhaul hubs significantly suffer from the dense fading environment and are difficult to install in a typical urban environment. Therefore, this paper considers the idea of replacing terrestrial backhaul network with an aerial network consisting of unmanned aerial vehicles (UAVs) to provide t…
This paper presents a multi-stage approach to the placement of charging stations under the scenarios of different electric vehicle (EV) penetration rates. The EV charging market is modeled as the oligopoly. A consumer behavior based approach is applied to forecast the charging demand of the charging stations using a nested logit model. The impacts of both the urban road network and the power grid network on charging station planning are also considered. At each planning stage, the optimal station placement strategy is derived through solving a Bayesian game among the service providers. To inve…
This article proposes a novel framework for unmaned aerial vehicle (UAV) networks with massive access capability supported by non-orthogonal multiple access (NOMA). In order to better understand NOMA enabled UAV networks, three case studies are carried out. We first provide performance evaluation of NOMA enabled UAV networks by adopting stochastic geometry to model the positions of UAVs and ground users. Then we investigate the joint trajectory design and power allocation for static NOMA users based on a simplified two-dimensional (2D) model that UAV is flying around at fixed height. As a furt…
Fifth Generation (5G) cellular networks are expected to provide cellular connectivity for vehicular users, including Unmanned Aerial Vehicles (UAVs). When flying in the air, these users experience strong, unobstructed channel conditions to a large number of Base Stations (BSs) on the ground. This creates very strong interference conditions for the UAV users, while at the same time offering them a large number of BSs to potentially associate with for cellular service. Therefore, to maximise the performance of the UAV-BS wireless link, the UAV user needs to be able to choose which BSs to connect…
Intelligent reflective surfaces (IRSs) capable of reconfiguring their electromagnetic absorption and reflection properties in real-time are offering unprecedented opportunities to enhance wireless communication experience in challenging environments. In this paper, we analyze the potential of IRS in enhancing cellular communications for UAVs, which currently suffers from poor signal strength due to the down-tilt of base station antennas optimized to serve ground users. We consider deployment of IRS on building walls, which can be remotely configured by cellular base stations to coherently dire…
