In the present work, we use Mach-Zehnder interferometry to thoroughly investigate the drying dynamics of a 2D confined drop of a charged colloidal dispersion. This technique makes it possible to measure the colloid concentration field during the drying of the drop at a high accuracy (about 0.5%) and with a high temporal and spatial resolution (about 1 frame/s and 5 $μ$m/pixel). These features allow us to probe mass transport of the charged dispersion in this out-of-equilibrium situation. In particular, our experiments provide the evidence that mass transport within the drop can be described by a purely diffusive process for some range of parameters for which the buoyancy-driven convection is negligible. We are then able to extract from these experiments the collective diffusion coefficient of the dispersion $D(φ)$ over a wide concentration range $φ=0.24$-$0.5$, i.e. from the liquid dispersed state to the solid glass regime, with a high accuracy. The measured values of $D(φ)\simeq 5$-$12 D_0$ are significantly larger than the simple estimate $D_0$ given by the Stokes-Einstein relation, thus highlighting the important role played by the colloidal interactions in such dispersions.
Drying of colloidal dispersion and their consolidation into a particulate deposit is a common phenomenon. This process involves various physical processes such as diffusion of liquid molecules into the ambient atmosphere and advection of dispersed particles via evaporation driven flow. The colloidal particles forming a dried deposit exhibits distinct patterns and frequently possess structural defects such as desiccation cracks. This chapter gives an introductory review of the drying of colloidal dispersion and various associated phenomena. In principle, the drying of colloid dispersion, the pr…
We performed a thorough investigation of the drying dynamics of a charged colloidal dispersion drop in a confined geometry. We developed an original methodology based on Raman micro-spectroscopy to measure spatially-resolved colloids concentration profiles during the drying of the drop. These measurements lead, for the first time, to estimates of the collective diffusion coefficient of the dispersion over a wide range of concentration. The collective diffusion coefficient is one order of magnitude higher than the Stokes-Einstein estimate showing the importance of the electrostatic interactions…
We study the stress developed during the drying of a colloidal drop of silica nanoparticles. In particular, we use the wrinkling instability of a thin floating sheet to measure the net stress applied by the deposit on the substrate and we focus on the effect of the particle polydispersity. In the case of a bidisperse suspension, we show that a small number of large particles substantially decreases the expected stress, which we interpret as the formation of lower hydrodynamic resistance paths in the porous material. As colloidal suspensions are usually polydisperse, we show for different avera…
When a liquid film of colloidal solution consisting of particles of different sizes is dried on a substrate, the colloids often stratify, where smaller colloids are laid upon larger colloids. This phenomenon is counter intuitive because larger colloids which have smaller diffusion constant are expected to remain near the surface during the drying process, leaving the layer of larger colloids on top of smaller colloids. Here we show that the phenomenon is caused by the interaction between the colloids, and can be explained by the diffusion model which accounts for the interaction between the co…
Exploring the role of hydrodynamic interactions in spherically-confined drying colloidal suspensions
Auburn University（奥本大学）；Leibniz-Institut für Polymerforschung Dresden e.V.（德累斯顿莱布尼茨聚合物研究所）；Technische Universität Dresden（德累斯顿工业大学）；Johannes Gutenberg University Mainz（美因茨约翰内斯·古腾堡大学）
Dynamic density functional theory (DDFT) is a promising approach for predicting the structural evolution of a drying suspension containing one or more types of colloidal particles. The assumed free-energy functional is a key component of DDFT that dictates the thermodynamics of the model and, in turn, the density flux due to a concentration gradient. In this work, we compare several commonly used free-energy functionals for drying hard-sphere suspensions including local-density approximations based on the ideal-gas, virial, and Boublík-Mansoori-Carnahan-Starling-Leland (BMCSL) equations of sta…
-- A scientific hurdle in manufacturing solid films by drying colloidal layers is preventing them from fracturing. This paper examines how the drying rate of colloidal liquids influences the particle packing at the nanoscale in correlation with the crack patterns observed at the macroscale. Increasing the drying rate results in more ordered, denser solid structures, and the dried samples have more cracks.Yet, introducing a holding period (at a prescribed point) during the drying protocol results in a more disordered solid structure with significantly less cracks. To interpret these observation…
From suspensions to porous multilayers: microstructure formation and particle packing in drying colloidal films
Helmholtz Institute Erlangen-Nürnberg for Renewable Energy (IET-2), Forschungszentrum Jülich（于利希研究中心埃尔朗根-纽伦堡亥姆霍兹可再生能源研究所（IET-2））；Friedrich-Alexander-Universität Erlangen-Nürnberg（埃尔朗根-纽伦堡弗里德里希·亚历山大大学）
In simulations and experiments, we study the drying of films containing mixtures of large and small colloidal particles in water. During drying, the mixture stratifies into a layer of the larger particles at the bottom with a layer of the smaller particles on top. We developed a model to show that a gradient in osmotic pressure, which develops dynamically during drying, is responsible for the segregation mechanism behind stratification.
We develop a dynamical density functional theory based model for the drying of colloidal films on planar surfaces. We consider mixtures of two different sizes of hard-sphere colloids. Depending on the solvent evaporation rate and the initial concentrations of the two species, we observe varying degrees of stratification in the final dried films. Our model predicts the various structures described in the literature previously from experiments and computer simulations, in particular the small-on-top stratified films. Our model also includes the influence of adsorption of particles to the interfa…
The process of colloidal drying gives way to particle self-assembly in numerous elds including photonics or biotechnology. Yet, the mechanisms and conditions driving the nal particle arrangement in dry colloidal layers remain elusive. Here, we examine how the drying rate selects the nanostructure of thick dried layers in four dierent suspensions of silica nanospheres. Depending on particle size and dispersity, either an amorphous arrangement, a crystalline arrangement, or a rate-dependent amorphous-to-crystalline transition occurs at the drying surface. Amorphous arrangements are observed in t…
Understanding the relationship between colloidal building block shape and self-assembled material structure is important for the development of novel materials by self-assembly. In this regard, colloidal superballs are unique building blocks because their shape can smoothly transition between spherical and cubic. Assembly of colloidal superballs under spherical confinement results in macroscopic clusters with ordered internal structure. By utilizing Small Angle X-Ray Scattering (SAXS), we probe the internal structure of colloidal superball dispersion droplets during confinement. We observe and…
Directional drying of a colloidal dispersion: quantitative description with water potential measurements using water clusters in a poly(dimethylsiloxane) microfluidic chip
The deposition of particles on a substrate by drying a colloidal suspension droplet is at the core of applications ranging from traditional printing on paper to printable electronics or photovoltaic devices. The self-pinning induced by the accumulation of particles at the contact line plays an important role in the formation of the deposition. In this paper, we investigate both numerically and theoretically, the effect of friction between the particles and the substrate on the deposition pattern. Without friction, the contact line shows a stick-slip behaviour and a dot-like deposit is left aft…
Charged colloidal dispersions make up the basis of a broad range of industrial and commercial products, from paints to coatings and additives in cosmetics. During drying, an initially liquid dispersion of such particles is slowly concentrated into a solid, displaying a range of mechanical instabilities in response to highly variable internal pressures. Here we summarise the current appreciation of this process by pairing an advection-diffusion model of particle motion with a Poisson-Boltzmann cell model of inter-particle interactions, to predict the concentration gradients around a drying coll…
Image processing and pattern recognition offer a useful and versatile method for optically characterizing drops of a colloidal solution during the drying process and in its final state. This paper exploits image processing techniques applied to cross-polarizing microscopy to probe birefringence and the bright-field microscopy to examine the morphological patterns. The bio-colloidal solution of interest is a mixture of water, liquid crystal (LC) and three different proteins [lysozyme (Lys), myoglobin (Myo), and bovine serum albumin (BSA)], all at a fixed relative concentration. During the dryin…
The work is devoted to particles dynamics simulation in a colloidal drop, when it dries on a substrate and the triple-phase boundary is fixed. Experimental observations [Deegan R. D. et. al., 2000] show a ring deposition on a solid substrate after full droplet desiccation. This phenomenon of macrolevel is known as coffee ring effect. There are other experiments that show a co-effect at the microlevel. We are talking about the formation of a quasicrystalline structure on the outer part of the ring and occurrence amorphous inner zone of ring [Mar\'ın Á. G. et. al., 2011]. The goal of this work i…
A colloidal particle placed in an inhomogeneous solution of smaller non-adsorbing polymers will move towards regions of lower polymer concentration, in order to reduce the free energy of the interface between the surface of the particle and the solution. This phenomenon is known as diffusiophoresis. Treating the polymer as penetrable hard spheres, as in the Asakura-Oosawa model, a simple analytic expression for the diffusiophoretic drift velocity can be obtained. In the context of drying films we show that diffusiophoresis by this mechanism can lead to stratification under easily accessible ex…
This short review is devoted to the simple process of drying a multi-component droplet consisting of a complex fluid containing a salt. These processes provide a fascinating subject for study. The explanation of the rich variety of patterns formed is not only an academic challenge, but a problem of practical importance, as applications are growing in medical diagnosis and improvement of coating/printing technology. The fundamental scientific problem is the study of the mechanism of micro- and nanoparticle self-organization in open systems. The specific fundamental problem to be solved, related…
The deposition process at the edge of evaporating colloidal drops varies with the shape of suspended particles. Experiments with prolate ellipsoidal particles suggest that the spatiotemporal properties of the deposit depend strongly on particle aspect ratio. As the aspect ratio increases, the particles form less densely-packed deposits and the statistical behavior of the deposit interface crosses over from the Kardar-Parisi-Zhang (KPZ) universality class to another universality class which was suggested to be consistent with the KPZ plus quenched disorder. Here, we numerically study the effect…
The present article highlights an approach to generate contrasting patterns from drying droplets in a liquid bridge configuration, different from well-known coffee rings. Reduction of the confinement distance (the gap between the solid surfaces) leads to systematized nano-particle agglomeration yielding to spokes-like patterns similar to those found on scallop shells instead of circumferential edge deposition. Alteration of the confinement length modulates the curvature that entails variations in the evaporation flux across the liquid-vapor interface. Consequently, flow inside different liquid…
I model the drying of a liquid film containing small and big colloid particles. Fortini et al. [A. Fortini et al, Phys. Rev. Lett. 116, 118301 (2016)] studied these films with both computer simulation and experiment. They found that at the end of drying the mixture had stratified with a layer of the smaller particles on top of the big particles. I develop a simple model for this process. The model has two ingredients: arrest of the diffusion of the particles at high density, and diffusiophoretic motion of the big particles due to gradients in the concentration of the small particles. The model…
We develop a theory for drying-induced stresses in sessile, poroelastic drops undergoing evaporation on rigid surfaces. Using a lubrication-like approximation, the governing equations of three-dimensional nonlinear poroelasticity are reduced to a single thin-film equation for the drop thickness. We find that thin drops experience compressive elastic stresses but the total in-plane stresses are tensile. The mechanical response of the drop is dictated by the initial profile of the solid skeleton, which controls the in-plane deformation, the dominant components of elastic stress, and sets a limit…
We propose a theoretical framework to calculate capillary stresses in complex mesoporous materials, such as moist sand, nanoporous hydrates, and drying colloidal films. Molecular simulations are mapped onto a phase-field model of the liquid-vapor mixture, whose inhomogeneous stress tensor is integrated over Voronoi polyhedra in order to calculate equal and opposite forces between each pair of neighboring grains. The method is illustrated by simulations of moisture-induced forces in small clusters and random packings of spherical grains using lattice-gas Density Functional Theory. For a nano-gr…
The vertical drying of a colloidal film containing rod-like particles was studied by means of kinetic Monte Carlo (MC) simulation. The problem was approached using a two-dimensional square lattice and the rods were represented as linear $k$-mers (i.e., particles occupying $k$ adjacent sites). The initial state before drying was produced using a model of random sequential adsorption (RSA) with isotropic orientations of the $k$-mers (orientation of the $k$-mers along horizontal $x$ and vertical $y$ directions are equiprobable). In the RSA model, overlapping of the $k$-mers is forbidden. During t…
The drying of a drop containing particles often results in the accumulation of the particles at the contact line. In this work, we investigate the drying of an aqueous colloidal drop surrounded by a hydrogel that is also evaporating. We combine theoretical and experimental studies to understand how the surrounding vapor concentration affects the particle deposit during the constant radius evaporation mode. In addition to the common case of evaporation on an otherwise dry surface, we show that in a configuration where liquid is evaporating from a flat surface around the drop, the singularity of…
