In this paper, we consider an Unmanned Aerial Vehicle (UAV)-assisted cellular system which consists of multiple UAV base stations (BSs) cooperating the terrestrial BSs. In such a heterogeneous network, for cellular operators, the problem is how to determine the appropriate number, locations, and altitudes of UAV-BSs to improve the system sumrate as well as satisfy the demands of arbitrarily flash crowds on data rates. We propose a data-driven 3D placement of UAV-BSs for providing an effective placement result with a feasible computational cost. The proposed algorithm searches for the appropriate number, location, coverage, and altitude of each UAV-BS in the serving area with the maximized system sumrate in polynomial time so as to guarantee the minimum data rate requirement of UE. The simulation results show that the proposed approach can improve system sumrate in comparison with the case without UAV-BSs.
New Mexico Tech（新墨西哥理工学院）；Amir Kabir University of Technology（阿米尔·卡比尔理工大学）；Utah Valley university（犹他谷大学）
Temporary high traffic requests in cellular networks is a challenging problem to address. Recent advances in Unmanned Aerial Vehicles applied to cover these types of traffics. UAV -Mounted Mobile Base Stations placement is a challenging problem to achieve high performance. Different approaches have been proposed; however, user required traffic is not considered in UAV placement. We propose a new feature to apply to K-means clustering to find the optimum clusters. User required traffic is defined as a new feature to assign users to the UAVs. Our simulation results show that UAVs could be placed…
This paper studies the improvement of the achievable end-to-end data rate of ground users assisted with unmanned aerial vehicles (UAVs) and tethered balloons (TBs). The goal is to maximize the end-to-end throughput of a network suffering from the absence of terrestrial infrastructure. First, we solve an integer linear programming problem to optimize the associations. Then, we solve the UAVs transmit powers optimally by converting the problem into a convex one. Subsequently, an efficient algorithm is proposed to optimize the UAVs placement. Finally, our mathematical formalism is illustrated wit…
National Chiao Tung University（国立交通大学）；University of Houston（休斯顿大学）
The unmanned aerial vehicles base stations (UAV-BSs) have great potential in being widely used in many dynamic application scenarios. In those scenarios, the movements of served user equipments (UEs) are inevitable, so the UAV-BSs needs to be re-positioned dynamically for providing seamless services. In this paper, we propose a system framework consisting of UEs clustering, UAV-BS placement, UEs trajectories prediction, and UAV-BS reposition matching scheme, to serve the UEs seamlessly as well as minimize the energy cost of UAV-BSs' reposition trajectories. An Echo State Network (ESN) based al…
Unmanned Aerial Vehicles (UAVs) have been extensively utilized to provide wireless connectivity in rural and under-developed areas, enhance network capacity and provide support for peaks or unexpected surges in user demand, mainly due to their fast deployment, cost-efficiency and superior communication performance resulting from Line of Sight (LoS)-dominated wireless channels. In order to exploit the benefits of UAVs as base stations or relays in a mobile network, a major challenge is to determine the optimal UAV placement and relocation strategy with respect to the mobility and traffic patter…
A swarm of cooperating UAVs communicating with a distant multiantenna ground station can leverage MIMO spatial multiplexing to scale the capacity. Due to the line-of-sight propagation between the swarm and the ground station, the MIMO channel is highly correlated, leading to limited multiplexing gains. In this paper, we optimize the UAV positions to attain the maximum MIMO capacity given by the single user bound. An infinite set of UAV placements that attains the capacity bound is first derived. Given an initial swarm placement, we formulate the problem of minimizing the distance traveled by t…
URLLC-Aware Proactive UAV Placement in Internet of Vehicles
New Jersey Institute of Technology（新泽西理工学院）；Maynooth University（梅努斯大学）；University of Peradeniya（佩拉德尼亚大学）；University of Oulu（奥卢大学）；Khalifa University of Science and Technology（哈利法科学技术大学）；CentraleSupélec, Université Paris-Saclay（巴黎萨克雷大学中央理工-高等电力学院）
Aerial networks, composed of Unmanned Aerial Vehicles (UAVs) acting as Wi-Fi access points or cellular base stations, are emerging as an interesting solution to provide on-demand wireless connectivity to users, when there is no network infrastructure available, or to enhance the network capacity. This article proposes a traffic-aware topology control solution for aerial networks that holistically combines the placement of UAVs with a predictive and centralized routing protocol. The synergy created by the combination of the UAV placement and routing solutions allows the aerial network to seamle…
In this paper, we consider an unmanned aerial vehicle (UAV) enabled relaying system where multiple UAVs are deployed as aerial relays to support simultaneous communications from a set of source nodes to their destination nodes on the ground. An optimization problem is formulated under practical channel models to maximize the minimum achievable expected rate among all pairs of ground nodes by jointly designing UAVs' three-dimensional (3D) placement as well as the bandwidth-and-power allocation. This problem, however, is non-convex and thus difficult to solve. As such, we propose a new method, c…
Unmanned Aerial Vehicles (UAVs) acting as Flying Access Points (FAPs) are being used to provide on-demand wireless connectivity in extreme scenarios. Despite ongoing research, the optimization of UAVs' positions according to dynamic users' traffic demands remains challenging. We propose the Traffic-aware UAV Placement Algorithm (TUPA), which positions a UAV acting as FAP according to the users' traffic demands, in order to maximize the network utility. Using a DRL approach enables the FAP to autonomously learn and adapt to dynamic conditions and requirements of networking scenarios. Moreover, …
Integrating unmanned aerial vehicles (UAV) to non-orthogonal multiple access (NOMA) visible light communications (VLC) exposes many potentials over VLC and NOMA-VLC systems. In this circumstance, user grouping is of importance to reduce the NOMA decoding complexity when the number of users is large; however, this issue has not been considered in the existing study. In this paper, we aim to maximize the weighted sum-rate of all the users by jointly optimizing UAV placement, user grouping, and power allocation in downlink NOMA-VLC systems. We first consider an efficient user clustering strategy,…
Unmanned aerial vehicles (UAVs), as aerial base stations, are a promising solution for providing wireless communications, thanks to their high flexibility and autonomy. Moreover, emerging services, such as extended reality, require high-capacity communications. To achieve this, millimeter wave (mmWave), and recently, terahertz bands have been considered for UAV communications. However, communication at these high frequencies requires a line-of-sight (LoS) to the terminals, which may be located in 3D space and may have extremely limited direct-line-of-view (LoV) due to blocking objects, like bu…
Unmanned aerial vehicles serving as aerial base stations (UAV-BSs) can be deployed to provide wireless connectivity to ground devices in events of increased network demand, points-of-failure in existing infrastructure, or disasters. However, it is challenging to conserve the energy of UAVs during prolonged coverage tasks, considering their limited on-board battery capacity. Reinforcement learning-based (RL) approaches have been previously used to improve energy utilization of multiple UAVs, however, a central cloud controller is assumed to have complete knowledge of the end-devices' locations,…
The ability to operate virtually anywhere and carry payload makes Unmanned Aerial Vehicles (UAVs) perfect platforms to carry communications nodes, including Wi-Fi Access Points (APs) and cellular Base Stations (BSs). This is paving the way to the deployment of flying networks that enable communications to ground users on demand. Still, flying networks impose significant challenges in order to meet the Quality of Experience expectations. State of the art works addressed these challenges, but have been focused on routing and the placement of the UAVs as APs and BSs serving the ground users, over…
One of the main challenges slowing the deployment of airborne base stations (BSs) using unmanned aerial vehicles (UAVs) is the limited on-board energy and flight time. One potential solution to such problem, is to provide the UAV with power supply through a tether that connects the UAV to the ground. In this paper, we study the optimal placement of tethered UAVs (TUAVs) to minimize the average path-loss between the TUAV and a receiver located on the ground. Given that the tether has a maximum length, and the launching point of the TUAV (the starting point of the tether) is placed on a rooftop,…
Unmanned aerial vehicles (UAVs) are being successfully used to deliver communication services in applications such as extending the coverage of 5G cellular networks in remote areas, emergency situations, and enhancing the service quality in regions of dense user populations. While optimized placement solutions have been proposed in literature for ensuring quality of service (QoS) of users, they may not be ideal in highly mobile, autonomous, and diverse network scenarios. This paper proposes a proactive and resilient framework for distributed and dynamic orchestration of UAV small cells to prov…
This paper presents a new method for recharging flying base stations, carried by Unmanned Aerial Vehicles (UAVs), using wireless power transfer from dedicated, airborne, Radio Frequency (RF) energy sources. In particular, we study a system in which UAVs receive wireless power without being disrupted from their regular trajectory. The optimal placement of the energy sources are studied so as to maximize received power from the energy sources by the receiver UAVs flying with a linear trajectory over a square area. We find that for our studied scenario of two UAVs, if an even number of energy sou…
As an emerging field of aerial robotics, Unmanned Aerial Vehicles (UAVs) have gained significant research interest within the wireless networking research community. As soon as national legislations allow UAVs to fly autonomously, we will see swarms of UAV populating the sky of our smart cities to accomplish different missions: parcel delivery, infrastructure monitoring, event filming, surveillance, tracking, etc. The UAV ecosystem can benefit from existing 5G/B5G cellular networks, which can be exploited in different ways to enhance UAV communications. Because of the inherent characteristics …
Unmanned Aerial Vehicle (UAV) systems are being increasingly used in a broad range of scenarios and applications. However, their deployment in urban areas poses important technical challenges. One of the most prominent concerns is the robustness of communications between the ground stations and the UAVs in a highly dynamic and crowded spectrum. Indeed, competing data streams may create local or temporary congestion impairing the ground stations to control the UAVs. The main contribution of this paper is a robust multi-path communication framework for UAV systems. The framework continuously pro…
Deployment of unmanned aerial vehicles (UAVs) performing as flying aerial base stations (BSs) has a great potential of adaptively serving ground users during temporary events, such as major disasters and massive events. However, planning an efficient, dynamic, and 3D deployment of UAVs in adaptation to dynamically and spatially varying ground users is a highly complicated problem due to the complexity in air-to-ground channels and interference among UAVs. In this paper, we propose a novel distributed 3D deployment method for UAV-BSs in a downlink network for on-demand coverage. Our method cons…
We consider unmanned aerial vehicle (UAV)-assisted wireless communication employing UAVs as relay nodes to increase the throughput between a pair of transmitter and receiver. We focus on developing effective methods to position the UAV(s) in the sky in the presence of interference in the environment, the existence of which makes the problem non-trivial and our methodology different from the current art. We study the optimal position planning, which aims to maximize the (average) signal-to-interference-ratio (SIR) of the system, in the presence of: i) one major source of interference, ii) stoch…
